Search NASA⌕ Search

SEARCH · Search NASA

Results for “structural”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

The 1.3 Å resolution structure of the truncated group Ia type IV pilin from Pseudomonas aeruginosa strain P1

The type IV pilus is a diverse molecular machine capable of conferring a variety of functions and is produced by a wide range of bacterial species. The ability of the pilus to perform host-cell adherence makes it a viable target for the development of vaccines against infection by human pathogens such as Pseudomonas aeruginosa . Here, the 1.3 Å resolution crystal structure of the N-terminally truncated type IV pilin from P. aeruginosa strain P1 (ΔP1) is reported, the first structure of its phylogenetically linked group (group I) to be discussed in the literature. The structure was solved from X-ray diffraction data that were collected 20 years ago with a molecular-replacement search model generated using AlphaFold ; the effectiveness of other search models was analyzed. Examination of the high-resolution ΔP1 structure revealed a solvent network that aids in maintaining the fold of the protein. On comparing the sequence and structure of P1 with a variety of type IV pilins, it was observed that there are cases of higher structural similarities between the phylogenetic groups of P. aeruginosa than there are between the same phylogenetic group, indicating that a structural grouping of pilins may be necessary in developing antivirulence drugs and vaccines. These analyses also identified the α–β loop as the most structurally diverse domain of the pilins, which could allow it to serve a role in pilus recognition. Studies of ΔP1 in vitro polymerization demonstrate that the optimal hydrophobic catalyst for the oligomerization of the pilus from strain K122 is not conducive for pilus formation of ΔP1; a model of a three-start helical assembly using the ΔP1 structure indicates that the α–β loop and the D-loop prevent in vitro polymerization.

Bragagnolo, Nicholas↗
DOE OSTI2025

Unique Structural Features Relate to Evolutionary Adaptation of Cytochrome P450 in the Abyssal Zone

Cytochromes P450 (CYPs) form one of the largest enzyme superfamilies, with similar structural folds yet biological functions varying from synthesis of physiologically essential compounds to metabolism of myriad xenobiotics. Sterol 14α-demethylases (CYP51s) represent a very special P450 family, regarded as a possible evolutionary progenitor for all currently existing P450s. In metazoans CYP51 is critical for the biosynthesis of sterols including cholesterol. Here we determined the crystal structures of ligand-free CYP51s from the abyssal fish Coryphaenoides armatus and human-. Comparative sequence–structure–function analysis revealed specific structural elements that imply elevated conformational flexibility, uncovering a molecular basis for faster catalytic rates, lower substrate selectivity, and intrinsic resistance to inhibition. In addition, the C. armatus structure displayed a large-scale repositioning of structural segments that, in vivo, are immersed in the endoplasmic reticulum membrane and border the substrate entrance (the FG arm, >20 Å, and the β4 hairpin, >15 Å). The structural distinction of C. armatus CYP51, which is the first structurally characterized deep sea P450, suggests stronger involvement of the membrane environment in regulation of the enzyme function. We interpret this as a co-adaptation of the membrane protein structure with membrane lipid composition during evolutionary incursion to life in the deep sea.

Biochemistry & Molecular Biology↗
DOE OSTI2024

Pairing a Global Optimization Algorithm with EXAFS to Characterize Lanthanide Structure in Solution

