Search NASA⌕ Search

SEARCH · Search NASA

Results for “spin LED”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Reimagining the $e_g$ 1 Electronic State in Oxygen Evolution Catalysis: Oxidation-State-Modulated Superlattices as a New Type of Heterostructure for Maximizing Catalysis

We report that the discovery of solid-phase, inexpensive transition-metal-based water oxidation catalysts is a central goal for renewable energy, and has led to a general consensus that a partially populated metal e g d-electronic state is desirable, leading to favorable catalysis for certain elements in specific oxidation states. In manganese systems, the key species is manganese(III), whose high-spin d 4 electronic configuration places an unpaired electron in the e g orbital, which is postulated to contribute to electronic and structural features that support catalysis. Based on density functional theory calculations, it is predicted that electron transfer would be facilitated by a catalyst with alternating low- and high-Mn III -content sheets, which positions neighboring band edges in closer energetic proximity. The preparation of such catalysts is demonstrated for the first time and it is shown that the catalytic activity is maximized in these systems over more uniform, but more Mn III -rich systems. The best catalyst possesses alternating high-and low-average oxidation state sheets with interlayer Cs + ions, and has an overpotential of 450 mV at 10 mA, which represents an improvement of 250 mV over the best unmodified synthetic potassium birnessites. Using scanning tunneling spectroscopy, bandgap modulations consistent with the theoretically predicted band edge shifts are detected.

36 MATERIALS SCIENCE↗
DOE OSTI2024

“Hybridizing heat-integrated 3D printed modules with mass manufacturable, low pressure drop fiber sorbents” (Final Report)

The overall objective of this proposal was to research, develop, and evaluate a modular direct air capture (DAC) system that is simple and scalable. This system was based on the adsorption of CO 2 into commercial polyamines supported by porous fiber sorbents, which can be produced at kilometer per hour scales using our pre-pilot spinning line. We have housed these fiber materials in novel 3D printed modular housing systems that provide easy-to-manufacture and localized heat integration and flow control. This hybridization of fiber sorbent technology with modular housing provided several advantages that led to lower air pressure drops, higher sorbent productivity, as well as ease of manufacturing and assembly unrivaled by existing and emerging heat integrated contactor designs. The modular housing was fabricated with the following features, at a minimum: (i) a tapered air intake to reduce pressure drop related to entrance effects, (ii) a structured network of heat transfer channels to enable localized cooling and heating during adsorption and desorption, respectively, and (iii) low pressure drop supports for the fiber sorbents. This hybrid manufacturing approach provides a facile method for taking fiber sorbents from lab scale to pilot scale as it dramatically simplifies the fabrication of heat integrated contactor structures.

42 ENGINEERING↗
NASA NTRS2017

Unlocking the Commercial Value of NASA Technology Investments

Success in executing NASA's ambitious aerospace missions requires solutions to difficult technical challenges that build on proven capabilities, as well as development of new capabilities. Early and continuous investments in aeronautics over 76 years in Cleveland at NASA Glenn have led to Ohio being the number one supplier to both Boeing and Airbus. New technologies that NASA Glenn is working on, the Center's efforts to engage US industry in the global space exploration efforts, and ways GRC is leading spin-offs of NASA IP are enabling new industries from clean water technologies to biomedical applications.

Innovation↗
DOE OSTI2020

A far‐red‐emitting (Gd,Y) 3 (Ga,Al) 5 O 12 :Mn 2+ ceramic phosphor with enhanced thermal stability for plant cultivation

