Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface morphologies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Surface morphology of erbium silicide

The surface of rare-earth silicides (Er, Tb, etc.), formed by the reaction of thin-film metal layers with a silicon substrate, is typically dominated by deep penetrating, regularly shaped pits. These pits may have a detrimental effect on the electronic performance of low Schottky barrier height diodes utilizing such silicides on n-type Si. This study suggests that contamination at the metal-Si or silicide-Si interface is the primary cause of surface pitting. Surface pits may be reduced in density or eliminated entirely through either the use of Si substrate surfaces prepared under ultrahigh vacuum conditions prior to metal deposition and silicide formation or by means of ion irradiation techniques. Silicide layers formed by these techniques possess an almost planar morphology.

Lau, S. S.↗

Rapid thermal annealing effect on amorphous hydrocarbon film deposited by CH{sub 4}/Ar dielectric barrier discharge plasma on Si wafer: Surface morphology and chemical evaluation

The effects of rapid thermal annealing (RTA) on amorphous hydrogenated carbon-coated film on Si wafer, deposited by CH{sub 4}/Ar dielectric barrier discharge plasma (at half of the atmospheric pressure), was examined. Bubbles-like structures were formed on the surface of the deposited carbon-coated film. The surface morphology studied by scanning electron microscopy (SEM), which showed that the effect of RTA on the film changing the morphological property drastically at 600 deg. C and most of the bubbles started evaporating above 200 deg. C. The inbuilt energy dispersive x-ray in SEM gives the quantitative analysis of the annealed surface. X-ray photoelectron spectroscopy results of the as-deposited films agree with the IR results in that the percent of Si-CH{sub 3}, Si-O-Si and C-O(H) stretching vibrational band in the film. Most of these bands disappeared as the sample was annealed at 600 deg. C in Ar medium.

36 MATERIALS SCIENCE↗

Atomic force microscopy and scanning electron microscopy characterization of the controlling of surface morphology of epoxy‐amine‐cured spin‐coated films

Abstract Atomic force microscopy (AFM) was successfully used to study spin‐coated, amine‐cured epoxy film microstructure and morphology. The air‐epoxy and epoxy‐substrate interfaces were examined using tapping‐mode height and phase imaging AFM. The impact of relative humidity on the morphology and microstructure of the surfaces was determined. AFM was able to elucidate the changes on the surface as relative humidity during processing increased. It was observed that large nodular formations formed on the epoxy surface expose to the air but not epoxy surface formed on the substrate in addition to varying regions of more or less compliant structures, which was attributed to carbamate formation caused by the amine curing agent reaction with atmospheric CO 2 . Scanning electron microscopy (SEM) was used to further elucidate interface and interphase morphology of spin‐coated epoxies. Experimentation also demonstrated that post‐curing above the glass transition did not change the morphology structure, suggesting surface structures are “locked‐in.” SEM was used to further elucidate how the interface and interphase change with changing environmental conditions at both the air‐epoxy and epoxy‐substrate interface/interphases, including the impact of atmospheric CO 2 on Marangoni cell formation.

Shenk, Timothy M.↗

Analysis of the Surface Morphology and Chemical Composition of Zr-Nb3Sn Alloys with Zr Different Concentrations

The Zr inclusion in Nb3Sn can improve the high magnetic field performance of Nb3Sn radio frequency cavities. The focus of this project is to characterize the surface properties and chemical composition of Zr-Nb3Sn. Nb3Sn was doped with two different concentrations of Zr. ~0.5%, and ~24% Zr. Various spectroscopy techniques were used to examine how the surface morphology and chemical composition changes with increasing Zr fraction in Nb3Sn.

