Search NASA⌕ Search

SEARCH · Search NASA

Results for “upconversion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Infrared upconversion for astronomical applications

The performance of an upconversion system is examined for observation of astronomical sources in the low to middle infrared spectral range. Theoretical values for the performance parameters of an upconversion system for astronomical observations are evaluated in view of the conversion efficiencies, spectral resolution, field of view, minimum detectable source brightness and source flux. Experimental results of blackbody measurements and molecular absorption spectrum measurements using a lithium niobate upconverter with an argon-ion laser as the pump are presented. Estimates of the expected optimum sensitivity of an upconversion device which may be built with the presently available components are given.

Abbas, M. M.↗

Infrared upconversion for astronomical applications

The performance of an upconversion system is examined for observation of astronomical sources in the low to middle IR spectral range. Theoretical values for the performance parameters of an upconversion system for astronomical observations are evaluated in terms of the conversion efficiencies, spectral resolution, field of view minimum detectable source brightness, and source flux. Experimental results of blackbody measurements and molecular absorption-spectrum measurements using a lithium niobate upconverter with an argon-ion laser as the pump are presented. Estimates are given of the expected optimum sensitivity of an upconversion device that may be built with presently available components.

Abbas, M. M.↗

Infrared upconversion for astronomy

The basic theory of upconversion is presented, along with a brief historical summary of upconversion techniques. Upconverters were used in astronomical studies, but have met with only modest success. Upconversion will become a useful detection method for astronomy only if substantial but perhaps forseeable, improvements can be realized.

Boyd, R. W.↗

Internal CW parametric upconversion

A demonstration of CW parametric upconversion of 3.39-micron IR radiation inside a He-Ne laser's optical cavity is reported. The upconversion was achieved with the aid of a 5145-A argon laser pump and a lithium niobate crystal; the circulating power available inside the pump laser's cavity was used to maximize the efficiency of the upconversion process. Losses associated with the pump blocking filters and with the lithium niobate crystal are discussed. It is concluded that despite the high losses (approximately 12%) associated with the lithium niobate, the highest measured power conversion efficiency of 0.0038 compares favorably with the best CW external conversion efficiency reported to date.

Falk, J.↗

Monitoring Delamination of Thermal Barrier Coatings by Near-Infrared and Upconversion Luminescence Imaging

Previous work has demonstrated that TBC delamination can be monitored by incorporating a thin luminescent sublayer that produces greatly increased luminescence intensity from delaminated regions of the TBC. Initial efforts utilized visible-wavelength luminescence from either europium or erbium doped sublayers. This approach exhibited good sensitivity to delamination of electron-beam physical-vapor-deposited (EB-PVD) TBCs, but limited sensitivity to delamination of the more highly scattering plasma-sprayed TBCs due to stronger optical scattering and to interference by luminescence from rare-earth impurities. These difficulties have now been overcome by new strategies employing near-infrared (NIR) and upconversion luminescence imaging. NIR luminescence at 1550 nm was produced in an erbium plus ytterbium co-doped yttria-stabilized zirconia (YSZ) luminescent sublayer using 980-nm excitation. Compared to visible-wavelength luminescence, these NIR emission and excitation wavelengths are much more weakly scattered by the TBC and therefore show much improved depth-probing capabilities. In addition, two-photon upconversion luminescence excitation at 980 nm wavelength produces luminescence emission at 562 nm with near-zero fluorescence background and exceptional contrast for delamination indication. The ability to detect TBC delamination produced by Rockwell indentation and by furnace cycling is demonstrated for both EB-PVD and plasma-sprayed TBCs. The relative strengths of the NIR and upconversion luminescence methods for monitoring TBC delamination are discussed.

