Search NASA⌕ Search

SEARCH · Search NASA

Results for “structural characteristics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS2020

On Orbit Flight Testing of the Roll-Out Solar Array

The Roll-Out Solar Array (ROSA) is an innovative, lightweight solar array with a flexible substrate that makes use of the stored strain energy in its composite structural members to provide deployment without the use of motors while still packaging efficiently. The ROSA flight experiment was launched to the International Space Station (ISS)on June 3rd, 2017 as a part of the eleventh SpaceX commercial resupply mission. After two weeks of storage, ROSA was extracted from the Dragon spacecraft, deployed, and put through a week of tests to verify its structural characteristics as well as the performance of photovoltaics. The structural dynamics experiments included active excitation of out-of-plane bending modes, and a study of the thermal-structural interaction of the structure during day-night transitions. Data was gathered from a small number of accelerometers located at key points on the solar array and from cameras observing numerous photogrammetry targets spread out over the structure and the photovoltaic blanket. The goal in this effort was to better understand the performance of ROSA and to improve modeling efforts for future designs of similar solar arrays. Of particular interest are the first few system modes and mode shapes of the array, the amount of structural damping present, and degree of structural-thermal interaction seen during eclipse exit.

ROSA↗
NASA NTRSDate not supplied

Wind Tunnel to Full Scale Mapping of Winds and Loads for Launch-Vehicle Ground Wind Loads

A launch vehicle ground-wind-loads program was conducted at the NASA Langley Transonic Dynamics Tunnel. The objectives were to quantify key aerodynamic and structural characteristics that impact the occurrence of large wind-induced oscillations of a launch vehicle when exposed to ground winds prior to launch. Of particular interest is the dynamic response of a launch vehicle when a von Kármán vortex street forms in the wake of the vehicle resulting in quasiperiodic lift and drag forces.Vehicle response to these quasiperiodic forces can become quite large when the frequency of vortex shedding nears that of a lowly-damped structural mode thereby exciting a resonant response. The study of ground-wind-loads presents unique challenges to quantify significant characteristics of the approaching wind and to relate the wind-tunnel acquired static, dynamic, and gravitational loads to full-scale vehicles. This paper will explain the correlation process between model-scale and full-scale wind characteristics and resulting structural loads. Characterization of the wind at a launch site requires knowledge of the vehicle dynamics and the anemometer performance. Vehicle dynamics dictate the frequency range of interest in characterization of the atmospheric turbulence, and in defining the required data window-length to model dynamic oscillation build-up during wind-gust analysis. Knowledge of the anemometer performance is required to infer peak wind magnitudes since most anemometers cannot directly measure instantaneous peak values. Following proper wind-speed correlation, static and dynamic wind-tunnel loads must be converted to full-scale equivalent values to derive design and operational guidance. In addition to the direct computation of full-scale equivalent loads using relevant scaling parameters, the corrections applied to dynamic loads accounting for differences in structural damping will also be discussed. Furthermore, a phenomenon that manifests in many slender and flexible launch vehicles is a load magnification due to gravity resulting from mass offset under deflection. A method for scaling this contribution from model-scale to full-scale is presented. Finally, a comparison of wind-tunnel derived loads using the described methodologies to launch vehicle measured loads is presented.

ground wind loads↗
NASA NTRSDate not supplied

Wind-Tunnel to Full-Scale Mapping of Winds and Loads for Launch-Vehicle Ground Wind Loads

