Search NASA⌕ Search

SEARCH · Search NASA

Results for “stable radicals”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Controllable depolymerization of lignin using carbocatalyst graphene oxide under mild conditions

Many efforts have been devoted to depolymerizing lignin to high-value aromatic monomers. However, a controllable and complete lignin inter-unit bond cleavage remains difficult because of the randomness in lignin structure and low selectivity in catalysis. Herein, we demonstrate that a sole carbocatalyst graphene oxide (GO) can selectively oxidize aryl- and alkyl-hydroxyl groups of lignin without the presence of any additional oxidizers, leading to lignin degradation under mild conditions. The results from lignin dimers, lignin oligomers, and organosolv lignin indicate that the depolymerization is catalyzed via an oxidative mechanism through an enol ether intermediate, a stable intermediate that has been chemically isolated here. Quantum chemistry calculations at the density functional theory level indicate that the phenolic –OH group in lignin facilitates the formation of radical cations and thus prohibits ring opening reactions, leading to the complete conversion of lignin dimers to guaiacol through the enol ether intermediate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Uranium-Mediated Peroxide Activation and a Precursor toward an Elusive Uranium cis -Dioxo Fleeting Intermediate

The activation of chalcogen–chalcogen bonds using organometallic uranium complexes has been well documented for S–S, Se–Se, and Te–Te bonds. In stark contrast, reports concerning the ability of a uranium complex to activate the O–O bond of an organic peroxide are exceedingly rare. Herein, we describe the peroxide O–O bond cleavage of 9,10-diphenylanthracene-9,10-endoperoxide in nonaqueous media, mediated by a uranium(III) precursor [(( Me,Ad ArO) 3 N)U III (dme)] to generate a stable uranium(V) bis-alkoxide complex, namely, [(( Me,Ad ArO) 3 N)U V (DPAP)]. This reaction proceeds via an isolable, alkoxide-bridged diuranium(IV/IV) species, implying that the oxidative addition occurs in two sequential, single-electron oxidations of the metal center, including rebound of a terminal oxygen radical. Furthermore, this uranium(V) bis-alkoxide can then be reduced with KC 8 to form a uranium(IV) complex, which upon exposure to UV light, in solution, releases 9,10-diphenylanthracene to generate a cyclic uranyl trimer through formal two-electron photooxidation. Analysis of the mechanism of this photochemical oxidation via density functional theory (DFT) calculations indicates that the formation of this uranyl trimer occurs through a fleeting uranium cis-dioxo intermediate. At room temperature, this cis-configured dioxo species rapidly isomerizes to a more stable trans configuration through the release of one of the alkoxide ligands from the complex, which then goes on to form the isolated uranyl trimer complex.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Visible-Light Photoinitiation of (Meth)acrylate Polymerization with Autonomous Post-Conversion

Conversion plateaus rapidly in radical photopolymerizations (RPPs) following discontinuation of irradiation due to rapid termination of reactive radicals, which restricts the wider use of RPPs in applications that involve nonuniform light access including those with attenuated light transmission or irregular surfaces. Based on our recent report of a radical dark-curing photoinitiator (DCPI) that continues polymerization beyond the cessation of irradiation by enabling latent redox initiation with photo-released amine in the presence of a suitable oxidant, we developed a new DCPI with an absorption spectrum that extends well into the visible range. Our design process involved a series of computational investigations of candidate molecules, including a systematic study of substituents and their position-dependent effects on absorption characteristics, electronic transitions, and the photochemical mechanism and its associated energetics. Our quantum chemical computations identified the target compound 5,7-dimethoxy-6-bromo-3-aroylcoumarin-DMPT/BPh4 and predicted that it would facilitate the dark-curing mechanism by concurrent photo-radical generation and photo-induced release of an efficient redox reductant under visible irradiation. This reductant-tethered chromophore was then synthesized and optically characterized with UV–vis spectroscopy that revealed its strong visible-light absorption with a molar absorptivity of 5710 M–1 cm–1 at 405 nm and 50 M–1 cm–1 at 455 nm. We then demonstrated extensive dark-curing of >35% additional conversion over 25 min following brief activation of the shelf-stable one-part system by irradiation with a 455 nm LED that was ceased at 20% conversion. In contrast, shuttering irradiation of the control formulation at that same point resulted in immediate cessation of conversion, which plateaued at 20%. We determined a remarkable initiator efficiency of 2.82 that results from the additional redox-generated radicals with a 77% photo-reductant generation quantum yield. The combination of superior photo- and dark-curing efficiencies of this new visible DCPI is expected to open new application opportunities in RPP, especially those involving resins that are highly light attenuating, surfaces that possess irregular features that produce uneven irradiance, and production lines where continued dark-curing downstream of the light activation step enhances line efficiencies.