Sue, Micah↗

Ion beam sputter modification of the surface morphology of biological implants

The surface chemistry and texture of materials used for biological implants may significantly influence their performance and biocompatibility. Recent interest in the microscopic control of implant surface texture has led to the evaluation of ion beam sputtering as a potentially useful surface roughening technique. Ion sources, similar to electron bombardment ion thrusters designed for propulsive applications, are used to roughen the surfaces of various biocompatible alloys or polymer materials. These materials are typically used for dental implants, orthopedic prostheses, vascular prostheses, and artificial heart components. Masking techniques and resulting surface textures are described along with progress concerning evaluation of the biological response to the ion beam sputtered surfaces.

Weigand, A. J.↗

Ion-beam-sputter modification of the surface morphology of biological implants

The surface chemistry and texture of materials used for biological implants may significantly influence their performance and biocompatibility. Recent interest in the microscopic control of implant surface texture has led to the evaluation of ion-beam sputtering as a potentially useful surface roughening technique. Ion sources, similar to electron-bombardment ion thrusters designed for propulsive applications, are used to roughen the surfaces of various biocompatible alloys or polymer materials. These materials are typically used for dental implants, orthopedic prostheses, vascular prostheses, and artificial heart components. Masking techniques and resulting surface textures are described along with progress concerning evaluation of the biological response to the ion-beam-sputtered surfaces.

Weigand, A. J.↗

Surface Morphology of Undoped and Doped ZnSe Films

Rare-earth doped ions in polar II-VI semiconductors have recently played an important role in the optical properties of materials and devices. In this study, undoped ZnSe and erbium doped ZnSe films were grown by radio frequency (RF) magnetron sputtering method. Atomic Force Microscopy (AFM) was used together with optical microscopy and UV-Vis spectroscopy to characterize the films. Doped samples were found to have higher surface roughness and quite different surface morphology compared to that of undoped samples. The grown films generally show a relatively smooth and uniform surface indicating that they are of overall good quality. The impact of plasma etching on ZnSe:Er film examined under AFM is also discussed.

George, T.↗

Analysis of the Surface Morphology and Chemical Composition of Zr-Nb3Sn Alloys with Zr Different Concentrations

The inclusion of zirconium (Zr) in niobium-tin (Nb3Sn) significantly enhances the performance of Nb3Sn radiofrequency cavities in high magnetic fields. This research project is dedicated to characterizing the surface properties and chemical composition of Zr-doped Nb3Sn. Two different concentrations of Zr were used for doping: approximately 0.5% and 24%. Various spectroscopy techniques were employed to analyze how the surface morphology and chemical composition of Nb3Sn change with increasing Zr content. The findings of this study indicate that the grain size decreases as the Zr concentration increases. In samples with 24% Zr, nanometer-sized particles, likely oxides, were observed. X-ray photoelectron spectroscopy (XPS) data revealed that the thickness of niobium oxides (NbOx) decreases with increasing Zr, while the thickness of tin oxides (SnOx) increases. Additionally, grain size distribution analysis showed that the average grain size is around 5300 nm , with a grain area density of about 165 grains/μm .

Sue, Micah↗

Effects of total thickness on (001) texture, surface morphology, and magnetic properties of [Fe/Pt]{sub n} multilayer films by monatomic layer deposition

Atomic-scale [Fe/Pt]{sub n} multilayer films with different total thickness were prepared on thermally oxidized Si (100) substrates at room temperature by monatomic layer deposition using dc-magnetron and rf-magnetron sputtering. Effects of the total thickness on (001) texture, surface morphology, and magnetic properties of the postannealed films have been investigated. It is found that the particlelike structure films with perfect (001) texture and perpendicular magnetic anisotropy are obtained with a thickness of less than or equal to 6.5 nm. After 500 deg. C annealing, the films with thickness of 6.5 and 11.9 nm show very smooth surface. In addition, with increasing total thickness of the films, (001) texture and perpendicular magnetic anisotropy of the annealed films deteriorate, and the films become continuous in structure. The total thickness of the films also affects the exchange-coupling interaction among FePt magnetic grains and the magnetization reversal process.

