Search NASA⌕ Search

SEARCH · Search NASA

Results for “subset sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

X-Ray Temperatures, Luminosities, and Masses from XMM-Newton Follow-up of the First Shear-selected Galaxy Cluster Sample

We continue the study of the first sample of shear-selected clusters from the initial 8.6 square degrees of the Deep Lens Survey (DLS); a sample with well-defined selection criteria corresponding to the highest ranked shear peaks in the survey area. We aim to characterize the weak lensing selection by examining the sample’s X-ray properties. There are multiple X-ray clusters associated with nearly all the shear peaks: 14 X-ray clusters corresponding to seven DLS shear peaks. An additional three X-ray clusters cannot be definitively associated with shear peaks, mainly due to large positional offsets between the X-ray centroid and the shear peak. Here we report on the XMM-Newton properties of the 17 X-ray clusters. The X-ray clusters display a wide range of luminosities and temperatures; the L {sub X} − T {sub X} relation we determine for the shear-associated X-ray clusters is consistent with X-ray cluster samples selected without regard to dynamical state, while it is inconsistent with self-similarity. For a subset of the sample, we measure X-ray masses using temperature as a proxy, and compare to weak lensing masses determined by the DLS team. The resulting mass comparison is consistent with equality. The X-ray and weak lensing masses show considerable intrinsic scatter (∼48%), which is consistent with X-ray selected samples when their X-ray and weak lensing masses are independently determined.

79 ASTRONOMY AND ASTROPHYSICS↗

Microbial Monitoring of New Cleanrooms Used to Curate Astrobiologically Relevant Asteroid Samples from Bennu and Ryugu