Ensemble-average sampling of structures from ab initio molecular dynamics (AIMD) simulations can be used to predict theoretical extended X-ray absorption fine structure (EXAFS) signals that closely match experimental spectra. However, AIMD simulations are time-consuming and resource-intensive, particularly for solvated lanthanide ions, which often form multiple nonrigid geometries with high coordination numbers. Here, to accelerate the characterization of lanthanide structures in solution, we employed the Northwest Potential Energy Surface Search Engine (NWPEsSe), an adaptive-learning global optimization algorithm, to efficiently screen first-shell structures. As case studies, we examine two systems: Eu(NO 3 ) 3 dissolved in acetonitrile with a terpyridine ligand (terpyNO 2 ), and Nd(NO 3 ) 3 dissolved in acetonitrile. The theoretical spectra for structures identified by NWPEsSe were compared to both experimental and AIMD-derived EXAFS spectra. The NWPEsSe algorithm successfully identified the proper solvation structure for both Eu(NO 3 ) 3 (terpyNO 2 ) and Nd(NO 3 )(acetonitrile) 3 , with the calculated EXAFS signals closely matching the experimental spectra for the Eu-ligand complex and showing good similarity for the Nd salt; the better agreement with the ligand-containing structure is attributed to a less dynamic coordination environment due to the rigid ligand. The key advantage of the global optimization algorithm lies in its ability to sample the coordination environment across the potential energy surface and reduce the time required to identify structures from generally a month to within a week. Additionally, this approach is versatile and can be adapted to characterize main-group metal complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Revealing the Nature of Binary-Phase on Structural Stability of Sodium Layered Oxide Cathodes

The emergence of layered sodium transition metal oxides featuring a multiphase structure presents a promising approach for cathode materials in sodium-ion batteries, showcasing notably improved energy storage capacity. However, the advancement of cathodes with multiphase structures faces obstacles due to the limited understanding of the integrated structural effects. Herein, the integrated structural effects by an in-depth structure-chemistry analysis in the developed layered cathode system Na x Cu 0.1 Co 0.1 Ni 0.25 Mn 0.4 Ti 0.15 O 2 with purposely designed P2/O3 phase integration, are comprehended. The results affirm that integrated phase ratio plays a pivotal role in electrochemical/structural stability, particularly at high voltage and with the incorporation of anionic redox. In contrast to previous reports advocating solely for the enhanced electrochemical performance in biphasic structures, it is demonstrated that an inappropriate composite structure is more destructive than a single-phase design. The in situ X-ray diffraction results, coupled with density functional theory computations further confirm that the biphasic structure with P2:O3 = 4:6 shows suppressed irreversible phase transition at high desodiated states and thus exhibits optimized electrochemical performance. Finally, these fundamental discoveries provide clues to the design of high-performance layered oxide cathodes for next-generation SIBs.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Incorporating geological structure into sensitivity analysis of subsurface contaminant transport

Simulating subsurface contaminant transport at the kilometer-scale often entails modeling reactive flow and transport within and through complex geologic structures. These structures are typically meshed by hand and as a result geologic structure is usually represented by one or a few deterministically generated geological models for uncertainty studies of flow and transport in the subsurface. Uncertainty in geologic structure can have a significant impact on contaminant transport. In this study, the impact of geologic structure on contaminant tracer transport in a shale formation is investigated for a simplified generic deep geologic repository for permanent disposal of spent nuclear fuel. An open-source modeling framework is used to perform a sensitivity analysis study on transport of two tracers from a generic spent nuclear fuel repository with uncertain location of the interfaces between the stratum of the geologic structure. The automated workflow uses sampled realizations of the geological structural model in addition to uncertain flow parameters in a nested sensitivity analysis. Concentration of the tracers at observation points within, in line with, and downstream of the repository are used as the quantities of interest for determining model sensitivity to input parameters and geological realization. Finally, the results of the study indicate that the location of strata interfaces in the geological structure has a first-order impact on tracer transport in the example shale formation, and that this impact may be greater than that of the uncertain flow parameters.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2026

GBOpt: Grain boundary structure optimization using Monte Carlo and evolutionary algorithms

Polycrystalline materials are made of many small crystals separated by grain boundaries (GBs), whose atomic structure strongly influences material properties. Because the structure of a GB determines its properties, the optimal structure must be known in order to determine those impacts. There are many ways of placing atoms in the GB region, but the optimal structure is defined as the one that gives the lowest value of a target property (typically energy). GB structure optimization has been successfully demonstrated using stochastic and evolutionary methods, but no reusable, community-maintained open-source workflow has been developed. GBOpt (Grain Boundary Optimization) is an open-source Python package that creates that workflow, where we have presently implemented two approaches: Markov Chain Monte Carlo, and genetic algorithm based on elite selection. We demonstrate this capability by successfully reproducing the known optimal structures of a specific GB in two materials, and point interested readers to the GitHub repository for additional examples, including optimization for different properties. Both of the implemented approaches recovered the known structures, with the genetic algorithm approach finding the optimal structure faster on average.