Abstract As for plants, far‐red (FR) light with wavelength from 700 nm to 740 nm is critical for processes of photosynthesis and photomorphogenesis. Light‐controlled development depends on light to control cell differentiation, structural and functional changes, and finally converge into the formation of tissues and organs. Phosphor converted FR emission under LED excitation is a cost‐effective and high‐efficient way to provide artificial FR light source. With the aim to develop an efficient FR phosphor that can promote the plant growth, a series of gadolinium yttrium gallium garnet (GYGAG) transparent ceramic phosphors co‐doped with Mn 2+ and Si 4+ have been fabricated via chemical co‐precipitation method, followed sintered in O 2 and hot isostatic pressing in this work. Under UV excitation, the phosphor exhibited two bright and broadband red emission spectra due to Mn 2+ : 4 T 1 → 6 A 1 spin‐forbidden transition, and one of which located in the right FR region. And then, Ce 3+ ions were co‐doped as the activator to enhance the absorption at blue light region and the emission of Mn 2+ . It turns out that the emission band of GYGAG transparent ceramic phosphors matches well with the absorption band of phytochrome P FR , which means they are promising to be applied in plant cultivation light‐emitting diodes (LEDs) for modulating plant growth. Besides, the thermal stability of this material was investigated systematically, and an energy transferring model involves defects was also proposed to explain the phenomenon of abnormal temperature quenching.

Qiu, Xuting↗
DOE OSTI2024

Multinuclear PFGSTE NMR description of 39 K, 23 Na, 7 Li, and 1 H specific activation energies governing diffusion in alkali nitrite solutions

While pulsed field gradient stimulated echo nuclear magnetic resonance (PFGSTE NMR) spectroscopy has found widespread use in the quantification of self-diffusivity for many NMR-active nuclei, extending this technique to uncommon nuclei with unfavorable NMR properties remains an active area of research. Potassium-39 ( 39 K) is an archetypical NMR nucleus exhibiting an unfavorable gyromagnetic ratio combined with a very low Larmor frequency. Despite these unfavorable properties, this work demonstrates that 39 K PFGSTE NMR experiments are possible in aqueous solutions of concentrated potassium nitrite. Further, analysis of the results indicates that 39 K NMR diffusometry is feasible when the nuclei exhibit spin–lattice and spin–spin relaxation coefficients on the order of 60–100 ms and 50–100 ms, respectively. The diffusivity of 39 K followed Arrhenius behavior, and comparative 23 Na, 7 Li, and 1 H PFGSTE NMR studies of equimolal sodium nitrite and lithium nitrite solutions led to correlations between the enthalpy of hydration with the activation energy governing self-diffusion of the cations and also of water. Realizing the feasibility of 39 K PFGSTE NMR spectroscopy has a widespread impact across energy sciences because potassium is a common alkali element in energy storage materials and other applications.

74 ATOMIC AND MOLECULAR PHYSICS↗
NASA NTRS1979

Technique to determine location of radio sources from measurements taken on spinning spacecraft

The procedure developed to extract average source direction and average source size from spin-modulated radio astronomy data measured on the IMP-6 spacecraft is described. Because all measurements are used, rather than just finding maxima or minima in the data, the method is very sensitive, even in the presence of large amounts of noise. The technique is applicable to all experiments with directivity characteristics. It is suitable for onboard processing on satellites to reduce the data flow to Earth. The application to spin-modulated nonpolarized radio astronomy data is made and includes the effects of noise, background, and second source interference. The analysis was tested with computer simulated data and the results agree with analytic predictions. Applications of this method with IMP-6 radio data have led to: (1) determination of source positions of traveling solar radio bursts at large distances from the Sun; (2) mapping of magnetospheric radio emissions by radio triangulation; and (3) detection of low frequency radio emissions from Jupiter and Saturn.

