Search NASA⌕ Search

SEARCH · Search NASA

Results for “supported electrocatalysts”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Size-Dependent Adsorption and Adhesion Energetics of Ag Nanoparticles on Graphene Films on Ni(111) by Calorimetry

Interest in the use of carbon supports for late transition metal nanoparticle catalysts has expanded rapidly due to the increasing importance of electrocatalysts for clean energy and environmental technologies and the use and storage of renewable electricity. Compared to oxide supports, almost nothing is known about the effect of metal nanoparticle size on the energies of the metal atoms within carbon-supported nanoparticles, yet these energies are crucial for understanding their surface reactivity and sintering kinetics. Here, the growth morphology and adsorption energetics of vapor-deposited Ag onto clean graphene/Ni(111) surfaces have been studied using a combination of single-crystal adsorption calorimetry (SCAC) and He + low-energy ion scattering (LEIS). The differential heat of Ag adsorption is 207 kJ/mol for making ~30 atom Ag particles on graphene terraces at 100 K and 16 kJ/mol higher for making ~9 atom Ag clusters at defect sites at the same temperature. The heat of adsorption increases rapidly with Ag coverage as 3D Ag nanoparticles nucleate and grow in size, asymptotically reaching within 5 kJ/mol of the bulk Ag sublimation enthalpy (285 kJ/mol) by 2 ML. The heats of adsorption and Ag nanoparticle densities from LEIS (~10 16 /m 2 ) were combined to provide the Ag/graphene adhesion energy (E adh = 1.8 J/m 2 in the large-particle limit) and the Ag chemical potential (μ) versus effective particle diameter (D). The Ag chemical potential was well-fitted by μ(D) = (3γ v /M – E adh )(1 + (1.5 nm)/D)(2V m /D), where γ v /M is the surface energy of bulk Ag and V m is its molar volume. The same equation is known to fit similar data for late transition metals on clean surfaces of metal oxide single crystals. The adhesion energy of Ag measured here on graphene falls within the wide range measured for Ag on those oxide surfaces and is almost as large as on the oxide that binds Ag particles most strongly, namely CeO 2 (111), which is well-known to be very effective at resisting catalyst deactivation by metal sintering. Furthermore, these results imply that carbon supports will be effective at resisting sintering and that Ag particles smaller than 6 nm on graphene will bind small adsorbed reaction intermediates more weakly than supports with weaker adhesion to Ag, like MgO(100).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Alkaline Ethanol Oxidation Reaction on Carbon Supported Ternary PdNiBi Nanocatalyst using Modified Instant Reduction Synthesis Method

Direct ethanol fuel cells (DEFC) still lack active and efficient electrocatalysts for the alkaline ethanol oxidation reaction (EOR). In this work, a new instant reduction synthesis method was developed to prepare carbon supported ternary PdNiBi nanocatalysts with improved EOR activity. Synthesized catalysts were characterized with a variety of structural and compositional analysis techniques in order to correlate their morphology and surface chemistry with electrochemical performance. The modified instant reduction synthesis results in well-dispersed, spherical Pd85Ni10Bi5 nanoparticles on Vulcan XC72R support (Pd85Ni10Bi5/C(II-III)), with sizes ranging from 3.7 +/- 0.8 to 4.7 +/- 0.7 nm. On the other hand, the common instant reduction synthesis method leads to significantly agglomerated nanoparticles (Pd85Ni10Bi5/C-(I)). EOR activity and stability of these three different carbon supported PdNiBi anode catalysts with a nominal atomic ratio of 85:10:5 were probed via cyclic voltammetry and chronoamperometry using the rotating disk electrode method. Pd85Ni10Bi5/C-(II) showed the highest electrocatalytic activity (150 mA.cm(-2); 2678 mA.mg(-1)) with low onset potential (0.207 V) for EOR in alkaline medium, as compared to a commercial Pd/C and to the other synthesized ternary nanocatalysts Pd85Ni10Bi5/C-(I) and Pd85Ni10Bi5/C-(III). This new synthesis approach provides a new avenue to developing efficient, carbon supported ternary nanocatalysts for future energy conversion devices. The modified instant reduction method for synthesis of ternary Pd85Ni10Bi5/C-(II) nanocatalyst using Vulcan XC72R as carbon support initiates an agglomeration reduction, provides low average particle size, and enables enhanced activity for the alkaline ethanol oxidation reaction (EOR) compared to the common instant reduction method and to a commercial Pd/C catalyst.

