Search NASA⌕ Search

SEARCH · Search NASA

Results for “transient kinetics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Reaction Pathways over ZnZrO 2 -Based Catalysts and Catalytic Sorbents

Reactive capture and conversion (RCC) is a process intensification approach that integrates CO 2 capture and hydrogenation within a single unit, removing the CO 2 purification and storage steps of traditional process flow schemes. This alters the catalytic step from a traditional steady-state (SS) flow process to a transient capture and conversion cycle, which could lead to product distributions distinct from those observed in conventional SS experiments. Such differences are investigated in the combined capture and hydrogenation of carbon dioxide to methanol over a ZnZrO 2 catalyst and a ZnZrO 2 + NaNO 3 /Mg 3 AlO x catalytic sorbent (CS) using fixed-bed kinetic measurements, in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), and steady-state isotopic transient kinetic analysis-DRIFTS (SSITKA-DRIFTS). Under SS conditions, ZnZrO 2 produced methanol through sequential hydrogenation of HCOO* and CH 3 O* intermediates. On the contrary, CO was attributed primarily to CO 2 dissociation at oxygen vacancies, as supported by isotopic shifts and measured reaction orders. For the CS, isotopic switching experiments suggested that monodentate carbonate species (CO 3 2− , abbreviated as m-CO 3 2− ) act as active intermediates that can be hydrogenated to HCOO* and subsequently to CH 3 O. Under RCC conditions, in situ DRIFTS and isotopic experiments reveal that m-CO 3 2− species formed during the CO 2 capture step follow two competing routes upon H 2 exposure: (i) direct hydrogenation to methane on the sorbent domain or (ii) migration of m-CO 3 2− to the ZnZrO 2 domain, where they are hydrogenated to methanol through the HCOO pathway. Overall, RCC enables carbonate hydrogenation routes not observed under SS cofeed conditions. Thus, the reaction pathways and rates during RCC can be different from operation under conventional SS conditions, and the product distribution is determined here by competition between carbonate hydrogenation on sorbent sites and migration to ZnZrO 2 for methanol synthesis.

CCUS↗
DOE OSTI2026

Isopentane Disproportionation in Lewis Acidic Chloroaluminate Ionic Liquid

Lewis acidic chloroaluminate ionic liquid diluted in dichloromethane catalyzes the disproportionation of alkanes, such as isopentane, via carbenium ions in a reaction readily initiated by carbenium ion precursors such as tert-butyl chloride (TBC). The carbenium ion-AlCl 4 – ion-pairs stabilized by the ionic liquid-dichloromethane solution are the key intermediates in two distinctive kinetic regimes, i.e., a transient regime (0–5 min) and a steady-state regime (after 5 min). The transient regime constitutes the majority of isopentane conversion and is governed by the initial carbenium ion concentration. In the steady-state regime, disproportionation occurs at a considerably lower rate, affected by the carbenium ion concentration, the concentration of the ionic liquid, and the reaction temperature. The formation of alkenes observed in the 1 H NMR spectra of the reacting substrates, along with the DFT calculations, suggests that deprotonation of carbenium ion-pairs reduces their concentration, decreasing, in turn, the reaction rate. Kinetic modeling indicates that the transient regime is significantly controlled by the hydride transfer (k HT ) and the deprotonation rate constants (k DP ), while the steady-state regime is additionally influenced by the alkene protonation rate constant (k –DP ). The overall activation energy of the reaction at the steady state, expressed as E a,steady-state regime = E a,HT – E a,DP + E a,–DP , was 54 kJ/mol. The reaction mechanism and the kinetics highlight the potential of Lewis acid-catalyzed conversions of hydrocarbons under remarkably mild conditions.