absorption spectrum↗

Single-Electron Transfer Stabilizes Metastable Alane in a Bipyridine-Functionalized MOF Nanopore

Nanoconfinement of metastable hydrides such as alane (AlH 3 ) in functionalized porous frameworks represents a promising yet largely untapped strategy for high-capacity energy storage. Despite its potential, the underlying mechanisms responsible for the thermodynamic stabilization of metastable hydrides are poorly understood. Here, in this study, concepts from solution Lewis acid–base chemistry were applied to a crystalline metal–organic framework (MOF) to stabilize AlH 3 . The long-range order and synthetically versatile pore chemistry enabled us to reveal the intimate details of the hydride-host interactions. Powder X-ray diffraction (PXRD) of AlH 3 -infiltrated UiO-67bpy (Zr 6 O 4 (OH) 4 (bpydc) 6 ; bpydc 2– = 2,2′-bipyridine-5,5′-dicarboxylate) confirms that the framework maintains its crystallinity up to 250 °C and is stable under 70 MPa H 2 pressure. We find that thermodynamic stabilization arises from coupled single-electron and hydrogen-atom transfer from AlH 3 to bipyridine-containing linkers. Electron paramagnetic resonance detects a bipyridyl radical with an anisotropic g-tensor (g values of 2.00132, 2.00215, and 2.00275), consistent with Bader charge analysis predicting 0.82 e – transferred from the hydride to the MOF. These findings establish critical structure–property relationships underpinning AlH 3 stabilization and suggest general strategies for tuning the thermodynamics and kinetics of metastable materials.

Shivanna, Mohana [Sandia National Laboratories (SN↗

A Combined Crossed Molecular Beam and Theoretical Investigation of the Elementary Reaction of Tricarbon (C 3 (X 1 Σ g + )) with Diacetylene (C 4 H 2 (X 1 Σ g + )): Gas Phase Formation of the Heptatriynylidyne Radical ( l -C 7 H(X 2 Π))

An elucidation of the underlying formation pathways to acyclic hydrocarbons such as polyynes (C n H 2 ), cumulenes (C n H 2 ), and linear resonantly stabilized linear radicals (l-C n H) is indispensable to understand the hydrocarbon chemistry in extreme low and high temperature environments. In this study, we exploited the crossed molecular beam technique to investigate the reaction of tricarbon C 3 (X 1 Σ g + ) with diacetylene (butadiyne; HCCCCH; X 1 Σ g + ) at a collision energy of 47 ± 1 kJ mol ⁻1 . The experimental data were merged with ab initio calculations of the singlet C 7 H 2 potential energy surface (PES) revealing that the reaction is initiated via the formation of an initial van der Waals reactant complex in the entrance channel. Subsequent rearrangements lead to various carbene-type and cyclic intermediates via ring-opening, ring-closure, and hydrogen migration processes eventually forming acyclic C 7 H 2 isomers prior to their barrierless unimolecular decomposition to the most stable linear isomer, heptatriynylidyne (C 7 H, X 2 Π) in an overall endoergic reaction (+57 kJ mol ⁻1 ). The reaction exhibits strong similarities to the tricarbon – acetylene (C 3 – C 2 H 2 ). Furthermore, the significant energy threshold suggests that the tricarbon reaction with (poly)acetylenes forming resonantly stabilized linear radicals are open in high-temperature environments such as combustion flames and circumstellar envelopes of carbon stars and planetary nebulae as their descendants; however, these reactions are closed in low-temperature environments as in cold molecular clouds and hydrocarbon-rich atmospheres of planets and their moons such as in Titan.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Green synthesis of sulfur‐doped g‐C 3 N 4 nanosheets for enhanced removal of oxytetracycline under visible‐light irradiation and reduction of its N ‐nitrosodimethylamine formation potential

