Production of a high altitude land use map and data base for Boston Interim report, Jun. - Dec. 1970
Production of a high altitude urban land use map and data base for Boston sector of megalopolis
Simpson, R. B.↗
SEARCH · Search NASA
Results for “urban mapping”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Urban and regional planning proposal no. Y-10-066-001
The author has identified the following significant results. An investigation is underway to determine the applicability of ERTS-1 data to urban and regional planning problems, using data for East Central Florida. Small scale land use mapping is feasible. Urban and commercial areas are sufficiently distinguishable that ERTS-1 appears to be a useful tool for monitoring urban and commercial growth. Development patterns of cities, growth patterns of cities, and distribution and changes in certain sectors within cities can be analyzed effectively. Digital analysis methods are proving useful.
Hannah, J. W.↗
Data use investigations for applications Explorer Mission A (Heat Capacity Mapping Mission): HCMM's role in studies of the urban heat island, Great Lakes thermal phenomena and radiometric calibration of satellite data
The utility of data from NASA'a heat capacity mapping mission satellite for studies of the urban heat island, thermal phenomena in large lakes and radiometric calibration of satellite sensors was assessed. The data were found to be of significant value in all cases. Using HCMM data, the existence and microstructure of the heat island can be observed and associated with land cover within the urban complex. The formation and development of the thermal bar in the Great Lakes can be observed and quantitatively mapped using HCMM data. In addition, the thermal patterns observed can be associated with water quality variations observed both from other remote sensing platforms and in situ. The imaging radiometer on-board the HCMM satellite is shown to be calibratible to within about 1.1 C of actual surface temperatures. These findings, as well as the analytical procedures used in studying the HCMM data, are included.
Schott, J. R.↗
A study of the utilization of ERTS-1 data from the Wabash River Basin
The author has identified the following significant results. The most significant results were obtained in the water resources research, urban land use mapping, and soil association mapping projects. ERTS-1 data was used to classify water bodies to determine acreages and high agreement was obtained with USGS figures. Quantitative evaluation was achieved of urban land use classifications from ERTS-1 data and an overall test accuracy of 90.3% was observed. ERTS-1 data classifications of soil test sites were compared with soil association maps scaled to match the computer produced map and good agreement was observed. In some cases the ERTS-1 results proved to be more accurate than the soil association map.
Landgrebe, D. A.↗
Peru Health and Air Quality II: Leveraging Earth Observations and Health Data to Map Outbreak Risk and Inform Public Health Interventions for Zoonotic Disease Prevention
Peru's Madre de Dios region is a hotspot for dengue fever and leishmaniasis due to its tropical Amazonian climate. Though treatable, these zoonotic diseases are debilitating for under-resourced communities whose already close proximity to mosquito and sandfly vectors continues to increase via rapid urbanization and deforestation. Peru’s Ministries of Health (MINSA) and Environment (MINAM) are working to better understand the environmental factors amplifying the risk of dengue fever and leishmaniasis transmission. The first term of this project classified the land use and land cover of Madre de Dios’ 11 districts for 2010, 2015, and 2020 and identified a correlation between both diseases and urbanization. Our team expanded this analysis by creating urban-forest edge maps and incorporating climatic and topographic variables with data from Landsat 7 Enhanced Thematic Mapper Plus (ETM+), Landsat 8 Operational Land Imager (OLI), the Global Precipitation Measurement (GPM) Integrated Multi-satellitE Retrievals for GPM (IMERG), and the Shuttle Radar Topography Mission (SRTM). We determined these variables’ impacts on disease incidence by assessing existing literature and running regression models. Dengue fever correlated with urban-forest edge, urban area, slope, temperature, and precipitation. Leishmaniasis primarily correlated with forest-edge area and elevation, but lacking additional statistical significance prevented further work, a decision supported by the literature. Thus, the risk matrix and risk map which we scripted in R to visualize the risk of disease posed to districts alongside health post locations addresses only dengue fever. The results and products will inform MINSA and MINAM in public health interventions, resource distribution, and policy initiatives.
