Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface layer activation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Pt Nanoparticles on Atomic-Metal-Rich Carbon for Heavy-Duty Fuel Cell Catalysts: Durability Enhancement and Degradation Behavior in Membrane Electrode Assemblies

Proton exchange membrane fuel cells (PEMFCs) are a promising zero-emission power source for heavy-duty vehicles (HDVs). However, long-term durability of up to 25,000 h is challenging because current carbon support, catalyst, membrane, and ionomer developed for traditional light-duty vehicles cannot meet the stringent requirement. Therefore, understanding catalyst degradation mechanisms under the HDV condition is crucial for rationally designing highly active and durable platinum group metal (PGM) catalysts for high-performance membrane electrode assemblies (MEAs). Herein, we report a PGM catalyst consisting of platinum nanoparticles with a high content (40 wt %) on atomic-metal-site (e.g., MnN 4 )-rich carbon support. MEAs with the Pt (40 wt %)/Mn–N–C cathode catalyst achieved significantly enhanced performance and durability, generating 1.41 A cm –2 at 0.7 V under HDV conditions (0.25 mgPt cm –2 and 250 kPa abs pressure) and retaining 1.20 A cm –2 after an extended and accelerated stress test up to 150,000 voltage cycles. Electron microscopy studies indicate that most fine Pt nanoparticles are retained on or/and in the carbon support covered with the ionomer throughout the catalyst layer at the end of life. During the long-term stability test, the observed electrochemical active surface area reduction and performance loss primarily result from Pt depletion in the catalyst layer due to Pt dissolution and redeposition at the interface of the cathode and membrane. Importantly, the first-principle density functional theory calculations further reveal a support entrapment effect of the Mn–N–C, in which the MnN 4 site can specifically adsorb the Pt atom and further retard the Pt dissolution and migration, therefore enhancing long-term MEA durability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Relaxation behavior in low-frequency complex conductivity of sands caused by bacterial growth and biofilm formation by Shewanella oneidensis under a high-salinity condition

Complex electrical conductivity is increasingly used to monitor subsurface processes associated with microbial activities because microbial cells mostly have surface charges and thus electrical double layers. Although highly saline environments are frequently encountered in coastal and marine sediments, there are limited data available on the complex conductivity associated with microbial activities under a high-salinity condition. Therefore, we have developed the spectral responses of complex conductivity of sand associated with bacterial growth and biofilm formation under a highly saline condition of approximately 1% salinity and approximately 2 S/m pore water conductivity with an emphasis on relaxation behavior. A column test is performed, in which the model bacteria Shewanella oneidensis MR-1 are stimulated for cell growth and biofilm formation in a sand pack, whereas the complex conductivity is monitored from 0.01 Hz to 10 kHz. The test results indicate that the real conductivity increases in the early stage due to the microbial metabolites and the increased surface conduction with cell growth but soon begin to decrease because of the reduction of charge passages due to bioclogging. However, the imaginary conductivity significantly increases with time, and clear bell-shaped relaxation behaviors are observed with the peak frequency of 0.1–1 Hz, associated with the double-layer polarization of cells and electrically conductive pili and biofilms. The Cole-Cole relaxation model appears to capture such relaxation behaviors well, and the modeling results indicate gradual increases in normalized chargeability and decreases in relaxation time during bacterial growth and biofilm formation in the highly saline condition. Comparison with previous literature confirms that the high-salinity condition further increases the normalized chargeability, whereas it suppresses the phase shift and thus the imaginary conductivity. Our results suggest that the complex conductivity can effectively capture microbial biomass formation in sands under a highly saline condition.

58 GEOSCIENCES↗
DOE OSTI2022

Formation of carbon and oxygen rich surface layer on high purity magnesium by atmospheric carbon dioxide plasma

Carbon and oxygen-rich corrosion barrier layer formed on Mg by a simple and scalable CO 2 atmospheric plasma (CO 2 -AP) process. The reactive CO 2 -AP interacts with the Mg surface and forms a unique layered structure with the top MgCO 3 /MgO-intermixed particulates pillars and the bottom dense layer. The surface features were simultaneously formed on the nano-/micro-structured MgO layer by carbonate molecules, plasma-active CO 2 molecules, and/or other volatile organic compounds on the nano-/micro-structured MgO particle layer. The resulting surfaces after CO 2 -AP were either hydrophobic or hydrophilic and exhibited lower anodic current or high resistance for Mg corrosion. For the hydrophobic surfaces of CO 2 -AP treated Mg, molecular dynamic simulations were performed to understand the origin of hydrophobicity and identified that the amorphous carbon layers formed on the Mg surface are the source. The environmentally benign abundant-gas-based process enables the cost reduction associated with waste treatment, generation of by-product, and supply of raw material.