Introduction: NASA has constructed two new cleanrooms to house materials from the OSRIS-REx and Hayabusa2 missions to the asteroids Ryugu (162173) and Bennu (101955), respectively. In accordance with standard astromaterials curation practices, these cleanrooms will be monitored for particulate contamination and maintained to ISO 5 equivalent standards1. Since the samples in these collections are expected to contain prebiotic organic compounds that may help explain the origin of life on Earth, these labs will also be monitored for organic and biological contamination2. Samples from Ryugu arrived on Earth in December, 2020. After basic characterization in Japan, NASA received a subset of these samples at the astromaterials curation facility in Houston in December of 2021. OSIRIS-REx is expected to return samples in September, 2023. Here we present preliminary microbial monitoring results from monthly monitoring of these new labs and the connected microtomy and staging areas that support them, as they are being commissioned. We also compare these results to baseline values for other astromaterials curation labs. We will also briefly describe additional cleaning efforts employed to reduce the bioburden in these new cleanrooms. Methods: Microbial samples were collected from surfaces using a dry macrofoam swab (Puritan Brand 2518051PFRNDFD). Swabs were also opened in the lab but not touched to any surfaces to function as negative controls. Samples and controls were processed inside a class II biosafety cabinet to avoid inadvertent cross contamination. The swabs were suspended in 15 ml of PBS (Phosphate Buffered Saline) and vortexed for 20 seconds to remove cells from the swab surface. The PBS was used to inoculate Petri dishes filled with TSA (Tryptic Soy Agar), Blood Agar, or Reasoners 2 agar to check for microbial growth. Each plate was inoculated with 0.1 ml of PBS. The TSA and blood agar plates were incubated at 35˚C and the Reasoners 2 agar plates were incubated at 25˚C for seven days. Petri dishes filled with Potato dextrose agar, Saboraud dextrose agar, or Saboraud dextrose agar with 0.1 mg/ml of chloramphenicol, an antibiotic, were used to check for fungal growth. These plates were inoculated with 0.3 ml of PBS and incubated at 30˚C. The remaining PBS was frozen at -80 ˚C for DNA sequencing. After incubation, isolates were counted and reisolated for identification. Isolates were identified using the VITEK23 system or by sequencing a portion of the 16S rRNA gene for bacteria or the ribosomal internal transcribed spacer (ITS) for fungi. Sequencing was performed with an ABI 3500 Sanger sequencer. Results: During our initial sampling, six of the seven sites sampled (86%) displayed bacterial or fungal growth. Samples collected from the staging areas and microtomy labs are not included in this calculation since those areas are maintained at a lower ISO 7 equivalent cleanliness standard. A month later, only three of the seven sites (43%) displayed bacterial growth. No fungal growth was detected in the second sampling. Since new equipment had been introduced to the Hayabusa2 lab since the first round of sampling, an additional three sampling sites were included in the second round of sampling. None of these sites displayed microbial growth. These sites will be included in all future sampling efforts. Bacterial isolates have been identified from the following genera at multiple time points: Micrococcus, Staphylococcus, and Bacillus. Isolates from the genera: Microbacterium, Nocardioides, Methylocystis, and Microvirga were identified in the initial sampling, but were not present at later time points. Identification of fungal isolates is in progress. Results are summarized in Table 1. Discussion: The recovery rate or percentage of positive samples4 was initially 86%, which is higher than the median recovery rate for comparable ISO 5 equivalent curation labs like Stardust (33%), Hayabusa (33%), and Cosmic Dust (50%). However, after a month of operation, the recovery rate for these same sites decreased to 43%, which is similar to what we observe in comparable curation cleanrooms with no microbial control requirements. Adding in the new sampling sites further decreases the recovery rate to 30%. With the reduction in recovery rate, we also observed a decrease in microbial diversity. At the first time point, we observed at least 10 different bacterial species and at least two different fungi. This is a higher diversity than the median values for comparable ISO 5 equivalent labs (2-4 isolates per sampling event). After the second sampling, we observed at least 4 bacterial species and no fungi, which is more consistent with comparable labs. We expect the recovery rate and diversity in both labs to continue to decrease as routine operation continues. We will use ultrapure hydrogen peroxide to disinfect equipment and work areas prior to opening any sample containers. Most of the bacterial and fungal isolates were detected on samples from the cleanroom floors. This is consistent with baseline results from other curation labs. Organisms from the genera Bacillus, Staphylococcus, and Micrococcus that were repeatedly detected are common in cleanrooms and on human skin5,6. These organisms are generally thought to be introduced when people enter the cleanroom. Microbacterium, Nocardioides, and Microvirga have also previously been identified in astromaterials cleanrooms, but not as frequently as Bacillus, Staphylococcus, and Micrococcus. Methylocystis is a novel genus in the astromaterials cleanrooms, but it was identified with low accuracy (93% match in the sequenced region of the 16S rRNA gene) and further work is needed to confirm this identification. Microbacterium is a diverse genus with isolates identified from terrestrial and aquatic sediments. Some species of Microbacterium are capable of degrading complex organic compounds found in crude oil. The presence of these bacteria in the OSIRIS REx and Hayabusa2 cleanrooms should be closely monitored. Methylocystis is a genus of methanotrophic bacteria capable of oxidizing methane. If this identification proves to be correct and it is detected again, it should be closely monitored as well. Under nominal operating conditions, samples should not ever encounter the cleanroom floor or other high traffic areas. If we observe an increase in the bioburden in sensitive work areas that appears to be influenced by organism transfer from high traffic areas like the floors, we can employ additional hydrogen peroxide treatments to disinfect high traffic areas. Routine microbial monitoring of these labs will ensure that NASA’s astromaterials collections remain pristine and useful for scientific study. Table 1. Sampling Locations and Colony Counts Bacterial CFUa Fungal CFU Bacterial CFU Fungal CFU Lab - Location 11/2/2021 11/2/2021 12/13/2021 12/13/2021 H2b-Floor 4 8 1 0 H2-staging pass through 3 0 0 0 H2-microtomy pass through TNTCc 0 0 0 H2 Microscope 1 NA NA 0 0 H2 Microscope 2 NA NA 0 0 H2-Table NA NA 0 0 OREXd- microtomy pass through 0 0 6 0 OREX – Anteroom pass through 0 0 0 0 OREX – Floor 1 2 0 0 OREX Witness Foil Table 3 0 1 0 Staging-Floor 16 0 15 0 Microtomy-Floor 3 0 2 0 a: CFU = Colony Forming Unit b: H2 = Hayabusa2 Lab c: TNTC = too numerous to count d: OREX = OSIRIS-REx Lab References: 1. ISO 14644-1:2015 - Cleanrooms and associated controlled environments -- Part 1: Classification of air cleanliness by particle concentration. 37 (2015). 2. McCubbin, F. M. et al. Space Sci Rev 215, (2019). 3. Pincus, D. H. Encyclopedia of Rapid Microbiological Methods (2005). 4. The United States Pharmacopeial Convention. USP General Chapter <1116> 17, 784–794 (2013). 5. Sheraba, N. S., Yassin, A. S. & Amin, M. BMC Research Notes 3, 278 (2010). 6. Utescher, C. L. de A., Franzolin, M. R., Trabulsi, L. R. & Gambale, V. Brazilian Journal of Microbiology 38, 710–716 (2007).