Alkaline direct ethanol fuel cell↗
DOE OSTI2025

Adjusting the Criteria for Hydrogen Evolution by Single-Atom Catalysts

Downsizing noble metal catalysts is essential for improving atomic efficiency in sustainable energy applications. Typically, strategies focus on anchoring atomically scaled catalysts onto heteroatom-rich substrates, but these interactions can unintentionally alter the electronic structure of the catalyst, complicating the hydrogen evolution reaction (HER) mechanism. This study focuses on elucidating the interfacial mechanism of HER using structurally well-defined platinum single-atom (Pt SA) electrocatalysts. Unlike chemically reduced SAs, electrochemically deposited Pt SA catalysts do not rely on strong support interactions. As a result, these isolated Pt atoms can potentially achieve the theoretical maximum hydrogen production efficiency. This work introduces electrocatalysts composed solely of true SA sites, clarifying previous ambiguities surrounding the concept of SA electrocatalysis.

adsorption↗
DOE OSTI2022

Rationally designed negative electrode for selective CO 2 -to-CO conversion in protonic ceramic electrochemical cells

Protonic ceramic electrochemical cells (PCECs) are solid-state electrochemical devices that employ proton-conducting oxides as electrolytes, which offer a promising approach for electrification of chemical manufacturing, including CO 2 reduction to produce value-added chemicals (e.g., CO). The primary advantage of PCECs is their intermediate operating temperatures (300–600 °C), which thermodynamically and kinetically favor the CO 2 reduction chemistry at the negative electrode. However, the conventional negative electrodes of PCECs, such as BaZr 0.8–x Ce x Y 0.2 O 3-δ -Ni or BaZr 0.8–x Ce x Y 0.1 Yb 0.1 O 3-δ -Ni, cannot reduce CO 2 to either CH 4 or CO with a selectivity of >99 %, leading to the production of a CO and CH 4 mixture. Herein, an oxide-supported in-situ exsolved Ni-Fe alloyed nanoparticle electrocatalyst, Sr 2 Fe 1.4 Mo 0.5 O 6-δ -Ni0.175 (SFM-Ni0.175), is first employed as the negative electrode of PCECs. The PCECs equipped with this new negative electrode selectively favor the CO 2 -to-CO conversion. A selectivity of ~100 % toward CO has been demonstrated over a wide range of operating temperatures (400–600 °C) and applied potentials/current densities. The negative electrode demonstrated in this work fully suppresses the CH 4 production. In situ diffuse reflectance infrared spectroscopy (DRIFTS) was performed to probe the CO 2 reduction mechanisms over both SFM-Ni0.175 and the traditional negative electrode (BCZYYb7111 +Ni), which indicates SFM-Ni0.175 inhibits the formation of formate species, leading to selective production of CO. Finally, this work validates that PCECs equipped with the rationally designed negative electrode can selectively manufacture chemicals.

