Search NASA⌕ Search

SEARCH · Search NASA

Results for “spectroscopic methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Compositional analysis of GaAs/AlGaAs heterostructures using quantitative scanning transmission electron microscopy

We demonstrate a method for compositional mapping of Al{sub x}Ga{sub 1–x}As heterostructures with high accuracy and unit cell spatial resolution using quantitative high angle annular dark field scanning transmission electron microscopy. The method is low dose relative to spectroscopic methods and insensitive to the effective source size and higher order lens aberrations. We apply the method to study the spatial variation in Al concentration in cross-sectioned GaAs/AlGaAs core-shell nanowires and quantify the concentration in the Al-rich radial band and the AlGaAs shell segments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Catalytic Chemistry on Oxide Nanostructures

Metal oxides represent one of the most important and widely employed materials in catalysis. Extreme variability of their chemistry provides a unique opportunity to tune their properties and to utilize them for the design of highly active and selective catalysts. For bulk oxides, this can be achieved by varying their stoichiometry, phase, exposed surface facets, defect, dopant densities and numerous other ways. Further, distinct properties from those of bulk oxides can be attained by restricting the oxide dimensionality and preparing them in the form of ultrathin films and nanoclusters as discussed throughout this book. In this chapter we focus on demonstrating such unique catalytic properties brought by the oxide nanoscaling. In the highlighted studies planar models are carefully designed to achieve minimal dispersion of structural motifs and to attain detailed mechanistic understanding of targeted chemical transformations. Detailed level of morphological and structural characterization necessary to achieve this goal is accomplished by employing both high-resolution imaging via scanning probe methods and ensemble-averaged surface sensitive spectroscopic methods. Three prototypical examples illustrating different properties of nanoscaled oxides in different classes of reactions are selected.

Asthagiri, Aravind↗

Time-dependent density functional approach for the calculation of inelastic x-ray scattering spectra of molecules

We apply time-dependent density functional theory to study the valence electron excitations of molecules and generalize the typically used time-propagation scheme and Casida's method to calculate the full wavevector dependent response function. This allows the computational study of dipole-forbidden valence electron transitions and the dispersion of spectral weight as a function of the wavevector. The method provides a novel analysis tool for spectroscopic methods such as inelastic x-ray scattering and electron energy loss spectroscopy. We present results for benzene and CF{sub 3}Cl and make a comparison with experimental results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Compact, Tunable Near-UV Source for Quantitative Microgravity Combustion Diagnostics

There is a need for improved optical diagnostic methods for use in microgravity combustion research. Spectroscopic methods with fast time response that can provide absolute concentrations and concentration profiles of important chemical species in flames are needed to facilitate the understanding of combustion kinetics in microgravity. Although a variety of sophisticated laser-based diagnostics (such as planar laser induced fluorescence, degenerate four wave mixing and coherent Raman methods) have been applied to the study of combustion in laboratory flames, the instrumentation associated with these methods is not well suited to microgravity drop tower or space station platforms. Important attributes of diagnostic systems for such applications include compact size, low power consumption, ruggedness, and reliability. We describe a diode laser-based near-UV source designed with the constraints of microgravity research in mind. Coherent light near 420 nm is generated by frequency doubling in a nonlinear crystal. This light source is single mode with a very narrow bandwidth suitable for gas phase diagnostics, can be tuned over several 1/cm and can be wavelength modulated at up to MHz frequencies. We demonstrate the usefulness of this source for combustion diagnostics by measuring CH radical concentration profiles in an atmospheric pressure laboratory flame. The radical concentrations are measured using wavelength modulation spectroscopy (WMS) to obtain the line-of-sight integrated absorption for different paths through the flame. Laser induced fluorescence (LIF) measurements are also demonstrated with this instrument, showing the feasibility of simultaneous WMS absorption and LIF measurements with the same light source. LIF detection perpendicular to the laser beam can be used to map relative species densities along the line-of-sight while the integrated absorption available through WMS provides a mathematical constraint on the extraction of quantitative information from the LIF data. Combining absorption with LIF - especially if the measurements are made simultaneously with the same excitation beam - may allow elimination of geometrical factors and effects of intensity fluctuations (common difficulties with the analysis of LIF data) from the analysis.

Peterson, K. A.↗

Whispering Gallery Optical Resonator Spectroscopic Probe and Method

Disclosed herein is a spectroscopic probe comprising at least one whispering gallery mode optical resonator disposed on a support, the whispering gallery mode optical resonator comprising a continuous outer surface having a cross section comprising a first diameter and a second diameter, wherein the first diameter is greater than the second diameter. A method of measuring a Raman spectrum and an Infra-red spectrum of an analyte using the spectroscopic probe is also disclosed.