99 - GENERAL AND MISCELLANEOUS↗
DOE OSTI2024

Structural Asymmetry and Chiral-Induced Spin Selectivity in Chiral Palladium-Halide Semiconductors

Chiral Pb-free metal-halide semiconductors (MHSs) have attracted considerable attention in the field of spintronics due to various interesting spin-related properties and chiral-induced spin selectivity (CISS) effect. Despite their excellent chemical and structural tunability, the material scope and crystal structure of Pb-free chiral MHSs exhibiting the CISS effect are still limited; chiral MHSs that have metal-halide structures of octahedra and tetrahedra are only reported. Here, we report a new class of chiral MHSs, of which palladium (Pd)-halides are formed in 1D square-pyramidal structures or 0D square-planar structures, with a general formula of ((R/S-MBA) 2 PdBr 4 ) 1-x ((R/S-MBA) 2 PdCl 4 ) x (MBA = methylbenzylammonium; x = 0, 0.25, 0.5, 0.75, and 1) for the first time. The crystals adopt the 1D helical chain of Pd-halide square-pyramid (for x = 0, 0.25, 0.5, and 0.75) and 0D structure of Pd-halide square-plane (for x = 1). All the Pd-halides are distorted by the interaction between the halide and the chiral organic ammonium and arranged in a noncentrosymmetric position. Circular dichroism (CD) for ((R/S-MBA) 2 PdBr 4 ) 1-x ((R/S-MBA) 2 PdCl 4 ) x indicates that chirality was transferred from chiral organic ammonium to Pd-halide inorganics. ((R-MBA) 2 PdBr 4 ) 1-x ((R-MBA) 2 PdCl 4 ) x (x = 0, 0.25, 0.5, and 0.75) shows a distortion index of 0.127-0.128, which is the highest value among the previously reported chiral MHSs to the best of our knowledge. We also find that (R/S-MBA) 2 Pd(Br 1-x Cl x ) 4 crystals grow along the out-of-plane direction during spin coating and have high c-axis orientation and crystallinity, and (R/S-MBA) 2 Pd(Br 1-x Cl x ) 4 (x = 0 and 0.5) crystals exhibit a CISS effect in polycrystalline bulk films. In conclusion, these results demonstrate the possibility of a new metal-halide series with square-planar structures or square-pyramidal structures for future spintronic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

From sequence to protein structure and conformational dynamics with artificial intelligence/machine learning

The 2024 Nobel Prize in Chemistry was awarded in part for de novo protein structure prediction using AlphaFold2, an artificial intelligence/machine learning (AI/ML) model trained on vast amounts of sequence and three-dimensional structure data. AlphaFold2 and related models, including RoseTTAFold and ESMFold, employ specialized neural network architectures driven by attention mechanisms to infer relationships between sequence and structure. At a fundamental level, these AI/ML models operate on the long-standing hypothesis that the structure of a protein is determined by its amino acid sequence. More recently, AlphaFold2 has been adapted for the prediction of multiple protein conformations by subsampling multiple sequence alignments. Herein, we provide an overview of the deterministic relationship between sequence and structure, which was hypothesized over half a century ago with profound implications for the biological sciences ever since. We postulate that protein conformational dynamics are also determined, at least in part, by amino acid sequence and that this relationship may be leveraged for construction of AI/ML models dedicated to predicting protein conformational ensembles. Accordingly, we describe a conceptual model architecture, which may be trained on sequence data in combination with conformationally sensitive structural information, coming primarily from nuclear magnetic resonance (NMR) spectroscopy. Notwithstanding certain limitations in this context, NMR offers abundant structural heterogeneity conducive to conformational ensemble prediction. As NMR and other data continue to accumulate, sequence-informed prediction of protein structural dynamics with AI/ML has the potential to emerge as a transformative capability across the biological sciences.