Eldridge, J. I.↗

Tuning Phonon Energies in Lanthanide-doped Potassium Lead Halide Nanocrystals for Enhanced Nonlinearity and Upconversion

Optical applications of lanthanide-doped nanoparticles require materials with low phonon energies to minimize nonradiative relaxation and promote nonlinear processes like upconversion. Heavy halide hosts offer low phonon energies but are challenging to synthesize as nanocrystals. Here, we demonstrate the size-controlled synthesis of low-phonon-energy KPb 2 X 5 (X=Cl, Br) nanoparticles and the ability to tune nanocrystal phonon energies as low as 128 cm -1 . KPb 2 Cl 5 nanoparticles are moisture resistant and can be efficiently doped with lighter lanthanides. Further, the low phonon energies of KPb 2 X 5 nanoparticles promote upconversion luminescence from higher lanthanide excited states and enable highly nonlinear, avalanche-like emission from KPb 2 Cl 5 : Nd 3+ nanoparticles. The realization of nanoparticles with tunable, ultra-low phonon energies facilitates the discovery of nanomaterials with phonon-dependent properties, precisely engineered for applications in nanoscale imaging, sensing, luminescence thermometry and energy conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Triplet-Induced Singlet Oxygen Photobleaches Near-Infrared Dye-Sensitized Upconversion Nanosystems

The rapid photobleaching of near-infrared (NIR) dye-sensitized upconversion nanosystems is one of the crucial problems that has blocked their technological applications. Uncovering the photophysical and photochemical pathways of NIR dyes would help to elucidate the photobleaching mechanism and thereby improve the photostability of the system. Here we investigate the triplet dynamics of NIR dyes and their interaction with triplet oxygen in the typically investigated IR806-sensitized upconversion nanoparticle (UCNP) nanosystem. Low-temperature fluorescence at 77 K provides direct proof of the generation of singlet oxygen ( 1 O 2 ) under 808 nm laser irradiation. Further, mass spectrometry indicates that all three double bonds in the structure of IR806 can be broken in the photochemical process. Coupling IR806 to the surface of UCNPs can accelerate its triplet dynamics, thus producing more 1 O 2 to photocleave IR806. Importantly, we find that the addition of β-carotene can scavenge the generated 1 O 2 , thereby providing a simple method to effectively inhibit photobleaching.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Tuning Phonon Energies in Lanthanide‐doped Potassium Lead Halide Nanocrystals for Enhanced Nonlinearity and Upconversion

Abstract Optical applications of lanthanide‐doped nanoparticles require materials with low phonon energies to minimize nonradiative relaxation and promote nonlinear processes like upconversion. Heavy halide hosts offer low phonon energies but are challenging to synthesize as nanocrystals. Here, we demonstrate the size‐controlled synthesis of low‐phonon‐energy KPb 2 X 5 (X=Cl, Br) nanoparticles and the ability to tune nanocrystal phonon energies as low as 128 cm −1 . KPb 2 Cl 5 nanoparticles are moisture resistant and can be efficiently doped with lighter lanthanides. The low phonon energies of KPb 2 X 5 nanoparticles promote upconversion luminescence from higher lanthanide excited states and enable highly nonlinear, avalanche‐like emission from KPb 2 Cl 5 : Nd 3+ nanoparticles. The realization of nanoparticles with tunable, ultra‐low phonon energies facilitates the discovery of nanomaterials with phonon‐dependent properties, precisely engineered for applications in nanoscale imaging, sensing, luminescence thermometry and energy conversion.

Zhang, Zhuolei↗

Sol–gel Synthesis and Upconversion Luminescent Properties of Yb{sup 3+},Er{sup 3+},Eu{sup 3+} Triply-Doped in YVO{sub 4} Phosphors