36 MATERIALS SCIENCE↗
DOE OSTI2020

High-efficiency single-junction p-i-n GaAs solar cell on roll-to-roll epi-ready flexible metal foils for low-cost photovoltaics

We demonstrate the fabrication and characterization of high-efficiency, single-junction p-i-n GaAs solar cells, on flexible metal foil with epi-ready buffer via roll-to-roll fabrication. Single-junction p-i-n GaAs solar cells were fabricated using metal–organic chemical vapor deposition (MOCVD). Furthermore, an efficiency greater than 13% was obtained at 1 sun, which is the highest reported efficiency on GaAs photovoltaics directly deposited on metal tapes. This exceeds our previously reported study showcasing 11.5% efficiency on single-junction p-n solar cell structure. Improved morphology of p-i-n structure compared with p-n is explained by atomic force microscopy (AFM), scanning electron microscopy (SEM), and helium ion microscopy (HIM) measurements. Time-of-flight secondary ion mass spectrometry (TOF-SIMS) analysis showed reduced Zn diffusion in p-i-n cell compared with the p-n cell. We attribute the improvement in efficiency of p-i-n cells on flexible metal tapes to the quality of the junction, surface morphology, controlled diffusion of species within the active layers, and increase in absorption due to the optimized intrinsic layer thickness.

14 SOLAR ENERGY↗
DOE OSTI2020

Critical Practices in Rigorously Assessing the Inherent Activity of Nanoparticle Electrocatalysts

Accurate activity measurements for electrocatalytic materials are the backbone of impactful electrocatalyst research. Inherent to accurate measurements is the correct accounting of the active catalyst sites and the design of experiments to ensure that these sites are participating in the measured reaction. Improvements in electrocatalyst activity for fuel cell reactions (hydrogen oxidation and oxygen reduction) are essential for the widespread adoption of this carbon-neutral energy source. Activities for these half-reactions can be reported in a variety of ways including specific activities, mass activities, volumetric activities, and half-wave potentials. These values are traditionally measured with a rotating disk electrode (RDE) in which the electrocatalyst is supported on a porous active layer film attached to the RDE. To accurately measure electrocatalyst activity with an RDE, two major sources of errors must be addressed: (i) accurate electrochemical surface area (ECSA) quantification and (ii) fast diffusion of reactants through the active layer film. In this contribution, we first aim to detail through RDE experiments and mass transport modeling the potential errors that can be observed when these factors are not properly addressed. We then present recommendations and discuss techniques for properly constructing electrocatalyst thin films and characterizing the ECSA on monometallic and novel alloy electrocatalysts. These practices, when adopted, ensure greater confidence and reliability in reports of electrocatalyst activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Considerations for Defining G-Values for Aluminum-Clad Spent Nuclear Fuel

Sealed-canister dry storage of aluminum-clad spent nuclear fuel (ASNF) generated by research reactors is an alternative to current storage and disposition pathways as directed by the U.S. Department of Energy. The major challenge faced for this storage approach is radiolytic H 2 generation, including from the aluminum (oxy)hydroxide layers on the surface of ASNF. Experimental and modeling activities have been carried out to characterize the radiolytic yield as part of a DOE-sponsored research program to develop the technical basis for ASNF dry storage. The G-value is a commonly way to report results of radiolysis testing and is defined as the radiolytic yield of a species (e.g. molecular hydrogen) per unit radiation energy deposited into the material system. An independent technical review of the ASNF dry storage technical basis performed by Pacific Northwest National Laboratory raised questions about differences in G-value definitions used for experiments on ASNF surrogates consisting of aluminum samples with adherent (oxy)hydroxides compared to G-values reported in prior literature and how the magnitudes compared between different studies. Material systems resembling ASNF pose complications for measuring/defining G-values to predict the evolution of H 2 in a sealed canister, including i) accounting for radiolytic yields potentially arising from multiple sources, i.e., residual free (vapor), physisorbed, and chemisorbed/chemically bound waters; ii) deciding what portions of the multi-material system to include in the absorbed energy (radiation dose) calculation, considering possible energy exchange between materials as well as measurement limitations, and iii) capturing variations in G-value associated with non-linear yield vs. dose curves and/or dependence on the cover gas. This report summarizes previous literature information on radiolytic H 2 generation and associated G-values from mixed-material systems (generally oxides in contact with water or organic compounds) and from (oxy)hydroxides/hydrates to compare with the definitions and values for ASNF surrogate samples containing adherent aluminum (oxy)hydroxides.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Surface stability and H adsorption and diffusion near surfaces of W borides: a first-principles study