Artificial intelligence↗
DOE OSTI2024

An idealized model for the crystal structure of intermetallic compounds isostructural with Mg 3 Cr 2 Al 18

Mg 3 Cr 2 Al 18 (abbreviated in this report as MCA) is the parent phase for a large class of intermetallic compounds that belong to the cubic crystal space group, $Fd\overline{3}m$. The purpose of this paper is to introduce an ideal, unrelaxed crystal structure for compounds isostructural with MCA. There are five distinct atomic sublattices in MCA compounds, which can be denoted, $A, B, C, D,$ and $E$. With this, a general description for MCA structures can be written as $A^{8a}_{1}B^{16c}_{2}C^{16d}_{2}D^{48f}_{6}E^{96g}_{12}$, where the superscripts represent the Wyckoff special equipoints associated with the various sublattices in MCA, and the subscripts indicate the contributions of each sublattice to the stoichiometry of one formula unit in an any given MCA structured compound. Sublattices D and E are where deviations from ideality occur in real, MCA-like compounds. This paper examines MCA bond lengths, nearest-neighbour polyhedral arrangements, 3-D sublattice crystal structures, 2-D atom tessellation patterns, and crystal chemical effects associated with atomic relaxations on the $D$ and $E$ sublattices. The ideal MCA crystal structure developed in this report provides an appropriate initial structure for use as input to crystal structure refinements of diffraction data for MCA-like phases being examined experimentally, or as input for computational, atomistic simulations of the structures of such compounds.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Structural stability, elemental ordering, and transport properties of layered ScTaN 2

Ternary transition metal (TM) nitrides have gained significant attention in thin film research due to their promising properties for a broad range of applications. Particularly, some of the ternary TM nitrides have been predicted to adopt layered structures that make them interesting for thermoelectric conversion and quantum materials applications. Unfortunately, synthesis of TM ternary nitride films by physical vapor deposition often favors disordered 3D structures rather than the predicted 2D-like layered structure. In this study, we investigate the structural interplay in the Sc-Ta-N ternary system using a combinatorial approach. Combinatorial libraries S⁢c 𝑥 ⁢T⁢a 1−𝑥 ⁢N are synthesized following a two-step method: First, deposit film precursors by cosputtering and then process the resulting 3D-structured samples with rapid thermal annealing. Synchrotron grazing-incidence wide-angle x-ray scattering on films annealed at 1200 ⁢°⁢C for 20 min leads to the nucleation of ScTaN 2 layered structure (𝑃⁢6 3 /𝑚⁢𝑚⁢𝑐) near stoichiometry. We find that the layered structure can accommodate large off-stoichiometry in the Ta-rich region (𝑥 < 0.5), facilitated by the alloying with quasi-isostructural Ta 5 ⁢N 6 compound that exists on a composition tie line at 𝑥 = 0. While focusing on ScTaN 2 , we estimate the long-range order parameter in near-stoichiometric films to be 0.86, corresponding to a fraction of Sc/Ta antisites of 7%. Transport measurements on ScTaN 2 reveal a nearly temperature-independent high carrier density (10 21 c⁢m −3 ), suggesting a heavily doped semiconductor or semimetallic character, consistent with a small positive Seebeck coefficient of +19 µV/K. The carrier mobility at 2 K is relatively small (9.5c⁢m 2 V −1 s −1 ) and the residual-resistivity ratio is minor, suggesting that electrical conduction is dominated by defects or disorder. Measured magnetoresistance suggests possible weak antilocalization at 2 K. This paper highlights the interplay between ScTaN 2 and Ta 5 ⁢N 6 crystal structures in stabilizing layered materials, emphasizes the importance of cation order/disorder for potential tunable alloys, and suggests that ScTaN 2 is a promising platform for exploring electronic properties.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Fast event-based electron counting for small-molecule structure determination by MicroED