Yb{sup 3+},Er{sup 3+},Eu{sup 3+} triply-doped in YVO{sub 4} with varying molar ratio of Er/Eu were synthesized in a sol–gel method with a subsequent heat treatment for the first time. The optimal molar ratio of Er/Eu for the maximum energy transfer efficiency was 1/39. After molar ratio, the influences of different heat treatment temperatures were also researched and the maximal heat temperature was 1300 °C. Besides, the properties of YVO{sub 4}:Yb{sup 3+},Er{sup 3+},Eu{sup 3+} upconversion phosphors were investigated by X-ray diffraction, scanning electron microscopy and photo luminescent spectra, respectively. In sum, XRD results indicate the crystal structure of as-prepared samples, which is the tetragonal phase of YVO{sub 4} with no other diffraction peaks. SEM images show the morphology of as-prepared samples, which are granular-like nanoparticles. PL spectra demonstrate the upconversion luminescence of as-prepared samples, which emit strong green lights (at 525 nm, 550 nm) and slight red lights (at 590 nm, 615 nm, 695 nm) under the NIR irradiation at 980 nm. Two strong green emissions are attributed to the {sup 2}H{sub 11/2}→{sup 4}I{sub 15/2} and {sup 4}S{sub 3/2}→{sup 4}I{sub 15/2} transitions of Er{sup 3+} ions. Meanwhile, three slight red emissions are attributed to the {sup 5}D{sub 0}→{sup 7}F{sub 1}, {sup 5}D{sub 0}→{sup 7}F{sub 2} and {sup 5}D{sub 0}→{sup 7}F{sub 4} transitions of Eu{sup 3+} ions. All in all, the colorful emissions endow YVO{sub 4}:Yb{sup 3+},Er{sup 3+},Eu{sup 3+} phosphors great potential for some applications, such as display devices, bio-labeling and infrared detection.

36 MATERIALS SCIENCE↗

Layer-by-layer assembled PEI-based vector with the upconversion luminescence marker for gene delivery

The upconversion luminescence (UCL) marker based on upconversion nanoparticles (UCNPs) shows unique advantages over traditional fluorescence markers, such as enhanced tissue penetration, better photostability, and less autofluorescence. Herein, we constructed a new UCL gene-delivery nonviral vector via layer-by-layer self-assembly of poly(ethylene imine) (PEI) with UCNPs. To reduce the cytotoxicity of PEI, citric acid (CA) was introduced for aqueous modification, and PEI assembly was introduced on the UCNP surface. Our data show that the nonviral vector for UCL gene-delivery demonstrates excellent photostability, low toxicity, and good stability under physiological or serum conditions and can strongly bind to DNA. Moreover, this UCL PEI-based vector could serve as a promising fluorescent gene-delivery carrier for theranostic applications.

60 APPLIED LIFE SCIENCES↗

Transparent oxyfluoride glass ceramics co-doped with Er{sup 3+} and Yb{sup 3+} - Crystallization and upconversion spectroscopy

Transparent glass ceramics in the system SiO{sub 2}-B{sub 2}O{sub 3}-PbO-CdO-PbF{sub 2}-CdF{sub 2}-YbF{sub 3}-ErF{sub 3} showing infrared to visible anti-Stokes (upconversion) luminescence are studied in the present work. The glass compositions have been optimized in order to reduce the melting temperature and, hence, to obtain laboratory scale samples with good optical quality. Erbium-doped nanoscale Pb{sub 4}Yb{sub 3}F{sub 17} crystals are precipitated in the precursor glasses during annealing at temperatures 30-40 K above T{sub g}. A kinetically self-constrained growth explains the nano sizes of the crystals. Both the Stokes and anti-Stokes luminescence spectra of glasses could be explained with clustering of the Yb{sup 3+} and Er{sup 3+} ions in fluorine-rich regions. At the annealing temperature these regions act as nucleation precursors. The crystal growth further enhances the local concentration of these ions. Consequently, a series of energy transfer and energy cross relaxation processes occurs between adjacent rare earth ions leading to the observed luminescence spectra of the glass ceramics studied. -- Graphical abstract: A highly viscous shell (shown in the picture in dark blue) is build around the growing crystal (white circles). When the shell's T{sub g} approaches the annealing temperature, the crystal growth is fully suppressed for kinetic reasons. The upconversion luminescence, resulting from the simultaneous absorption of two and even three infrared photons, is depicted schematically in the right part of the figure. Display Omitted Highlights: {yields} New oxyfluoride glass compositions with reduced melting temperature are formulated. {yields} The phase Pb{sub 4}Yb{sub 3}F{sub 17} doped with Er{sup 3+} ions crystallizes in these glasses. {yields} A kinetically self-constrained growth explains the nano sizes of the crystals. {yields} Clustering of Yb{sup 3+}, Er{sup 3+} and Pb{sup 2+} ions into fluorine-rich glass regions is observed. {yields} The luminescence of glass-ceramics is consistent with its structure.