Deprotonation↗
DOE OSTI2022

Generation of localized reactor point kinetics parameters using coupled neutronic and thermal fluid models for pebble-bed reactor transient analysis

The systems analysis of anticipated operating occurrences and design basis accidents for pebble-bed reactor systems requires knowledge of neutron point kinetics equations (PKE) parameters. Typically, the generation of PKE parameters is performed in a global manner using standalone neutronics calculations, without the inclusion of thermal fluid distributions. We utilize Griffin and Pronghorn for generating global and local PKE parameters which includes the use of thermal fluid distributions to account for localized effects. This work establishes a methodology for calculating PKE parameters for a pebble bed reactor with a coupled neutronics/thermal fluids analysis. PKE parameters generated on a global and local basis are compared against a diffusion solve for a typical load-following transient. Locally-generated neutron kinetic parameters are able to reduce the maximum error in the transient power level from 5% to below 1.5%; along with this, bulk temperature errors were reduced from 12 K to 4 K.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
NASA NTRS1994

What can we learn from relaxation measurements of a laser-perturbed atmosphere? A modeling study

The chemical kinetic aspects of a transient increase in OH and HO2 by several orders of magnitude are explored in three model tropospheres. This chemical kinetic modeling effort was undertaken to support the operation of a pump-and-probe LIDAR instrument. A powerful excimer laser pulse perturbs the troposphere after which its relaxation back to steady state is examined by remote sensing, for example by DIAL or LIF. Instead of probing ambient levels of key free radicals, a study of the relaxation kinetics in real time enables chemical mechanistic studies in situ.

Clericetti, Agostino↗
NASA NTRS1987

A spectral view of nonlinear fluxes and stationary-transient interaction in the atmosphere

Nonlinear spectral transfers of kinetic energy and enstrophy, and stationary-transient interaction, are studied using global FGGE data for January 1979. The spectral transfers are found to be dominated by two dynamically distinct components, one due to nonlinear self-interactions within the transient flow and the other arising from coupled interactions between the stationary and transient parts of the flow. The former seems to be attributable to two-dimensional homogeneous turbulence, while the second cannot be understood within that theory. It is argued that the mixed stationary-transient interactions can be understood physically as a process of shear-induced spectral transfer of transient enstrophy along lines of constant zonal wavenumber. The transients act mainly to strengthen the stationary flow, and this 'forcing' operates on a timescale comparable to presumed viscous timescales.

Shepherd, Theodore G.↗
DOE OSTI2022

Thermal diffusivity recovery and defect annealing kinetics of self-ion implanted tungsten probed by insitu transient grating spectroscopy

Tungsten is a promising candidate material for plasma-facing armour components in future fusion reactors. A key concern is irradiation-induced degradation of its normally excellent thermal transport properties. In this comprehensive study, thermal diffusivity degradation in ion-implanted tungsten and its evolution from room temperature (RT) to 1073 K is considered. Five samples were exposed to 20 MeV self-ions at RT to achieve damage levels ranging from 3.2 x 10 -4 to 3.2 displacements per atom (dpa). Transient grating spectroscopy with in-situ heating was then used to study thermal diffusivity evolution as a function of temperature. Using a kinetic theory model, an equivalent point defect density is estimated from the measured thermal diffusivity. The results showed a prominent recovery of thermal diffusivity between 450 K and 650 K, which coincides with the onset of mono-vacancy mobility. After 1073 K annealing samples with initial damage of 3.2 x 10 -3 dpa or less recover close to the pristine value of thermal diffusivity. For doses of 3.2 x 10 -2 dpa or higher, on the other hand, a residual reduction in thermal diffusivity remains even after 1073 K annealing. Transmission electron microscopy reveals that this is associated with extended, irradiation-induced dislocation structures that are retained after annealing. A sensitivity analysis shows that thermal diffusivity provides an efficient tool for the assessing total defect content in tungsten up to 1000 K.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Time-Resolved Structural Kinetics of an Organic Mixed Ionic–Electronic Conductor