36 MATERIALS SCIENCE↗

Structural and surface morphological study of Ni doped ZnS nanoparticles

Samples of Zn{sub 1−x}Ni{sub x}S (x=0.00, 0.04, 0.08) nanoparticles were synthesized by using the co-precipitation method at room temperature. Structural parameters were investigated by X – ray diffraction (XRD), it reveals that all samples of Ni doped ZnS exhibit the cubic structure with no additional impurity phase. The average crystallite size of all samples is in the range of 2.70 to 2.90 nm. The lattice parameters, X – ray density, volume of unit cell and grain size were calculated using XRD data. It is found that the lattice parameter increases with increasing Ni concentration. Surface morphology of samples was investigated using field emission scanning electron microscopy (FE-SEM). From this study it is concluded that samples exhibit cubic morphology. Chemical compositions of Ni doped and pure ZnS samples were detected using EDAX spectra. It is confirmed from EDAX that Ni substitute into ZnS lattice.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Impact of surface morphology of Si substrate on performance of Si/ZnO heterojunction devices grown by atomic layer deposition technique

In this paper, the authors have investigated the structural, optical, and electrical characteristics of silicon nanowire (SiNW)/zinc oxide (ZnO) core–shell nanostructure heterojunctions and compared their characteristics with Si/ZnO planar heterojunctions to investigate the effect of surface morphology of Si substrate in the characteristics of Si/ZnO heterojunction devices. In this work, ZnO thin film was conformally deposited on both p-type 〈100〉 planar Si substrate and substrate with vertically aligned SiNW arrays by atomic layer deposition (ALD) method. The x-ray diffraction spectra show that the crystalline structures of Si/ZnO heterojunctions are having (101) preferred orientation, whereas vertically oriented SiNW/ZnO core–shell heterojunctions are having (002)-oriented wurtzite crystalline structures. The photoluminescence (PL) spectra of Si/ZnO heterojunctions show a very sharp single peak at 377 nm, corresponding to the bandgap of ZnO material with no other defect peaks in visible region; hence, these devices can have applications only in UV region. On the other hand, SiNW/ZnO heterojunctions are having band-edge peak at 378 nm along with a broad emission band, spreading almost throughout the entire visible region with a peak around 550 nm. Therefore, ALD-grown SiNW/ZnO heterojunctions can emit green and red light simultaneously. Reflectivity measurement of the heterojunctions further confirms the enhancement of visible region peak in the PL spectra of SiNW/ZnO heterojunctions, as the surface of the SiNW/ZnO heterojunctions exhibits extremely low reflectance (<3%) in the visible wavelength region compared to Si/ZnO heterojunctions (>20%). The current–voltage characteristics of both Si/ZnO and SiNW/ZnO heterojunctions are measured with large area ohmic contacts on top and bottom of the structure to compare the electrical characteristics of the devices. Due to large surface to-volume ratio of SiNW/ZnO core–shell heterojunction devices, the output current rating is about 130 times larger compared to their planar version at 2 V forward bias voltage. This higher output current rating can be exploited for fabricating high-performance nanoelectronic and optoelectronic devices in near future.

42 ENGINEERING↗

The Seismic Effect of Impacts on Asteroid Surface Morphology: Early Modeling Results

In recent years, spacecraft observations of asteroids 951 Gaspra, 243 Ida, 253 Mathilde, and 433 Eros have shown the overriding dominance of impact processes with regard to the structure and appearance of these small, irregular bodies. One currently unanswered question is: to what degree does seismic shaking from impacts affect the surface morphology of these bodies? Through detailed modeling, we begin to address this question.