Abstract BACKGROUND In this study, sulfur‐doped g‐C 3 N 4 (SCN) nanosheets were synthesized using thiourea as a precursor, and then used to catalyze the degradation of oxytetracycline (OTC) under visible‐light irradiation. OTC was chosen as target contaminant because of it being an important precursor of N ‐nitrosodimethylamine (NDMA). RESULTS The removal of OTC was influenced by its initial concentration, initial pH, SCN dosage and water matrices. OTC (≤10 mg L −1 ) was almost completely removed in 40 min under the conditions of an initial pH of 7.0 and a SCN dose of 1.0 g L −1 , and its degradation was well described by the pseudo‐first‐order kinetics model. Water matrices would also influence the degradation of OTC in the system. Electron paramagnetic resonance analysis and trapping experiments confirmed that the function of the radicals for OTC removal followed the order of • O 2 − > • OH > h + . Eight transformation products were determined during the degradation of OTC, it being removed through four pathways: methyl oxidization, demethylation, decarbonylation and secondary alcohol oxidation. SCN was stable in the system, as the removal efficiency of OTC was not significantly reduced even after three recycles. In addition, 55.5% of NDMA formation potential of OTC was reduced after SCN catalytic oxidation. CONCLUSIONS The results imply that the visible‐light‐driven SCN catalytic oxidation is an effective technology not only for the removal of OTC but also for the reduction of NDMA formation potential. © 2021 Society of Chemical Industry

Dou, Yicheng↗

Gas–Phase Preparation of the 14π Hückel Polycyclic Aromatic Anthracene and Phenanthrene Isomers (C 14 H 10 ) via the Propargyl Addition–BenzAnnulation (PABA) Mechanism

Polycyclic aromatic hydrocarbons (PAHs) imply the missing link between resonantly stabilized free radicals and carbonaceous nanoparticles, commonly referred to as soot particles in combustion systems and interstellar grains in deep space. Whereas gas phase formation pathways to the simplest PAH – naphthalene (C 10 H 8 ) – are beginning to emerge, reaction pathways leading to the synthesis of the 14π Hückel aromatic PAHs anthracene and phenanthrene (C 14 H 10 ) are still incomplete. Here, by utilizing a chemical microreactor in conjunction with vacuum ultraviolet (VUV) photoionization (PI) of the products followed by detection of the ions in a reflectron time-of-flight mass spectrometer (ReTOF-MS), the reaction between the 1'- and 2'-methylnaphthyl radicals (C 11 H 9 •) with the propargyl radical (C 3 H 3 •) accesses anthracene (C 14 H 10 ) and phenanthrene (C 14 H 10 ) via the Propargyl Addition–BenzAnnulation (PABA) mechanism in conjunction with a hydrogen assisted isomerization. Furthermore, the preferential formation of the thermodynamically less stable anthracene isomer compared to phenanthrene suggests a kinetic, rather than a thermodynamics control of the reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thin-film composite membranes based on hyperbranched poly(ethylene oxide) for CO 2 /N 2 separation