The structure and packing of organic mixed ionic–electronic conductors have an especially significant effect on transport properties. In operating devices, this structure is not fixed but is responsive to changes in electrochemical potential, ion intercalation, and solvent swelling. Toward this end, the steady-state and transient structure of the model organic mixed conductor, poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS), is characterized using multimodal time-resolved operando techniques. Steady-state operando X-ray scattering reveals a doping-induced lamellar expansion of 1.6 Å followed by 0.4 Å relaxation at high doping levels. Time-resolved operando X-ray scattering reveals asymmetric rates of lamellar structural change during doping and dedoping that do not directly depend on potential or charging transients. Further, time-resolved spectroscopy establishes a link between structural transients and the complex kinetics of electronic charge carrier subpopulations, in particular the polaron–bipolaron equilibrium. These findings provide insight into the factors limiting the response time of organic mixed-conductor-based devices, and present the first real-time observation of the structural changes during doping and dedoping of a conjugated polymer system via X-ray scattering.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Kinetic Model for Moisture-Controlled CO 2 Sorption

The understanding of the sorption/desorption kinetics is essential for practical applications of moisture-controlled CO 2 sorption. We introduce an analytic model of the kinetics of moisture-controlled CO 2 sorption and its interpretation in two limiting cases. In one case, chemical reaction kinetics on pore surfaces dominates, in the other case, diffusive transport through the sorbent defines the kinetics. Here, we show that reaction kinetics, which is dominant in the first case, can be expressed as a linear combination of 1st and 2nd order kinetics in agreement with the static isotherm equation derived and validated in a previous paper. The interior transport kinetics can be described by non-linear diffusion equations. By combining all carbon species into a single equation, we can eliminate — in certain limits — the source terms associated with chemical reactions. In this case, the governing equation is ∂θ/∂t = –∇ · (–D eff ∇ θ ). For a sorbent in a form of a flat sheet or a membrane, one can maintain the same functional form of a diffusion equation by introducing a generalized effective diffusivity D M that combines contributions from both surface chemical reaction kinetics and interior diffusive transport kinetics. Experimental data of transient CO 2 flux in a preconditioned commercial anion exchange membrane fit well to the 1st order model as long as very dry states are avoided, validating the theory. The observed DM for a preconditioned commercial anion exchange membrane ranges from 6.6× 10 -14 to 7.1× 10 -14 m 2 s -1 at 35°C. These small values compared to typical ionic diffusivities imply a very slow kinetics, which will be the largest issue that needs to be addressed for practical application. The collected transient CO 2 flux data are used to predict the magnitude of a continuous CO 2 pumping flux in an active membrane that transports CO 2 against a CO 2 concentration gradient. The pumped CO 2 flux is supported by water flux due to a water concentration gradient.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Development of the TREAT M2 experiment as a transient benchmark

A transient benchmark based on the Transient Reactor Test Facility (TREAT) M2 Calibration experiment (M2-CAL) is under development. TREAT, at Idaho National Laboratory, is a graphite moderated air-cooled research reactor which has been used extensively for fuel material testing under extreme and accident conditions. Accurate benchmark models are a beneficial component in the operations, experimental planning, and development of TREAT. In this work, we present a transient benchmark model for the M2-CAL experiment core loading. The benchmark model incorporates the coupling between the Monte Carlo Code SERPENT and the computational fluid dynamics code OpenFOAM to capture the temperature feedback mechanism. The M2-CAL transient 2580 was simulated in this work. A pre-transient analysis was performed to determine the optimum core composition and conditions before the beginning of the transient. The analysis was validated against historic TREAT kinetic measurements and the worth of the transient rod T-2. The axial power distribution in the flux wire for the M2-CAL experiment was determined and contrasted with the experiment. The model was then used to simulate the M2-CAL transient 2580 experiment based on the reported pre-transient and transient conditions. Several transient observables were calculated and compared to the experiment. The model shows good agreement with the experimental power traces, period, and average increase of power at the power ramp (time > 7.8 s). Inverse point kinetics analysis was performed during the period of the power ramp for the model and the experiment based on that, the temperature feedback component was isolated and contrasted with the experimental feedback. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2025

Nonpigmented PsbR is involved in the integrity of excitation landscape in higher plant photosystem II, a case study in Arabidopsis thaliana and a mutant