Abstract Understanding the behavior of tungsten boride (W x B y ) surfaces in a fusion reactor environment is an important topic since boronization is a common wall conditioning method used in fusion Tokamaks. We report the results of density functional theory calculations that investigate the surface stability of W x B y (tetragonal I4 1 /amd -WB, hexagonal P 6 3 / mmc -WB 2 and tetragonal I4/m- W 2 B) with low-index orientations, as well as hydrogen (H) energetics near W x B y surfaces. For single element terminated W x B y surfaces, B terminated surfaces are more energetically stable than W terminated as a result of significant reconstruction of B. The H surface adsorption energy and activation energy of H diffusion penetration below W x B y surfaces are mainly related to the outer termination. Specifically, the WB(001) surface terminated with two B layers, referred to as WB(001)-T BB , has higher H adsorption affinity and lower H diffusivity on this surface than other terminations, which is controlled by the significant charge transfer from B to H. However, B atoms on the WB 2 (0001)-T BB surface decrease both H adsorption and diffusivity on the surface, but enhance H diffusion below the surface in comparison to W terminated WB 2 (0001) surface. H would be trapped and diffuse within atomic surface gaps on the WB 2 ( 2 1 ˉ 1 ˉ 0 ) surface, while H below the surface layer would jump along the [0001] direction rather than diffuse into bulk. The surface diffusion activation energy of H on the W 2 B(001) surface slightly varies with terminations. Once H crosses the surface layer of W 2 B(001) with either termination, it prefers to diffuse into the bulk, or back towards the surface, rather than move parallel to the surface. Interestingly, WB 2 (0001) and WB 2 ( 2 1 ˉ 1 ˉ 0 ) surfaces will have relatively higher H retention than the other W x B y surfaces evaluated in this work.

Yang, L. (ORCID:0000000322166071)↗
DOE OSTI2023

Flexible and Extensive Platinum Ion Gel Condensers for Programmable Catalysis

Catalytic condensers composed of ion gels separating a metal electrode from a platinum-on-carbon active layer were fabricated and characterized to achieve more powerful, high surface area dynamic heterogeneous catalyst surfaces. Ion gels comprised of poly(vinylidene difluoride)/1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide were spin coated as a 3.8 μm film on a Au surface, after which carbon sputtering of a 1.8 nm carbon film and electron-beam evaporation of 2 nm Pt clusters created an active surface exposed to reactant gases. Electronic characterization indicated that most charge condensed within the Pt nanoclusters upon application of a potential bias, with the condenser device achieving a capacitance of ∼20 μF/cm 2 at applied frequencies of up to 120 Hz. The maximum charge of ∼10 14 |e – | cm –2 was condensed under stable device conditions at 200 °C on catalytic films with ∼10 15 sites cm –2 . Grazing incidence infrared spectroscopy measured carbon monoxide adsorption isobars, indicating a change in the CO* binding energy of ∼19 kJ mol –1 over an applied potential bias of only 1.25 V. Condensers were also fabricated on flexible, large area Kapton substrates allowing stacked or tubular form factors that facilitate high volumetric active site densities, ultimately enabling a fast and powerful catalytic condenser that can be fabricated for programmable catalysis applications.

Catalysis↗
DOE OSTI2020

Highly Durable and Active Pt/Sb-Doped SnO 2 Oxygen Reduction Reaction Electrocatalysts Produced by Atomic Layer Deposition