Cross-linked amorphous poly(ethylene oxide) (XLPEO) is one of the leading membrane materials for post-combustion CO 2 capture. For example, XLPEO prepared from poly(ethylene glycol) methyl ether acrylate (PEGMEA) exhibited CO 2 permeability of 570 Barrer and CO 2 /N 2 selectivity of 41 at 35 °C. However, these XLPEOs cannot be dissolved in coating solutions, making it impossible to be fabricated into thin-film composite (TFC) membranes using state-of-the-art manufacturing processes. In this study, we synthesized high molecular weight yet soluble HPEO via atom transfer radical polymerization (ATRP). These polymers were thoroughly characterized and compared with XLPEO, including thermal transitions, free volumes, and pure-gas sorption and permeation properties. A polymer with the best combination of CO 2 permeability (540 Barrer) and CO 2 /N 2 selectivity (43) was fabricated into defect-free TFC membranes with a thickness as thin as 506 ± 44 nm. When challenged with simulated flue gas containing water vapor at 35 °C for over 100 h, the membrane shows stable CO 2 permeance of 850 GPU and CO 2 /N 2 selectivity of 37, comparable to the leading commercial membranes for carbon capture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanistic Pathways for N 2 O Elimination from trans -R 3 Sn-O-N=N-O-SnR 3 and for Reversible Binding of CO 2 to R 3 Sn-O-SnR 3 (R = Ph, Cy)

The rate and mechanism of the elimination of N 2 O from trans-R 3 Sn-O-N=N-O-SnR 3 (R = Ph ( 1 Ph ) and R = Cy ( 1 Cy )) to form R 3 Sn-O-SnR 3 (R = Ph ( 2 Ph ) and R = Cy ( 2 Cy )) have been studied using both NMR and IR techniques to monitor the reactions in the temperature range of 39–79 °C in C 6 D 6 . Activation parameters for this reaction are ΔH ‡ = 15.8 ± 2.0 kcal·mol –1 and ΔS ‡ = –28.5 ± 5 cal·mol –1 ·K –1 for 1 Ph and ΔH ‡ = 22.7 ± 2.5 kcal·mol –1 and ΔS ‡ = –12.4 ± 6 cal·mol –1 ·K –1 for 1 Cy . Addition of O 2 , CO 2 , N 2 O, or PPh 3 to sealed tube NMR experiments did not alter in a detectable way the rate or product distribution of the reactions. Computational DFT studies of elimination of hyponitrite from trans-Me 3 Sn-O-N=N-O-SnMe 3 ( 1 Me ) yield a mechanism involving initial migration of the R 3 Sn group from O to N passing through a marginally stable intermediate product and subsequent N 2 O elimination. Reactions of 1 Ph with protic acids HX are rapid and lead to formation of R 3 SnX and trans-H 2 N 2 O 2 . Reaction of 1 Ph with the metal radical •Cr(CO) 3 C 5 Me 5 at low concentrations results in rapid evolution of N 2 O. At higher •Cr(CO) 3 C 5 Me 5 concentrations, evolution of CO 2 rather than N 2 O is observed. Addition of 1 atm or less CO 2 to benzene or toluene solutions of 2 Ph and 2 Cy resulted in very rapid reaction to form the corresponding carbonates R 3 Sn-O-C(=O)-O-SnR 3 (R = Ph ( 3 Ph ) and R = Cy ( 3 Cy )) at room temperature. Evacuation results in fast loss of bound CO 2 and regeneration of 2 Ph and 2 Cy . Variable temperature data for formation of 3 Cy yield ΔH o = –8.7 ± 0.6 kcal·mol –1 , ΔS o = –17.1 ± 2.0 cal·mol –1 ·K –1 , and ΔG o 298K = –3.6 ± 1.2 kcal·mol –1 . Furthermore, DFT studies were performed and provide additional insight into the energetics and mechanisms for the reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Silylsilane‐Substituted Polymers: Fluorine‐Free, Liquid Repellent, and Hydrolytically Stable Alternatives to Siloxanes

