Search NASA⌕ Search

SEARCH · Search NASA

Results for “stem height”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

Origin of Stability in Sedimentation

Velocity fluctuations and particle concentrations are studied in a liquid fluidized bed to investigate the origin of steady state sedimentation. Both the velocity fluctuations and the particle concentrations are found to strongly depend on height. A flux balance model shows why the bed is stable: velocity fluctuations drive a downward particle flux that is compensated by an upward particle flux stemming from an excess flow velocity due to the stratification in concentration. Our results show that in steady state the magnitudes of the fluctuations are related to the degree of stratification.

Segre, P. N.↗
NASA NTRS2014

An Efficient, Multi-Layered Crown Delineation Algorithm for Mapping Individual Tree Structure Across Multiple Ecosystems

Deriving individual tree information from discrete return, small footprint LiDAR data may improve forest above ground biomass estimates, and provide tree-level information that is important in many ecological studies. Several crown delineation algorithms have been developed to extract individual tree information from LiDAR point clouds or rasterized canopy height models (CHM), but many of these algorithms have difficulty discriminating between overlapping crowns, and also may fail to detect understory trees. Our approach uses a watershed based delineation of a CHM, which is subsequently refined using the LiDAR point cloud. Individual tree detection was validated with stem mapped field data from the Smithsonian Environmental Research Center (SERC), Maryland, and on a plot and stand level through comparisons of stem density and basal area to delineated metrics at both SERC and a study area in the Sierra Nevada, California. For individual tree detection, the algorithm correctly identified 70% of dominant trees, 58% of co-dominant trees, 35% of intermediate trees and 21% of suppressed trees at SERC. The algorithm had difficulty distinguishing between crowns of small, dense understory trees of approximately the same height. Delineated crown volume alone explained 53% and 84% of the variability in basal area at the SERC and Sierra Nevada sites, respectively. The algorithm produced crown area distributions comparable to diameter at breast height (DBH) size class distributions observed in the field in both study sites. The algorithm detected understory crowns better in the conifer-dominated Sierra Nevada site than in the closed-canopy deciduous site in Maryland. The ability for the algorithm to reproduce both accurate tree size distributions and individual crown geometries in two dissimilar and complex forests suggests great promise for applicability to a wide range of forest systems.

LiDAR↗
NASA NTRS2007

Simulation Studies of the Effect of Forest Spatial Structure on InSAR Signature

The height of scattering phase retrieved from InSAR data is considered being correlated with the tree height and the spatial structure of the forest stand. Though some researchers have used simple backscattering models to estimate tree height from the height of scattering center, the effect of forest spatial structure on InSAR data is not well understood yet. A three-dimensional coherent radar backscattering model for forest canopies based on realistic three-dimensional scene was used to investigate the effect in this paper. The realistic spatial structure of forest canopies was established either by field measurements (stem map) or through use of forest growth model. Field measurements or a forest growth model parameterized using local environmental parameters provides information of forest species composition and tree sizes in certain growth phases. A fractal tree model (L-system) was used to simulate individual 3- D tree structure of different ages or heights. Trees were positioned in a stand in certain patterns resulting in a 3-D medium of discrete scatterers. The radar coherent backscatter model took the 3-D forest scene as input and simulates the coherent radar backscattering signature. Interferometric SAR images of 3D scenes were simulated and heights of scattering phase centers were estimated from the simulated InSAR data. The effects of tree height, crown cover, crown depth, and the spatial distribution patterns of trees on the scattering phase center were analyzed. The results will be presented in the paper.

Sun, Guoqing↗
NASA NTRS1972

Simultaneous electric-field measurements on nearby balloons.

Electric-field payloads were flown simultaneously on two balloons from Great Whale River, Canada, on September 21, 1971, to provide data at two points in the upper atmosphere that differed in altitude by more than one atmospheric density scale height and in horizontal position by 30-140 km. The altitude dependences in the two sets of data prove conclusively that the vertical electric field at balloon altitudes stems from fair-weather atmospheric electricity sources and that the horizontal fields are mapped down ionospheric fields, since the weather-associated horizontal fields were smaller than 2 mV/m.