Platinum supported on mixed-metal oxides (MMOs) are a class of active and durable cathode catalysts for proton exchange membrane fuel cell (PEMFC) due to a combination of the high oxidative stability of the supports and strong-metal-support interactions (SMSI) that enable them to exceed the activity of Pt/C. Herein, we solve a significant remaining challenge with Pt/MMO systems, namely the relatively low surface area and porosity. This is achieved by dispersing nearly-uniform Pt clusters using atomic layer deposition (ALD) on highly conductive (6.2 S/cm) and stable antimony doped tin dioxide (ATO) support. ALD-Pt/ATO exhibited significantly higher electrochemically active surface area (ECSA) (74 m 2 /g) and oxygen reduction reaction (ORR) catalytic activity (102 mA/mg Pt at 0.9 V vs. RHE) compared to Pt/ATO synthesized using ethylene glycol (ECSA=31 m 2 /g Pt , mass activity=52 mA/mg Pt at 0.9 V vs. RHE) and formic acid reduction methods (ECSA=28 m 2 /g Pt , mass activity=46 mA/mg Pt at 0.9 V vs. RHE). Further characterization showed that wet chemical methods resulted in poorer Pt particle dispersion, poor control over Pt particle size distribution and chemical degradation of the support (during Pt deposition). Given the near-ideal Pt particle size distribution of the ALD-Pt/ATO, particle size growth and loss of ECSA was found to be minimal over the course of rigorous potential cycling. Thus, after 10,000 potential cycles between 1V and 1.5V vs. RHE, ALD-Pt/ATO and other Pt/ATOs were found to retain 100% of their initial ECSA compared to 57.6% retention for Pt/C. Upon testing in a H 2 /air PEMFC, following 1,000 potential cycles, the change in ALD-Pt/ATO performance was negligible while Pt/C exhibited a 68.2% loss of initial peak power density. Thus, ALD-Pt/ATO is an active and highly durable ORR electrocatalyst in PEMFCs under start-up-shut down conditions.

25 ENERGY STORAGE↗
DOE OSTI2023

Electrocatalytic Hydrogen Evolution at Full Atomic Utilization over ITO-Supported Sub-nano-Pt n Clusters: High, Size-Dependent Activity Controlled by Fluxional Pt Hydride Species

A combination of density functional theory (DFT) and experiments with atomically size-selected Pt n clusters deposited on indium-tin oxide (ITO) electrodes was used to examine the effects of applied potential and Pt n size on the electrocatalytic activity of Pt n (n = 1, 4, 7, 8) for the hydrogen evolution reaction (HER). Activity is found to be negligible for isolated Pt atoms on ITO, increasing rapidly with Pt n size, such that Pt 7 /ITO and Pt 8 /ITO have roughly double the activity per Pt atom compared to atoms in the surface layer of polycrystalline Pt. Both DFT and experiment find that hydrogen under-potential deposition (H upd ) results in Pt n /ITO (n = 4, 7, 8) adsorbing ~2 H atoms/Pt atom at the HER threshold potential, equal to ca. double the Hupd observed for Pt bulk or nanoparticles. Here, the cluster catalysts under electrocatalytic conditions are hence best described as a Pt hydride compound, significantly departing from a metallic Pt cluster. The exception is Pt 1 /ITO, where H adsorption at the HER threshold potential is energetically unfavorable. Theory combines global optimization with grand canonical approaches for the influence of potential, uncovering that several metastable structures contribute to HER, changing with the applied potential. It is hence critical to include reactions of the ensemble of energetically accessible Pt n H x /ITO structures to correctly predict the activity vs. Pt n size and applied potential. For the small clusters, spillover of H ads from the clusters to the ITO support is significant, resulting in a competing channel for loss of H ads , particularly at slow potential scan rates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Self-replenishing Ni-rich stainless-steel electrode toward oxygen evolution reaction at ampere-level

In the past few decades, tremendous attention has been devoted to enhancing the activity of oxygen evolution reaction (OER) catalysts for hydrogen production, while the cost and long-term stability of catalysts, which can play an even more important role in industrialization, have been much less emphasized. Herein, we engineered an OER electrode from abundant stainless steel (SS) via facile approaches, and the obtained electrode consists of a Ni-rich oxide surface layer with a Fe-rich metal substrate. An outstanding activity was observed with an overpotential of 316 mV at 100 mA cm −2 in 1 M KOH electrolyte. Additionally, an electrode self-replenishing concept is proposed in which a Ni-rich catalyst layer can be regenerated from a metallic substrate due to the difference in diffusion and dissolution rates of metal oxides/hydroxides, and this regeneration is validated by various characterizations. A recorded degradation rate of 0.012 was observed at 1000 mA cm −2 for 1000 h. The facile engineering of OER electrodes from SS combined with the self-replenishing catalyst can potentially address the cost, activity, and long-term stability barriers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

From Langmuir isotherm to Brunauer–Emmett–Teller isotherm

Abstract Developed for multilayer adsorption, the Brunauer–Emmett–Teller ( BET) isotherm considers the adsorption of the first layer as an equilibrium chemical reaction between adsorbate molecules and adsorption sites and the adsorption of the second and subsequent layers as a condensation–evaporation process. Following the recent development of an activity‐based formulation for the Langmuir isotherm for monolayer adsorption, we present an activity‐based formulation for the BET isotherm in which species concentrations are replaced with species activities. Capturing the adsorbent surface heterogeneity for the adsorption of the first layer, the resulting thermodynamic BET isotherm is shown to accurately represent pure component adsorption isotherms over the relative pressure range of zero to unity or prior to the onset of capillary condensation. The thermodynamic BET isotherm should facilitate accurate estimation of monolayer adsorption capacity and the corresponding adsorbent surface area.