A B Regberg↗

INFRARED COLORS OF THE GAMMA-RAY-DETECTED BLAZARS

Blazars constitute the most enigmatic class of extragalactic {gamma}-ray sources, and their observational features have been ascribed to a relativistic jet closely aligned to the line of sight. They are generally divided in two main classes: the BL Lac objects (BL Lacs) and the flat-spectrum radio quasars (FSRQs). In the case of BL Lacs the double-bumped spectral energy distribution (SED) is generally described by the synchrotron self-Compton (SSC) emission, while for the FSRQs it is interpreted as due to external Compton (EC) emission. Recently, we showed that in the [3.4]-[4.6]-[12] {mu}m color-color diagram the blazar population covers a distinct region (i.e., the WISE blazar Strip (WBS)) clearly separated from the other extragalactic sources that are dominated by thermal emission. In this paper, we investigate the relation between the infrared and {gamma}-ray emission for a subset of confirmed blazars from the literature, associated with Fermi sources, for which WISE archival observations are available. This sample is a proper subset of the sample of sources used previously, and the availability of Fermi data is critical to constrain the models on the emission mechanisms for the blazars. We found that the selected blazars also lie on the WBS covering a narrower region of the infrared color-color planes than the overall blazar population. We then found an evident correlation between the IR and {gamma}-ray spectral indices expected in the SSC and EC frameworks. Finally, we determined the ratio between their {gamma}-ray and infrared fluxes, a surrogate of the ratio of powers between the inverse Compton and the synchrotron SED components, and used such parameter to test different blazar emitting scenarios.

79 ASTRONOMY AND ASTROPHYSICS↗

Metagenome-assembled genomes from topsoils collected during NEON campaign in East River, CO (06/14/2018-06/28/2018)

The Watershed Function Science Focus Area (WF SFA) at Lawrence Berkeley National Lab is working to build a mechanistic understanding of the distribution and dynamics of biogeochemical processes in mountainous watersheds and their response to perturbation. In June 2018, the NEON (National Ecological Observatory Network) Airborne Observatory Platform (AOP) performed a taskable airborne imaging campaign to collect visible to shortwave infrared (VSWIR) imaging spectroscopy and LiDAR data across 330 km2 in the Upper East River at Crested Butte, CO. We conducted a parallel ground sampling campaign to sample vegetation traits, as well as soil physical, chemical, and microbiological characteristics. We collected these samples from 438 sites across 12 locations spanning much of the elevation, topographic, and geologic variability across the study area. A subset of 250 samples were used for soil metagenomics which is presented here. In addition, at each site, vegetation samples were collected to measure species-specific leaf water content and leaf mass area, foliar elemental composition and foliar CN stable isotope ratios. Soil samples were collected to measure soil physical properties which include bulk density and soil texture analysis. A suite of soil chemical properties was measured from the samples collected at each site, including pH, organic matter, concentrations exchangeable cations, total elemental composition, and the concentrations of extractable N pools (e.g. total free amino acids, ammonium, nitrate, dissolved organic N, and total dissolved N). Additionally, we have measured soil microbial biomass CN stoichiometry. Here, we present 1982 metagenome-assembled genomes (MAGs) for the bacterial and archaeal community from topsoil collected from during NEON 2018 campaign. All metagenomes were sequenced at JGI (Joint Genome Institute) (GOLD Study ID: Gs0149986). Metagenomes were assembled using JGI Metagenome Workflow (10.1128/mSystems.00804-20). The dataset includes (1) zip files for 1982 MAG fasta files (neon_genomes1-5.tar.gz, split into 5 tarballs to keep tarballs under 0.5 GB), (2) neon_Gs0149986_samples_soilproperties_metagenomes.csv: the sample information together with the accession numbers for the underlying metagenomes and the associated soil physical and chemical measurements in NMDC (National Microbiome Data Collaborative) compliant format, (3) neon_Gs0149986.kml: location bounding box file for the sampled locations, (4) samples.csv: sample metadata file used to register Internationall Generic Sample Numbers (IGSNs), (5) flmd.csv: file level metadata file, and (6) dd.csv: data dictionary file. This work was supported by the Watershed Function Science Focus Area at Lawrence Berkeley National Laboratory funded by the US Department of Energy, Office of Science, Biological and Environmental Research under Contract No. DE-AC02-05CH11231.