Mozer, F. S.↗
NASA NTRS1986

Characterization of vegetation by microwave and optical remote sensing

Two series of carefully controlled experiments were conducted. First, plots of important crops (corn, soybeans, and sorghum), prairie grasses (big bluestem, switchgrass, tal fescue, orchardgrass, bromegrass), and forage legumes (alfalfa, red clover, and crown vetch) were manipulated to produce wide ranges of phytomass, leaf area index, and canopy architecture. Second, coniferous forest canopies were simulated using small balsam fir trees grown in large pots of soil and arranged systematically on a large (5 m) platform. Rotating the platform produced many new canopies for frequency and spatial averaging of the backscatter signal. In both series of experiments, backscatter of 5.0 GHz (C-Band) was measured as a function of view angle and polarization. Biophysical measurements included leaf area index, fresh and dry phytomass, water content of canopy elements, canopy height, and soil roughness and moisture content. For a subset of the above plots, additional measurements were acquired to exercise microwave backscatter models. These measurements included size and shape of leaves, stems, and fruit and the probability density function of leaf and stem angles. The relationships of the backscattering coefficients and the biophysical properties of the canopies were evaluated using statistical correlations, analysis of variance, and regression analysis. Results from the corn density and balsam fir experiments are discussed and analyses of data from the other experiments are summarized.

Daughtry, C. S. T.↗
NASA NTRS2002

Steady State Sedimentation in a Liquid Fluidized Bed

The velocity fluctuations and the local particle concentration of a particle suspension exhibiting steady state sedimentation in a fluidized bed are determined as a function of height along the particle column. Both the velocity fluctuations and the particle volume fraction are found to strongly depend on height. We account for the stability of the bed by a simple model evoking a flux balance. Velocity fluctuations driving a downward particle flux are compensated by an upward particle flux stemming from an excess flow velocity due to the concentration gradient of the system.

Segre, P. N.↗
DOE OSTI2026

Strain mapping of three-dimensionally structured two-dimensional materials

Strain plays a crucial role in tuning materials’ properties, influencing their optical, electrical, and chemical performances. In two-dimensional (2D) materials, applied stress often induces out-of-plane deformation, resulting in a more intricate three-dimensional (3D) topography, where mapping the strain remains a challenge due to the limitations of conventional characterization techniques. In this work, we introduce BRIGHT (Bragg-Rod Informed, Gradient-based Height-mapping Technique), an integrated method for reconstructing both the topography and planar strain profile of 3D-structured 2D materials using nanobeam four-dimensional scanning transmission electron microscopy (4D-STEM). We apply BRIGHT to a MoS2-MoSe2 transition metal dichalcogenide (TMD) lateral heterojunctions exhibiting built-in strain and out-of-plane ripples and show that varying heterojunction widths lead to distinct surface morphologies and corresponding changes in the planar strain distribution. These results establish a foundation for more effective strain engineering in 2D materials by accounting for out-of-plane structural features, thereby enabling more precise control of strain-dependent properties.

Mireles, Adan [Rice Univ., Houston, TX (United Sta↗
DOE OSTI2021

Arctic tundra shrubification: a review of mechanisms and impacts on ecosystem carbon balance

Abstract Vegetation composition shifts, and in particular, shrub expansion across the Arctic tundra are some of the most important and widely observed responses of high-latitude ecosystems to rapid climate warming. These changes in vegetation potentially alter ecosystem carbon balances by affecting a complex set of soil–plant–atmosphere interactions. In this review, we synthesize the literature on (a) observed shrub expansion, (b) key climatic and environmental controls and mechanisms that affect shrub expansion, (c) impacts of shrub expansion on ecosystem carbon balance, and (d) research gaps and future directions to improve process representations in land models. A broad range of evidence, including in-situ observations, warming experiments, and remotely sensed vegetation indices have shown increases in growth and abundance of woody plants, particularly tall deciduous shrubs, and advancing shrublines across the circumpolar Arctic. This recent shrub expansion is affected by several interacting factors including climate warming, accelerated nutrient cycling, changing disturbance regimes, and local variation in topography and hydrology. Under warmer conditions, tall deciduous shrubs can be more competitive than other plant functional types in tundra ecosystems because of their taller maximum canopy heights and often dense canopy structure. Competitive abilities of tall deciduous shrubs vs herbaceous plants are also controlled by variation in traits that affect carbon and nutrient investments and retention strategies in leaves, stems, and roots. Overall, shrub expansion may affect tundra carbon balances by enhancing ecosystem carbon uptake and altering ecosystem respiration, and through complex feedback mechanisms that affect snowpack dynamics, permafrost degradation, surface energy balance, and litter inputs. Observed and projected tall deciduous shrub expansion and the subsequent effects on surface energy and carbon balances may alter feedbacks to the climate system. Land models, including those integrated in Earth System Models, need to account for differences in plant traits that control competitive interactions to accurately predict decadal- to centennial-scale tundra vegetation and carbon dynamics.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Compilation and utilization of a sorghum transcriptome compendium for gene regulatory network analysis and crop trait engineering