Richardson, J. E.↗

Investigation of microstructure, surface morphology, and hardness properties of PtIr films by magnetron sputtering

Pt{sub 1-x}Ir{sub x} films with x varying from 22.76 to 63.25 at. % are deposited on (100) Si wafer substrates at 400 deg. C by magnetron sputtering deposition. The effects of the Ir concentration on the microstructure, morphology, and hardness of PtIr films are investigated by field emission scanning electron microscopy, x-ray diffraction, atomic force microscopy, and nanoindentation system. The columnar structures are observed by field emission scanning electron microscopy. X-ray diffraction analysis reveals that PtIr films have preferred orientation along Pt(111) when the Ir concentration is below 50.84 at. %. When the Ir content is more than 50.84 at. %, the PtIr film shifts to another preferred orientation, Ir(111). The surface morphology is analyzed by atomic force microscopy. The roughness of the PtIr films decreases with increasing Ir content. The hardness of all the PtIr films is below 20 GPa. The maximum hardness of the PtIr films is about 14.9 GPa when the Ir concentration is 57.9 at. %.

36 MATERIALS SCIENCE↗

Effect of bath temperature on surface morphology and photocatalytic activity of ZnO nanorods

ZnO nanorods were prepared by using simple hydrothermal method using four different bath temperatures. All the prepared ZnO nanorods are annealed at 450°C and are characterized by using various techniques such as X-ray diffraction, UV spectra and scanning electron microscopy. Photocatalytic activity of the prepared ZnO nanorods is analyzed. A novel photocatalytic reactor designed with ZnO nanorods prepared at 90°C shows enhanced catalytic efficiency. The role of light irradiation time, bath temperature and surface morphology of the ZnO nanorods on the performance of photocatalytic reaction is analyzed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Electrical properties and surface morphology of electron beam evaporated p-type silicon thin films on polyethylene terephthalate for solar cells applications

One way to realize low-cost thin film silicon (Si) solar cells fabrication is by depositing the films with high-deposition rate and manufacturing-compatible electron beam (e-beam) evaporation onto inexpensive foreign substrates such as glass or plastic. Most of the ongoing research is reported on e-beam evaporation of Si films on glass substrates to make polycrystalline solar cells but works combining both e-beam evaporation and plastic substrates are still scarce in the literature. This paper studies electrical properties and surface morphology of 1 µm electron beam evaporated Al-doped p-type silicon thin films on textured polyethylene terephthalate (PET) substrate for application as an absorber layer in solar cells. In this work, Si thin films with different doping concentrations (including an undoped reference) are prepared by e-beam evaporation. Energy dispersion X-ray (EDX) showed that the Si films are uniformly doped by Al dopant atoms. With increased Al/Si ratio, doping concentration increased while both resistivity and carrier mobility of the films showed opposite relationships. Root mean square (RMS) surface roughness increased. Overall, the Al-doped Si film with Al/Si ratio of 2% (doping concentration = 1.57×10{sup 16} atoms/cm{sup 3}) has been found to provide the optimum properties of a p-type absorber layer for fabrication of thin film Si solar cells on PET substrate.

36 MATERIALS SCIENCE↗

Self-Healing Thermal Annealing: Surface Morphological Restructuring Control of GaN Nanorods

With advances in nanolithography and dry etching, top-down methods of nanostructuring have become a widely used tool for improving the efficiency of optoelectronics. These nano dimensions can offer various benefits to the device performance in terms of light extraction and efficiency, but often at the expense of emission color quality. Broadening of the target emission peak and unwanted yellow luminescence are characteristic defect-related effects due to the ion beam etching damage, particularly for III–N based materials. In this article we focus on GaN based nanorods, showing that through thermal annealing the surface roughness and deformities of the crystal structure can be “self-healed”. Correlative electron microscopy and atomic force microscopy show the change from spherical nanorods to faceted hexagonal structures, revealing the temperature-dependent surface morphology faceting evolution. The faceted nanorods were shown to be strain- and defect-free by cathodoluminescence hyperspectral imaging, micro-Raman, and transmission electron microscopy (TEM). In-situ TEM thermal annealing experiments allowed for real time observation of dislocation movements and surface restructuring observed in ex-situ annealing TEM sampling. This thermal annealing investigation gives new insight into the redistribution path of GaN material and dislocation movement post growth, allowing for improved understanding and in turn advances in optoelectronic device processing of compound semiconductors.

36 MATERIALS SCIENCE↗