Search NASA⌕ Search

SEARCH · Search NASA

Results for “variability analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Crystal structures and phase transitions in Sr doped Ba{sub 2}InTaO{sub 6} perovskites

The crystal structures of the double perovskites of the type Ba{sub 2−x}Sr{sub x}InTaO{sub 6} have been studied by synchrotron X-ray and neutron powder diffraction methods. The structures are based on ordered array of the tilted InO{sub 6} and TaO{sub 6} octahedra, with the Ba/Sr cations being completely disordered. The structure evolves from cubic to monoclinic Fm3{sup ¯}m→{sup x∼0.6}I4/m→{sup x∼1.2}I2/m→{sup x∼1.6}P2{sub 1}/n. The changes in the symmetry induced by replacing the Ba with Sr have been identified by a symmetry-mode analysis. Variable temperature S-XRD studies of selected examples have shown that heating the samples induces the same sequence of transitions observed in the composition dependent studies. - Graphical abstract: The evolution of the structure of the B-site ordered perovskites has been determined by high resolution powder diffraction. The nature of the transitions are probed by examination of the symmetry-adapted modes. Display Omitted - Highlights: • Synthesis of Ba{sub 2−x}Sr{sub x}InTaO{sub 6} cation ordered perovskites. • Synchrotron X-ray and neutron diffraction structural studies of Ba{sub 2−x}Sr{sub x}InTaO{sub 6}. • Phase transitions in Ba{sub 2−x}Sr{sub x}InTaO{sub 6}. • Symmetry-adapted mode analysis of phase transitions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Use of XRF to characterize pre-Hanford orchards in the 100-OL-1 operable unit - 15717

Prior to 1943, Hanford site included several small towns with approximately 5,000 acres of orchards; at the time lead arsenate (PbHAsO{sub 4}) was the most commonly used pesticide. High concentration of lead and arsenic have been recorded where trees and stumps are still visible. Pre-Hanford orchards have been designated as 100-OL-1 Operable Unit. An Optimization study evaluated optimal counting time and position of the XRF from soils collected at the site. A Pilot Study included the evaluation of a field portable x-ray fluorescence (XRF) analyzer determining if performance results meet quality assurance criteria for cleanup. XRF has only previously been used as a screening tool. Four Decision Units (DUs) are to be analyzed: Ol-14. OL-32. OL-IU6-4 and OL-FR2-1. The DUs vary in size and have had distinct historic activities; such as 46.4 acres OL-14 having a military camp in the 1950's unlike OL-FR2-1 having been disturbed as it is near the F area reactor. Together the DUs provide an adequate representation of the Operable Unit. Screening criteria for lead (250 mg/kg) and arsenic (20 mg/kg). Six samples were collected ranging above, at, and below the screening criteria of 250 mg/kg for Pb and 20 mg/kg for As at the Decision Units OL-14 and OL-IU6-4, and labeled respectively. Samples were hand sieved, homogenized and placed in sample cups. Three replicates were prepared for each sample. Each sample cup was analyzed 3 times for 30 sec. A Standard Reference Material (SRM) was analyzed after every 20 readings. Three samples were selected for 15, 30, 45, 60, 90, 120, 150 and 180 second fixed and variable analysis. Two transects at OL-14, and one at OL-IU6-4 were created by selecting locations 90. around ground zero at distances of 0.5, 1, 2, 4, 8 and 12 feet (16 ft for OL-14). Locations were scanned in triplicate for 60 seconds each. 4 Decision Units spanning roughly 370 acres were chosen to represent 100-OL-1 Operable Unit. 40 locations within each DU were selected using Visual Sample Plan (VSP) with a random start and systematic grid pattern. Each location would be analyzed with 3 replicates and a 60 second count time. The Standard Reference Material (SRM) and blank are analyzed after every 20 counts to ensure accuracy. Data is extracted from XRF to be implemented in GIS for visual representation of site with 1943 and 2013 aerial imagery. Discussion/Conclusion: - XRF provided a good indication of precision and accuracy relative to ICP with a linear correlation R{sup 2} value higher than anticipated at .9735; - MDL proved the detection limit is significantly lower than the screening criteria; - When comparing results from the first 40 locations of OL-14 to the total 80 locations of OL-14, the same variability was seen; - We expect high concentrations of Pb and As to be where past orchards are present though this does not occur as all sites. Significance: - XRF is competent for decision making as values fall within ±20% ICP data; - The highest concentrations are not where expected, which may be an issue for sites outside of Hanford that have had more development; - The size of the DU does not affect the number of samples measured. Future Work: - Verification and validation of the XRF Data (QA/QC); - Revise conceptual site model; - Statistical evaluations to investigate: Estimation of variability in surface soils, appropriate size for DU, and sample size per DU; - Coordinating sample results through CORE; - Displaying sample results in PHOENIX (GIS tool)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Mercury Speciation via Diffusive Gradients Thin-Films Technology

