Search NASA⌕ Search

SEARCH · Search NASA

Results for “ultrathin”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

The Effect of Adsorbed Volatile Organic Compounds on an Ultrathin Water Film Measurement

Using surface plasmon resonance imaging (SPRi), we have recently shown for the first time the existence of a monolayer water film between droplets during dropwise condensation. This study examines the effect of adsorbed volatile organic compounds (VOCs) on the ultrathin film measurement using SPRi. Further, the work presents the proper surface-treatment process that enables measurements of the ultrathin water layer during high-speed imaging of dropwise condensation at 3000 frame per second. In this study, two methods were applied for cleaning the surface (gold-coated glass)—(1) standard cleaning procedure (SCP) using acetone, isopropyl alcohol, and deionized water and (2) SCP followed by air plasma cleaning. This work discusses the effect of the cleaning procedures on surface roughness, contact angle, and surface chemistry using atomic force microscopy, optical microscopy, and an X-ray photoelectron spectroscope meter. The results showed that SCP before the SPRi is a proper surface-treatment method. The effect of adsorbed VOCs during dropwise condensation on a surface treated with SCP was measured to be 0.0025 (reflectivity unit), which was 70% smaller than the reflectance associated with a monolayer water film. The results of this work confirm a monolayer water film observation during the dropwise condensation, which has been reported before.

36 MATERIALS SCIENCE↗
NASA NTRS1979

High efficiency ultrathin silicon solar cells

This paper summarizes developments in ultrathin, (50 micron), silicon solar cells for high power-to-weight ratio space power systems. The fabrication technology developments included uniformly thinning oriented silicon slices, enhancement of internal reflection, optimizing high-temperature processes, surface texturing and back surface field enhancement. The best textured-surface ultrathin cells have achieved 14.3% AMO efficiency, while pilot-manufacturing quantities of smooth-surfaced cells have been fabricated with efficiencies of 12%. Data are presented on cell structure, fabrication collection efficiencies and optical properties.

Storti, G.↗
NASA NTRS1990

Study of temperature-dependent ultrathin oxide growth on Si(111) using variable-angle spectroscopic ellipsometry

The monolayer-sensitive variable-angle spectroscopic ellipsometry technique was used to study the temperature-dependent growth mechanisms of an ultrathin oxide layer on top of silicon. The oxidation was done in atomic oxygen produced in a pure oxygen plasma and driven by an RF power source. The results have been compared with the recently proposed model of Murali and Murarka for ultrathin oxide growth on top of silicon. The activation energies of different growth parameters associated with the oxide growth have also been determined.

De, Bhola N.↗
NASA NTRS1993

Optical response of an ultrathin film and a large-angle grain-boundary in superconducting YBa2Cu3O(7-delta)

We have investigated the optical response of epitaxial ultrathin (3 nm) YBa2Cu3O(7-delta) film on an NdGaO3 substrate and thin (50 nm) film of YBa2Cu3O(7-delta) on a bicrystal SrTiO3 substrate. While the current-voltage characteristics of the ultrathin film indicate a Kosterlitz-Thouless transition (associated with vortex-antivortex unbinding) at a temperature T(KT), we do not observe any optical response at or below T(KT). An enhanced optical response with nonbolometric characteristics was observed from the grain-boundary as compared to the bolometric optical response of the epitaxial film at the resistive transition. These results indicate that the grain-boundary weak links play a significant role in the enhanced optical response near Tc.

Bhattacharya, S.↗
DOE OSTI2021

Preparation of large ultrathin free-standing polymer films

A method of making large ultrathin free-standing polymer films without use of a sacrificial layer includes the steps of providing a substrate, applying a polyelectrolyte material to said substrate, applying a polymer material onto said substrate and onto said polyelectrolyte material, and directly delaminating said polymer material from said substrate and said polyelectrolyte to produce the ultrathin free-standing polymer film.