Sorghum bicolor (Sorghum) is a drought and heat tolerant C4 grass crop used to produce grain, forage, biofuels, and other bioproducts. Genetic improvement of sorghum hybrid crops is aided by a large and diverse germplasm, sorghum's diploid inbreeding genetics, and a relatively small genome that has facilitated genomic research. Over the past 20 years, the sorghum research community characterized the cytogenetic and recombinant landscapes of sorghum's 10 chromosomes, sequenced and annotated the sorghum genome, and used that information to identify genes/alleles that modulate flowering time, plant height, seed shattering, and other important traits. More recently, >1000 RNA-seq transcriptome profiles were collected from 15 sorghum genotypes to help understand the genetic basis of variation in growth and development of sorghum stems, tillers, roots, and leaves, and the regulation of biosynthetic pathways that produce epicuticular wax, dhurrin, and RFOs, compounds that contribute to sorghum's resilience. Transcriptome studies were designed to identify differentially expressed genes that are co-expressed during development or in response to a treatment to enable construction of gene regulatory networks. Co-expression and network analysis identified transcription factors and their cognate binding sites in target gene promoters and signaling pathways that modulate gene regulatory networks providing gene editing targets for further trait optimization. RNA-seq data from >20 experiments targeting sorghum organs, tissues, cell types, developmental stages, and responses to environmental conditions (i.e., diel, day-length, shading, water-deficit, temperature) has been compiled in a sorghum transcriptome compendium. The goal of this resource paper is to describe compendium content, accessibility, and a compendium data analysis pipeline and to illustrate the types of information that can be derived from the compendium with a focus on the elucidation of gene regulatory networks useful for guiding the improvement of sorghum traits through gene editing.

RNA-seq↗
DOE OSTI2023

Tree architecture: A strigolactone-deficient mutant reveals a connection between branching order and auxin gradient along the tree stem

Due to their long lifespan, trees and bushes develop higher order of branches in a perennial manner. In contrast to a tall tree, with a clearly defined main stem and branching order, a bush is shorter and has a less apparent main stem and branching pattern. To address the developmental basis of these two forms, we studied several naturally occurring architectural variants in silver birch (Betula pendula). Using a candidate gene approach, we identified a bushy kanttarelli variant with a loss-of-function mutation in the BpMAX1 gene required for strigolactone (SL) biosynthesis. While kanttarelli is shorter than the wild type (WT), it has the same number of primary branches, whereas the number of secondary branches is increased, contributing to its bush-like phenotype. To confirm that the identified mutation was responsible for the phenotype, we phenocopied kanttarelli in transgenic BpMAX1::RNAi birch lines. SL profiling confirmed that both kanttarelli and the transgenic lines produced very limited amounts of SL. Interestingly, the auxin (IAA) distribution along the main stem differed between WT and BpMAX1::RNAi. In the WT, the auxin concentration formed a gradient, being higher in the uppermost internodes and decreasing toward the basal part of the stem, whereas in the transgenic line, this gradient was not observed. Through modeling, we showed that the different IAA distribution patterns may result from the difference in the number of higher-order branches and plant height. Future studies will determine whether the IAA gradient itself regulates aspects of plant architecture.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Overcoming environmental constraints to high-yielding eastern cottonwood productivity in the southeastern United States