25 ENERGY STORAGE↗
DOE OSTI2025

Operando Characterization of Fe in Doped Ni x (Fe 1– x )O y H z Catalysts for Electrochemical Oxygen Evolution

Iron-doped nickel oxyhydroxides, Ni x (Fe 1– x )O y H z , are among the most promising oxygen evolution reaction (OER) electrocatalysts in alkaline environments. Although iron (Fe) significantly enhances the catalytic activity, there is still no clear consensus on whether Fe directly participates in the reaction or merely acts as a promoter. To elucidate the Fe’s role, we performed operando X-ray spectroscopy studies supported by DFT on Ni x (Fe 1– x )O y H z electrocatalysts. We probed the reversible changes in the structure and electronic character of Ni x (Fe 1– x )O y H z as the electrode potential is cycled between the resting (here at 1.10 V RHE ) and operational states (1.66 V RHE ). DFT calculations and XAS simulations on a library of Fe structures in various NiO y H z environments are in favor of a distorted local octahedral Fe(III)O 3 (OH) 3 configuration at the resting state with the NiO y H z scaffold going from α-Ni(OH) 2 to γ-NiOOH as the potential is increased. Under catalytic conditions, EXAFS and HERFD spectra reveal changes in p-d mixing (covalency) relative to the resting state between O/OH ligands and Fe leading to a shift from octahedral to square pyramidal coordination at the Fe site. XES measurements and theoretical simulations further support that the Fe equilibrium structure remains in a formal Fe(III) state under both resting and operational conditions. These spectral changes are attributed to potential dependent structural rearrangements around Fe. The results suggest that ligand dissociation leads to the C 4v symmetry as the most stable intermediate of the Fe during OER. This implies that Fe has a weakly coordinated or easily dissociable ligand that could serve to coordinate the O–O bond formation and, tentatively, play an active role in the Ni x (Fe 1– x )O y H z electrocatalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Rapid Synthesis of Carbon‐Supported Ru‐RuO₂ Heterostructures for Efficient Electrochemical Water Splitting

Abstract Development of high‐performance electrocatalysts for water splitting is crucial for a sustainable hydrogen economy. In this study, rapid heating of ruthenium(III) acetylacetonate by magnetic induction heating (MIH) leads to the one‐step production of Ru‐RuO₂/C nanocomposites composed of closely integrated Ru and RuO₂ nanoparticles. The formation of Mott‐Schottky heterojunctions significantly enhances charge transfer across the Ru‐RuO 2 interface leading to remarkable electrocatalytic activities toward both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in 1 m KOH. Among the series, the sample prepares at 300 A for 10 s exhibits the best performance, with an overpotential of only −31 mV for HER and +240 mV for OER to reach the current density of 10 mA cm⁻ 2 . Additionally, the catalyst demonstrates excellent durability, with minimal impacts of electrolyte salinity. With the sample as the bifunctional catalysts for overall water splitting, an ultralow cell voltage of 1.43 V is needed to reach 10 mA cm⁻ 2 , 160 mV lower than that with a commercial 20% Pt/C and RuO₂/C mixture. These results highlight the significant potential of MIH in the ultrafast synthesis of high‐performance catalysts for electrochemical water splitting and sustainable hydrogen production from seawater.

Pan, Dingjie [Department of Chemistry and Biochemi↗
DOE OSTI2022

Fe–N–C Boosts the Stability of Supported Platinum Nanoparticles for Fuel Cells

The poor durability of Pt-based nanoparticles dispersed on carbon black is the challenge for the application of long-life polymer electrolyte fuel cells. Recent work suggests that Fe- and N-codoped carbon (Fe-N-C) might be a better support than conventional high-surface-area carbon. In this work, we find that the electrochemical surface area retention of Pt/Fe-N-C is much better than that of commercial Pt/C during potential cycling in both acidic and basic media. In situ inductively coupled plasma mass spectrometry studies indicate that the Pt dissolution rate of Pt/Fe-N-C is 3 times smaller than that of Pt/C during cycling. Density functional theory calculations further illustrate that the Fe-N-C substrate can provide strong and stable support to the Pt nanoparticles and alleviate the oxide formation by adjusting the electronic structure. The strong metal-substrate interaction, together with a lower metal dissolution rate and highly stable support, may be the reason for the significantly enhanced stability of Pt/Fe-N-C. In conclusion, this finding highlights the importance of carbon support selection to achieve a more durable Pt-based electrocatalyst for fuel cells.