Anderson, Mark S.↗

Optical measurement methods in thermogasdynamics

A review is presented of a number of optical methods of flow measurements. Consideration is given to such spectroscopic methods as emission and absorption techniques, electron beam-stimulated fluorescence, and light scattering - Rayleigh, Raman and Mie - methods. The following visualization methods are also discussed: shadow photography, schlieren photography, interferometry, holographic interferometry, laser anemometry, particle holography, and electron-excitation imaging. A large bibliography is presented and the work is copiously illustrated with figures and photographs.

Stursberg, K.↗

Review of methodology and technology available for the detection of extrasolar planetary systems

Four approaches exist for the detection of extrasolar planets. According to the only direct method, the planet is imaged at some wavelength in a manner which makes it possible to differentiate its own feeble luminosity (internal energy source plus reflected starlight) from that of the nearby host star. The three indirect methods involve the detection of a planetary mass companion on the basis of the observable effects it has on the host star. A search is conducted regarding the occurrence of regular, periodic changes in the stellar spatial motion (astrometric method) or the velocity of stellar emission line spectra (spectroscopic method) or in the apparent total stellar luminosity (photometric method). Details regarding the approaches employed for implementing the considered methods are discussed.

Tarter, J. C.↗

Interactions of Chemical Contaminants to Steel and Concrete Via Spectroscopic and Computational Methods - 18398

There is limited understanding of the scientific interaction of the chemical contaminants to DOE facility materials which can alter the stability of the materials, and in turn, affecting the general safety. In addition, the materials themselves can be considered secondary waste and decontamination is necessary. Therefore, the overall goal of this project is to determine the physiochemical interactions of Hg and Cs to steel and concrete using spectroscopic, adsorption and computational studies. To achieve the overall goal, this proposal has the following objectives: 1) Evaluate the physicochemical interactions of Hg and Cs to steel and concrete using spectroscopic techniques under standard conditions and 2) Evaluate the impact of environmental conditions (temp., salt content, pH, and time) on the physicochemical interactions of Hg and Cs to steel and concrete using spectroscopic techniques. Less labor intensive than traditional wet chemical analyses, spectroscopic methods have the advantage of elucidating both structural and chemical changes at the micro to nano-scale. The potential impacts of the proposed work could lead to cost effective decontamination methods, minimize secondary waste, and reduce worker exposure. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Investigation of a polychromatic tomography method for the extraction of the three-dimensional spatial structure of implosion core plasmas

A spectroscopic method has been developed to extract the three-dimentional spatial structure (i.e., spatial distribution of electron temperature and density) of inertial confinement fusion implosion cores based on the analysis of space-resolved spectra from a tracer element recorded along three quasi-orthogonal lines of sight. We discuss a spectral model that computes space-resolved spectra for a given spatial structure. This model is then combined with a multi-objective search and optimization technique driven by a Pareto genetic algorithm to perform the inversion and to extract the spatial structure of the implosion core from a simultaneous and self-consistent analysis of a set of space-resolved spectra. This method is investigated with a series of synthetic data test cases to explore its reliability, requirements, and limitations. We have found a constraint parameter P{sub const} such that the method is robust and the extracted spatial structure is reliable when P{sub const}> 1. The idea of polychromatic tomography is general and has potential to extract the spatial structure of other laboratory high energy-density plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Probing local bias-induced transitions using photothermal excitation contact resonance atomic force microscopy and voltage spectroscopy

In this paper, nanomechanical properties are closely related to the states of matter, including chemical composition, crystal structure, mesoscopic domain configuration, etc. Investigation of these properties at the nanoscale requires not only static imaging methods, e.g., contact resonance atomic force microscopy (CR-AFM), but also spectroscopic methods capable of revealing their dependence on various external stimuli. Here we demonstrate the voltage spectroscopy of CR-AFM, which was realized by combining photothermal excitation (as opposed to the conventional piezoacoustic excitation method) with the band excitation technique. We applied this spectroscopy to explore local bias-induced phenomena ranging from purely physical to surface electromechanical and electrochemical processes. Our measurements show that the changes in the surface properties associated with these bias-induced transitions can be accurately assessed in a fast and dynamic manner, using resonance frequency as a signature. Finally, with many of the advantages offered by photothermal excitation, contact resonance voltage spectroscopy not only is expected to find applications in a broader field of nanoscience but also will provide a basis for future development of other nanoscale elastic spectroscopies.