36 MATERIALS SCIENCE↗

Enhanced performance of dye-sensitized solar cells based on TiO{sub 2} with NIR-absorption and visible upconversion luminescence

TiO{sub 2} with NIR-absorption and visible upconversion luminescence (UC-TiO{sub 2}) is prepared by a sol-gel method and calcined at 700 Degree-Sign C for 6 h. The material broadens the response region of dye sensitized solar cells (DSSCs) from an ultraviolet-visible region to the whole region of the solar spectrum. It shifts NIR sunlight to visible light which matches the strong absorbing region of the dye (N719). DSSCs based on UC-TiO{sub 2} achieved higher conversion efficiency than that on raw TiO{sub 2}. UC-TiO{sub 2} was mixed with commercial raw TiO{sub 2} as additive, and the short-circuit current density, open-circuit voltage and conversion efficiency of the DSSC reached to the optimum values 13.38 mA/cm{sup 2}, 0.78 V and 6.63% (AM1.5 global), comparing with the blank values: 7.99 mA/cm{sup 2}, 0.75 V and 4.07%, respectively. Also the mechanisms of upconversion by multiphoton absorption and energy transfer processes are interpreted in this paper. - Graphical abstract: By introducing TiO{sub 2} with NIR-absorption and visible up-conversion luminescence into DSSC, a signal reflection was explored from ultra-violet region to visible region, and to near-IR region. Highlights: Black-Right-Pointing-Pointer TiO{sub 2} with NIR-absorption and visible up-conversion luminescence (UC-TiO{sub 2}) was prepared by a sol-gel method. Black-Right-Pointing-Pointer A systematic characterization and analysis was carried out to discuss the mechanism. Black-Right-Pointing-Pointer A significantly enhanced performance of DSSC was explored by using UC-TiO{sub 2} as an additive.

36 MATERIALS SCIENCE↗

Tunable upconversion emission in Ba{sub 2}YF{sub 7}:Yb{sup 3+}/Er{sup 3+} nanocrystals with different Yb{sup 3+} concentration

Graphical abstract: The emission intensity at 520 nm and 540 nm can be tuned by Yb{sup 3+} concentration. - Highlights: • High concentration of Yb{sup 3+} can be doped into Ba{sub 2}YF{sub 7} without a phase change. • The emission intensity at 520 nm and 540 nm can be tuned by Yb{sup 3+} concentration. • The long lifetime of {sup 4}F{sub 9/2} level makes its populating effective. - Abstract: Ba{sub 2}YF{sub 7}:xYb{sup 3+},0.02Er{sup 3+} nanocrystals with different Yb{sup 3+} concentration (x = 0.2, 0.4, 0.6, 0.8, 0.98) were synthesized via a solvothermal method. Their X-ray diffraction patterns reveal that all the samples are cubic phase without phase change at arbitrary Yb{sup 3+} concentration. Upon excitation of 980 nm laser, these nanocrystals display upconversion emission in the green and red spectral regions. The relative emission intensity at these two regions can be tuned by Yb{sup 3+} concentration. To investigate the effect of Yb{sup 3+} ion, the decay times of 650 nm emission were measured and analyzed. Ba{sub 2}YF{sub 7}:0.6Yb{sup 3+},0.02Er{sup 3+} nanocrystals have the longest lifetime and highest emission intensity among all the samples. We concluded the lifetime of {sup 4}F{sub 9/2} level has an effect on its own population and intensity ratio of red and green emission. Our results show Yb{sup 3+} ion can tune the upconversion emission and improve upconverison emission intensity.