Fainberg, J.↗
DOE OSTI2026

Half-ice, half-fire-driven ultranarrow phase crossover in one-dimensional decorated 𝑞-state Potts ferrimagnets: An AI-co-led exploration

OpenAI’s reasoning model o3-mini-high was used to carry out an exact analytic study of one-dimensional ferrimagnetic site- and bond-decorated 𝑞-state Potts models. We demonstrate that the finite-temperature ultranarrow phase crossover (UNPC), driven by a hidden “half-ice, half-fire” state recently discovered in the 𝑞=2 case (Ising model), persists for 𝑞>2. Moreover, we identify unique features for 𝑞>2, including the dome structure in the field-temperature phase diagram, and for large 𝑞 a secondary high-temperature UNPC to the fully disordered paramagnetic state. As the UNPC quickly approaches a genuine transition by enhancing 𝐽, the interaction between the backbone spins, two distinct behaviors emerge: In the site-decorated Potts model, 𝑇 0 is independent of 𝐽 and thus remains unchanged (Type-I UNPC), and in the bond-decorated Potts model with 𝑞>2, 𝑇 0 depends on 𝐽 and quickly shifts toward a finite temperature as 𝐽 increases (Type-II UNPC). These results establish a versatile framework for engineering controlled fast state-flipping switches in low-dimensional systems. Our nine-dan artificial intelligence (AI)-contribution framework assigns AI the meritorious status of AI-co-led discovery in this work.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1982

Planar ion trap (retarding potential analyzer) experiment for atmosphere explorer

The retarding potential analyzer and drift meter were carried aboard all three Atmosphere Explorer spacecraft. These instruments measure the total thermal ion concentration and temperature, the bulk thermal ion velocity vector and some limited properties of the relative abundance of H(+), He(+), O(+) and molecular ions. These instruments functioned with no internal failures on all the spacecraft. On AE-E there existed some evidence for external surface contamination that damaged the integrity of the RPA sweep grids. This led to some difficulties in data reduction and interpretation that did not prove to be a disastrous problem. The AE-D spacecraft functioned for only a few months before it re-entered. During this time the satellite suffered from a nutation about the spin axis of about + or - 2 deg. This 2 deg modulation was superimposed upon the ion drift meter horizontal ion arrival angle output requiring the employment of filtering techniques to retrieve the real data.

Hanson, W. B.↗
DOE OSTI2021

Atomic-scale visualization of topological spin textures in the chiral magnet MnGe

Peeking into magnetic textures Topological spin textures hold promise as robust carriers of information and have been observed in bulk materials with a specific crystal structure. One of these materials, manganese germanide (MnGe), exhibits unusual textures in bulk form. Repicky et al . used spin-polarized scanning tunneling microscopy to study surface magnetism in thin films of MnGe. Achieving high spatial resolution, the researchers observed stripe-like features consistent with a helical state. In regions where the film was slightly curved due to strain, the intersection of domain walls led to characteristic closed patterns that could be manipulated with current/voltage pulses. —JS

Science & Technology - Other Topics↗
NASA NTRS2012

A Computational Investigation of Gear Windage

A CFD method has been developed for application to gear windage aerodynamics. The goals of this research are to develop and validate numerical and modeling approaches for these systems, to develop physical understanding of the aerodynamics of gear windage loss, including the physics of loss mitigation strategies, and to propose and evaluate new approaches for minimizing loss. Absolute and relative frame CFD simulation, overset gridding, multiphase flow analysis, and sub-layer resolved turbulence modeling were brought to bear in achieving these goals. Several spur gear geometries were studied for which experimental data are available. Various shrouding configurations and free-spinning (no shroud) cases were studied. Comparisons are made with experimental data from the open literature, and data recently obtained in the NASA Glenn Research Center Gear Windage Test Facility. The results show good agreement with experiment. Interrogation of the validative and exploratory CFD results have led, for the first time, to a detailed understanding of the physical mechanisms of gear windage loss, and have led to newly proposed mitigation strategies whose effectiveness is computationally explored.

