Search NASA⌕ Search

SEARCH · Search NASA

Results for “threads”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

Benchmark and Framework for Encouraging Research on Multi-Threaded Testing Tools

A problem that has been getting prominence in testing is that of looking for intermittent bugs. Multi-threaded code is becoming very common, mostly on the server side. As there is no silver bullet solution, research focuses on a variety of partial solutions. In this paper (invited by PADTAD 2003) we outline a proposed project to facilitate research. The project goals are as follows. The first goal is to create a benchmark that can be used to evaluate different solutions. The benchmark, apart from containing programs with documented bugs, will include other artifacts, such as traces, that are useful for evaluating some of the technologies. The second goal is to create a set of tools with open API s that can be used to check ideas without building a large system. For example an instrumentor will be available, that could be used to test temporal noise making heuristics. The third goal is to create a focus for the research in this area around which a community of people who try to solve similar problems with different techniques, could congregate.

Havelund, Klaus↗
NASA NTRS2008

The Formation of Filament Threads in a Sheared Magnetic Field

This slide presentation reviews the mechanism that form the filament threads in the sheared magnetic field of the solar photosphere. There are observations of the filaments, a chart showing the magnetic field configuration for the filaments, and charts that show the thermal instability, and thermal conduction. Discussion of the question "How is it possible for a magnetic field to inhibit heat flow in a coronal plasma without simultaneously restricting the mass flow required for the growth of density condensations?" is reviewed. Equations that are used in the model are given. The characteristics of dynamic condensations are reviewed. There are charts that show the density perturbations for principal dynamic condensation mode and 1st harmonic. The characteristics of the kinematic condensations are also discussed. The types of perturbations that were studied are: (1) Generic perturbation with T(sub 0) < T(sub c) (2) Generic perturbation with T(sub 0) = T(sub c) (3) Random perturbation with T(sub 0)< T(sub c).

condensational instability↗
NASA NTRS2011

Methodology for Determining Limit Torques for Threaded Fasteners

In aerospace design, where minimizing weight is always a priority, achieving the full capacity from fasteners is essential. To do so, the initial bolt preload must be maximized. The benefits of high preload are well documented and include improved fatigue resistance, a stiffer joint, and resistance to loosening. But many factors like elastic interactions and embedment tend to lower the initial preload placed on the bolt. These factors provide additional motivation to maximize the initial preload. But, to maximize bolt preload, you must determine what torque to apply. Determining this torque is greatly complicated by the large preload scatter generally seen with torque control. This paper presents a detailed methodology for generating limit torques for threaded fasteners. This methodology accounts for the large scatter in preload found with torque control, and therefore, addresses the statistical nature of the problem. It also addresses prevailing torque, a feature common in aerospace fasteners. Although prevailing torque provides a desired locking feature, it can also increase preload scatter. In addition, it can limit the amount of preload that can be generated due to the torsion it creates in the bolt. This paper discusses the complications of prevailing torque and how best to handle it. A wide range of torque-tension bolt testing was conducted in support of this research. The results from this research will benefit the design engineer as well as analyst involved in the design of bolted joints, leading to better, more optimized structural designs.

Hissam, Andy↗
NASA NTRS2016

Z-2 Threaded Insert Design and Testing

NASA's Z-2 prototype space suit contains several components fabricated from an advanced hybrid composite laminate consisting of IM10 carbon fiber and fiber glass. One requirement was to have removable, replaceable helicoil inserts to which other suit components would be fastened. An approach utilizing bonded in inserts with helicoils inside of them was implemented. During initial assembly, cracking sounds were heard followed by the lifting of one of the blind inserts out of its hole when the screws were torqued. A failure investigation was initiated to understand the mechanism of the failure. Ultimately, it was determined that the pre-tension caused by torqueing the fasteners is a much larger force than induced from the pressure loads of the suit which was not considered in the insert design. Bolt tension is determined by dividing the torque on the screw by a k value multiplied by the thread diameter of the bolt. The k value is a factor that accounts for friction in the system. A common value used for k for a non-lubricated screw is 0.2. The k value can go down by as much as 0.1 if the screw is lubricated which means for the same torque, a much larger tension could be placed on the bolt and insert. This paper summarizes the failure investigation that was performed to identify the root cause of the suit failure and details how the insert design was modified to resist a higher pull out tension.