Electron counting helped realize the resolution revolution in single-particle cryoEM and is now accelerating the determination of MicroED structures. Its advantages are best demonstrated by new direct electron detectors capable of fast (kilohertz) event-based electron counting (EBEC). This strategy minimizes the inaccuracies introduced by coincidence loss (CL) and promises rapid determination of accurate structures. We used the Direct Electron Apollo camera to leverage EBEC technology for MicroED data collection. Given its ability to count single electrons, the Apollo collects high-quality MicroED data from organic small-molecule crystals illuminated with incident electron beam flux densities as low as 0.01–0.045 e − /Å 2 /s. Under even the lowest flux density (0.01 e − /Å 2 /s) condition, fast EBEC data produced ab initio structures of a salen ligand (268 Da) and biotin (244 Da). Each structure was determined from a 100° wedge of data collected from a single crystal in as few as 50 s, with a delivered fluence of only ∼0.5 e − /Å 2 . Fast EBEC data collected with a fluence of 2.25 or 3.33 e − /Å 2 also facilitated a 1.5 Å structure of thiostrepton (1665 Da). While refinement of these structures appeared unaffected by CL, a CL adjustment applied to EBEC data further improved the distribution of intensities measured from the salen ligand and biotin crystals. However, CL adjustment only marginally improved the refinement of their corresponding structures, signaling the already high counting accuracy of detectors with counting rates in the kilohertz range. Overall, by delivering low-dose structure-worthy data, fast EBEC collection strategies open new possibilities for high-throughput MicroED.

EBEC↗
DOE OSTI2024

Molecular Vision - Multimodal, multitask retrieval of molecular structure from measured signatures for reference-free compound identification

We are currently at risk of generating false conclusions based on limited methods to identify small molecules in biological systems and in chemical forensics. By definition, the chemical structures of novel small molecules have not been determined, let alone measured or synthesized. Currently, unambiguous structure determination of small molecules is constrained by the time and effort needed to isolate compounds and perform de novo structure elucidation using laboratory-based methods, significantly extending the time to inform mitigation strategies. To address this gap, we have developed a deep learning approach to directly map molecular structure to experimental signatures. We aim to unify measurement technologies employed in untargeted small molecule identification studies—such as infrared (IR) spectrometry, tandem mass spectrometry (MS/MS), ion mobility spectrometry-derived collision cross section (CCS)—through use of a multimodal, multitask deep learning architecture. Where existing methods require direct generation of information-rich spectra and/or properties, an inherently difficult task, we will simplify molecular signature-based identification by posing the problem as a recognition or retrieval task. The model is thus presented with relevant endpoints – structure and one or more molecular signatures – and need only determine whether they are semantically related. Thus, our approach offers the following advantages over existing techniques: (i) circumvents difficulties associated with direct generation of molecular signatures from structure and structure from signatures; (ii) incorporates multiple molecular signatures simultaneously, as available, to support identification; and (iii) enables rapid computation of structural embeddings toward broad coverage of known chemical space. Taken together, the approach removes the need to explicitly obtain or compute reference spectra, representing a powerful method for compound identification that requires only experimentally observed signatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Comparative Analysis of TCR and TCR-pMHC Complex Structure Prediction Tools

The rapid development of computational approaches for predicting the structures of T cell receptors (TCRs) and TCR-peptide-major histocompatibility (TCR-pMHC) complexes, accelerated by AI breakthroughs such as AlphaFold, has made it feasible to calculate these structures with increasing accuracy. Although these tools show great potential, their relative accuracy and limitations remain unclear due to the lack of standardized benchmarks. Here, we systematically evaluate seven tools for predicting isolated TCR structures together with six tools for predicting TCR-pMHC complex structures. The methods include homology-based approaches, general prediction tools using AlphaFold, TCR-specific tools derived from AlphaFold2, and the newly developed tFold-TCR model. The evaluation uses a post-training data set comprising 40 αβ TCRs and 27 TCR-pMHC complexes (21 Class I and 6 Class II). Model accuracy is assessed at global, local, and interface levels using a variety of metrics. We find that each tool offers distinct advantages in various aspects of its predictions. AlphaFold2, AlphaFold3, and tFold-TCR excel in overall accuracy of TCR structure prediction, and TCRmodel2 and AlphaFold2 perform well in overall accuracy of TCR-pMHC structure prediction. However, TCR-specific tools derived from AlphaFold2 show lower accuracy in the framework region than both homology-based methods and general-purpose tools such as AlphaFold, and challenges remain for all in modeling CDR3 loops, docking orientations, TCR-peptide interfaces, and Class II MHC-peptide interfaces. Furthermore, these findings will guide researchers in selecting appropriate tools, emphasize the importance of using multiple evaluation metrics to assess model performance, and offer suggestions for improving TCR and TCR-pMHC structure prediction tools.