36 MATERIALS SCIENCE↗

Fast synthesis of sub-10 nm β-NaYF4:Yb3+, Er3+@NaYF4 core-shell upconversion nanocrystals mediated by oleate ligands

Highlights: • Fast synthesize ultra-small β-NaYF{sub 4}:Yb{sup 3+}, Er{sup 3+} UCNCs with 0 min reaction or down to 5.3 nm. • Highly bright sub-10 nm β-NaYF{sub 4}:Yb{sup 3+}, Er{sup 3+} core-shell NCs were obtained. • OA{sup −} ligands cannot only promote the α-to-β phase transition, but also inhibit the crystal growth. • OA{sup −} ligands manipulated phase transition and size evaluation is also applicable to other UCNCs. - Abstract: We developed a facile approach for the fast synthesis of ultrasmall and monodisperse β-NaYF{sub 4}:Yb{sup 3+}, Er{sup 3+} nanocrystals down to 5.3 nm with the assistant of oleate ligands, based on which the highly bright sub-10 nm β-NaYF{sub 4}:Yb{sup 3+}, Er{sup 3+}@NaYF{sub 4} core-shell nanocrystals with three order of magnitude increased upconversion emission were successfully obtained by a seed-mediated growth method. The reaction time and temperature dependent experimental results implied that the introduciton of extra oleate ligands can both promote the α-to-β phase transition and impeded the crystal growth of NaYF{sub 4}, which is due to the oleate ligand induced orderly arrangement of Y{sup 3+} and capping effect, respectively. It is expected that the oleate ligands mediated phase transition and size evaluation, demonstrated here in NaYF{sub 4}:Yb{sup 3+}, Er{sup 3+} NCs, is also applicable to other lanthanide-doped upconversion nanocrystals.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Upconversion Er-doped TiO2 nanorod arrays for perovskite solar cells and the performance improvement

Highlights: • Er-doped TiO{sub 2} nanorod absorbs IR and converts into visible light. • The introduction of Er could make a positive shift in flat-band potential. • Er-doped TiO{sub 2} solar cells show a 20% increment in the current density. - Abstract: Upconversion erbium-doped rutile TiO{sub 2} nanorod arrays were synthesized by a facile process and applied in perovskite solar cells (PSCs). The structure was characterized by X-ray powder diffraction (XRD). Energy dispersive spectrometer (EDS) and Tauc plot indicated that Er was successfully introduced and changed TiO{sub 2} band gap from 3.00 eV to 3.07 eV. The incorporation of Er shifts the flat band potential positively and enhances the electron density. The Er-doped TiO{sub 2} nanorods have a broad absorption in the infrared light and up-convert it into visible light, which provides a possibility for PSCs to use NIR light for higher performance. A higher photocurrent density (J{sub sc}) of 22.97 mA/cm{sup 2} and a power conversion efficiency (PCE) of 10.6% were obtained, showing 20% and 16.5% increment in J{sub sc} and PCE, respectively, when compared with the un-doped device. The performance improvement was ascribed to the upconversion performance, enhanced electron-injection efficiency and reduced charge recombination.

14 SOLAR ENERGY↗

Preparation of PbF2:Ho3+, Er3+, Yb3+ phosphors and its multi-wavelength sensitive upconversion luminescence mechanism

Highlights: • In this paper, PbF{sub 2}: Ho{sup 3+}, Er{sup 3+}, Yb{sup 3+} phosphors are prepared by a high-temperature solid-state method for the first time. • The crystal structure of the as-prepared phosphors is refined. • The upconversion luminescence properties and mechanism of the as-prepared phosphors are analyzed under excitation of 1064 nm, 1550 nm for the first time. - Abstract: In this paper, PbF{sub 2}: Ho{sup 3+}, Er{sup 3+}, Yb{sup 3+} phosphors are prepared by a high-temperature solid-state method. The crystal structure acquired by X ray powder diffractometer shows that the resultant phosphor is a pure cubic PbF{sub 2} crystal. The upconversion (UC) emission spectra of samples are performed by a fluorescence spectrophotometer coupled with lasers of 980 nm, 1064 nm and 1550 nm, presenting the green emission in the range of 541∼548 nm and red emission in the range of 653–667 nm, corresponding to the excitation path: Ho{sup 3+}: {sup 4}F{sub 9/2}→{sup 4}I{sub 15/2}, Er{sup 3+}: {sup 4}S{sub 3/2}→{sup 4}I{sub 15/2}, Er{sup 3+}: {sup 4}F{sub 9/2}→{sup 4}I{sub 15/2} and Ho{sup 3+}: {sup 5}F{sub 5}→{sup 5}I{sub 8}. Finally, the UC luminescence mechanism is analyzed under excitation of different wavelengths. The result shows that the phosphors have a promising prospect for application in anti-counterfeiting technologies and solar cell field.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Perovskite-Sensitized Upconversion under Operando Conditions