2018 NEON and 2025 CHESS Campaigns↗

Development of Genesis Solar Wind Sample Cleanliness Assessment: Initial Report on Sample 60341 Optical Imagery and Elemental Mapping

Since 2005 the Genesis science team has experimented with techniques for removing the contaminant particles and films from the collection surface of the Genesis fragments. A subset of ~40 samples have been designated as "cleaning matrix" samples. These are small samples to which various cleaning approaches are applied and then cleanliness is assessed optically, by TRXRF, SEM, ToF-SIMS, XPS, ellipsometry or other means [1-9]. Most of these sam-ples remain available for allocation, with cleanliness assessment data. This assessment allows evaluation of various cleaning techniques and handling or analytical effects. Cleaning techniques investigated by the Genesis community include acid/base etching, acetate replica peels, ion beam, and CO2 snow jet cleaning [10-16]. JSC provides surface cleaning using UV ozone exposure and ultra-pure water (UPW) [17-20]. The UPW rinse is commonly used to clean samples for handling debris between processing by different researchers. Optical microscopic images of the sample taken before and after UPW cleaning show what has been added or removed during the cleaning process.

Gonzalez, C. P.↗

The SDSS-IV MaNGA Sample: Design, Optimization, and Usage Considerations

We describe the sample design for the SDSS-IV MaNGA survey and present the final properties of the main samples along with important considerations for using these samples for science. Our target selection criteria were developed while simultaneously optimizing the size distribution of the MaNGA integral field units (IFUs), the IFU allocation strategy, and the target density to produce a survey defined in terms of maximizing signal-to-noise ratio, spatial resolution, and sample size. Our selection strategy makes use of redshift limits that only depend on i-band absolute magnitude (M {sub i}), or, for a small subset of our sample, M {sub i} and color (NUV − i). Such a strategy ensures that all galaxies span the same range in angular size irrespective of luminosity and are therefore covered evenly by the adopted range of IFU sizes. We define three samples: the Primary and Secondary samples are selected to have a flat number density with respect to M {sub i} and are targeted to have spectroscopic coverage to 1.5 and 2.5 effective radii (R {sub e}), respectively. The Color-Enhanced supplement increases the number of galaxies in the low-density regions of color–magnitude space by extending the redshift limits of the Primary sample in the appropriate color bins. The samples cover the stellar mass range 5×10{sup 8}⩽M{sub ∗}⩽3×10{sup 11} M{sub ⊙} h{sup −2} and are sampled at median physical resolutions of 1.37 and 2.5 kpc for the Primary and Secondary samples, respectively. We provide weights that will statistically correct for our luminosity and color-dependent selection function and IFU allocation strategy, thus correcting the observed sample to a volume-limited sample.