Jennifer Rogers↗
The classification of LANDSAT data for the Orlando, Florida, urban fringe area
Procedures used to map residential land cover on the Orlando, Florida, Urban fringe zone are detailed. The NASA Bureau of the Census Applications Systems Verification and Transfer project and the test site are described as well as the LANDSAT data used as the land cover information sources. Both single-date LANDSAT data processing and multitemporal principal components LANDSAT data processing are described. A summary of significant findings is included.
Walthall, C. L.↗
Digital land use mapping in Oakland County, Michigan
ERTS-1 data for a portion of Oakland County, Michigan was computer processed to produce a map of water, urban areas, wooded areas, and other vegetation. Comparison with RB-57 photography of the area shows a good correspondence of the two sources of data. Preliminary evaluation indicates that this type of four-category map derived from ERTS data will be useful for conceptual studies of large geographic areas in recreational planning.
Sattinger, I. J.↗
Land use of northern megalopolis from ERTS-1 imagery
The author has identified the following significant results. The preliminary map of land use of Rhode Island is believed to be the first urban-type land use map ever made from satellite imagery, and its preparation a significant scientific result for ERTS-1. Eight categories of land use were differentiated at a scale of 1:250,000 including 3 categories of residential area: single family and multiple/mixed urban types, plus a residential and open space rural one. This compares favorably with RB-57 mapping experience in which, mapping at 1:120,000 from photography taken from 60,000 feet, 11 basic categories of land use were discriminated. From ERTS, the urban cores of cities down to 7,000 population, and commercial and industrial sites down to 800 feet square, were consistently discriminated.
Simpson, R. B.↗
Utilization of ERTS-1 data in North Carolina
The author has identified the following significant results. Initial study and interpretation of ERTS-1 imagery indicates its usefulness for regional land use planning purposes in North Carolina. Quarries, many secondary roads, and the existence of urbanization as well as changes in urban areas may be mapped. Differences in spectral response for various parts of the major cities suggests that the type of activity in urbanized areas may be monitored. Geological mapping at a scale of 1:250,000 may be possible. The major unfavorable comment from various organizations and agencies who are potential users has been to the relatively small scale. The imagery is a powerful illustrative tool for the several state agencies cooperating in the investigation.
Welby, C. W.↗
The census cities project: A status report for 1971
Work done by the Census Cities Project during 1971 is outlined. The project is designed to detect urban changes in land resource utilization from remote high altitude aircraft and earth orbiting satellite sensors, aid metropolitan regional planners, and provide urban land use maps for various areas. Land use maps are given of several areas observed during 1971.
Wray, J. R.↗
IFSAR Simulation Using the Shooting and Bouncing Ray Technique
Interferometric Synthetic Aperture Radar (IFSAR) is a technique that allows an automated way to carry out terrain mapping. IFSAR is carried out by first generating a SAR image pair from two antennas that are spatially separated. The phase difference between the SAR image pair is proportional to the topography. After registering the SAR images, the difference in phase in each pixel is extracted to generate an interferogram. Since the phase can only be measured within 2pi radians, phase unwrapping is carried out to extract the absolute phase for each pixel that will be proportional to the local height. While IFSAR algorithm is typically applied to measurement data, it is useful to develop an IFSAR simulator to develop a better understanding of the IFSAR technique. The IFSAR simulator can be used in choosing system parameters, experimenting with processing procedures and mission planning. In this paper we will present an IFSAR simulation methodology to simulate the interferogram based on the shooting and bouncing ray (SBR) technique. SBR is a standard ray-tracing technique used to simulate scattering from large, complex targets. SBR is carried out by shooting rays at the target or scene. At the exit point of each ray, a ray-tube integration is done to find its contribution to the total field. A fast algorithm has been developed for the SBR for simulating SAR images of complex targets. In the IFSAR simulation, we build upon the fast SAR simulation technique. Given the antenna pair configuration, radar system parameters and the geometrical description of the scene, we first simulate two SAR images from each antenna. After post processing the two SAR images, we generate an interferogram. Phase unwrapping is then performed on the interferogram to arrive at the desired terrain map. We will present results from the SBR-based IFSAR simulator. The results will include terrain map reconstruction of urban environments. The reconstruction will be compared to the ground truth to examine the fidelity of the simulation. We will also investigate the effect of multi-bounce scattering in urban environments on phase unwrapping and reconstruction.
