Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface emissivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Thermal design improvements for 30kWe arcjet engine

Two thermal design improvements for 30 kWe arcjet engines are described. A ZrB2 high temperature coating was used to increase the surface emissivity of the nozzle radiating surface, enabling lower temperature operation, which should lead to longer nozzle life. The ZrB2-coated engine operated 120 C cooler than the uncoated baseline engine indicating a 30 percent increase in the surface emissivity. An engine design which has fewer active seals than previous designs and operates at lower overall component temperatures is described. The nozzle on the engine operated at 1950 C at 30 kWe while the baseline engine nozzle reached 2000 C at 23 kWe. The back of the engine was more than a factor of two cooler when compared to the baseline engine.

Deininger, William D.↗
NASA NTRS1988

Thermal design improvements for 30kWe arcjet engines

This paper describes two thermal design improvements for 30 kWe arcjet engines. A ZrB2 high temperature coating was used to increase the surface emissivity of the nozzle radiating surface, enabling lower temperature operation, which should lead to longer nozzle life. The ZrB2-coated engine operated about 120 C cooler than the uncoated baseline engine indicating a 30 percent increase in the surface emissivity. Additionally, a new engine design which has fewer active seals than previous designs and operates at lower overall component temperatures is described in detail. The nozzle on the new engine operated at a temperature of 1950 C at 30 kWe while the baseline engine nozzle reached 2000 C at 23 kWe. In addition, the back of the new engine was more than a factor of two cooler when compared to the baseline engine.

Deininger, W. D.↗
NASA NTRS2017

An Intercomparative Study of the Effects of Aircraft Emissions on Surface Air Quality

This study intercompares, among five global models, the potential impacts of all commercial aircraft emissions worldwide on surface ozone and particulate matter (PM (sub 2.5)). The models include climate-response models (CRMs) with interactive meteorology, chemical-transport models (CTMs) with prescribed meteorology, and models that integrate aspects of both. Model inputs are harmonized in an effort to achieve a consensus about the state of understanding of impacts of 2006 commercial aviation emissions. Models find that aircraft increase near-surface ozone (0.3 to 1.9 percent globally), with qualitatively similar spatial distributions, highest in the Northern Hemisphere. Annual changes in surface-level PM (sub 2.5) in the CTMs (0.14 to 0.4 percent) and CRMs (-1.9 to 1.2 percent) depend on differences in nonaircraft baseline aerosol fields among models and the inclusion of feedbacks between aircraft emissions and changes in meteorology. The CTMs tend to result in an increase in surface PM (sub 2.5) primarily over high-traffic regions in the North American midlatitudes. The CRMs, on the other hand, demonstrate the effects of aviation emissions on changing meteorological fields that result in large perturbations over regions where natural emissions (e.g., soil dust and sea spray) occur. The changes in ozone and PM (sub 2.5) found here may be used to contextualize previous estimates of impacts of aircraft emissions on human health.

Air quality↗
NASA NTRS2003

Elevated Ozone in the Troposphere over the Atlantic and Pacific Oceans in the Northern Hemisphere

Tropospheric column ozone (TCO) is derived from differential measurements of total column ozone from Nimus-7 and Earth Probe TOMS, and stratospheric column ozone from the Microwave Limb Sounder instrument on the Upper Atmospheric Research Satellite. It is shown that TCO during summer months over the Atlantic and Pacific Oceans at northern mid-latitudes is about the same (50-60 Dobson Units) as over the continents of North America, Europe and Asia, where surface emissions of nitrogen oxides from industrial sources, biomass and biofuel burning and biogenic emissions are significantly larger. This nearly uniform zonal variation in TCO is modulated by surface topography of the Rocky and Himalayan mountains and Tibetan Plateau where TCO is reduced by 20-30 Dobson Units. The zonal characteristics of TCO derived from satellite measurements are well simulated by a global chemical transport model called MOZART-2 (Model of Ozone and Related Chemical Tracers, version 2). The model results are analyzed to delineate the relative importance of various processes contributing to observed zonal characteristics of TCO, and they are shown that the surface emission of NOx contributes about 50% of the TCO at northern mid-latitudes, especially over the continents of North America, Europe and Asia. The result of TCO derived from TOMS and the analysis from MOZART-2 indicate that TCO is a very useful tool to study tropospheric O3 pollution resulting from surface emissions of pollutants.