Abstract Per‐ and polyfluoroalkyl substances (PFAS) are omniphobic and exceptionally stable, making them ideal for a wide range of materials applications. However, as “forever chemicals”, their exceptional persistence and bioaccumulation have generated an increasing amount of environmental and health concerns, prompting the search for fluorine‐free alternatives. Siloxane‐based materials are therefore interesting to examine as PFAS alternatives due to their low surface energy and hydrophobicity but suffer from hydrolytic instability of Si─O linkages. To address this challenge, a novel methacrylate monomer, 3‐[tris(trimethylsilyl)silyl]propyl methacrylate (M‐silyl), is designed containing Si─Si bonds rather than Si─O bonds of siloxanes. Polymers derived from M‐silyl (P‐silyl) is prepared by controlled free radical polymerization and compared with their siloxane analogues after coating on silicon wafers. Contact angle (CA) measurements confirmed P‐silyl to be hydrophobic (advancing/receding water CA = 109.7°/83.0°), with a low‐hysteresis for oil (lyophobic) (hexadecane CA hysteresis = 2.0°), comparable to its siloxane‐based counterpart. Importantly, P‐silyl maintained these surface properties after exposure to acidic or basic conditions, while siloxane analogues lost hydrophobicity. Consequently, the incorporation of Si ─ Si linkages into the design of the polymer enables chemically stable, fluorine‐free alternatives for water‐repellent and low hysteresis surface coatings and advances the design of fluorine‐free functional materials.

fluorine-free↗

A Nitroxide Containing Organic Molecule in a Deep Eutectic Solvent for Flow Battery Applications

The nitroxide radical redox organic molecule, 2-phenyl-4,4,5,5-tetrame- thylimidazoline-1-oxyl-3-oxide (PTIO), was investigated for the first time in a deep eutectic solvent (DES)-like system consisting of a 1:4 molar ratio of choline chloride and ethylene glycol(Ch1EG4) as a redox flow battery electrolyte. PTIO is a single molecule with three oxidation states, and can provide both positive and negative redox couples for a flow battery. A flow battery using the PTIO/Ch1EG4 electrolyte demonstrated nearly 50% roundtrip efficiency with an approximately 1 V open circuit potential. Inefficiencies were primarily due to membrane resistance which can be significantly lowered with increased temperature. While PTIO appears stable over short periods (hours), the oxidized form is not stable in the DES-like electrolyte over longer times. Molecular modeling was performed to investigate the relative stability of PTIO in DES as compared to the previously studied 4-hydroxy-TEMPO (4HT). It was found that the oxoammonium cation 4HT + exhibits a noticeably larger nucleophilic reactive cloud as compared to PTIO + , indicating a higher reactivity. This method to predict stability of the oxoammonium cation shows promise to inform the design and synthesis of promising redox systems based on nitroxide radicals in DES electrolytes to identify new chemistries for large scale energy storage.

25 ENERGY STORAGE↗

From the laboratory to space: unveiling isomeric diversity of C 5 H 2 in the reaction of tricarbon (C 3 , X 1 Σ g + ) with the vinyl radical (C 2 H 3 , X 2 A′)

By connecting laboratory dynamics with cosmic observables, this work highlights the critical role of reactions between highly reactive species in shaping the molecular inventory of the interstellar medium and opens new windows into the spectroscopically elusive corners of astrochemical complexity. The gas phase formation of distinct C 5 H 2 isomers is explored through the bimolecular reaction of tricarbon (C 3 , X 1 Σ + g ) with the vinyl radical (C 2 H 3 , X 2 A′) at a collision energy of 44 ± 1 kJ mol −1 employing the crossed molecular beam technique augmented by electronic structure and Rice–Ramsperger–Kassel–Marcus (RRKM) calculations. This barrierless and exoergic reaction follows indirect dynamics and is initiated by the addition of tricarbon to the radical center of the vinyl radical forming a Cs symmetric doublet collisional complex (CCCCHCH 2 ). Subsequent low-barrier isomerization steps culminate in the resonantly stabilized 2,4-pentadiynyl-1 radical (CHCCCCH 2 ), which decomposes via atomic hydrogen loss. Statistical calculations identify linear, triplet pentadiynylidene (p2, X 3 Σ − g ) as the dominant product, while singlet carbenes ethynylcyclopropenylidene (p1, X 1 A′), pentatetraenylidene (p3, X 1 A 1 ), and ethynylpropadienylidene (p4, X 1 A′) are formed with lower branching ratios. The least stable isomer, 2-cyclopropen-1-ylidenethenylidene (‘eiffelene’; p5, X 1 A 1 ), remains thermodynamically feasible, but exhibits negligible branching ratios. Two isomers detected in TMC-1 to date (p1 and p3) possess significant dipole moments making them amenable to radio telescopic observations, whereas linear pentadiynylidene (p2; D ∞h ) is only traceable via infrared spectroscopy or through its cyanopentadiynylidene derivative (HCCCCCCN). This study highlights the isomer diversity accessed in the low temperature hydrocarbon chemistry of barrierless and exoergic bimolecular reactions involving two unstable, reactants in cold molecular clouds.