Chemical structure↗
DOE OSTI2025

Structural Phase Separation and Enhanced Superconductivity in La 1.875 Ba 0.125 CuO 4 Under Uniaxial Strain

Strain engineering has attracted significant attention in recent years due to its capability in tuning lattice and electronic structures of quantum materials. Using moderate uniaxial compressive strain, structural phase separation is induced in the low-temperature phase of x = 1/8 La 2-x Ba x CuO 4 (LBCO) single crystals. These structures are low temperature tetragonal (LTT), low temperature less orthorhombic (LTLO), and a plastically deformed nano-domain structure (PDNS), comprised of few-nanometer-sized orthorhombic domains within an amorphous matrix. These three structures exhibit distinct superconducting behaviors. The volume fraction of the LTT structure is suppressed with increasing strain, while its superconducting transition temperature increases and broadens. The LTLO structure exhibits a sharp superconducting transition above 32 K, which increases up to ≈ 36 K at maximum strain. The PDNS phase exhibits a very broad superconducting transition and persists even after removing the strain. This study illustrates the sensitivity of superconductivity to the structure of the LBCO sample near its stripe instability.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Visualizing and analyzing 3D biomolecular structures using Mol* at RCSB.org: Influenza A H5N1 virus proteome case study

The easiest and often most useful way to work with experimentally determined or computationally predicted structures of biomolecules is by viewing their three-dimensional (3D) shapes using a molecular visualization tool. Mol* was collaboratively developed by RCSB Protein Data Bank (RCSB PDB, RCSB.org) and Protein Data Bank in Europe (PDBe, PDBe.org) as an open-source, web-based, 3D visualization software suite for examination and analyses of biostructures. It is capable of displaying atomic coordinates and related experimental data of biomolecular structures together with a variety of annotations, facilitating basic and applied research, training, education, and information dissemination. Across RCSB.org, the RCSB PDB research-focused web portal, Mol* has been implemented to support single-mouse-click atomic-level visualization of biomolecules (e.g., proteins, nucleic acids, carbohydrates) with bound cofactors, small-molecule ligands, ions, water molecules, or other macromolecules. RCSB.org Mol* can seamlessly display 3D structures from various sources, allowing structure interrogation, superimposition, and comparison. Using influenza A H5N1 virus as a topical case study of an important pathogen, we exemplify how Mol* has been embedded within various RCSB.org tools—allowing users to view polymer sequence and structure-based annotations integrated from trusted bioinformatics data resources, assess patterns and trends in groups of structures, and view structures of any size and compositional complexity. In addition to being linked to every experimentally determined biostructure and Computed Structure Model made available at RCSB.org, Standalone Mol* is freely available for visualizing any atomic-level or multi-scale biostructure at rcsb.org/3d-view.