79 ASTRONOMY AND ASTROPHYSICS↗

2015 Long-Term Hydrologic Monitoring Program Sampling and Analysis Results at Rio Blanco, Colorado

The U.S. Department of Energy (DOE) Office of Legacy Management conducted annual sampling at the Rio Blanco, Colorado, Site for the Long-Term Hydrologic Monitoring Program (LTHMP) on May 20–21, 2015. This report documents the analytical results of the Rio Blanco annual monitoring event, the trip report, and the data validation package. The groundwater and surface water monitoring samples were shipped to the GEL Group Inc. laboratories for conventional analysis of tritium and analysis of gamma-emitting radionuclides by high-resolution gamma spectrometry. A subset of water samples collected from wells near the Rio Blanco site was also sent to GEL Group Inc. for enriched tritium analysis. All requested analyses were successfully completed. Samples were collected from a total of four onsite wells, including two that are privately owned. Samples were also collected from two additional private wells at nearby locations and from nine surface water locations. Samples were analyzed for gamma-emitting radionuclides by high-resolution gamma spectrometry, and they were analyzed for tritium using the conventional method with a detection limit on the order of 400 picocuries per liter (pCi/L). Four locations (one well and three surface locations) were analyzed using the enriched tritium method, which has a detection limit on the order of 3 pCi/L. The enriched locations included the well at the Brennan Windmill and surface locations at CER-1, CER-4, and Fawn Creek 500 feet upstream.

54 ENVIRONMENTAL SCIENCES↗

Summary and Preliminary Interpretation of Tritium and Dissolved Noble Gas Data from Site 300

In October 2013, groundwater samples were collected from 10 wells from Site 300 and analyzed by the Environmental Radiochemistry Laboratory at Lawrence Livermore National Laboratory (LLNL). Groundwater samples were analyzed for groundwater age tracers: tritium, the helium isotope ratio of dissolved helium and the concentrations of dissolved noble gases (Helium, Neon, Argon, Krypton, and Xenon). A subset of the samples was also analyzed for excess nitrogen due to saturated zone denitrification. The age-dating data were used to evaluate the degree to which groundwater at a particular monitoring well was derived from pre-modern and/or modern sources. More specifically, the analyses can be used to determine whether the recharge age of the groundwater beneath the site pre-dates anthropogenic activities at the site.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ambient Mass Spectrometry Imaging Using Direct Liquid Extraction Techniques

Mass spectrometry imaging (MSI) is a powerful analytical technique that enables label-free spatial localization and identification of molecules in complex samples.1-4 MSI applications range from forensics5 to clinical research6 and from understanding microbial communication7-8 to imaging biomolecules in tissues.1, 9-10 Recently, MSI protocols have been reviewed.11 Ambient ionization techniques enable direct analysis of complex samples under atmospheric pressure without special sample pretreatment.3, 12-16 In fact, in ambient ionization mass spectrometry, sample processing (e.g., extraction, dilution, preconcentration, or desorption) occurs during the analysis.17 This substantially speeds up analysis and eliminates any possible effects of sample preparation on the localization of molecules in the sample.3, 8, 12-14, 18-20 Venter and co-workers have classified ambient ionization techniques into three major categories based on the sample processing steps involved: 1) liquid extraction techniques, in which analyte molecules are removed from the sample and extracted into a solvent prior to ionization; 2) desorption techniques capable of generating free ions directly from substrates; and 3) desorption techniques that produce larger particles subsequently captured by an electrospray plume and ionized.17 This review focuses on localized analysis and ambient imaging of complex samples using a subset of ambient ionization methods broadly defined as “liquid extraction techniques” based on the classification introduced by Venter and co-workers.17 Specifically, we include techniques where analyte molecules are desorbed from solid or liquid samples using charged droplet bombardment, liquid extraction, physisorption, chemisorption, mechanical force, laser ablation, or laser capture microdissection. Analyte extraction is followed by soft ionization that generates ions corresponding to intact species. Some of the key advantages of liquid extraction techniques include the ease of operation, ability to analyze samples in their native environments, speed of analysis, and ability to tune the extraction solvent composition to a problem at hand. For example, solvent composition may be optimized for efficient extraction of different classes of analytes from the sample or for quantification or online derivatization through reactive analysis. In this review, we will: 1) introduce individual liquid extraction techniques capable of localized analysis and imaging, 2) describe approaches for quantitative MSI experiments free of matrix effects, 3) discuss advantages of reactive analysis for MSI experiments, and 4) highlight selected applications (published between 2012 and 2015) that focus on imaging and spatial profiling of molecules in complex biological and environmental samples.