Houshmand, Bijan↗
Chronological evaluation of urban growth and area expansion in Aguascalientes, Mexico using remotely sensed and ancillary mapped data
The study describes some efforts to assist the mapping procedure of Mexican towns and cities by focusing on the analysis of urban changes that have occurred in the city of Aguascalientes. To evaluate urban growth trends in Aguascalientes, historic maps of land cover, aerial photography, and SPOT data were reviewed between the period of 1857 and 1988 to determine urban boundaries. Additional analyses focused on identifying the extent and pattern of growth in reference to urban development plans initiated in 1978, and on assessing the impact of relocating people and industry after the Mexico City earthquake. Results from the study indicate a steady growth in areal expansion and population in the Aguascalientes area between 1978 and 1988.
Falquier, Leticia G.↗
Rhode Island Ecological Conservation: Methods for Monitoring Rhode Island Habitats: Contributing to a Framework for Targeted Conservation and Management
Global avian population decline since the 1970s is largely attributable to habitat loss and degradation from anthropogenic disturbances. NASA DEVELOP’s Rhode Island Ecological Conservation team partnered with the Audubon Society of Rhode Island to compute land use land cover (LULC) maps of Rhode Island to aid in the conservation of the state’s 140 bird species. This project aimed to support the partner’s land acquisition strategies with updated and specific LULC classifications showing potential bird-habitat locations across the state. We incorporated remotely sensed data from Landsat 8 and 9 Operational Land Imager (OLI) into LULC maps using unsupervised classification techniques in ArcGIS Pro and supervised classification in Google Earth Engine. We generated six land classifications for 2023, which showed land cover dominated by upland habitats (forests, scrub/shrub, and grasslands), followed by development. We used TerrSet’s Land Change Modeler to forecast LULC change through 2043, using 2011 and 2021 National Land Cover Database (NLCD) land cover maps derived from Landsat 8 and 9 imagery. Project results suggest that non-urban upland and wetland habitats will decrease over time, while development will continue to encroach on non-urban avian habitats. Our maps and associated data will allow for more efficient land acquisition and management efforts to support avian habitat conservation across Rhode Island. Our study shows that data acquisition and processing from open data sources is feasible and further analysis can be done through GIS classification tools. More analysis is needed beyond this study to obtain more detailed land cover maps, though Audubon can aid its targeted conservation efforts with our current, historic, and forecasted LULC maps.
Remote sensing↗
The use of LANDSAT data to monitor the urban growth of Sao Paulo Metropolitan area
Urban growth from 1977 to 1979 of the region between Billings and the Guarapiranga reservoir was mapped and the problematic urban areas identified using several LANDSAT products. Visual and automatic interpretation techniques were applied to the data. Computer compatible tapes of LANDSAT multispectral scanner data were analyzed through the maximum likelihood Gaussian algorithm. The feasibility of monitoring fast urban growth by remote sensing techniques for efficient urban planning and control is demonstrated.