PsbR is a nonpigmented 10 kDa protein in Photosystem II (PSII) in algae and plants. A recent structural study clarified its enigmatic structural location in a Photosystem II megacomplex that has baffled the community for more than four decades. Our current study interrogates whether absence of PsbR affects the overall dynamics of excitation energy migration within light harvesting complexes (LHC) and PSII super assemblies using highly-active PSII membrane particles, so-called BBY particles, isolated from a PsbR deletion mutant (ΔPsbR) of Arabidopsis thaliana. A femto-second (fs)-time-resolved transient absorption experimentation recorded at 77 K with selective excitation of Chl b which is exclusively present in LHCs enabled us to resolve the temporal differences in LHC→LHC and LHC→PSII excitation energy transfer steps. By applying specific target spectro-kinetic models to the transient absorption datasets, we demonstrated that the time constants of Chl a LHC → Chl a LHC excitation transfer significantly elongates in the ΔPsbR LHC-PSII particles, suggestive of the decreased aggregation level of photosynthetic proteins in the mutant. These findings highlight excitation energy transfer integrity in LHC-PSII assembly is not only determined by the pigmented light-harvesting complexes, but also synergistically by the nonpigmented PSII components. Furthermore, the disturbed integrity in dynamics of excitation energy transfer pathway within LHC-PSII supercomplex is discussed in the context of the altered LHC-PSII megacomplexes type I and II architectures which result from the absence of the PsbR protein in higher plant PSII.

Chlorophyll↗
DOE OSTI2022

Unstructured mesh-based multi-physics reactor transient simulation with iMC code

In this study, we present a time-dependent Monte Carlo simulation result about a complex fuel-loaded light water reactor system with thermal-hydraulic feedback using the KAIST iMC code. The intra-pin temperature distribution is calculated based on Monte Carlo-tallied detailed power distribution and the finite element heat transfer method. The temperature effect of fuel, absorber, and coolant are adequately reflected into the dynamic response by the on-the-fly Doppler broadened cross-section correction. For the time-dependent Monte Carlo transport simulation, the predictor-corrector quasi-static Monte Carlo method is used for this study. We tested the coupled analysis framework with a 17-by-17 fuel assembly loaded with the centrally-shielded burnable absorber (CSBA) fuel element. The temperature feedback effect on the material cross-section and the moderator density incurred negative reactivity in response to the external positive reactivity insertion, showing the inherent stability of the reactor system. The pin-wise power and temperature change during the system transient are presented and discussed. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2025

The microscopic mechanisms of high temperature oxidation of Haynes 282

Nickel-based superalloy finds widespread applications in aerospace and extreme environments. They are known for their high temperature oxidation resistance under extended periods. However, the oxide formation and evolution which sets the stages for the later parabolic oxidation kinetics is not fully understood. This paper aims to provide new insights into the transient stage oxidation mechanism and kinetics of a typical Ni-based superalloy (Haynes 282). While tracking the chemical and microstructural evolution under micrometer scale at 800°C, we show that the oxide scale and its grain boundary species change significantly during the initial stages of oxidation and can have a profound impact on the oxidation kinetics. Cr 2 O 3 forms initially at the grain boundary along with minor amount of Al 2 O 3 . Then, the grain boundary region is enriched with copious amounts TiO 2 while Cr migrates away from the grain boundary. A noticeable change in the isothermal oxidation kinetics observed likely results from a mechanistic change from uniform surface oxidation to preferential outward diffusion of Ti 4+ ions through the grain boundary. Through first-principles calculations combined with energy dispersive spectroscopy, we confirmed the preferential outward diffusion of Ti 4+ ions as the diffusion barrier is lower for Ti than Cr along the grain boundaries. In conclusion, these findings highlight the critical role of early-stage grain boundary oxidation dynamics in dictating the long-term oxidation resistance of Ni-based superalloys and provide a foundation for future strategies to enhance their performance in extreme environments.