Ross, Amy↗
NASA NTRS2016

Prevailing Torque Locking Feature in Threaded Fasteners Using Anaerobic Adhesive

This paper presents results from tests to assess the use of anaerobic adhesive for providing a prevailing torque locking feature in threaded fasteners. Test procedures are developed and tests are performed on three fastener materials, four anaerobic adhesives, and both unseated assembly conditions. Five to ten samples are tested for each combination. Tests for initial use, reuse without additional adhesive, and reuse with additional adhesive are performed for all samples. A 48-hour cure time was used for all initial use and reuse tests. Test data are presented as removal torque versus removal angle with the specification required prevailing torque range added for performance assessment. Percent specification pass rates for the all combinations of fastener material, adhesive, and assembly condition are tabulated and reveal use of anaerobic adhesive as a prevailing torque locking feature is viable. Although not every possible fastener material and anaerobic adhesive combination provides prevailing torque values within specification, any combination can be assessed using the test procedures presented. Reuse without additional anaerobic adhesive generally provides some prevailing torque, and in some cases within specification. Reuse with additional adhesive often provides comparable removal torque data as in initial use.

Hernandez, Alan↗
NASA NTRSDate not supplied

Materials Informatics at NASA GRC: Machine Learning Surrogate Modeling, Data Management, and Integrated Toolsets for Establishing/Maintaining the Digital Thread

Integrated Computational Materials Engineering (ICME) has recently received widespread attention due to its promises in reducing dependence on physical testing for engineering design by relying on simulation, reducing both time and cost to market for various applications. ICME however requires validated multiscale material models, which heavily depend on available test data with full material and test pedigree, including material processing, test and measurement equipment, raw data collection, and analysis methodology and results that is findable and usable, along with integrated, efficient toolsets for effectively passing information across various length and time scales across such models. At the NASA Glenn Research Center under the Transformational Tools and Technologies Project, significant recent efforts have been directed towards establishing the required cyberinfrastructure to enable optimized ICME processes and the design of “fit-for-purpose” materials to achieve the goals outlined in the NASA Vision 2040 report. Such efforts include development of multiscale physics-based material models, which can be used to train highly efficient surrogate machine learning models, development of best practices and infrastructure for effective, traceable materials information management, and development of toolsets that integrate with physics-based codes, machine learning models, and an information management system to enable high throughput of materials data collection and analysis, establishment of digital twins and the digital thread, and automation of the ICME design process for material optimization.

Machine Learning↗
NASA NTRS2020

Aerospace Threaded Fastener Strength With Joint Shims

Bolted joints with a nonload-carrying member, like a shim or spacer, and loaded in shear introduce bending moment into the bolt that reduces the bolt shear load-carrying capability. Various design criteria are available that attempt to account for the additional bending and provide reduced allowable bolt loads. The actual shear load-carrying capability of a typical aerospace fastener with various thickness shims was determined by test using both aluminum and steel joint members. The results are compared against existing design criteria, which are shown to be adequate for their intended purposes.

threaded fastener, bolt, strength criteria, shim, ↗
NASA NTRS1966

High pressure tube coupling requires no threads or flares

High pressure tube coupling connects to any straight, unthreaded, and unflared tubing end without deforming or damaging the tubing. The coupling grips the tube wall tightly between an external compression sleeve and an internal hollow mandrel. It is adaptable to standard screw fittings for test stand attachment.

Stein, J. A.↗
NASA NTRS1971

Instrument accurately measures stress loads in threaded bolts

Interferometric instrument response is linearly related to axial tensile stresses, and, under idealized conditions, measurement errors are within approximately plus or minus 1 percent. Ultimate accuracy of instrument depends on a number of variables, such as bolt material, dimensions, and geometry and uniformity of stresses and temperature.

Rollins, F. R., Jr.↗
NASA NTRS1975

LANDSAT menhaden and thread herring resources investigation

The author has identified the following significant results. The most significant achievement realized thus far has been the successful completion of the data acquisition phase. This success must be attributed to the interest, support, and competency of the participants. The apparent consistency of water color and turbidity condition over time and between test sites at sites of menhaden capture is significant especially since color is readily measured with satellite and aircraft sensors and a LANDSAT MSS based computer model for inferring tubidity has been developed.

Kemmerer, A. J.↗
NASA NTRS1976

LANDSAT menhaden and thread herring resources investigation, Gulf of Mexico

The author has identified the following significant results. The most significant achievements thus far include the successful charting of high probability fishing areas from LANDSAT MSS data and the successful simulation of an operational satellite system to provide tactical information for the commercial harvest of menhaden.

Savastano, K.↗