Environmental Molecular Sciences Laboratory↗

SPRUCE Porewater Chemistry Data for Experimental Plots, Beginning in 2013, Version 4

This data set includes the chemistry of porewater in the SPRUCE experiment plots located in the S1 bog of the USDA Forest Service Marcell Experimental Forest (MEF) in northern Minnesota, 40 km north of Grand Rapids. Data are presented from June 2013 through September 2020 (2013-06-28 to 2020-09-28). Data will continue to be collected until 2025 and will be appended to this dataset periodically. These data are the pre- and post-treatment data from the warming and elevated carbon dioxide (CO2) treatments associated with the SPRUCE experiment. There are 10 experimental plots in SPRUCE: 5 temperature treatments (+0, +2.25, +4.5, +6.75, +9°C) at ambient CO2, and the same 5 temperature treatments at elevated CO2 (+500 ppm). There are 7 additional ambient plots without experimental enclosures, and thus a total of 17 plots. Water samples were analyzed for pH, specific conductivity, nutrient concentrations (ammonium, nitrate, soluble reactive phosphorus, total nitrogen, total phosphorus), cation concentrations (calcium, potassium, magnesium, sodium, aluminum, iron, manganese, silicon, strontium), anion concentrations (chloride, sulfate), and TOC concentrations. Subsets of the samples were analyzed for natural-abundance stable isotopes of water (δ18O-H2O and δD-H2O) and THg and MeHg concentrations. User note: Results will be added to this data set and released to the public periodically as quality assurance and publication of results are accomplished. This June 2024 release (Version 4) is an updated and expanded version that supersedes and replaces the previous release. See the Data Release History table below for additional release notes.

54 ENVIRONMENTAL SCIENCES↗

Advanced Curation Activities at NASA: Preparation for Upcoming Missions

The responsibility for curating NASA's astromaterials collections falls to the NASA Curation Office at Johnson Space Center. Under the governing document, NASA Policy Directive (NPD) 7100.10F and derivative requirements documents, JSC is charged with curation of all extraterrestrial material under NASA control, including future NASA missions to include material returned in Mars Sample Return (MSR) efforts, OSIRIS-REx, NASA's subset of Hayabusa-2 samples, and any other sample return missions. The Directive defines Curation as activities including documentation, preservation, sample preparation, distribution, and tracking of samples for research, education, and public outreach. In this abstract we will describe Curation's research and development efforts to improve the care of existing collections and prepare for future NASA sample return missions. These efforts are collectively referred to as Advanced Curation, a term first coined in 2002.

Fries, M. D.↗

The ANGSA Program: A Low-cost Lunar "Sample Return Mission". An Overview and Progress over the Last 18 Months

The Apollo Program returned 381 kg of samples. Analyses of these samples have provided fundamental insights into the origin and history of the Earth-Moon system and how planets and even solar systems work. These samples have provided ground truth for every post-Apollo mission to the Moon for the interpretation of remotely sensed data. After 50 years of analysis and study, our sophistication for handling and examining samples has greatly increased. Some special samples that were collected or preserved in unique containers or environments remain unexamined by standard or advanced analytical approaches. The Apollo Next Generation Sample Analysis (ANGSA) Program was designed to examine a subset of these special samples. The ANGSA consortium consists of 9 original teams funded by NASA that have combined into a single science team referred to as the ANGSA Science Team. The program was designed to function as the sample analysis portion of a sample return mission with processing, preliminary examination, and analyses utilizing new and improved technologies and recent mission observations. The ANGSA Program links the first generation of lunar explorers (Apollo) with future explorers of the Moon (Artemis). The purpose of this abstract is to highlight the ANGSA samples, science and engineering goals, and progress made so far. Related abstracts and talks will focus on the links between Apollo and Artemis, geologic context, and initial examination, processing, and results.