Chandra, S.↗
NASA NTRS1990

Directional variations in thermal emission from geologic surfaces

The directional emission properties of geologic surfaces were investigated using a ground-based, hand-held infrared radiometer and thermistor probe. Field sites involved surfaces ranging from smooth playa and sand surfaces to a very rough aa lava flow. Large directional variations in thermal emission were found; they result from the presence of surface roughness at large scales producing spatial variations in kinetic temperature and at small scales producing emissivity variations. These variations are important in remotely determining surface structure and understanding surface energy balance and emission spectra.

Jakosky, Bruce M.↗
NASA NTRS2008

New Developments for Physically-based Falling Snow Retrievals over Land in Preparation for GPM

The NASA Global Precipitation Measurement mission (GPM) concept centers on deploying a Core spacecraft carrying a dual-frequency precipitation radar and a microwave radiometric imager with channels from 10 to 183 GHz to serve as a precipitation physics observatory and a calibration reference to unify a constellation of dedicated and operational passive microwave sensors. Because of the extended orbit of the Core (plus or minus 65 deg) and the enhanced dual frequency radar and high frequency radiometer, GPM will be able to sense falling snow precipitation and light rain over land. Accordingly, GPM has partnered with the Canadian CloudSat/CALIPSO Validation Project (C3VP) to obtain observations to provide one of several important ground-based validation data sets around which the falling snow models and retrieval algorithms can be further developed and tested. In this work we compare and correlate the long time series (Nov.'06 - March '07) measurements of precipitation rate from parsivels to the passive (89, 150, 183 plus or minus 1, plus or minus 3, plus or minus 7 GHz) observations of NOAA's AMSU-B radiometer. We separate the comparisons into categories of no precipitation, liquid rain and falling snow precipitation. We found that there are similar TBs (especially at 89 and 150 GHz) for cases with falling snow and for non-precipitating cases. The comparisons indicate that surface emissivity contributions to the satellite observed TB over land can add uncertainty in detecting and estimating falling snow. The newest results show that by computing brightness temperatures based on CARE radiosonde data and a rough estimate of surface emissivity show that the cloud ice scattering signal in the AMSU-B data is detected. That is the differences in computed TB and AMSU-B TB for precipitating and non-precipitating cases are unique such that the precipitating and non-precipitating cases can be identified. These results require that the radiosonde releases are within an hour of the AMSU-B data. Forest fraction, snow cover, and measured emissivities were combined to calculate the surface emissivities.

Jackson, Gail S.↗
NASA NTRS1992

Spectroscopic investigation of cool giants and the authenticity of their reported microwave emission

Surface velocities and metal abundances for 19 red giant stars in the spectral range G5 to M3 are derived on the basis of AAT echelle spectroscopy data. Attention is given to the question of whether the stars reported to emit radio bursts had different physical properties (rotation rate, macroturbulence, microturbulence, and metal abundance) from those without the radio bursts, which might explain why they were radio emitters. The various velocities had values consistent with those previously found for other similar stars. There was an observed increase in both macroturbulent and, less definitely, microturbulent velocities with lateness of spectral type at K3 and later. A weak correlation between surface velocities and 8.4-GHz radio surface fluxes was found. No connection between iron abundances and radio surface fluxes was detected. It is concluded that few, if any, of the cool giants are radio emitters.

Jones, K. L.↗
NASA NTRS2002

Two Surface Temperature Retrieval Methods Compared Over Agricultural Lands

Accurate, spatially distributed surface temperatures are required for modeling evapotranspiration (ET) over agricultural fields under wide ranging conditions, including stressed and unstressed vegetation. Modeling approaches that use surface temperature observations, however, have the burden of estimating surface emissivities. Emissivity estimation, the subject of much recent research, is facilitated by observations in multiple thermal infrared bands. But it is nevertheless a difficult task. Using observations from a multiband thermal sensor, the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER), estimated surface emissivities and temperatures are retrieved in two different ways: the temperature emissivity separation approach (TES) and the normalized emissivity approach (NEM). Both rely upon empirical relationships, but the assumed relationships are different. TES relies upon a relationship between the minimum spectral emissivity and the range of observed emissivities. NEM relies upon an assumption that at least one thermal band has a pre-determined emissivity (close to 1.0). The benefits and consequences of each approach will be demonstrated for two different landscapes: one in central Oklahoma, USA and another in southern New Mexico.