Vyawahare, Pradeep↗
DOE OSTI2022

Synthesis of perovskite polyhedron nanocrystals with equivalent facets and the controlled growth of Pt nanoparticles with differing surface concentration of oxidized Pt 4+ /Pt 2+ species

Co-existence of different surfaces in traditional polycrystalline heterogeneous catalysts imposes a challenge to induce different kinds of catalytic species and average reactivity. Supported metal/oxide model catalyst designed with equivalent well-defined surfaces and active species provides an opportunity to control the uniformity, maintain efficient activity, and understand catalytic mechanisms at the atomic and molecular levels. Herein, sub-20 nm perovskite-structure BaTiO 3 polyhedron nanocuboids and Zr-substituted rhombic dodecahedron nanocrystals were synthesized and employed as the oxide support for the subsequent uniform growth of 1–2 nm Pt nanoparticles. These Pt nanoparticles were well dispersed on the 12 equivalent (110) facets of BaTi 0.75 Zr 0.25 O 3 rhombic dodecahedra and on the 6 equivalent (100) facets of BaTiO 3 nanocuboids. The main active centers on the Pt/BaTi 0.75 Zr 0.25 O 3 catalysts in the oxidized surface layer of Pt (111) facets are Pt 4+ versus Pt 2+ , which is in contrast to the oxidized surface layer of the Pt (100) facets on the Pt/BaTiO 3 cuboids where there are a greater number of Pt 2+ species. Compared with Pt/BaTiO 3 nanocuboids, the Pt/BaTi 0.75 Zr 0.25 O 3 catalysts demonstrated higher CO catalytic oxidation activity with a lower apparent Arrhenius activation energy. Finally, this work advances our ability to synthesize metal/oxide model catalyst that offer equivalent facets and highly uniform active centers with reasonable surface area in order to gain insight in reaction mechanisms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Lattice Oxygen Redox Reversibility Modulation in Enhancing the Cycling Stability of Li-Rich Cathode Materials

The practical application of lithium-rich layered oxides is prohibited by the drawbacks such as severe capacity and voltage degradation resulting from unstable oxygen redox environment and the accompanied irreversible oxygen release. In this report a facile and effective strategy is proposed to regulate the oxygen redox chemistry via foreign Fe doping and its induced intrinsic transition metal (TM) doping as well as the in situ constructed spinel surface layer. The Fe doping, together with the induced intrinsic TM dual doping, can stabilize the lattice oxygen in the bulk due to the formed stronger Fe—O bond, and restrain the irreversible TM migration and then the undesirable phase transformation. More importantly, thermodynamical energy barrier of oxygen activation is dramatically decreased by the O 2p–Fe 3d charge-transfer, allowing stable oxygen redox activity. And the pre-constructed spinel layer can effectively stabilize the surface lattice oxygen and suppress harmful interfacial side-reactions. Such a simple optimizing method make the modified cathode exhibit a high specific capacity of 298 mAh g -1 at 0.2 C, outstanding cycling stability with a superior capacity and voltage retentions of 92.5% and 90.8%, respectively, after 400 cycles at 1 C. This study provides a new direction for developing advanced Li-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2024

Surface Self-Diffusion Induced Sintering of Nanoparticles

Despite the critical role of sintering phenomena in constraining the long-term durability of nanosized particles, a clear understanding of nanoparticle sintering has remained elusive due to the challenges in atomically tracking the neck initiation and discerning different mechanisms. Through the integration of in situ transmission electron microscopy and atomistic modeling, this study uncovers the atomic dynamics governing the neck initiation of Pt–Fe nanoparticles via a surface self-diffusion process, allowing for coalescence without significant particle movement. Real-time imaging reveals that thermally activated surface morphology changes in individual nanoparticles induce significant surface self-diffusion. Further, the kinetic entrapment of self-diffusing atoms in the gaps between closely spaced nanoparticles leads to the nucleation and growth of atomic layers for neck formation. This surface self-diffusion-driven sintering process is activated at a relatively lower temperature compared to the classic Ostwald ripening and particle migration and coalescence processes. The fundamental insights have practical implications for manipulating the morphology, size distribution, and stability of nanostructures by leveraging surface self-diffusion processes.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Carbon Thaw Rate Doubles When Accounting for Subsidence in a Permafrost Warming Experiment