Medvedkov, Iakov A. [University of Hawai'i at Mano↗

Stereospecific Enzymatic Conversion of Boronic Acids to Amines

Boronic acids and esters are highly regarded for their safety, unique reactivity, and versatility in synthesizing a wide range of small molecules, bioconjugates, and materials. They are not exploited in biocatalytic synthesis, however, because enzymes that can make, break, or modify carbon–boron bonds are rare. We wish to combine the advantages of boronic acids and esters for molecular assembly with biocatalysis, which offers the potential for unsurpassed selectivity and efficiency. Here, we introduce an engineered protoglobin nitrene transferase that catalyzes the new-to-nature amination of boronic acids using hydroxylamine. Initially targeting aryl boronic acids, we show that the engineered enzyme can produce a wide array of anilines with high yields and total turnover numbers (up to 99% yield and >4000 TTN), with water and boric acid as the only byproducts. We also demonstrate that the enzyme is effective with bench-stable boronic esters, which hydrolyze in situ to their corresponding boronic acids. Exploring the enzyme’s capacity for enantioselective catalysis, we found that a racemic alkyl boronic ester affords an enantioenriched alkyl amine, a transformation not achieved with chemocatalysts. The formation of an exclusively unrearranged product during the amination of a boronic ester radical clock and the reaction’s stereospecificity support a two-electron process akin to a 1,2-metallate shift mechanism. Here, the developed transformation enables new biocatalytic routes for synthesizing chiral amines.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Flame Flashback Investigations in Hydrogen-Enriched Low Swirl Burner using High-Speed Hydroxyl Planar Laser-Induced Fluorescence

Hydrogen/ Hydrogen-rich flame is a potential strategy to reduce carbon emissions for the development of next-generation lean premixed combustors. However, the higher flashback propensity with hydrogen-enrichment owing to faster chemical kinetics is one of the key challenges in existing natural gas turbine combustors. In this study, the fundamentals of stabilized flame dynamics and flashback events in a premixed low swirl burner (LSB) configuration are visualized experimentally using nanosecond (ns)-based high-speed hydroxyl radical planar laser-induced fluorescence (OH-PLIF). The LSB has an optically accessible pre-mixing tube allowing laser diagnostic investigation of flashback events. The inlet conditions are varied systematically with respect to pre-mixer velocities, flame equivalence ratio (ϕ), and hydrogen content and OH-PLIF characterization is performed in stable flame at 20 kHz repetition rate. An increase in flashback propensity is observed with increasing ϕ, hydrogen content, and decreasing V via detailed investigation of flame lift-off length (L) above the burner rim. Flashback ϕ investigations show an expected linearly increasing trend with decreasing hydrogen content and increasing V for each swirler studied and the results agree well with detailed L investigations in stable flame configuration. The propagating flame anchored likely on the back side of the perforated plate within 30-40 ms of the entrance forming the distorted conical flame front.