25 ENERGY STORAGE↗
DOE OSTI2021

Electrocatalytic nitrate reduction on rhodium sulfide compared to Pt and Rh in the presence of chloride

Chloride poisoning is a serious problem for the electrocatalytic reduction of aqueous nitrate (NO 3 – ) and improved electrocatalysts are needed. Here we study the electrocatalytic activity of rhodium sulfide supported on carbon (Rh x S y /C) for the reduction of nitrate and compare it against Pt/C and Rh/C in the presence of chloride. Between 0.05–0.15 V vs. RHE, Rh x S y /C has a steady-state nitrate reduction current density in 1 M H 2 SO 4 + 1 M NaNO 3 that is 1.6–5.6 times greater than Rh/C (the most active metal electrocatalyst) and 10–24 times greater than Pt/C. Current densities are decreased by 37% for Rh x S y /C, 62% for Rh/C, and 40% for Pt/C at 0.1 V vs. RHE in the presence of 1 mM chloride. The decrease in nitrate reduction activity for Pt, Rh, and Rh x S y is due to the competitive adsorption of chloride and nitrate on the surface. Density functional theory (DFT) modeling predicts that chloride poisoning will persistently inhibit nitrate reduction on metals due to linear adsorbate scaling relations between nitrate and chloride. DFT calculations and microkinetic modeling of our experimental measurements predict that nitrate converts to nitrite via an H-assisted dissociation mechanism on Pt and direct nitrate dissociation on Rh and Rh x S y . Pristine Rh x S y (i.e., Rh 3 S 4 , Rh 2 S 3 , and Rh 17 S 15 ) terraces are predicted to be inactive toward nitrate reduction. In contrast, sulfur vacancies in Rh 3 S 4 terraces are predicted to be active for nitrate reduction, but also bind chloride strongly. Furthermore, sulfur-defected Rh 3 S 4 rationalize the experimentally observed high activity but moderate chloride poison-resistance of Rh x S y /C for nitrate reduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Ni(OH) 2 -free NiCu as a hydrogen evolution and oxidation electrocatalyst

In this work, we investigate the role of the nickel surface oxidation and the use of additional reducing agent in the synthesis process in the electrochemical activity of NiCu electrocatalysts for hydrogen oxidation reaction and hydrogen evolution reaction. In addition, the role of the carbon support morphology is also investigated: two different supports, DENKA black and Ketjenblack with widely different properties (specific surface, proportion of low strain carbons, etc.) are studied, and no difference are observed in their electrochemical activity. However, the use 4-aminoantipyrine as a reducing agent resulted in a dramatic increase in non-oxidized Ni at the electrocatalyst’ surface, concomitant to a large increase in its activity for both the hydrogen evolution and oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Semiconductor‐Electrocatalyst Contacts: Theory, Experiment, and Applications to Solar Water Photoelectrolysis

The goal of the work supported by this program was to use new types of photoelectrochemical experiments, supported by simulation and theory, to develop an improved microscopic picture of electron transfer in combined semiconductor|catalyst|solution (sem|cat|sol) systems. An emphasis was placed on developing techniques which can directly characterize electronic interfacial phenomena without first assuming a junction model. We then aimed to illustrate the design principles that enhance interfacial processes and enable high-efficiency devices. Our work thus provides deep insight into the processes that, in general, use light to drive chemical reactions.

14 SOLAR ENERGY↗
DOE OSTI2025

Optimization of Ag Electrocatalyst Performance for CO2 to CO Conversion: Pairing Atomic Simulations with Experiments