Permafrost soils, which are perennially frozen soils found throughout cold regions, contain vast quantities of carbon and ice. When permafrost thaws, carbon can be lost to the atmosphere, contributing to climate change. This means it is important to track permafrost thaw, which is often done using active layer thickness, or the depth of the seasonally thawed surface layer of soil. However, ice volume can be lost from thawing permafrost, causing the soil surface to drop. Conventional measurements do not account for this surface drop, and the rate of thaw could therefore be underestimated. We found that experimentally warmed soils dropped at a rate of 6 cm year-1, mostly due to loss of ice volume and also due to the loss of soil mass. When accounting for the change in soil surface height over time, the full depth of permafrost thaw was 49% greater. The increased depth of thaw resulted in more than twice as much carbon being thawed as was estimated with standard methods that did not account for subsidence. These findings suggest that permafrost is thawing more quickly than long-term records indicate and that this could result in additional carbon release contributing to climate change.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Pathways for methane emissions and oxidation that influence the net carbon balance of a subtropical cypress swamp

We evaluated the major pathways for methane emissions from wetlands to the atmosphere at four wetland sites in the Big Cypress National Preserve in southwest Florida. Methane oxidation was estimated based on the d13C-CH4 of surface water, porewater, and bubbles to evaluate mechanisms that limit surface water emissions. Spatially-scaled methane fluxes were then compared to organic carbon burial rates. The pathway with the lowest methane flux rate was diffusion from surface waters (3.50 ± 0.22 mmol m-2 d-1). Microbial activity in the surface water environment and/or shallow oxic sediment layer oxidized 26 ± 3% of the methane delivered from anerobic sediments to the surface waters. The highest rates of diffusion were observed at the site with the lowest extent of oxidation. Ebullition flux rates were 2.2 times greater than diffusion and more variable (7.79 ± 1.37 mmol m-2 d-1). Methane fluxes from non-inundated soils were 1.6 times greater (18.4 ± 5.14 mmol m-2 d-1) than combined surface water fluxes. Methane flux rates from cypress knees (emergent cypress tree root structures) were 3.7 and 2.3 times higher (42.0 ± 6.33 mmol m-2 d-1) than from surface water and soils, respectively. Cypress knee flux rates were highest at the wetland site with the highest porewater methane partial pressure, suggesting that the emergent root structures allow methane produced in anaerobic sediment layers to bypass oxidation in aerobic surface waters or shallow sediments. Scaled across the four wetlands, emissions from surface water diffusion, ebullition, non-inundated soils, and knees contributed to 14 ± 2%, 25 ± 6%, 34 ± 10%, and 26 ± 5% of total methane emissions, respectively. When considering only the three wetlands with cypress knees present, knee emissions contributed to 39 ± 5% of the total scaled methane emissions. Finally, the molar ratio of CH4 emissions to OC burial ranged from 0.03 to 0.14 in the wetland centers indicating that all four wetland sites are net sources of atmospheric warming potential on 20-100 yr timescales, but net sinks over longer time scales (500 yr) with the exception of one wetland site that was a net source even over 500 yr time scales.

Ward, Nicholas D.↗
DOE OSTI2021

On Assessing ERA5 and MERRA2 Representations of Cold-Air Outbreaks Across the Gulf Stream

The warm Gulf Stream sea surface temperatures (SSTs) strongly impact the evolution of winter clouds behind atmospheric cold fronts. Such cloud evolution remains challenging to model. Here, the Gulf Stream is too wide within the ERA5 and MERRA2 reanalyses, affecting the turbulent surface fluxes. Known problems within the ERA5 boundary layer (too-dry and too-cool with too strong westerlies), ascertained primarily from ACTIVATE 2020 campaign aircraft dropsondes and secondarily from older buoy measurements, reinforce surface flux biases. In contrast, MERRA2 winter surface winds and air-sea temperature/humidity differences are slightly too weak, producing surface fluxes that are too low. Reanalyses boundary layer heights in the strongly-forced winter cold-air-outbreak regime are realistic, whereas late-summer quiescent stable boundary layers are too shallow. Nevertheless, the reanalysis biases are small, and reanalyses adequately support their use for initializing higher-resolution cloud process modeling studies of cold-air outbreaks.

54 ENVIRONMENTAL SCIENCES↗