F M McCubbin↗

Bright metal-poor stars from the Hamburg/ESO survey. II. A chemodynamical analysis

We obtain estimates of stellar atmospheric parameters for a previously published sample of 1777 relatively bright (9<B<14) metal-poor candidates from the Hamburg/ESO Survey. The original Frebel et al. analysis of these stars was able to derive estimates of [Fe/H] and [C/Fe] only for a subset of the sample, due to limitations in the methodology then available. A new spectroscopic analysis pipeline has been used to obtain estimates of T{sub eff}, log g, [Fe/H], and [C/Fe] for almost the entire data set. This sample is very local—about 90% of the stars are located within 0.5 kpc of the Sun. We consider the chemodynamical properties of these stars in concert with a similarly local sample of stars from a recent analysis of the Bidelman and MacConnell “weak metal” candidates by Beers et al. We use this combined sample to identify possible members of the halo stream of stars suggested by Helmi et al. and Chiba and Beers, as well as stars that may be associated with stripped debris from the putative parent dwarf of the globular cluster Omega Centauri, suggested to exist by previous authors. We identify a clear increase in the cumulative frequency of carbon-enhanced metal-poor (CEMP) stars with declining metallicity, as well as an increase in the fraction of CEMP stars with distance from the Galactic plane, consistent with previous results. We also identify a relatively large number of CEMP stars with kinematics consistent with the metal-weak thick-disk population, with possible implications for its origin.

79 ASTRONOMY AND ASTROPHYSICS↗

SPRUCE Outflow Chemistry Data for Experimental Plots Beginning in 2016

This data set includes the chemistry of outflow waters in the SPRUCE experiment plots located in the S1 bog of the USDA Forest Service Marcell Experimental Forest (MEF) in northern Minnesota, 40 km north of Grand Rapids. These data are post-treatment data from the warming and elevated carbon dioxide (CO2) treatments associated with the SPRUCE experiment. There are ten experimental plots in SPRUCE: five temperature treatments (+0, +2.25, +4.5, +6.75, +9°C) at ambient CO2, and the same five temperature treatments at elevated CO2 (+500 ppm). Sample collection and analyses started in March of 2016 and will continue for the duration of the experiment. Samples were analyzed for pH, specific conductivity, anion concentrations (chloride, sulfate), cation concentrations (calcium, potassium, magnesium, sodium, aluminum, iron, manganese, silicon, strontium), nutrient concentrations (ammonium, nitrate, soluble reactive phosphorus, total nitrogen, total phosphorus), and total organic carbon (TOC) concentrations. Subsets of the samples have been analyzed for natural-abundance stable isotopes of water (δ18O-H2O and δD-H2O), dissolved carbon dioxide (δ13C-CO2), and dissolved methane (δ13C-CH4), and concentrations of total mercury (Thg), methylmercury (MeHg), ferrous iron (Fe2+), ferric iron (Fe3+), dissolved inorganic carbon (DIC), and dissolved methane (CH4).

54 ENVIRONMENTAL SCIENCES↗

THE STELLAR-ACTIVITY-ROTATION RELATIONSHIP AND THE EVOLUTION OF STELLAR DYNAMOS

We present a sample of 824 solar and late-type stars with X-ray luminosities and rotation periods. This is used to study the relationship between rotation and stellar activity and derive a new estimate of the convective turnover time. From an unbiased subset of this sample the power-law slope of the unsaturated regime, L{sub X} /L{sub bol}{proportional_to}Ro{sup {beta}}, is fit as {beta} = -2.70 {+-} 0.13. This is inconsistent with the canonical {beta} = -2 slope to a confidence of 5{sigma}, and argues for an additional term in the dynamo number equation. From a simple scaling analysis this implies {Delta}{Omega}/{Omega}{proportional_to}{Omega}{sup 0.7}, i.e., the differential rotation of solar-type stars gradually declines as they spin down. Supersaturation is observed for the fastest rotators in our sample and its parametric dependencies are explored. Significant correlations are found with both the corotation radius and the excess polar updraft, the latter theory providing a stronger dependence and being supported by other observations. We estimate mass-dependent empirical thresholds for saturation and supersaturation and map out three regimes of coronal emission. Late F-type stars are shown never to pass through the saturated regime, passing straight from supersaturated to unsaturated X-ray emission. The theoretical threshold for coronal stripping is shown to be significantly different from the empirical saturation threshold (Ro < 0.13), suggesting it is not responsible. Instead we suggest that a different dynamo configuration is at work in stars with saturated coronal emission. This is supported by a correlation between the empirical saturation threshold and the time when stars transition between convective and interface sequences in rotational spin-down models.