Density-functional theory- based calculations that complement our series of experimental efforts on optimizing Ag electrocatalyst performance for CO2 to CO conversion were presented. Three key findings are drawn out from the combined UHV surface science, STM and electrochemical measurements: (1) Using a series of Ag nanoparticles with 2-6 nm average diameters, CO2 reduction reaction (CO2RR) activity increases, with particle between 2 nm and ∼4 nm demonstrating the highest combination of activity and selectivity; (2) Electronic metal−support interactions (EMSIs) between Ag and C dramatically improve CO2RR performance as evidenced by a scaling relationship between particle size and the relative Ag−C EMSIs strength, which improves the CO2-to-CO Faradaic efficiency of sub-2 nm Ag particles from 2 to ∼100% and increases the CO turnover frequency ∼15-fold compared with similarly sized bare Ag particles; (3) The performance Ag electrocatalysts is improved when supported on S-doped C materials. Computational modeling of 1−10 nm Ag particles predicts a nearly identical size-dependent trend with maximum CO2RR activity predicted for 3.7nm particles. The calculations support the promotional effect of C materials, showing a large charge transfer of 1.02 e from Ag clusters to defective C and a 0.41 eV less endergonic step of forming COOH intermediate on Ag/defective-C compared to the Ag/C system. Calculations indicate a more favorable energetic pathway of CO2-to-CO at the C-S-Ag interface, consistent with experiments.

CO2 utilization↗
DOE OSTI2023

A multifunctional copper single-atom electrocatalyst aerogel for smart sensing and producing ammonia from nitrate

Despite modern chemistry’s success in providing affordable fertilizers for feeding the population and supporting the ammonia industry, ineffective nitrogen management has led to pollution of water resources and air, contributing to climate change. Here, we report a multifunctional copper single-atom electrocatalyst-based aerogel (Cu SAA) that integrates the multiscale structure of coordinated single-atomic sites and 3D channel frameworks. The Cu SAA demonstrates an impressive faradaic efficiency of 87% for NH 3 synthesis, as well as remarkable sensing performance with detection limits of 0.15 ppm for NO 3 − and 1.19 ppm for NH 4 + . These multifunctional features enable precise control and conversion of nitrate to ammonia in the catalytic process, facilitating accurate regulation of the ammonium and nitrate ratios in fertilizers. We thus designed the Cu SAA into a smart and sustainable fertilizing system (SSFS), a prototype device for on-site automatic recycling of nutrients with precisely controlled nitrate/ammonium concentrations. The SSFS represents a forward step toward sustainable nutrient/waste recycling, thus permitting efficient nitrogen utilization of crops and mitigating pollutant emissions. This contribution exemplifies how electrocatalysis and nanotechnology can be potentially leveraged to enable sustainable agriculture.

Science & Technology - Other Topics↗
DOE OSTI2023

Hierarchically Porous Carbons with Highly Curved Surfaces for Hosting Single Metal FeN 4 Sites as Outstanding Oxygen Reduction Catalysts

Iron–nitrogen–carbon (Fe₋N₋C) materials have emerged as a promising alternative to platinum-group metals for catalyzing the oxygen reduction reaction (ORR) in proton-exchange-membrane fuel cells. However, their low intrinsic activity and stability are major impediments. Herein, an Fe₋N–C electrocatalyst with dense FeN 4 sites on hierarchically porous carbons with highly curved surfaces (denoted as FeN 4 - hc C) is reported. The FeN 4 - hc C catalyst displays exceptional ORR activity in acidic media, with a high half-wave potential of 0.85 V (versus reversible hydrogen electrode) in 0.5 m H 2 SO 4 . When integrated into a membrane electrode assembly, the corresponding cathode displays a high maximum peak power density of 0.592 W cm -2 and demonstrates operating durability over 30 000 cycles under harsh H 2 /air conditions, outperforming previously reported Fe–N₋C electrocatalysts. These experimental and theoretical studies suggest that the curved carbon support fine-tunes the local coordination environment, lowers the energies of the Fe d-band centers, and inhibits the adsorption of oxygenated species, which can enhance the ORR activity and stability. This work provides new insight into the carbon nanostructure–activity correlation for ORR catalysis. It also offers a new approach to designing advanced single-metal-site catalysts for energy-conversion applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Low-Energy Ion Scattering Intensities from Supported Nanoparticles: The Spherical Cap Model