DFT↗
NASA NTRS1986

Transient gain-versus-absorption laser probing of spin-orbit states, kinetics and dynamics

The spin-orbit populations of excited (2P1/2) and ground (2P3/2) state Br atoms at 2714 nm and I atoms at 1315 nm are examined using a tunable F-center laser and a diode laser. The transient laser gain-versus-absorption measurements are utilized to estimate quantum yields of the spin-orbit states in the photodissociation of Br- and I-containing compounds; the continuum yields for Br2 are investigated in terms of temperature. The collisional release, Doppler velocity effects, and differing reactivity of the spin-orbit excited and ground state atoms are studied. It is noted that the transient gain versus absorption technique is applicable to the analysis of kinetic phenomena due to its high sensitivity and excellent time resolution.

Smedley, John E.↗
DOE OSTI2022

Transient MOC with frequency transform and DSA on unstructured mesh

We present an implementation of the transient method of characteristics (MOC) with isotropic time derivatives, accelerated by diffusion synthetic acceleration (DSA). The fully implicit frequency transform method is used to solve the transient problem with analytic precursor integration. The code works on meshes composed of almost any of the commonly used non-curvilinear finite element types, and can handle the deformation of geometry in time-dependent transport calculations. We present results of a continuous Fourier analysis for the transient multigroup DSA problem, and representative benchmarking results are presented for the C5G7-TD benchmark in 2D showing reasonable performance and agreement compared to other codes. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2026

Transient Catalytic Reaction Analysis Through Signal Defragmentation

The Temporal Analysis of Products (TAP) pulse response technique provides valuable insights into catalytic function and reaction kinetics. However, complex fragmentation patterns in the TAP mass spectrometry signals can complicate precise quantification, particularly when analyzing transient gas flux data typical of TAP experiments. This work demonstrates a standard defragmentation method that deconvolves transient TAP signals while maintaining the temporal resolution of the experiment. First, the integrals of calibration gas fluxes are used to determine the fingerprint fragmentation pattern and construct a fragmentation matrix. This matrix is then used to defragment experimental flux data at each recorded time point via a non-negative least squares regression. The effectiveness of this method is demonstrated using virtual data and control experiments with a TAP reactor system. The defragmentation is then applied to the more complex propane dehydrogenation reaction on a chromia/alumina catalyst, which can contain up to ten significant gas species in the reactor outlet. Initial propane pulsing reveals an induction period during which propane is fully oxidized to CO2, followed by partial reduction to CO. Afterwards, there is a transition in chemistries towards coking and propylene production. Our example illustrates a practical method for the accurate determination of the time-dependent reactant/product concentrations and rates for a thorough analysis of the propane dehydrogenation kinetics. This approach can be broadly applied to any transient mass spectrometry experiment for a better understanding of catalyst-reaction dynamics.

36 - MATERIALS SCIENCE↗
NASA NTRS2010

Oxidation of SiC Fiber-Reinforced SiC Matrix Composites with a BN Interphase

SiC-fiber reinforced SiC matrix composites with a BN interphase were oxidized in reduced oxygen partial pressures of oxygen to simulate the environment for hypersonic vehicle leading edge applications. The constituent fibers as well as composite coupons were oxidized in oxygen partial pressures ranging from 1000 ppm O2 to 5% O2 balance argon. Exposure temperatures ranged from 816 C to 1353 C (1500 F to 2450 F). The oxidation kinetics of the coated fibers were monitored by thermogravimetric analysis (TGA). An initial rapid transient weight gain was observed followed by parabolic kinetics. Possible mechanisms for the transient oxidation are discussed. One edge of the composite coupon seal coat was ground off to simulate damage to the composite which allowed oxygen ingress to the interior of the composite. Oxidation kinetics of the coupons were characterized by scanning electron microscopy since the weight changes were minimal. It was found that sealing of the coupon edge by silica formation occurred. Differences in the amount and morphology of the sealing silica as a function of time, temperature and oxygen partial pressure are discussed. Implications for use of these materials for hypersonic vehicle leading edge materials are summarized.

Opila, Elizabeth↗