79 ASTRONOMY AND ASTROPHYSICS↗

Laboratory time series moisture manipulative experiment from sediment across San Antonio, Texas: time series aerobic respiration and geochemistry

This dataset supports a broader study examining the effects of wetting and drying on hyporheic zone respiration. The dataset provides data generated from a laboratory moisture manipulation experiment. The contents include time series aerobic respiration and moisture; dissolved oxygen; sediment geochemistry data; and field metadata (including qualitative information on instream and river corridor characteristics). Samples were collected as part of the WHONDRS Allison Veach collaboration (AV1). The data package associated with the AV1 study is available at https://data.ess-dive.lbl.gov/datasets/doi:10.15485/2529428. AV1 sampling occurred across 7 perennial and 7 intermittent streams in San Antonio, Texas. Each stream/site was visited both in summer during base flow (July-September 2023) and winter during peak flow (January-February 2024). This study uses subsamples from a subset of AV1 samples. The original field samples were labeled as AV1_###. Subsequent subsamples for this study were labeled as EV_###. The labels from the field samples and the EV subsamples can be mapped directly based on the digits following the prefix and underscore (i.e., EV_001 is a subsample from AV1_001). See the critical details section below for more details on sample naming. For details on how to navigate data packages generated by this project, see https://data.ess-dive.lbl.gov/portals/PNNLRiverCorridorSFA/About. This dataset is comprised of one main data folder containing (1) file-level metadata; (2) data dictionary; (3) field metadata; (4) readme; (5) field protocol; and a (6) a subfolder with sediment sample data from the incubation experiment. The sample data subfolder contains (1) effect size; (2) iron (II); (3) gravimetric moisture; (4) respiration rates; (5) raw dissolved oxygen values and plots; (6) specific conductance; (7) pH; (8) temperature; (9) a summary containing mean, median, and standard deviation values of each data type for each treatment (wet and dry); and (10) methods codes. All files are .csv or.pdf.

54 ENVIRONMENTAL SCIENCES↗

A NEW ORIENTATION INDICATOR FOR RADIO-QUIET QUASARS

The velocities of the [O III] {lambda}5007 and optical Fe II emission lines, measured relative to the systemic redshifts of 2265 QSOs by Hu et al., show the signature of a disklike BLR structure with polar outflows. Objects with large [O III] outflows show no Fe II offset velocity and are seen pole-on. Objects with large Fe II inflow show no [O III] offset velocity and are seen edge-on. This interpretation is supported by the morphology of the radio-loud objects within the sample and by previous determinations of the geometry of the broad- and narrow-line regions. Analysis of the objects with neither Fe II or [O III] velocity offsets, however, shows that the two groups also differ in Eddington ratio (ER), and, within this subset, corresponding groups with high and low ER but with the opposite orientation can be identified. Using these four subsets of the sample, the effects of orientation and ER can be separated, and, in some cases, quantified. The changes in apparent continuum luminosity and broad H{beta} width and strength suggest a model in which both continuum and H{beta} are emitted from the surface of the disk, which is less flattened in high ER objects. The effects of orientation on the derived properties, black hole mass and ER, are significant, though not large. The [O III] outflow appears to influence the width of that line, as well as its centroid.

79 ASTRONOMY AND ASTROPHYSICS↗

Leaf structural and chemical traits, and BNL field campaign sample details, San Lorenzo, Panama, 2020

This data package includes leaf traits, canopy traits and sample details for leaves from 71 species sampled from the San Lorenzo forest canopy crane site, Panama (PA-SLZ) during the BNL field campaign in January to March 2020. Each leaf sample is described with species, phenological stage and location within vertical canopy profiles. Leaf area index (LAI) and height is presented for each canopy profile location. Leaf mass per area (LMA), leaf water content (LWC) and leaf carbon and nitrogen content are included for a subset of the samples. This data package includes sample details, processed data for leaf traits and LAI (*.csv), LAI raw data (compressed as *.zip) and digital camera images (*.jpg, compressed as *.zip) of the leaf samples. Metadata files include data descriptions (_dd.csv) for tabular data, a list of all species sampled during the campaign (*.csv) and a detailed description of the field campaign protocol and methods (*.pdf). See related datasets for leaf gas exchange, leaf water potential and leaf spectral measurements made on the samples described here.

54 ENVIRONMENTAL SCIENCES↗