A launch vehicle ground-wind-loads program was conducted at the NASA Langley Transonic Dynamics Tunnel. The objectives were to quantify key aerodynamic and structural characteristics that impact the occurrence of large wind-induced oscillations of a launch vehicle when exposed to ground winds prior to launch. Of particular interest is the dynamic response of a launch vehicle when a von Kármán vortex street forms in the wake of the vehicle resulting in quasiperiodic lift and drag forces. Vehicle response to these quasiperiodic forces can become quite large when the frequency of vortex shedding nears that of a lowly-damped structural mode thereby exciting a resonant response. The study of ground-wind-loads presents unique challenges to quantify significant characteristics of the approaching wind and to relate the wind-tunnel acquired static, dynamic, and gravitational loads to full-scale vehicles. This paper will explain the correlation process between model-scale and full-scale wind characteristics and resulting structural loads. Characterization of the wind at a launch site requires knowledge of the vehicle dynamics and the anemometer performance. Vehicle dynamics dictate the frequency range of interest in characterization of the atmospheric turbulence, and in defining the required data window-length to model dynamic oscillation build-up during wind-gust analysis. Knowledge of the anemometer performance is required to infer peak wind magnitudes since most anemometers cannot directly measure instantaneous peak values. Following proper wind-speed correlation, static and dynamic wind-tunnel loads must be converted to full-scale equivalent values to derive design and operational guidance. In addition to the direct computation of full-scale equivalent loads using relevant scaling parameters, the corrections applied to dynamic loads accounting for differences in structural damping will also be discussed. Furthermore, a phenomenon that manifests in many slender and flexible launch vehicles is a load magnification due to gravity resulting from mass offset under deflection. A method for scaling this contribution from model-scale to full-scale is presented. Finally, a comparison of wind-tunnel derived loads using the described methodologies to launch vehicle measured loads is presented.

Ground wind loads↗
NASA NTRS1971

Lava tubes and channels in the Lunar Marius Hills.

The Marius Hills region, a volcanic plateau in Oceanus Procellarum, contains numerous rilles, rille-like structures, and chains of elongate craters. Most of these structures characteristically: (1) originate on or near irregular shaped craters associated with features previously interpreted as volcanic domes, (2) trend downslope onto Plateau Plains, (3) generally taper in width and become shallower, (4) are often discontinuous, (5) occupy the center, or apparent crest of a broad ridge, (6) may contain cut-off branches and distributary structures, and (7) may have local reversals in longitudinal slope. Structures having these characteristics are interpreted to be lava channels or partly collapsed lava tubes. Terrestrial lava tubes form exclusively, and commonly, in fluid basalt flows. Recent evidence indicates that viscosities of lunar mare 'basalt' lava flows were conducive for lava tube formation. Terrestrial analogs are offered for structures described in the Marius Hills.

Greeley, R.↗
NASA NTRS1977

Structural stiffness, strength and dynamic characteristics of large tetrahedral space truss structures

Physical characteristics of large skeletal frameworks for space applications are investigated by analyzing one concept: the tetrahedral truss, which is idealized as a sandwich plate with isotropic faces. Appropriate analytical relations are presented in terms of the truss column element properties which for calculations were taken as slender graphite/epoxy tubes. Column loads, resulting from gravity gradient control and orbital transfer, are found to be small for the class structure investigated. Fundamental frequencies of large truss structures are shown to be an order of magnitude lower than large earth based structures. Permissible loads are shown to result in small lateral deflections of the truss due to low-strain at Euler buckling of the slender graphite/epoxy truss column elements. Lateral thermal deflections are found to be a fraction of the truss depth using graphite/epoxy columns.

Mikulas, M. M., Jr.↗
NASA NTRS1990

Power flow analysis of two coupled plates with arbitrary characteristics

In the last progress report (Feb. 1988) some results were presented for a parametric analysis on the vibrational power flow between two coupled plate structures using the mobility power flow approach. The results reported then were for changes in the structural parameters of the two plates, but with the two plates identical in their structural characteristics. Herein, limitation is removed. The vibrational power input and output are evaluated for different values of the structural damping loss factor for the source and receiver plates. In performing this parametric analysis, the source plate characteristics are kept constant. The purpose of this parametric analysis is to determine the most critical parameters that influence the flow of vibrational power from the source plate to the receiver plate. In the case of the structural damping parametric analysis, the influence of changes in the source plate damping is also investigated. The results obtained from the mobility power flow approach are compared to results obtained using a statistical energy analysis (SEA) approach. The significance of the power flow results are discussed together with a discussion and a comparison between the SEA results and the mobility power flow results. Furthermore, the benefits derived from using the mobility power flow approach are examined.