French, Andrew N.↗
NASA NTRS1989

Attitude angle effects on Nimbus-7 Scanning Multichannel Microwave Radiometer radiances and geophysical parameter retrievals

The attitude of the Nimbus-7 spacecraft has varied significantly over its lifetime. A summary of the orbital and long-term behavior of the attitude angles and the effects of attitude variations on Scanning Multichannel Microwave Radiometer (SMMR) brightness temperatures is presented. One of the principal effects of these variations is to change the incident angle at which the SMMR views the Earth's surface. The brightness temperatures depend upon the incident angle sensitivities of both the ocean surface emissivity and the atmospheric path length. Ocean surface emissivity is quite sensitive to incident angle variation near the SMMR incident angle, which is about 50 degrees. This sensitivity was estimated theoretically for a smooth ocean surface and no atmosphere. A 1-degree increase in the angle of incidence produces a 2.9 C increase in the retrieved sea surface temperature and a 5.7 m/sec decrease in retrieved sea surface wind speed. An incident angle correction is applied to the SMMR radiances before using them in the geophysical parameter retrieval algorithms. The corrected retrieval data is compared with data obtained without applying the correction.

Macmillan, Daniel S.↗
NASA NTRS2005

Nighttime Cirrus Detection using Atmospheric Infrared Sounder Window Channels and Total Column Water Vapor

A method of cirrus detection at nighttime is presented that utilizes 3.8 and 10.4 (micro)m infrared (IR) window brightness temperature differences (dBT) and total column precipitable water (PW) measurements. This technique is applied to the Atmospheric Infrared Sounder (AIRS) and Advanced Microwave Sounding Unit A (AMSU-A) instrument suite on board EOS-Aqua, where dBT is determined from sets of carefully selected AIRS window channels, while PW is derived from the synergistic AIRS and AMSU-A water vapor retrievals. Simulated and observed dBT for a particular value of PW are not constant; several physical factors impact dBT, including the variability in temperature and relative humidity profiles, surface emissivity, instrument noise, and skin/ near-surface air temperature differences. We simulate clear-sky dBT over a realistic range of PWs using 8350 radiosondes that have varying temperature and relative humidity profiles. Thresholds between cloudy and uncertain sky conditions are derived once the scatter in the clear-sky dBT is determined. Simulations of optically thin cirrus indicate that this technique is most sensitive to cirrus optical depth in the 10 (micro)m window of 0.1-0.15 or greater over the tropical and subtropical oceans, where surface emissivity and skin/near-surface air temperature impacts on the IR radiances are minimal. The method at present is generally valid over oceanic regions only, specifically, the tropics and subtropics. The detection of thin cirrus, and other cloud types, is validated using observations at the Atmospheric Radiation Measurement (ARM) program site located at Manus Island in the tropical western Pacific for 89 coincident EOS-Aqua overpasses. Even though the emphasis of this work is on the detection of thin cirrus at nighttime, this technique is sensitive to a broad cloud morphology. The cloud detection technique agrees with ARM-detected clouds 82-84% of the time, which include thin cirrus, as well as other cloud types. Most of the disagreements are well explained by AIRS footprint-scale heterogeneity compared to ARM point measurements, cirrus overlying lower-layer water clouds, possible mixed phase microphysics in midlevel clouds, and significant IR channel noise for cold BT scenes over deep convective towers.

Atmospheric Radiation Measurement (RAM)↗
NASA NTRS1999

1D Variational Assimilation of TOVS/ATOVS Level 1b Data

Recently, it has been shown that the use of observations from satellite-borne microwave and infrared radiometers in data assimilation systems consistently increases forecast skill. Considerable effort has been expended over the past two decades, particularly with the TIROS Operational Vertical Sounder (TOVS), to achieve this result. The positive impact on forecast skill has resulted from improvements in quality control algorithms, systematic error correction schemes, and data assimilation systems. Despite these recent advances, there are still many issues regarding the use of satellite data in data assimilation systems that remain unresolved. For example, at several centers, much of the TOVS data are not assimilated over land as a result of the difficulty in specifying the surface emissivity. In this study, we add the microwave surface emissivity to the state vector so that it is retrieved rather than specified by a model. The LDVAR temperature and humidity information is then assimilated interactively into the Goddard Earth Observing System - Data Assimilation System (GEOS-DAS). Results of 1DVAR assimilations with both TOVS and ATOVS will be shown. We will compare the results obtained with HIRS/MSU/SSU and HIRS/AMSU-A2.