Perovskite-sensitized upconversion (UC) has resulted in near-infrared-to-visible UC at solar-relevant fluxes. However, the successful implementation of UC devices into operating solar cells will result in exposure to similar environmental stressors as for the commercial photovoltaics (PVs), mainly elevated temperatures, and continuous irradiation. In this article, we investigated the effects of these two stressors, heat and light, on the triplet generation process at the perovskite/rubrene interface. Following exposure to both stressors, local discrepancies across the upconversion device were discovered. Here, the first region showed changes to the morphology, and no detectable upconverted emission was observed. Through the combination of optical microscopy and spectroscopy, crystallization of the organic semiconductor layer, degradation of dibenzotetraphenylperiflanthene, and concurrent degradation of the perovskite sensitizer were found. These effects culminate in a reduction in both triplet generation and triplet–triplet annihilation. In the second region, no changes to the morphology were present and visible UC emission was observed following exposure to both stressors. To probe the triplet sensitization process at elevated temperatures, transient absorption spectroscopy was performed. The presence of the excited spin-triplet state of rubrene at 60 °C highlighted successful triplet generation even at elevated temperatures. This work emphasizes the challenges and continued potential for the integration of perovskite-sensitized UC into commercial photovoltaic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sub-20 nm Core–Shell–Shell Nanoparticles for Bright Upconversion and Enhanced Förster Resonant Energy Transfer

Upconverting nanoparticles provide valuable benefits as optical probes for bioimaging and Förster resonant energy transfer (FRET) due to their high signal-to-noise ratio, photostability, and biocompatibility; yet, making nanoparticles small yields a significant decay in brightness due to increased surface quenching. Approaches to improve the brightness of UCNPs exist but often require increased nanoparticle size. Here we present a unique core-shell-shell nanoparticle architecture for small (sub-20 nm), bright upconversion with several key features: (1) maximal sensitizer concentration in the core for high near-infrared absorption, (2) efficient energy transfer between core and interior shell for strong emission, and (3) emitter localization near the nanoparticle surface for efficient FRET. This architecture consists of β-NaYbF 4 (core) @NaY 0.8-x Er x Gd 0.2 F 4 (interior shell) @NaY 0.8 Gd 0.2 F 4 (exterior shell), where sensitizer and emitter ions are partitioned into core and interior shell, respectively. Emitter concentration is varied (x = 1, 2, 5, 10, 20, 50, and 80%) to investigate influence on single particle brightness, upconversion quantum yield, decay lifetimes, and FRET coupling. We compare these seven samples with the field-standard core-shell architecture of β-NaY 0.58 Gd 0.2 Yb 0.2 Er 0.02 F 4 (core) @NaY 0.8 Gd 0.2 F 4 (shell), with sensitizer and emitter ions codoped in the core. At a single particle level, the core-shell-shell design was up to 2-fold brighter than the standard core-shell design. Further, by coupling a fluorescent dye to the surface of the two different architectures, we demonstrated up to 8-fold improved emission enhancement with the core-shell-shell compared to the core-shell design. Finally, we show how, given proper consideration for emitter concentration, we can design a unique nanoparticle architecture to yield comparable or improved brightness and FRET coupling within a small volume.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