Hill, Matthew J.↗
DOE OSTI2021

Chitin extracted from various biomass sources: It's not the same

Here this study demonstrates the use of ionic liquids to successfully extract chitin from different biomass sources and the utilization of the resulting chitins to prepare monofilament fibers. Chitin was extracted from five different biomass sources (processed and raw shrimp shell, crab and lobster shell, and fly larvae) using the ionic liquid (IL) 1-ethyl-3-methylimidazolium acetate ([C 2 mim][OAc]). While processed and raw shrimp shell yielded chitin of high purity in quantitative yield, crab and lobster shell resulted in lower yields of chitin. Fly larva provided chitin severely contaminated with proteins. Each extracted chitin was re-dissolved in the same IL and dry wet jet spun into monofilament fibers to determine any trends in mechanical properties vs. biomass source. The concentration needed to spin fibers was not consistent and had to be adjusted individually for each type of chitin obtained. Chitin from raw shrimp shell produced the strongest fibers, while the chitin from the crab and lobster produced weaker fibers, although, the latter were twice as elastic. The use of fly larvae led to the weakest and least elastic fibers.

60 APPLIED LIFE SCIENCES↗
NASA NTRS2006

Anomalistic Disturbance Torques during the Entry Phase of the Mars Exploration Rover Missions: A Telemetry and Mars-Surface Investigation

Shortly after landing on Mars, post-flight analysis of the "Spirit" entry data suggested that the vehicle experienced large, anomalistic oscillations in angle-of-attack starting at about M=6. Similar analysis for "Opportunity " found even larger oscillations starting immediately after maximum dynamic pressure at M=14. Where angles-of-attack of 1-2 degrees were expected from maximum dynamic pressure to drogue deployment, the reconstructions suggested 4 to 9 degrees. The next Mars lander, 2007 Phoenix project, was concerned enough to recommend further exploration of the anomalies. Detailed analysis of "Opportunity" data found significant anomalies in the hypersonic aerodynamic torques. The analysis showed that these torques were essentially fixed in the spinning vehicle. Nearly a year after landing, the "Oportunity" rover took pictures of its aeroshell on the surface, which showed that portions of the aeroshell thermal blanket assembly still remained. This blanket assembly was supposed to burn off very early in the entry. An analysis of the aeroshell photographs led to an estimate of the aerodynamic torques that the remnants could have produced. A comparison of two estimates of the aerodynamic torque perturbations (one extracted from telemetry data and the other from Mars surface photographs) showed exceptional agreement. Trajectory simulations using a simple data derived torque perturbation model provided rigid body motions similar to that observed during the "Opportunity" entry. Therefore, the case of the anomalistic attitude behavior for the "Opportunity" EDL is now considered closed and a suggestion is put forth that a similar event occurred for the "Spirit" entry as well.

Tolson, Robert H.↗
DOE OSTI2022

t 1 -noise elimination by continuous chemical shift anisotropy refocusing

We report that due to their high gyromagnetic ratio, there is considerable interest in measuring distances and correlations involving protons, but such measurements are compounded by the simultaneous recoupling of chemical shift anisotropy (CSA). This secondary recoupling adds additional modulations to the signal intensities that ultimately lead to t 1 -noise and signal decay. Recently, Venkatesh et al. demonstrated that the addition of CSA refocusing periods during 1 H-X dipolar recoupling led to sequences with far higher stability and performance. Herein, we describe a related effort and develop a symmetry-based recoupling sequence that continually refocuses the 1 H CSA. This sequence shows superior performance to the regular and t1-noise eliminated D-HMQC sequences in the case of spin-1/2 nuclei and comparable performance to the later for half-integer quadrupoles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

A computational approach to complex junctions and interfaces

Molecular- and nano- junctions, surfaces, interfaces, and interfacial processes have been the subjects of this DOE supported program for about 20 years. We have investigated electronic and magnetic structure, spin-dependent charge transport, and emerging phenomena at surfaces and interfaces in a number of physical systems ranging from nano-clusters, to nanowires, to two-dimensional (2D) crystals and their interactions, to bulk matter. Eighty-four refereed papers were published [1-84], with a majority effort from the group led by the PI, and over a hundred presentations were made at international conferences. We use first-principles methods in the framework of density functional theory in conjunction with nano-equilibrium Green function techniques, semi-empirical Boltzmann transport theory, tight-binding models, and the Hubbard model and many-body wavefunction approaches. In pursuing our scientific goals, we have also developed a number of computational algorithms and computational packages.