Objectives: Develop and test various diffusive gradient in thin films (DGT) samplers for mercury - SRNL is developing reactive DGTS (rDGTs). Test chemistry to differentiate methylmercury from total and/or inorganic mercury in environmental samples. Fabricate and test rDGT samplers for deployment. Deploy the rDGTs in variable settings. Mercury is a persistent-bioaccumulative-toxic environmental pollutant. Mercury exists in different species such as elemental, inorganic, and methyl. Mercury speciation determine mercury behavior and toxicity. For example, methylmercury strongly accumulates in biota such as fish resulting in potential human health impacts. DGTs are innovative samplers to measure water concentration by diffusion and capture. Types of Hg DGTs used: Total Hg, Inorganic Hg, and Methyl Hg. Deployment Sites: Upper Three Runs, Lower Three Runs, Steele Creek, East Fork Poplar Creek (SRNL Sites), Horizons Creek, NOA Creek, Bruners Creek (ORNL Sites). DGT concentration estimates closely matched alternative measurements for soluble mercury at each Oak Ridge site - DGTs did not respond to particulate mercury. DGTs provide a representative measure for biota uptake since they are left out longer which allows for an average exposure concentration. DMA-80 provided an efficient and quick analysis. Variability in site location made a difference in Hg species. DGT preparations and sampling wasn't as quick and simple as microcolumn technology. Copper reagent degraded agarose gel - more work and cleaner data are needed to assess speciation in rDGTs. Future Work: Use cross-linked polyacrylamide for the collection layer for a stronger plastic. Make a copper diffusion layer without agarose. Test copper separation in lab using realistic stream conditions such as high organic carbon.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Spectroscopic classification, variability, and SED of the Fermi -detected CSS 3C 286: the radio-loudest NLS1 galaxy?

ABSTRACT 3C 286 is a well-known calibrator source in radio astronomy. It is also one of very few compact steep-spectrum (CSS) sources detected in γ-rays. Here, we perform a detailed spectroscopic and variability analysis and present the first quasi-simultaneous optical to X-ray spectral energy distribution (SED) in order to reveal physical mechanisms that dominate its emission at different wavelengths, and arrive at a reliable optical source classification. The first main result of our study reveals several pitfalls when applying simple broad- or narrow-line Seyfert 1 (BLS1 or NLS1) classification criteria that only look at the [O iii]–Hβ complex. [O iii] and Hβ can be dominated by the same outflow components, in which case full width at half-maximum (Hβ) is no reliable classification criterion, and extinction by intrinsic or intervening material can make the highest velocity Hβ component undetectable. After careful combination of all information from ultraviolet (UV)–optical spectra along with multiwavelength data, we confirm that 3C 286 can be classified as NLS1 galaxy, with line properties and supermassive black hole mass (of order 108 M⊙ and accreting near the Eddington limit) close to the BLS1 regime, making it an important borderline object. The quasi-simultaneous SED taken with Swift shows a sharp rise in the optical–UV, implying the presence of a strong accretion-disc component with extreme UV excess, consistent with emission-line diagnostics. Finally, we report the discovery of X-ray variability of 3C 286, plausibly dominated by jet emission, and variable by at least a factor of ∼4. This result suggests to exercise caution when using 3C 286 as radio calibrator in high-resolution radio very long baseline interferometry observations.

Yao, Su↗

Structural and magnetic characterization of three tetranuclear Cu(II) complexes with face-sharing-dicubane/double-open-cubane like core framework