Supported nanoparticles are of great importance to many technologies like fuel processing and chemical synthesis using catalysts and electrocatalysts, energy storage and generation using fuel cells and batteries, electrochemistry, magnetic information storage, and more. Low-energy ion scattering spectroscopy (LEIS) with noble gas ions like He+ is a powerful tool for the characterization of nanoparticles dispersed across flat support surfaces due to its ability to probe the elemental composition in the topmost atomic layer of a surface, providing quantitative information regarding the size and number density of nanoparticles. In this work, we present a derivation of the LEIS intensities expected from nanoparticles and the support material as a function of the average particle size, their number per unit area, and their contact angle with the support when modeled as spherical caps of the nanoparticle material dispersed over the surface of a flat support. The model assumes that the ion intensities are determined only by the physical blocking of linear ion trajectories and independent of the tilt angle of the local surface relative to the incident and scattered ion directions, an assumption we support by quantitative modeling of published data which tested tilt-angle effects. The model is a generalization to arbitrary contact angles of the hemispherical cap model, which assumes 90° contact angle and has been widely used to model spectroscopic signals in LEIS (and also in Auger and photoelectron spectroscopies) during nanoparticle growth. Here, this new model quantitatively reveals how LEIS signals are sensitive not only to the diameter and number density of the nanoparticle but also to their contact angle (or height/diameter ratio). With the use of additional data (e.g., from microscopy or adsorption microcalorimetry), the model presented here will enable more accurate determination of the average size, shape, and number density of supported nanoparticles based on LEIS intensity measurements.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2021

Understanding Degradation Mechanisms in SrIrO 3 Oxygen Evolution Electrocatalysts: Chemical and Structural Microscopy at the Nanoscale

Designing acid-stable oxygen evolution reaction electrocatalysts is key to developing sustainable energy technologies such as polymer electrolyte membrane electrolyzers but has proven challenging due to the high applied anodic potentials and corrosive electrolyte. This work showcases advanced nanoscale microscopy techniques supported by complementary structural and chemical characterization to develop a fundamental understanding of stability in promising SrIrO 3 thin film electrocatalyst materials. Cross-sectional high-resolution transmission electron microscopy illustrates atomic-scale bulk and surface structure, while secondary ion mass spectrometry imaging using a helium ion microscope provides the nanoscale lateral elemental distribution at the surface. After accelerated degradation tests under anodic potential, the SrIrO 3 film thins and roughens, but the lateral distribution of Sr and Ir remains homogeneous. A layer-wise dissolution mechanism is hypothesized, wherein anodic potential causes the IrO x -rich surface to dissolve and be regenerated by Sr leaching. Finally, the characterization approaches utilized herein and mechanistic insights into SrIrO 3 are translatable to a wide range of catalyst systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Ultrafast Preparation of Nonequilibrium FeNi Spinels by Magnetic Induction Heating for Unprecedented Oxygen Evolution Electrocatalysis

Carbon-supported nanocomposites are attracting particular attention as high-performance, low-cost electrocatalysts for electrochemical water splitting. These are mostly prepared by pyrolysis and hydrothermal procedures that are time-consuming (from hours to days) and typically difficult to produce a nonequilibrium phase. Herein, for the first time ever, we exploit magnetic induction heating-quenching for ultrafast production of carbon-FeNi spinel oxide nanocomposites (within seconds), which exhibit an unprecedentedly high performance towards oxygen evolution reaction (OER), with an ultralow overpotential of only +260 mV to reach the high current density of 100 mA cm -2 . Experimental and theoretical studies show that the rapid heating and quenching process (ca. 10 3 K s -1 ) impedes the Ni and Fe phase segregation and produces a Cl-rich surface, both contributing to the remarkable catalytic activity. Results from this study highlight the unique advantage of ultrafast heating/quenching in the structural engineering of functional nanocomposites to achieve high electrocatalytic performance towards important electrochemical reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