Stadermann, Michael↗
DOE OSTI2020

Ultrathin Amorphous Silica Membrane Enhances Proton Transfer across Solid-to-Solid Interfaces of Stacked Metal Oxide Nanolayers while Blocking Oxygen

A large jump of proton transfer rates across solid-to-solid interfaces by inserting an ultrathin amorphous silica layer into stacked metal oxide nanolayers is discovered using electrochemical impedance spectroscopy and Fourier-transform infrared reflection absorption spectroscopy (FT-IRRAS). The triple stacked nanolayers of Co 3 O 4 , SiO 2 , and TiO 2 prepared by atomic layer deposition (ALD) enable a proton flux of 2400 ± 60 s -1 nm -2 (pH 4, room temperature), while a single TiO 2 (5 nm) layer exhibits a threefold lower flux of 830 s -1 nm -2 . Based on FT-IRRAS measurements, this remarkable enhancement is proposed to originate from the sandwiched silica layer forming interfacial SiOTi and SiOCo linkages to TiO 2 and Co 3 O 4 nanolayers, respectively, with the O bridges providing fast H + hopping pathways across the solid-to-solid interfaces. Finally, together with the complete O 2 impermeability of a 2 nm ALD-grown SiO 2 layer, the high flux for proton transport across multi-stack metal oxide layers opens up the integration of incompatible catalytic environments to form functional nanoscale assemblies such as artificial photosystems for CO 2 reduction by H 2 O.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Multi–Resonant Mie Resonator Arrays for Broadband Light Trapping in Ultrathin c–Si Solar Cells

Effective photon management is critical to realize high power conversion efficiencies for thin crystalline silicon (c–Si) solar cells. Standard few–100–µm–thick bulk cells achieve light trapping with macroscopic surface textures covered by thin, continuous antireflection coatings. Such sizeable textures are challenging to implement on ultrathin cells. Here, it is illustrated how nanoscale Mie–resonator–arrays with a bimodal size distribution support multiple resonances that can work in concert to achieve simultaneous antireflection and light–trapping across the broad solar spectrum. The effectiveness of these light–trapping antireflection coatings is experimentally demonstrated on a 2.8 µm–thick c–Si solar cell. The measured short–circuit current and corresponding power conversion efficiency are notably improved, achieving efficiencies as high as 11.2%. Measurements of the saturation current density on completed cells indicate that thermal oxides can effectively limit surface recombination. Finally, the presented design principles are applicable to a wide range of solar cells.

14 SOLAR ENERGY↗
DOE OSTI2022

Ultrathin-film composite (uTFC) membranes based on amorphous perfluoropolymers for liquid separations

Thin-film composite membranes based on ~100nm cross-linked polyamides (PAs) are state-of-the-art membranes for liquid separations such as desalination. However, the PA layer shows poor antifouling properties and instability in chlorine solutions. Herein, we show for the first time that glassy amorphous perfluoropolymers (PFPs, such as Teflon AF and Hyflon AD) can be fabricated into ultrathin film composite (uTFC) membranes with a selective layer of <20nm for desalination. Increasing the polymer concentration in the coating solutions from 0.05 mass% to 0.3 mass% increases the selective layer thickness from 9 to 25nm. When Teflon AF2400 was fabricated into 16-nm selective layers on various porous supports, the water permeance decreases from 0.37 LMH/bar for PES10k to 0.07 LMH/bar for PES1k, and the Na 2 SO 4 rejection increases from 86.6% to 95.2%. While the water permeance is lower than the commercial PA-based NF membranes, the rejection in these PFP-based membranes is comparable. Furthr, the effect of the porous support on the water permeance can be ascribed to the geometric restriction and satisfactorily described using an empirical model. Interestingly, the membranes also exhibit good Na + /Li + separation performance and stable performance for organic solvent nanofiltration, showcasing the versatility of the PFP-based uTFC membranes for various liquid separations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Ultrathin silicon oxide prepared by in-line plasma-assisted N 2 O oxidation (PANO) and the application for n-type polysilicon passivated contact