Three novel tetranuclear copper(II) complexes namely [Cu{sub 4}(L{sup 1}){sub 4}]∙2(dmf) (1), [Cu{sub 4}(L{sup 1}){sub 4}] (2) and [Cu{sub 4}(L{sup 2}){sub 2}(HL{sup 2}){sub 2}(H{sub 2}O){sub 2}]∙2(ClO{sub 4})·6(H{sub 2}O) (3) (H{sub 2}L{sup 1}, (E)−2-((1-hydroxybutan-2-ylimino)methyl)phenol; H{sub 2}L{sup 2}, (E)−2-((1-hydroxybutan-2-ylimino)methyl)−6-methoxyphenol)) were synthesized from the self-assembly of copper(II) perchlorate and the tridentate Schiff base ligands. The structural determination reveals that crystallizes in the monoclinic system with space group C2/c, whereas both the and crystallize in the triclinic system with space group P-1. and possess face-sharing dicubane core, on the other hand complex 3 has double open cubane core structure. The copper(II) ions in the cubane core are in distorted square planar geometries, and weak π…π and C–H…π interactions lead to formation of a 2D supramolecular architecture for and . At room temperature and , exhibit fluorescence with a quantum yield (Φ{sub s}) of 0.47, 0.49 and 0.38, respectively. Variable temperature magnetic susceptibility measurements in the range 2–300 K indicate an overall weak antiferromagnetic exchange coupling in all complexes. The PHI program was used to study their magnetic behaviour. In agreement with their face-sharing dicubane structure, a Hamiltonian of the type H =– J{sub 1}(S{sub 1}S{sub 2}+S{sub 1}S{sub 2’}+S{sub 1'}S{sub 2}+S{sub 1'}S{sub 2’}) – J{sub 2}S{sub 1}S{sub 1’}, where S{sub 1} = S{sub 1’} = S{sub 2} = S{sub 2’} = S{sub Cu} =1/2, was used for studying and . Simulations performed suggest magnetic exchange constants with values close to J{sub 1} =−20 cm{sup −1} and J{sub 2} =0 cm{sup -1} for these complexes. On the other hand, the spin Hamiltonian H =– J{sub 1}(S{sub 1}S{sub 4}+S{sub 2}S{sub 3}) – J{sub 2}(S{sub 1}S{sub 3}+S{sub 2}S{sub 4}) – J{sub 3}S{sub 1}S{sub 2}, where S{sub 1} = S{sub 2} = S{sub 3} = S{sub 4} = S{sub Cu} =1/2, was used to study the magnetic behaviour of the double open cubane core of and a good agreement between the experimental and simulated results was found by using the parameters g{sub 1} = g{sub 2} =2.20, g{sub 3} = g{sub 4} =2.18, J{sub 1} =−36 cm{sup -1}, J{sub 2} =−44 cm{sup -1} and J{sub 3} =0 cm{sup -1}. - Graphical abstract: Tetranuclear Cu(II) complexes with face-sharing-dicubane / double-open-cubane like core frameworks were synthesized and characterized by crystal structure and magnetic analysis. Variable temperature magnetic properties corroborate with their structural arrangement. - Highlights: • Novel tetranuclear copper(II) complexes have been structurally characterized. • Complexes possess face-sharing dicubane/double open cubane core structures. • Variable temperature magnetic measurements reveal antiferromagnetic coupling. • PHI program was used to explain the observed magnetic properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The ionic conductivity and local environment of cations in Bi{sub 9}ReO{sub 17}

The influence of temperature on the structure of Bi{sub 9}ReO{sub 17} has been investigated using differential thermal analysis, variable temperature X-ray diffraction and neutron powder diffraction. The material undergoes an order-disorder transition at {approx}1000 K on heating, to form a fluorite-related phase. The local environments of the cations in fully ordered Bi{sub 9}ReO{sub 17} have been investigated by Bi L{sub III}- and Re L{sub III}-edge extended X-ray absorption fine structure (EXAFS) measurements to complement the neutron powder diffraction information. Whereas rhenium displays regular tetrahedral coordination, all bismuth sites show coordination geometries which reflect the importance of a stereochemically active lone pair of electrons. Because of the wide range of Bi-O distances, EXAFS data are similar to those observed for disordered structures, and are dominated by the shorter Bi-O bonds. Ionic conductivity measurements indicate that ordered Bi{sub 9}ReO{sub 17} exhibits reasonably high oxide ion conductivity, corresponding to 2.9x10{sup -5} {Omega}{sup -1} cm{sup -1} at 673 K, whereas the disordered form shows higher oxide ion conductivity (9.1x10{sup -4} {Omega}{sup -1} cm{sup -1} at 673 K). - Graphical abstract: The structure of Bi{sub 9}ReO{sub 17} is discussed and related to the ionic conductivity of the ordered and disordered forms.

36 MATERIALS SCIENCE↗

A machine learning model for predicting the minimum miscibility pressure of CO 2 and crude oil system based on a support vector machine algorithm approach

CO 2 enhanced oil recovery (EOR) is a potential way for carbon capture, utilization and storage (CCUS). Though, the effect of CO 2 injection is greatly influenced by the reservoir conditions. Typically, Minimum miscible pressure (MMP) is selected as one of the key parameters for the screening and evaluation of prospective CO 2 flooding. Conventional slim tube test is both accurate and widely accepted but it is inefficient. Existing empirical formulas for MMPs are easy to be used but have been proved inaccurate and unreliable. Machine learning-based methods have great advantages in predicting MMP. However, only predication accuracy is discussed for most models without the screening of the main control factors and further validation of the model reliability. In this paper, a new prediction model based on support vector machine (SVM) was developed for pure/impure CO 2 and crude oil system. This study was based on 147 sets of MMP data from the literature with full information on reservoir temperature, oil composition and gas composition. The main control factors were screened by several statistical methods. Unlike the conventional prediction models that verified by only prediction accuracy, learning curve and single factor control variable analysis are further validated to obtain the optimum model.