36 MATERIALS SCIENCE↗

Online monitoring of solutions within microfluidic chips: simultaneous Raman and UV-Vis absorption spectroscopies

Microfluidics is an appealing analytical tool in the global effort to close the nuclear fuel cycle. Using a microfluidic chip permits analysis of greatly reduced sample volumes compared to what is necessary for traditional analytical methods. There is a commensurate reduction in disposal volume and cost. Development of spectroscopic methods practicable on the microscale are necessary to take advantage of the microchip configuration. This study uses simultaneously applied UV-vis and micro-Raman spectroscopies adapted to function on the microscale to analyze in situ both the Nd3+ (UV-vis active) and HNO3 (Raman active) concentrations in the same sample. An adjustable translation platform was designed to hold the micro-Raman probe above and perpendicular to the chip face, and the UV-vis probe in the plane of the chip. These complimentary spectral techniques when processed through multivariate PLS (Partial Least Squares) models gave an accurate picture of the widely varying solution concentrations as a function of time for each solution component. Solution matrix effects can drastically alter analyte signatures as measured by both UV-vis absorbance and Raman spectroscopy. PLS methods successfully modeled these spectral changes and accurately measured concentrations of components of interest within the microfluidic chip.

on-line monitoring, microfluidics, Raman, UV-vis↗

Progress and Goals for INMM ASC N15 Consensus Standard "Administrative Practices for the Determination and Reporting of Results of Non-Destructive Assay Measurements of Nuclear Material in Situ for Safeguards Nuclear Criticality Safety and Other Purposes"

This paper will discuss the goals and progress to date on the development of INMM Accredited Standard Committee (ASC) N15 consensus standard Administrative Practices for the Determination and Reporting of Results of Non-Destructive Assay Measurements of Nuclear Material in situ for Safeguards, Nuclear Criticality Safety, and Other Purposes. This standard will define administrative practices in the areas of data generation and reporting of NDA assay of holdup deposits with consideration of the stakeholders of the reported results. These stakeholders may include nuclear material accounting and safeguards, nuclear criticality safety, waste management, health physics, facility characterization, authorization basis, radiation safety, and site licensing authorities. Stakeholder input will be solicited from interested parties and incorporated during the development of the document. Currently only one consensus standard exists that explicitly deals with NDA holdup measurements: ASTM C1455 Standard Test Method for Nondestructive Assay of Special Nuclear Material Holdup Using Gamma-Ray Spectroscopic Methods. The ASTM International standard emphasizes the activities involved in actually making measurements and was developed by safeguards and NDA experts. This new INMM ASC N15 standard will complement the existing ASTM international standard. One of the largest driving factors for writing this new standard was the recent emphasis on in situ NDA measurements by the safeguards community due to the Defense Nuclear Facility Safety Board (DNFSB) recommendation 2007-1 on in situ NDA measurements. Specifically, DNFSB recommendation 2007-1 referenced the lack of programmatic requirements for accurate in situ measurements and the use of measurement results for compliance with safety-based requirements. That being the case, this paper will also discuss the progress made on the Implementation Plan for Defense Nuclear Facilities Safety Board Recommendation 2007-1 Safety-Related In Situ Nondestructive Assay of Radioactive Materials. Some of the information that will be presented includes observations made during site visits, how information useful to all facilities using nondestructive assay to determine holdup material quantities will be disseminated, and preliminary results of a gap analysis performed on current in situ nondestructive assay holdup measurements.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Partial Least Squares Regression Calibration of an Ultraviolet-Visible Spectrophotometer for Measurements of Chemical Oxygen Demand in Dye Wastewater

Wastewater from the dye industry is typically analyzed using a standard method for measurement of chemical oxygen demand (COD) or by a single-wavelength spectroscopic method. To overcome the disadvantages of these methods, ultraviolet-visible (UV-Vis) spectroscopy was combined with principal component regression (PCR) and partial least squares regression (PLSR) in this study. Unlike the standard method, this method does not require digestion of the samples for preparation. Experiments showed that the PLSR model offered high prediction performance for COD, with a mean relative error of about 5% for two dyes. This error is similar to that obtained with the standard method. In this study, the precision of the PLSR model decreased with the number of dye compounds present. It is likely that multiple models will be required in reality, and the complexity of a COD monitoring system would be greatly reduced if the PLSR model is used because it can include several dyes. UV-Vis spectroscopy with PLSR successfully enhanced the performance of COD prediction for dye wastewater and showed good potential for application in on-line water quality monitoring.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

HIGH-MODE RAYLEIGH-TAYLOR GROWTH IN NIF IGNITION CAPSULES

An assessment of short wavelength hydrodynamic stability is an essential component in the optimization of NIF ignition target designs. Using highly-resolved massively-parallel 2-D Hydra simulations, we routinely evaluate target designs up to mode numbers of 2000 ({lambda} {approx} 2 {micro}m). On the outer ablator surface, mode numbers up to {approx}300 ({lambda} {approx} 20 {micro}m) can have significant growth in CH capsule designs. At the internal fuel:ablator interface mode numbers up to {approx}2000 are important for both CH and Be designs. In addition, 'isolated features' on the capsule, such as the 'fill-tube' ({approx} 5 {micro}m scale-length) and defects, can seed short wavelength growth at the ablation front and the fuel:ablator interface, leading to the injection of {approx} 10's ng of ablator material into the central hot-spot. We are developing methods to measure high-mode mix on NIF implosion experiments. X-ray spectroscopic methods are appealing since mix into the hot-spot will result in x-ray emission from the high-Z dopant (Cu or Ge) in the ablator material (Be or CH).