Joiner, J.↗
NASA NTRS2008

GPM Pre-Launch Algorithm Development for Physically-Based Falling Snow Retrievals

In this work we compare and correlate the long time series (Nov.-March) n~easurements of precipitation rate from the Parsivels and 2DVD to the passive (89, 150, 183+/-1, +/-3, +/-7 GHz) observations of NOAA's AMSU-B radiometer. There are approximately 5-8 AMSU-B overpass views of the CARE site a day. We separate the comparisons into categories of no precipitation, liquid rain and falling snow precipitation. Scatterplots between the Parsivel snowfall rates and AMSU-B brightness temperatures (TBs) did not show an exploitable relationship for retrievals. We further compared and contrasted brightness temperatures to other surface measurements such as temperature and relative humidity with equally unsatisfying results. We found that there are similar TBs (especially at 89 and 150 GHz) for cases with falling snow and for non-precipitating cases. The comparisons indicate that surface emissivity contributions to the satellite observed TB over land can add uncertainty in detecting and estimating falling snow. The newest results show that the cloud icc scattering signal in the AMSU-B data call be detected by computing clear air TBs based on CARE radiosonde data and a rough estimate of surface emissivity. That is the differences in computed TI3 and AMSU-B TB for precipitating and nonprecipitating cases are unique such that the precipitating versus ~lon-precipitating cases can be identified. These results require that the radiosonde releases are within an hour of the AMSU-B data and allow for three surface types: no snow on the ground, less than 5 cm snow on the ground, and greater than 5 cm on the ground (as given by ground station data). Forest fraction and measured emissivities were combined to calculate the surface emissivities. The above work and future work to incorporate knowledge about falling snow retrievals into the framework of the expected GPM Bayesian retrievals will be described during this presentation.

Gail Skofronick-Jackson↗
NASA NTRS1977

Determination of three-dimensional radiative exchange factors for the Space Shuttle by Monte Carlo

A program was developed to predict radiative exchange factors in three-dimensional configurations with curved, specularly-reflecting surfaces using the Monte Carlo method. It was shown that this can be done efficiently by using the normal Monte Carlo method for closed configurations and/or high surface emissivities, while Energy Partitioning should be used for open configurations and/or low surface emissivities. Comparison with experiments on the Space Shuttle radiator panels showed that the simple model of gray, diffuse emission is sufficient for the prediction of exchange factors between actual (silver-coated teflon) surfaces. For solar-irradiation exchange factors on the Space Shuttle, on the other hand, spectral and directional variations of surface properties must be taken into account.

Modest, M. F.↗
NASA NTRS2017

Lessons Learned from Radiative Transfer Simulations of the Venus Atmosphere

The Venus atmosphere is extremely complex, and because of this the spectrum of Earths sister planet is likewise intricate and a challenge to model accurately. However, accurate modeling of Venus spectrum opens up multiple opportunities to better understand the planet next door, and even for understanding Venus-like planets beyond our solar system. Near-infrared (1-2.5 um, NIR) spectral windows observable on the Venus nigthside present the opportunity to probe beneath the Venusian cloud deck and measure thermal emission from the surface and lower atmosphere remotely from Earth or from orbit. These nigthside spectral windows were discovered by Allen and Crawford (1984) and have since been used measure trace gas abundances in the Venus lower atmosphere (less than 45 km), map surface emissivity varisions, and measure properties of the lower cloud deck. These windows sample radiation from below the cloud base at roughly 45 km, and pressures in this region range from roughly Earthlike (approx. 1 bar) up to 90 bars at the surface. Temperatures in this region are high: they range from about 400 K at the base of the cloud deck up to about 740 K at the surface. This high temperature and pressure presents several challenges to modelers attempting radiative transfer simulations of this region of the atmosphere, which we will review. Venus is also important to spectrally model to predict the remote observables of Venus-like exoplanets in anticipation of data from future observatories. Venus-like planets are likely one of the most common types of terrestrial planets and so simulations of them are valuable for planning observatory and detector properties of future telescopes being designed, as well as predicting the types of observations required to characterize them.

Arney, G.↗
NASA NTRSDate not supplied

Hyperspectral Radiatve Transfer Modeling and its Applications

We will describe a fast radiative transfer model that is specifically designed for hyperspectral remote sensing applications. The fast radiative transfer model is capable of performing efficient and accurate calculations under cloudy condition and in the presence of solar radiations. The model uses a Principal Component Analysis to speed up computational speed. The PCRTM model is capable of simulating top of atmospheric radiance or reflectance spectral from 50 wavenumber to 30000 wavenumber. The PCRTM has a very good accuracy relative to reference line-by-line radiative transfer models and it saves orders of magnitude computational time. We will show comparisons of the PCRTM model to AIRS, CrIS, IASI, NAST-I, and SCIAMACHY data. We will further show results of applying the PCRTM retrieval algorithm to these remote sensing data to retrieve atmospheric temperature and moisture profiles, CO2, CO, CH4, N2O, and O3 profiles, cloud optical depth, size, phase, and height. Surface properties such as surface emissivity spectra and surface skin temperatures are also retrieved simultaneously.

X Liu↗