Cuschieri, J. M.↗
NASA NTRS1983

Feature selection and information content of thematic mapper simulator data for a forested environment

Feature selection and the information content of Thematic Mapper Simulator (TMS) data are investigated for a forested region in northern Idaho. The optimal TMS channels for forest structural characteristics are determined, and the capability of TMS data to describe the structural variability within a forest stand is evaluated. The comparative performance of TMS and MSS data to discriminate forest structural factors using per-pixel maximum likelihood classification is examined, and four optimal TMS channels are classified in order to ascertain if the full complement of TM channels provide higher accuracies than the four optimal ones.

Spanner, M. A.↗
NASA NTRS2001

Data Mining of NASA Boeing 737 Flight Data: Frequency Analysis of In-Flight Recorded Data

Data recorded during flights of the NASA Trailblazer Boeing 737 have been analyzed to ascertain the presence of aircraft structural responses from various excitations such as the engine, aerodynamic effects, wind gusts, and control system operations. The NASA Trailblazer Boeing 737 was chosen as a focus of the study because of a large quantity of its flight data records. The goal of this study was to determine if any aircraft structural characteristics could be identified from flight data collected for measuring non-structural phenomena. A number of such data were examined for spatial and frequency correlation as a means of discovering hidden knowledge of the dynamic behavior of the aircraft. Data recorded from on-board dynamic sensors over a range of flight conditions showed consistently appearing frequencies. Those frequencies were attributed to aircraft structural vibrations.

Butterfield, Ansel J.↗
NASA NTRS1982

Overview of large space systems/propulsion interactions

Large space structure characteristics, antenna controller design, the attitude control system, mission grouping, propulsion system/large space structure interactions, structural mass impact for start transient effects, box truss multiple thrust point effects, and large space structure/propulsion issues are illustrated.

Carlisle, R. F.↗
NASA NTRS1984

Conceptual design for scaled truss antenna flight experiment

The conceptual design for a scaled truss antenna structures experiment program (STASEP) is presented. The hardware analysis of the scaled truss antenna structure (STAS) was performed by interactive design and evaluation of advanced spacecraft (IDEAS) computer aided, interactive, design and analysis program. Four STAS's were designed to be launched by the Shuttle, tested by using the space technology experiments platform (STEP) and space transportation system (STS), and then free flown in short lifetime orbits. Data were gathered on deployment, structural characteristics, geometric accuracies, thermal performance, and drag and lifetime as an orbiting spacecraft. Structural and thermal properties were determined for the STAS, including mass properties, thermal loading, structural natural frequencies, and mode shapes. The necessary analysis, scaling, and ground testing are discussed.

Lee, W. H.↗
NASA NTRS1995

Intermittent turbulence in solar wind from the south polar hole

The magnetic fields measured by the Ulysses spacecraft are used to study solar wind turbulence in the fast solar wind from the south polar hole. The spacecraft was at about 46 deg south latitude and 3.9 AU. For a magnetic field with a Gaussian distribution the power spectrum (second-order structure function) is sufficient to completely characterize the turbulence. However, the actual distribution is non-Gaussian so that the effects of intermittency must be taken into account. The observed spectral exponents include effects of intermittency and cannot be directly compared with the standard second-order spectral theories such as the Kolmogorov and Kraichnan theories. To permit a better comparison of the observations with the theoretical models, we study the structure characteristics of the data. We find the exponents of the second-order structure functions (power spectra) and the higher-order normalized structure functions for the components of the magnetic fields. We show that these sets of exponents can be approximately described by two basic numbers: the spectral exponent and the intermittency exponent. The intermittency exponent characterizes correlation properties of the energy cascade from large to small scales. Before comparing the observations to the theoretically expected values, a reduction must be made to the observed spectral exponent. The amount of the reduction depends on both the intermittency exponent and the model of the energy cascade assumed in the turbulence theory. We reduce the measured spectral indices according to a simple model for Alfven turbulence that is described here. We then compare our reduced spectral indices with second-order spectral theory. The reduced spectral indices for the period range of 1 min to about a half hour are remarkably constant and in good agreement with the value of 3/2. Thus our treatment is self-consistent. Our tentative conclusion is that the high-frequency turbulence appears to agree with the model of random-phased Alfven waves. This tentative conclusion must be tested by further theoretical and observational work.