Dejesusparada, N.↗
CARETS: A prototype regional environmental information system. Volume 6: Cost, accuracy and consistency comparisons of land use maps made from high-altitude aircraft photography and ERTS imagery
Accuracy analyses for the land use maps of the Central Atlantic Regional Ecological Test Site were performed for a 1-percent sample of the area. Researchers compared Level II land use maps produced at three scales, 1:24,000, 1:100,000, and 1:250,000 from high-altitude photography, with each other and with point data obtained in the field. They employed the same procedures to determine the accuracy of the Level I land use maps produced at 1:250,000 from high-altitude photography and color composite ERTS imagery. The accuracy of the Level II maps was 84.9 percent at 1:24,000, 77.4 percent at 1:100,000, and 73.0 percent at 1:250,000. The accuracy of the Level I 1:250,000 maps produced from high-altitude aircraft photography was 76.5 percent and for those produced from ERTS imagery was 69.5 percent. The cost of Level II land use mapping at 1:24,000 was found to be high ($11.93 per km 2 ). The cost of mapping at 1:100,000 ($1.75) was about 2 times as expensive as mapping at 1:250,000 ($.88), and the accuracy increased by only 4.4 percent. Level I land use maps, when mapped from high-altitude photography, were about 4 times as expensive as the maps produced from ERTS imagery, although the accuracy is 7.0 percent greater. The Level I land use category that is least accurately mapped from ERTS imagery is urban and built-up land in the non-urban areas; in the urbanized areas, built-up land is more reliably map
Accuracy↗
Radio phase characteristics of terrain from multipolarized synthetic aperture radar data
Recent advances in digital data acquisition and signal processing technology permit simultaneous measurement of the complex (amplitude and phase) radar backscatter from several polarization-diverse antennas. While absolute phase mesurements remain to be analyzed in detail. The differential phase of signals polarized parallel and perpendicular to the plane of incidence provide information on the scattering mechanisms that dominate the interaction of the radio waves with the terrain. Analysis of phase backscatter maps from a typical urban area yields a bimodal distribution with the two peaks separated by approximately 180 degrees, highly indicative of a dominant simple geometric one bounce-two bounce mechanism. Some maps of agricultural areas exhibit a similar distribution, however, other agricultural areas yield a distribution that, while still bimodal, consists of two peaks separated by about 110 deg. Still other agricultural areas exhibit a more complex distribution. All of the observed phase shifts appear to be independent of incidence angle from at least 20 deg to 55 deg, therefore the 110 degree shifts are inconsistent with both the geometric model used for the urban area and with common dielectric slab models.
Zebker, H. A.↗
Assessing Urban Heat in the Cincinnati and Covington Area to Inform Local Decision-Makers and Environmental Justice Initiatives
The Urban Heat Island effect is a phenomenon characterized by urban areas experiencing temperatures that are, on average, warmer than surrounding suburban and rural regions. Urban Heat Islands are fueled by expansive impervious surfaces, vehicle emissions, and insufficient urban green space. Densely populated urban centers like the Cincinnati, Ohio and Covington, Kentucky area can experience negative health impacts due to the Urban Heat Island. NASA DEVELOP partnered with Groundwork USA and Groundwork Ohio River Valley to combine environmental education and outreach with technical capacity building in NASA Earth observations. The DEVELOP team used Landsat 5 TM and ISS ECOSTRESS to calculate daytime and nighttime land surface temperature anomalies. The team found that the Cincinnati and Covington area was 8.32°F warmer during the day and 4.97°F warmer at night compared to non-urban areas. The team also ran the Natural Capital Project InVEST Urban Cooling Model to map a heat mitigation index for the study area. The heat mitigation index models the cooling capacity of each pixel and the effect of green spaces on the pixel’s ability to mitigate heat. Results show which communities are most vulnerable to impacts of increased urban heat. The team also assessed alternative tree canopy scenarios with the InVEST model to better understand the effectiveness of potential heat mitigation strategies. Increasing tree canopy cover by 25% in urbanized land cover types was found to reduce mean temperature across the study area by 0.87°F. Combining these results with work from Groundwork’s Climate Safe Neighborhoods program highlights the relationship between extreme heat and historical-race based housing practices in the region. Results provide partners at Groundwork with refined methodologies to support future education and outreach, as well as increase future capacity to NASA Earth observations.
Celeste Gambino↗
Mapping Wildfires In Nearly Real Time
Airborne infrared-sensing system flies over wildfire as infrared detector in system and navigation subsystem generate data transmitted to firefighters' camp. There, data plotted in form of map of fire, including approximate variations of temperature. System, called Firefly, reveals position of fires and approximate thermal intensities of regions within fires. Firefighters use information to manage and suppress fires. Used for other purposes with minor modifications, such as to spot losses of heat in urban areas and to map disease and pest infestation in vegetation.
Nichols, Joseph D.↗