42 ENGINEERING↗

Study of asymmetries of Cd(Zn)Te devices investigated using photo-induced current transient spectroscopy, Rutherford backscattering, surface photo-voltage spectroscopy, and gamma ray spectroscopies

Despite these recent advancements in preparing the surface of Cd(Zn)Te devices for detector applications, large asymmetries in the electronic properties of planar Cd(Zn)Te detectors are common. Furthermore, for the development of patterned electrode geometries, selection of each electrode surface is crucial for minimizing dark current in the device. This investigation presented here has been carried out with three objectives. Each objective is oriented towards establishing reliable methods for the selection of the anode and cathode surfaces independent of the crystallographic orientation. The objectives of this study are (i) investigate how the asymmetry in I-V characteristics of Cd(Zn)Te devices may be associated with the TeO2 interfacial layer using Rutherford backscattering to study the structure at the Au-Cd(Zn)Te interface, (ii) develop an understanding of how the concentration of the active traps in Cd(Zn)Te varies with the external bias, and (iii) propose non-destructive methods for selection of the anode and cathode which are independent of crystallographic orientation. The spectroscopic methods employed in this investigation include Rutherford backscattering spectroscopy, photo-induced current transient spectroscopy, and surface photo-voltage spectroscopy, as well as gamma ray spectroscopy to demonstrate the influence on detector properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Trisulfonamide Ligands for F-Metal Complexation and Extraction from Alkaline Solutions

Selective actinide (An) complexation and extraction from acidic streams, resulting from fuel processing, has been extensively investigated, whereas caustic-side An extraction from alkaline high-level waste (HLW) streams is much less explored. In Savannah River Site, HLW is treated for Cesium removal by the Caustic-Side Solvent Extraction (CSSX) process, which has been invented in Oak Ridge National Laboratory (ORNL). Sr and An are removed before CSSX via an actinide removal process (ARP), which uses modified monosodium titanate (MMST). Several aspects of CSSX have been improved by the Next- Generation Caustic-Side Solvent Extraction (NG-CSSX) process. In this work, introduction of new organic ligands for combined Cs/An extraction is proposed as a possible modification of NG-CSSX process. Combined Cs and An separation could reduce the amount of MMST needed for the ARP leading to better economics. Trisulfonamides were synthesized as follows: 1,3,5- Tris(bromomethyl)-2,4,6-trialkyl-benzene was reacted with Na{sub 2}SO{sub 3} in boiling H{sub 2}O/alcohol. The 1,3,5-tris(sulfomethyl)- 2,4,6-trialkyl-benzene product was stirred with excess of PCl5 in POCl{sub 3} under N{sub 2}, resulting in 1,3,5- tris(chlorosulfonyl-methyl)-2,4,6-trialkyl-benzene. Reaction with substituted anilines led to formation of tri-sulfonamides. All compounds were characterized by IR and {sup 1}H NMR. The synthesized ligands will be tested for incorporation into an alternative solvent extraction technology for combined extraction of Cs, Sr, and An from alkaline HLW streams. Selectivity of tri-sulfonamides towards selected fission products and actinides in liquid-liquid extraction experiments will be studied by tracer techniques at ORNL. Instrumental methods that will be used for characterization include NMR, UV-Vis, and FT-IR spectroscopic methods, mass spectrometry, and X-ray crystallography. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Tuning Nb–Pt Interactions To Facilitate Fuel Cell Electrocatalysis

High stability, availability of multiple oxidation states, and accessibility within a wide electrochemical window are the prime features of Nb that make it a favorable candidate for electrocatalysis, especially when it is combined with Pt. However, Nb has been used as a support in the form of oxides in all previously reported Pt–Nb electrocatalysts, and no Pt–Nb alloying phase has been demonstrated hitherto. Herein, we report a multifunctional Pt–Nb composite (PtNb/NbOx-C) where Nb exists both as an alloying component with Pt and as an oxide support and is synthesized by means of a simple wet chemical method. In this work, the Pt–Nb alloy phase has been firmly verified with the help of multiple spectroscopic methods. This allows for the experimental evidence of the theoretical prediction that Pt–Nb alloy interactions improve the oxygen reduction reaction (ORR) activity of Pt. In addition, such a combination of multiphase Nb brings up myriad features encompassing increased ORR durability, immunity to phosphate anion poisoning, enhanced hydrogen oxidation reaction (HOR) activity, and oxidative carbon monoxide (CO) stripping, making this electrocatalyst useful in multiple fuel cell systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