The global demand for biomass is rising, and Populus species are among the most productive temperate woody plants. This 6-year study, conducted in Sumter County, South Carolina, USA evaluated the effects of supplemental irrigation and fertilization on crown and leaf traits, dry weight productivity, and clonal variation in Populus deltoides. Eight commercially available clones (‘ST148’, ‘S2C20’, ‘3167’, ‘ST72’, ‘20WV’, ‘S7C1’, ‘ST70’, and ‘S7C15’) were assessed. Drip irrigation was applied to maintain soil tension at either 33 kPa (15% volumetric soil moisture) or 1500 kPa (10%). Nutrient treatments via weekly fertigation applications consisted of two levels: a high annual rate (initially 85 kg elemental nitrogen ha−1 year−1, increasing to 182 kg ha−1 year−1 at Year 3, then reduced to 135 kg ha−1 year−1 thereafter) and a low rate at 50% of the high treatment. Dry weight yields were estimated using standing tree measurements. Results revealed significant clonal differences in leaf area index (LAI) that peaked in Year 3, with the fastest-growing clones exhibiting lower LAI values. At Ages 2 and 3, these clones also showed higher concentrations of K, Ca, B, Cu, and Mn in leaves, along with lower Mg and Zn concentrations. Both annual height and diameter growth varied significantly by treatment and clone, with the largest height increases observed in the low fertilizer treatments from Year 3 onward. Biomass production in all irrigated plots exceeded that of non-irrigated plots across all biomass components at Ages 4, 5, and 6. Furthermore, stem-to-root dry weight ratios increased more rapidly in the best-performing treatment–clone combinations compared to non-irrigated plots. Notably, P. deltoides plots receiving fertilizer had higher soil carbon concentrations (i.e., percent C) compared to adjacent sweetgum, sycamore, and agricultural plots. These findings highlight the potential of targeted irrigation strategies to enhance biomass productivity in P. deltoides plantations.

Tuskan, Gerald [ORNL] (ORCID:0000000301061289)↗
DOE OSTI2026

Comparing Delay-, Distance-, and Cordon-Based Congestion Pricing Strategies Via Large-Scale Simulation

This study compares the impacts of delay-, distance-, and cordon-based congestion pricing strategies for Austin, Texas, using the POLARIS agent-based activity-based travel demand simulation model. This approach enables agent-level heterogeneity and realistic choice options (including destination, mode, and activity scheduling) for dynamic traffic assignment and congestion feedbacks across a major metro region, which are features lacking in past work. To ensure comparability, distance-based tolls were set to generate the same revenue as delay-based tolling of $3.5 M/day, averaging $1.17/resident/day or $0.42/vehicle-trip. Delay-based pricing delivers 44% lower network delay and 13% lower VHT compared to the no-toll baseline, levels unmatched by other pricing strategies. At the height of the AM peak, drivers pay up to $0.13/mile on average, though most links in the network remain untolled. Distance-based pricing is the most effective at reducing VMT (by 4%), but VHT reductions (of 6%) primarily stem from drivers selecting closer destinations, achieving only one-fourth the delay reduction of delay-based pricing. Across various implementations of delay- and distance-based pricing, the results suggest that spatial variations of tolls are far more important than temporal variations. Cordon tolls produce minimal impacts at the network-wide level, but offer substantial delay reductions inside the cordon. Other major findings include: 1) delay-based pricing increases trip-making during the PM peak period due to backward shifts in discretionary-activity start times by higher-income residents; and 2) tolls’ spatial impacts, including changes in network flows and tolls paid by residents, vary substantially between delay- and distance-based pricing strategies.

Agent-based modeling↗
DOE OSTI2026

Typha angustifolia non-destructive biomass data from an upland tidal brackish marsh, PIE LTER, Byfield, MA, (2022-2024)

This dataset contains non-destructive measurements of key features of Typha angustifolia samples. These samples were measured during the growing season in 2022, 2023, and 2024 in an upland brackish tidal wetland along the Parker River, Byfield, Massachusetts (MA), which is within the Plum Island Ecosystems Long Term Ecological Research Station (PIE LTER). Measurements were taken to investigate the difference in above ground biomass between two locations, the marsh interior (MI) and the creek bank (CB) and to support an allometric equation used to predict aboveground Typha angustifolia biomass per square meter. No QA/QC procedures were applied to the data. Metadata files Typha_biomass_observations_dd.csv and Typha_biomass_observations_flmd.csv contain detailed information on variable definitions, sampling methods, and the location of the site.