Ruzmaikin, A. A.↗
NASA NTRS1982

Solar Array Flight Experiment (SAFE)

The solar arrays flight experiment consists of four experiments on two different flights. The first experiment, termed the baseline, has a basic purpose to demonstrate the flight readiness of lightweight solar array technology for solar electric propulsion and other payload power applications. The early availability of this experiment and its basic large space structure characteristics make it a logical candidate to demonstrate other disciplines critical to large space structures. These demonstrations form the basis for three other solar array experiments, two in remote sensing and one in control. All of these experiments are briefly reviewed in this paper.

Schock, R. W.↗
NASA NTRS1982

Control pole placement relationships

Using a simplified Large Space Structure (LSS) model, a technique was developed which gives algebraic relationships for the unconstrained poles. The relationships, which were obtained by this technique, are functions of the structural characteristics and the control gains. Extremely interesting relationships evolve for the case when the structural damping is zero. If the damping is zero, the constrained poles are uncoupled from the structural mode shapes. These relationships, which are derived for structural damping and without structural damping, provide new insight into the migration of the unconstrained poles for the CFPPS.

Ainsworth, O. R.↗
NASA NTRS1983

A preliminary look at control augmented dynamic response of structures

The augmentation of structural characteristics, mass, damping, and stiffness through the use of control theory in lieu of structural redesign or augmentation was reported. The standard single-degree-of-freedom system was followed by a treatment of the same system using control augmentation. The system was extended to elastic structures using single and multisensor approaches and concludes with a brief discussion of potential application to large orbiting space structures.

Ryan, R. S.↗
NASA NTRS1983

A preliminary look at control augmented dynamic response of structures

This report deals with the augmentation of structural characteristics, mass, damping, and stiffness through the use of control theory in lieu of structural redesign or augmentation. Treated first is the standard single-degree-of-freedom system followed by a treatment of the same system using control augmentation. The system is extended to elastic structure using single and multisensor approaches and concludes with a brief discussion of potential application to large orbiting space structures.

Jewell, R. E.↗
NASA NTRS1986

Vibration of a large space beam under gravity effect

The structural characteristics of a large simply supported beam subjected to gravity are described. The nonlinear governing equations for both the static and the dynamic response are derived and solved analytically. The results show the feasibility of verifying the on-orbit dynamic characteristics of a large space beam by utilizing ground test data of such a structure. It is noted that the gravity effect interacts mostly with the first vibration mode. It was also found that the system of a large space beam subjected to its own weight is a hardening system. The differential equation for the asymmetric mode is a Duffing type equation. However, the governing equation for the symmetric mode has an additional quadratic term. It is this term that causes the maximum vibration amplitudes at different phases to be non-identical.

Shih, C.-F.↗
NASA NTRS1991

Structural investigation of protein kinase C inhibitors

The phospholipid and Ca2+ dependent protein kinase (PKC) plays an essential role in a variety of cellular events. Inhibition of PKC was shown to arrest growth in tumor cell cultures making it a target for possible antitumor therapy. Calphostins are potent inhibitors of PKC with high affinity for the enzyme regulatory site. Structural characteristics of calphostins, which confer the inhibitory activity, are investigated by comparing their optimized structures with the existing models for PKC activation. The resulting model of inhibitory activity assumes interaction with two out of the three electrostatic interaction sites postulated for activators. The model shows two sites of hydrophobic interaction and enables the inhibitory activity of gossypol to be accounted for.

NASA Discipline Exobiology↗
NASA NTRS2002

Conservation of Pax gene expression in ectodermal placodes of the lamprey

Ectodermal placodes contribute to the cranial ganglia and sense organs of the head and, together with neural crest cells, represent defining features of the vertebrate embryo. The identity of different placodes appears to be specified in part by the expression of different Pax genes, with Pax-3/7 class genes being expressed in the trigeminal placode of mice, chick, frogs and fish, and Pax-2/5/8 class genes expressed in the otic placode. Here, we present the cloning and expression pattern of lamprey Pax-7 and Pax-2, which mark the trigeminal and otic placodes, respectively, as well as other structures characteristic of vertebrate Pax genes. These results suggest conservation of Pax genes and placodal structures in basal and derived vertebrates.

NASA Discipline Evolutionary Biology↗