2D materials↗
DOE OSTI2023

Exploiting the fraternal twin nature of thermoelectrics and topological insulators in Zintl phases as a tool for engineering new efficient thermoelectric generators

This review article presents a radical overview of the rich chemistry and physics of Zintl phases as it relates to their interesting structure–property relationships. In particular, it unveils the evolution of topological insulator (TI) and thermoelectric (TE) properties in Zintl materials as having a common origin and as such are driven by the same materials properties ranging from a narrow band gap to a strong spin-orbit coupling effect. To this end, excellent TE properties are ubiquitous in many TIs and because of the ever-increasing interest in the studies of topological properties of matter, several robust theoretical frameworks now exist to provide us with additional intuitive nature and understanding of this exotic phase of matter. Here, this invariably has also led to the screening of tens of thousands of materials for the presence of nontrivial topology using the combined predictive power of machine learning and ab-initio first-principles calculations. On the other hand, studies on TE materials are still largely based on some sort of hit-and-miss approach. Here we leveraged on the similar materials features and intersection between TE and TIs and review several Zintl materials that are already identified as TIs and present how exploiting their bulk and surface states properties can be harnessed for developing highly efficient TE materials for practical purposes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2007

Results from Binary Black Hole Simulations in Astrophysics Applications

Present and planned gravitational wave observatories are opening a new astronomical window to the sky. A key source of gravitational waves is the merger of two black holes. The Laser Interferometer Space Antenna (LISA), in particular, is expected to observe these events with signal-to-noise ratio's in the thousands. To fully reap the scientific benefits of these observations requires a detailed understanding, based on numerical simulations, of the predictions of General Relativity for the waveform signals. New techniques for simulating binary black hole mergers, introduced two years ago, have led to dramatic advances in applied numerical simulation work. Over the last two years, numerical relativity researchers have made tremendous strides in understanding the late stages of binary black hole mergers. Simulations have been applied to test much of the basic physics of binary black hole interactions, showing robust results for merger waveform predictions, and illuminating such phenomena as spin-precession. Calculations have shown that merging systems can be kicked at up to 2500 km/s by the thrust from asymmetric emission. Recently, long lasting simulations of ten or more orbits allow tests of post-Newtonian (PN) approximation results for radiation from the last orbits of the binary's inspiral. Already, analytic waveform models based PN techniques with incorporated information from numerical simulations may be adequate for observations with current ground based observatories. As new advances in simulations continue to rapidly improve our theoretical understanding of the systems, it seems certain that high-precision predictions will be available in time for LISA and other advanced ground-based instruments. Future gravitational wave observatories are expected to make precision.

Baker, John G.↗
DOE OSTI2023

Water additives improve the efficiency of violet perovskite light-emitting diodes

High external quantum efficiencies (EQEs) have been achieved for blue, green, red, and near-infrared perovskite light-emitting diodes (PeLEDs), and their energy efficiencies are approaching the efficiencies of III-V-based LEDs. Beyond the visible regime, ultraviolet light offers great promise for many applications such as disinfection. However, PeLEDs demonstrate poor performance in the violet/ultraviolet region, with reports of violet PeLED performance hindered by poor thin-film quality. In this work, we improve the uniformity of perovskite films by adding water into the precursor solution to engineer the crystallization process of spin-coated 2D perovskites. The resulting improved film uniformity, coupled with the reduction in nanoplate size, reduces leakage current and promotes faster recombination rates. The fabricated PeLEDs deliver bright violet emission at 408 nm with a maximum external quantum efficiency of 0.41%, a 5-fold increase over control devices. Furthermore, this work demonstrates viable steps toward cost-effective, efficient ultraviolet PeLEDs.

36 MATERIALS SCIENCE↗