We develop a plasma-assisted nitrous-oxide (N 2 O) gas oxidation (PANO) method to prepare the ultrathin silicon oxide (SiO x ) for polysilicon (poly-Si) passivated contact. The effects of preparation conditions, including the substrate temperature, processing time, and plasma power, are studied. Afterwards, we integrate the PANO SiO x into the polysilicon passivated contact and optimize the passivation and contact performances. Excellent surface passivation with the n-type poly-Si and PANO SiO x on the n-type c-Si wafer is achieved by 880 °C annealing, which shows competitive passivation quality to the one with NASO SiO x . Champion implied open-circuit voltage (iV oc ) and single-sided recombination saturated current (J 0 ) reach 730 mV and 4.3 fA/cm 2 after crystallization; and they are further improved to 747 mV and 2.0 fA/cm 2 (3 × 10 15 cm -3 ) after subsequent AlO x /SiN x hydrogenation. Using transmission electron microscopy (TEM), we find that the thickness of PANO SiO x ranges 1.1–2.4 nm and the controlled nitric acid oxidized SiO x (NAOS) ranges 1.3–1.8 nm. The contact resistivity (ρ c ) is typically <10 mΩ cm 2 with the annealing temperature of >820 °C. Also, the crystallinity, phosphorous in-diffusion profile, and current-leaking density of the passivated contacts are investigated. In general, the PANO SiO x and in-situ doping amorphous silicon precursor can be fabricated in one PECVD system without additional equipment or transfer procedures, which is favorable for the high-efficiency, low-cost industrial manufacture.

14 SOLAR ENERGY↗
DOE OSTI2020

Effects of particle inclusions on cracking in ultrathin barrier films

Here, the effects of particle inclusions with different mechanical properties on the development of cracks in ultra-thin barrier films have been studied. Two types of particles, alumina and poly(styrene-b-methyl methacrylate) with large differences in their elastic modulus were used, representing both hard and soft inclusions. Particles were seeded onto polyethylene naphthalate substrates and subsequently coated with atomic layer deposited Al 2 O 3 as a barrier film. Ca corrosion tests used to determine the performance of the barrier films revealed that soft polymer particle inclusions severely affect the development of cracking in barrier films as compared to stiff ceramic particles. Tensile tests also confirmed that the barrier films with polymer particle inclusions have the lowest value of critical onset strain. Parametric simulations, conducted by varying the elastic modulus of the particle inclusions over a wide range, resulted in a larger strain energy release rate near particle inclusions which promotes crack formation and negatively impacts the performance of barrier films with softer particle inclusions. Thus, the combination of high residual stresses in the barrier films with the presence of soft particle inclusions is found the most detrimental for the development of high-performance ultrathin barrier films.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Chapter 3: Ultrathin Oxides for Solar Cells

This chapter discusses the many uses of ultrathin oxide layers across a broad range of photovoltaic (PV) technologies. The chapter is broken down into six sections, working from the solar absorber outwards: passivation layers, selective contact/buffer layers, recombination layers, barrier layers, anti-reflective coatings, and anti-soiling layers. The goal is to introduce the layer function, outline the scientific mechanisms behind each function, and provide illustrative examples from academic literature and industry. One theme in this chapter is the multifunctionality of oxide layers in the PV device stack, that is, a single layer rarely has only one purpose and therefore certain ideas will build upon other sections. The chapter covers a wide range of material and the discussions and examples are by no means exhaustive. The best efforts have been made to capture the central concepts for each topic and direct the reader to additional resources that have been found by the authors to be useful and relevant.

anti-reflection coatings↗
DOE OSTI2024

Evidence for Rashba magnetism in ultrathin ferromagnet–heavy metal bilayers

Here, we show that ultrathin transition ferromagnet–heavy metal bilayers exhibit anomalous temperature- and electric bias-dependent behaviors near the Curie temperature, inconsistent with the usual Weiss magnetism. Characterization by several complementary techniques and analysis of the dependence on composition reveal that these effects originate from the interplay between interfacial spin-orbit interaction and magnetism, resulting in the emergence of a state with distinct magnetic and magnetoelectronic properties that can be described in the framework of the Rashba model as Rashba magnetism. Our findings open a route for the characterization and control of interfacial spin-orbit phenomena for efficient spin-orbitronic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Fabrication of Quasi-Random Photonic Crystals for Ultrathin Solar Cells

Quasi-random structures for light management present an intermediate ordering between a completely random rough surface and a perfect ordered photonic crystal. They are attractive for broadband applications due to their power spectral density. This makes them excellent candidates for photovoltaic applications. Here we present preliminary fabrication results creating quasi-random structures using a self-assembly approach based on polymer blends and wet etching. We are able to create patterns with average lattice constant of five to two microns. This structure is proposed to be used as a rear patterning layer for ultrathin GaAs cells for better sustainability and radiation- hard devices.