CULM_D_1↗
DOE OSTI2026

Miscibility and Cocrystallization in Ethylene–Vinyl Alcohol Copolymer Blends

The compatibility among different ethylene−vinyl alcohol (EVOH) copolymer grades plays a crucial role in determining how easily they can be recycled when present together in a mixed waste stream. In this work, melt miscibility and cocrystallization in 50/50 wt/wt binary blends of EVOH copolymers with differing ethylene content were studied. Blends with up to a 21 mol % difference in composition were analyzed. Thin films of miscible blends appeared homogeneous in the melt as observed under an optical microscope, whereas AFM height images showed that immiscible blends underwent surface roughening due to phase separation. For copolymers with modest composition differences, the blend behaved as a single component, showing single, narrow melting and crystallization peaks in DSC thermograms, indicating cocrystallization at the level of crystal stems. Interestingly, even phase-separated blends demonstrated partial cocrystallization due to partial miscibility of the components in the molten phase-separated domains. The extent of cocrystallization is governed by the difference in freezing points of the components; rapid cooling increased cocrystallization in the blends. The maximum compositional difference allowed for miscibility is not constant but depends on the blend’s average comonomer content, in agreement with the “miscibility window” calculated from literature pressure−volume−temperature behavior for the individual EVOH copolymers and regular mixing theory. This study helps illuminate the effect of copolymer composition on miscibility, as well as cocrystallization behavior in blends of random copolymers with cocrystallizable units.

Cocrystallization↗
DOE OSTI2020

Herbicide, fertilization, and planting density effects on intensively managed loblolly pine early stand development

Production forestry in the southeast US has been partially transitioned to intensively managed short rotations (~10 years), in which multiple silvicultural interventions are performed during forest development. Understanding the responses to silvicultural practices and continued refinement of site-specific recommendations is critical to sustainably maximize forest production. We evaluated the effects of silvicultural practices (herbicide, fertilization, and planting density) on growth, stand homogeneity, and above- and belowground biomass accumulation and partitioning of loblolly pine (Pinus taeda) throughout early stand development (age 5 years) in the southeastern US. Five treatments with eight replications each were tested: no herbicide and no fertilization (C); herbicide only (H); herbicide and half-reduced fertilization rate (R); herbicide and full fertilization (F); and increased stand density (60+ %; 1346 vs. 2152 trees per hectare) with herbicide and full fertilization rate (D). Allometric equations generated from destructive harvests were applied to annual diameter measurements to estimate plot-level biomass and allocation. Herbicide was crucial to promote stand uniformity and increase yield (~600+ % stem biomass compared with C at age 5). Aboveground biomass was similar in R and F treatments, which was ~25% higher than in H at age 5. Increasing planting density along with multiple herbicide and fertilizer applications yielded higher biomass without compromising individual tree size (diameter and height). There was little effect of silviculture practices on allocation patterns. Our results parallel what was found for fertilization with herbicide from a number of loblolly stands under similar conditions and indicate a ~28% volume gain with fertilization during early stand development. Similarly, our results were consistent with other studies implementing similar differences in planting density and suggest a ~26% volume gain through early stand development with an initial 60% increase in planting density. Furthermore, our study helps to understand complex relationships between production and silvicultural practices during early stand development and demonstrates that silvicultural prescriptions can be optimized to increase sustainability of production forestry

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS2018

Impacts of Snow Darkening Effects by Light Absorbing Aerosols on Hydroclimate of Eurasia During Boreal Spring and Summer