3D biostructure↗
DOE OSTI2025

Functional Relevance of CASP16 Nucleic Acid Predictions as Evaluated by Structure Providers

ABSTRACT Accurate biomolecular structure prediction enables the prediction of mutational effects, the speculation of function based on predicted structural homology, the analysis of ligand binding modes, experimental model building, and many other applications. Such algorithms to predict essential functional and structural features remain out of reach for biomolecular complexes containing nucleic acids. Here, we report a quantitative and qualitative evaluation of nucleic acid structures for the CASP16 blind prediction challenge by 12 of the experimental groups who provided nucleic acid targets. Blind predictions accurately model secondary structure and some aspects of tertiary structure, including reasonable global folds for some complex RNAs; however, predictions often lack accuracy in the regions of highest functional importance. All models have inaccuracies in non‐canonical regions where, for example, the nucleic‐acid backbone bends, deviating from an A‐form helix geometry, or a base forms a non‐standard hydrogen bond (not a Watson‐Crick base pair). These bends and non‐canonical interactions are integral to forming functionally important regions such as RNA enzymatic active sites. Additionally, the modeling of conserved and functional interfaces between nucleic acids and ligands, proteins, or other nucleic acids remains poor. For some targets, the experimental structures may not represent the only structure the biomolecular complex occupies in solution or in its functional life cycle, posing a future challenge for the community.

Biochemistry & Molecular Biology↗
DOE OSTI2024

Thermal conductivity of 3D-printed block-copolymer-inspired structures

This study primarily focuses on examining the impact that geometric structure has on thermal conductivity of multi-phase constructs in different 3D-printed poly(lactic acid), PLA, samples. The investigated structures are inspired by morphologies formed by diblock copolymers: lamellae, hexagonally packed cylinders, and gyroid. This research also investigates how volume percentage and material combination influence the thermal conductivity of these structures. Further, the samples can be tailored to simulate various thermal management structures observed in practical applications, such as thermal interface materials in electronic devices. Thermal conductivity ratio is controlled using air, the least conductive material at 0.026 W/(m K), PLA at 0.136 W/(m K), and thermal paste at 5.11 W/(m K). Different models were tested against thermal conductivity measurements in order to capture the effect of material type (PLA-Air versus PLA-Thermal Paste), volume percentage, structure, and orientation. Simple, effective medium models were good predictions of thermal conductivity in lamellar structures, but it was necessary to develop models for conduction through cylindrical and gyroid structures. Finally, all results were normalized to find a universal model that is independent of structure and material. This approach provides a simple method to predict how to reduce or enhance transport properties and heat management capabilities of 3D printed objects.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Effects of Composition and Oxidation States on the Structures of Chromium-Containing Sodium Silicate Glasses: Molecular Dynamics Simulations using Machine Learning Interatomic Potentials

Chromium represents a significant challenge for the vitrification of high-level nuclear waste into silicate and borosilicate glasses due to its low solubility and variable oxidation states, which can limit the waste loading due to promotion of crystallization or phase separation during processing. In this study, we modeled chromium containing silicate glasses using molecular dynamics simulations with three machine learning interatomic potentials (MLIPs), MACE, CHGNet, and PFP were employed, to gain insights on glass composition and oxidation states on the structures of these glasses. One of the goals is to evaluate their ability of these MLIPs to accurately represent the general structure of silicate glasses and chromium local environments as a function of chromium oxidation states. Density Functional Theory (DFT) based calculations and experimental data such as neutron structure factors were used to validate the structural models. It was found that the foundation models of all three MLIPs are able to reproduce general structural features of the sodium silicate glass structure consistent with experimental and DFT data, but only CHGNet and PFP can accurately capture the oxidation states and local environment of chromium: tetrahedral for Cr6+ and octahedral for Cr3+. Furthermore, we studied the effect of varying Cr3+/ Cr6+ (Cr3+/Crtotal) ratio and total chromium content using PFP. Our results show that Cr6+ enhances network polymerization by reducing non-bridging oxygens through Na? charge compensation required due to the formation of chromate (CrO42-) species, while Cr³? acts as a network modifier that disrupts connectivity. System size effects on the structural characteristics and chromium environments were also tested using the PFP potential. This work highlights the importance of careful validation on the precision, transferability, and potential of MLIPs for modeling glasses containing transition metal elements that can exist in multiple oxidation states. It is also encouraging to see the foundational models are all three MLFFs are able to reproduce the basic sodium silicate glass structures, while suggesting additional training or refining is needed to improve the description of more complex systems containing transition metals.

Puga, Christina L.↗