41 EE - Solar Energy Technologies Office (EE-4S)↗
DOE OSTI2022

Alternative Rear Contacts for Ultrathin CdSexTe1-x Solar Cells

The back contact is a key component for further developments of CdSeTe solar cells. In this contribution, we investigate several materials and designs that could help the development of highly-reflective, ohmic back contacts for conventional (3.45 um) and thin (800 nm) CdSeTe solar cells. We also explore numerically, nanostructured metal back contacts for light-trapping in ultrathin (200 nm) CdTe solar cells.

back contact↗
DOE OSTI2023

Real-Time Monitoring of Strain Accumulation and Relief during Epitaxy of Ultrathin Co Ferrite Films with Varied Co Content

Ultrathin Co x Fe 3-x O 4 films of high structural quality and with different Co content (x = 0.6–1.2) were prepared by reactive molecular beam epitaxy on MgO(001) substrates. Epitaxy of these ferrite films is extensively monitored by means of time-resolved (operando) X-ray diffraction recorded in out-of-plane geometry to characterize the temporal evolution of the film structure. The Co ferrite films show high crystalline ordering and smooth film interfaces independent of their Co content. All Co x Fe 3-x O 4 films exhibit enhanced compressive out-of-plane strain during the early stages of growth, which partly releases with increasing film thickness. When the Co content of the ferrite films increases, the vertical-layer distances increase, accompanied by slightly increasing film roughnesses. The latter result is supported by surface-sensitive low-energy electron diffraction as well as X-ray reflectivity measurements on the final films. In contrast, the substrate–film interface roughness decreases with increasing Co content, which is confirmed with X-ray reflectivity measurements. In addition, the composition and electronic structure of the ferrite films is characterized by means of hard X-ray photoelectron spectroscopy performed after film growth. The experiments reveal the expected increasing Fe 3+ /Fe 2+ cation ratios for a higher Co content.

36 MATERIALS SCIENCE↗
DOE OSTI2023

CMOS-Compatible Ultrathin Superconducting NbN Thin Films Deposited by Reactive Ion Sputtering on 300 mm Si Wafer

We report a milestone in achieving large-scale, ultrathin (~5 nm) superconducting NbN thin films on 300 mm Si wafers using a high-volume manufacturing (HVM) industrial physical vapor deposition (PVD) system. The NbN thin films possess remarkable structural uniformity and consistently high superconducting quality across the entire 300 mm Si wafer, by incorporating an AlN buffer layer. High-resolution X-ray diffraction and transmission electron microscopy analyses unveiled enhanced crystallinity of (111)-oriented δ-phase NbN with the AlN buffer layer. Notably, NbN films deposited on AlN-buffered Si substrates exhibited a significantly elevated superconducting critical temperature (~2 K higher for the 10 nm NbN) and a higher upper critical magnetic field or H c2 (34.06 T boost in H c2 for the 50 nm NbN) in comparison with those without AlN. These findings present a promising pathway for the integration of quantum-grade superconducting NbN films with the existing 300 mm CMOS Si platform for quantum information applications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Structure-Related Electronic and Magnetic Properties in Ultrathin Epitaxial Ni x Fe 3–x O 4 Films on MgO(001)

Off-stoichiometric Ni x Fe 3–x O 4 ultrathin films (x < 2.1) with varying Ni content x and thickness 16 (±2) nm were grown on MgO(001) by reactive molecular beam epitaxy. Synchrotron-based high-resolution X-ray diffraction measurements reveal vertical compressive strain for all films, resulting from a lateral pseudomorphic adaption of the film to the substrate lattice without any strain relaxation. Complete crystallinity with smooth interfaces and surfaces is obtained independent of the Ni content x. For x < 1 an expected successive conversion from Fe 3 O 4 to NiFe 2 O 4 is observed, whereas local transformation into NiO structures is observed for films with Ni content x > 1. However, angle-resolved hard X-ray photoelectron spectroscopy measurements indicate homogeneous cationic distributions without strictly separated phases independent of the Ni content, while X-ray absorption spectroscopy shows that also for x > 1, not all Fe 2+ cations are substituted by Ni 2+ cations. The ferrimagnetic behavior, as observed by superconducting quantum interference device magnetometry, is characterized by decreasing saturation magnetization due to the formation of antiferromagnetic NiO parts.

36 MATERIALS SCIENCE↗