Parajuli, Pradeep↗

Preliminary Kinetic Analysis of Non-Equilibrium Plasma- Assisted Methanol Pyrolysis and Oxidation Experiments

Efforts to enhance power generation efficiency and reduce emissions have driven interest in novel combustion techniques, including non-equilibrium plasma (NEP) ignitors. NEP ignitors show promise in improving energy conversion efficiency, fuel reforming, emission control, and lean-flammability limits. However, their adoption is hindered by a limited understanding of the interplay between plasma-enhanced combustion and thermal chemistry, particularly for complex fuels under engine-relevant conditions. Developing experimentally validated kinetic mechanisms is therefore critical. Additionally, the increasing interest in renewable biofuels like ethanol and methanol, coupled with the desirable qualities of NEP ignitors, presents a compelling opportunity for study. Therefore, this work acts as an extension of a previous work (Bopaiah et al., 2023) pertaining to the experimental results of NEP-assisted methanol pyrolysis and oxidation. Experiments were performed with a custom-built plasma flow reactor at 0.5 atm and temperatures from 523-1203 K. All reactive mixtures are extremely diluted to minimize exothermicity due to reactivity, allowing isothermal assumptions and the isolation of plasma chemistry from thermal chemistry. A dielectric barrier discharge plasma, at 14 kV and 15 ns full-width half maximum, was applied to the reactive mixture at varying frequencies to maintain the number of pulses with increasing temperature. Steady-state product speciation was performed downstream of the reactor with ex-situ GC/MS diagnostics. The attained experimental results were examined through in-depth analysis performed by means of an in-development plasma-coupled kinetic mechanism. As discussed in the previous work, the plasma significantly accelerates methanol pyrolysis, increasing stable intermediate production, including oxygenated and nitrile species. Plasma-assisted oxidation shows even faster fuel consumption compared to pyrolysis and a 200 K ignition shift compared to thermal oxidation. For plasma-assisted pyrolysis, the model demonstrates that accelerated fuel consumption stems from dissociative quenching of excited N2 states with fuel and H2, generating H radicals that react to rapidly form CH3 and CH2OH radicals. At low temperatures, these radicals recombine to produce oxygenates, while CH3 drives nitrile and hydrocarbon formation at higher temperatures. While the model captures pyrolysis trends well, discrepancies in methane, ethylene, and ethanol predictions are present. Similarly, the model faces challenges in accurately representing plasma-assisted oxidation, predicting a much steeper fuel gradient and ignition 100 K earlier than the experiment. While a similar scheme to pyrolysis is nested in the reaction pathway, the enhancement of the O and H radical fluxes and their initiation of the OH and HO2 radical pools dominate fuel and intermediate oxidation. The overestimation of these processes is shown to be responsible for the divergence of model from experiment. While the modelling predictions of this preliminary mechanism are not perfect, they serve as a valuable starting point. Primarily, they elicited new reaction pathways that are not otherwise possible in thermal chemistry induced reaction kinetics. The results also provide a basis for the future work that should be performed. For example, theoretical and experimental studies on excited nitrogen species and fuel/fuel radical interactions, quantification of the NOx production, and the kinetics behind the slow ignition observed in oxidation should be emphasized.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Literature Review on Next Generation Solvent Isopar ® L Vapor Pressure Curve and the Partitioning of its Modifier and Extractant