In this study, we used the NASA GEOS-5 climate model to investigate the impact of snow darkening by light-absorbing aerosols on the hydro-climate if Eurasia during boreal spring and summer. Two sets of 10-member ensemble model integrations with prescribed sea surface temperature were carried out for 10 simulated years (2002-2011); one includes snow-darkening effects (SDE) by light-absorbing aerosols, and one does not (NSDE). Differences between the two experiments in the hydro-climates over Eurasia were evaluated. Results show that SDE warming is most pronounced during the melting season due to strong snow-albedo feedback in the vicinity of the retreating seasonal snowline. SDE spurs a Wet-First-Dry-Later (WFDL) modulation of the surface energy and water balances, characterized by an accelerated (days-to-weeks) snowmelt along with excessive runoff and a warming and wetting of the land during the early part of the melting season. The fast snowmelt is followed by a prolonged (> months) warming and desiccation of the land, stemming from a deficit of late-season snowmelt water and increased surface evaporation. The prolonged warming and drying of the land atmosphere system persist through the summer, sustained by atmospheric conditions favorable for the development of atmospheric blocking, i.e., higher mid-to-upper tropospheric geopotential height, lower relative humidity, reduced cloudiness and enhanced atmospheric subsidence. Overall, SDE by light absorbing aerosols leads to a warmer and drier boreal summer hydro-climate, increasing the frequency of the top 5% and 1% extreme hot days (as defined by NSDE statistics) over western and northern Eurasia by approximately three-fold and tenfold, respectively.

Snow darkening↗
DOE OSTI2020

Fallout Cloud Regimes

The U.S. Department of Defense (DOD), Department of Energy (DOE), and other organizations maintain operational nuclear explosion and atmospheric dispersion models to provide critical guidance on the expected effects of an accidental or deliberate explosion of a nuclear weapon (in this paper simply referred to as “device”). To be effective, these models must represent, as accurately as possible, the complex interactions of the blast, fire, and residual radiological hazards with the environment and population. One hundred atmospheric nuclear tests that form the basis for many models were conducted at the Nevada Test Site (NTS) (now referred to as the Nevada Nuclear Security Site, NNSS) in a dry desert environment. Other environments should be studied, but have less data available and are beyond the scope of the work presented in this paper. The debris clouds produced by the NTS tests, frequently called “mushroom clouds,” are familiar, with common structural elements such as a buoyant cap connected to a skirt of raised dust at the desert surface by a thin, dirt-filled stem. The film scanning project at LLNL has investigated historical film records of nuclear weapons tests. Here, we summarize findings showing that the mushroom cloud behavior for historic U.S. tests conducted in Nevada, has similar characteristics based on the distance of the device from the ground surface or Height of Burst (HOB), scaled by the energy release, or yield, of the device. This scaled height is referred to as the scaled-height-of-burst (SHOB). The findings discussed below show that mushroom clouds look and behave similarly when detonated at the same SHOB. The amount of residual radiation that is produced by a nuclear detonation is proportional to the yield. But, the amount of that residual radiation that actually becomes local fallout is strongly dependent on the SHOB and the type of surface over which the detonation occurs. In order to develop a more comprehensive model that predicts the fraction of the residual radiation that becomes local fallout, it is convenient to define a series of regimes based on SHOB values in which all detonations that occur within a given regime can be modeled using the same algorithms. The purpose of this paper is to provide a framework for defining different regimes, and, in a qualitative way, a basic understanding of the fundamental characteristics of each of these regimes.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
NASA NTRS1980

Plants and weightlessness

The growth of two plants, wall cress and short-day red goosefoot, was traced for their entire lifetime in weightlessness. In the beginning both plants grew normally: the seeds sprouted in the normal periods, and the shoots did not differ in any way from the control plants. It is true that certain roots lost their normal orientation and did not go deeper into the nutrient medium, but rather crept over its surface. But then both the wall cress and the goosefoot slowed down their normal rate of growth, which became noticeable from the rate of formation of new leaves in the wall cress and stem development in the goosefoot. Although no disorders were successfully found in the morphology of the two plants, almost half of the experimental cress and goosefoot plants ceased growth completely, yellowed and died. The other part continued to develop normally and by the end of vegetation, differed from the control plants only in a lower height. Not all were fertile since certain experimental plants, after losing spatial orientation, became twisted and produced sterile flowers.

Karminskiy, V.↗