The Next Generation Solvent (NGS) is set to replace the Original Caustic Side Solvent Extractant (CSSX) at the Salt Waste Processing Facility (SWPF). The Savannah River National Laboratory (SRNL) was requested by Savannah River Mission Completion (SRMC), formerly Savannah River Remediation (SRR), to perform a literature review on the following topics to address flammability concerns with the current solvent: Isopar ® L vapor pressure curve for NGS, partitioning ratio for the extractant MaxCalix and the modifier Cs-7SB, and high cesium concentration impacts on NGS radiolysis and potential solvent degradation rates in high cesium concentrations. The following conclusions and recommendations are made based on previous experimental work and literature: (1) Current SWPF flammable gas generation calculations use an Isopar ® L vapor pressure curve based on experimental testing with the Original CSSX solvent. No such testing to date has been performed with NGS. It is suggested that the decrease in Cs-7SB concentration for NGS compared to the Original CSSX solvent would lead to a slightly higher vapor pressure at all temperatures in SWPF vessels. A bounding NGS vapor pressure curve has been provided; it is recommended to see if these values would challenge current flammability controls and to perform testing if needed.(2) The partitioning ratio for Cs-7SB is known in the Original CSSX solvent with dilute nitric acid and caustic solutions. No tests could be found for the partitioning of Cs-7SB to dilute boric acid solutions; however, a similar partitioning ratio is expected. Due to the lipophilic alkyl chains on MaxCalix, it is expected to be even less soluble than BOBCalixC6 in the aqueous phase and should not be considered a significant contributor to the f organic term. Additionally, the reaction rate of N,N’,N’’-Tris(3,7-dimethyloctyl)guanidine (TiDG) or its degradation products with a hydrogen radical should be estimated/determined if they are found to be significant contributors to the f organic term. (3) NGS is expected to see much higher Cs concentrations at SWPF in comparison to its use at the Modular CSSX Unit (MCU). These higher Cs concentrations could influence radiolytic degradation rates of the solvent. NGS appears to be fairly stable to radiolytic degradation based on previous testing and its use at MCU. However, there has not been radiolytic flammable gas generation testing with NGS to date. There is a risk that the continued use of G-values obtained for flammable gases produced from the irradiation of the Original CSSX solvent is not bounding for NGS, but this is considered a very low risk due to the similarities in the composition of the solvents, as well as the conservatisms in the experimental design of the Original CSSX testing.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

High-Throughput Discovery Illuminates Design Principles and Limits for Long-Lived Charged Species in Organic Electrolytes

The chemical stability of charged molecules in all-organic redox flow batteries (RFBs) is required for the prolonged operation of these devices. Molecular engineering and electrolyte optimization are used to mitigate parasitic reactions and extend the lifetimes of the charge carriers. However, how much can structural variation extend the lifetime? To probe this query, we designed a high-throughput kinetic study of the radical cation of N-methylphenothiazinium, guided by statistical sampling and learning algorithms. Using Argonne’s autonomous discovery facility, we conducted over 6,000 kinetic experiments with robotic sample preparation, parallel kinetic measurements, and machine learning inputs, testing 188 solvent molecules selected from a space of over 540 candidates from 11 chemical classes. Algorithmic selections guided us to stable solvent candidates, which were further tested in high concentration with and without supporting electrolyte. Our findings reveal the inherent difficulty of exceeding the current state of the art through solvent variation. The desired stability is statistically rare and poorly predictable. Among the many tested, only three solvents significantly outperformed our baseline, acetonitrile─and none by more than a factor of 3─suggesting a general challenge in achieving the necessary techno-economic targets. Furthermore, we suggest that self-discharge through solvent homolysis is the cause of the observed limitations. Several structural motifs contribute to >1,000 h half-life stability including molecular simplicity, symmetry, oxidation complement, and strategic fluorination. Importantly, this workflow establishes effective assays for diagnosing and predicting oxidative stress for highly stable liquid electrolytes in all batteries.

Batteries↗

Direct methane activation by atomically thin platinum nanolayers on two-dimensional metal carbides

We report efficient and direct conversion of methane to value-added products has been a long-term challenge in shale gas applications. Here, we show that atomically thin nanolayers of Pt with a single or double atomic layer thickness, supported on a two-dimensional molybdenum titanium carbide (MXene), catalyse non-oxidative coupling of methane to ethane/ethylene (C 2 ). Kinetic and theoretical studies, combined with in-situ spectroscopic and microscopic characterizations, demonstrate that Pt nanolayers anchored at the hexagonal close-packed sites of the MXene support can activate the first C–H bond of methane to form methyl radicals that favour desorption over further dehydrogenation and thus suppress coke deposition. At 750 °C and 7% methane conversion, the catalyst runs for 72 hours of continuous operation without deactivation and exhibits >98% selectivity towards C 2 products, with a turnover frequency of 0.2–0.6 s -1 . Our findings provide insights into the design of highly active and stable catalysts for methane activation and create a platform for developing atomically thin supported metal catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