02 PETROLEUM↗

Evaluation of B7-H3 Expression as a Biomarker of Biochemical Recurrence After Salvage Radiation Therapy for Recurrent Prostate Cancer

Purpose: The ability to predict which men will experience biochemical recurrence (BCR) after salvage radiation therapy (SRT) for recurrent prostate cancer (PCa) remains less than optimal. Related to this, novel targets for adjuvant therapies are also lacking. Here, we evaluate the association of B7-H3 expression in primary PCa tumors and BCR after SRT. Methods and Materials: We identified 148 patients who received SRT between July 1987 and July 2003. Expression of B7-H3 in primary PCa tumors was detected using a monoclonal antibody. The staining levels were quantified via visual assessment and categorized as weak, moderate, or marked. Relative risks (RRs) and 95% confidence intervals (CIs) from Cox proportional hazards models were used to examine the association between B7-H3 staining and BCR. Results: With a median follow-up of 6.2 years (minimum, 0.6; maximum, 14.7), 78 patients (53%) experienced BCR. In single-variable analysis, there was evidence of an increased risk of BCR for patients with moderate (RR, 2.25; 95% CI, 1.24-4.09, p = 0.008) and marked (RR, 4.40, 95% CI, 2.29-8.43, p < 0.001) B7-H3 staining compared with weak staining. This evidence remained, albeit weaker, after adjustment for additional clinicopathologic covariates (RR, 1.82, p = 0.068 [moderate vs. weak]; RR, 2.87, p = 0.003 [marked vs. weak]). Conclusion: This is the first report that higher tumor B7-H3 staining in primary PCa tumors is associated with increased risk of BCR after SRT. Future studies involving larger numbers of patients are required to validate these results and also to explore possible means of targeting B7-H3 in an adjuvant setting.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

A Unified Modeling Framework to Advance Biofuel Production from Microalgae

Modeling efforts to understand the financial implications of microalgal biofuels often assume a static basis for microalgae biomass composition and cost, which has constrained cultivation and downstream conversion process design and limited in-depth understanding of their interdependencies. For this work, a dynamic biological cultivation model was integrated with thermo-chemical/biological unit process models for downstream biorefineries to increase modeling fidelity, to provide mechanistic links among unit operations, and to quantify minimum product selling prices of biofuels via techno-economic analysis. Variability in design, cultivation, and conversion parameters were characterized through Monte Carlo simulation, and sensitivity analyses were conducted to identify key cost and fuel yield drivers. Cultivating biomass to achieve the minimum biomass selling price or to achieve maximum lipid content were shown to lead to suboptimal fuel production costs. Depending on biomass composition, both hydrothermal liquefaction and a biochemical fractionation process (combined algal processing) were shown to have advantageous minimum product selling prices, which supports continued investment in multiple conversion pathways. Ultimately, this work demonstrates a clear need to leverage integrated modeling platforms to advance microalgae biofuel systems as a whole, and specific recommendations are made for the prioritization of research and development pathways to achieve economical biofuel production from microalgae.

09 BIOMASS FUELS↗

Plasmonic trace sensing below the photon shot noise limit

Plasmonic sensors are important detectors of biochemical trace compounds, but those that utilize optical readout are approaching their absolute limits of detection as defined by the Heisenberg uncertainty principle in both differential intensity and phase readout. However, the use of more general minimum uncertainty states in the form of squeezed light can push the noise floor in these sensors below the shot noise limit (SNL) in one analysis variable at the expense of another. Here, we demonstrate a quantum plasmonic sensor whose noise floor is reduced below the SNL in order to perform index of refraction measurements with sensitivities unobtainable with classical plasmonic sensors. The increased signal-to-noise ratio can result in faster detection of analyte concentrations that were previously lost in the noise. As a result, these benefits are the hallmarks of a sensor exploiting quantum readout fields in order to manipulate the limits of the Heisenberg uncertainty principle.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

PKS 2155-304 in July 2006: H.E.S.S. results and simultaneous multi-wavelength observations

The high-frequency-peaked BL Lac PKS 2155-304 is one of the brightest and best-studied VHE {gamma}-ray sources in the southern hemisphere. The High Energy Stereoscopic System (H.E.S.S.) has monitored PKS 2155-304 in 2006 and a multi-wavelength campaign involving X-ray, optical and radio observatories was triggered by the detection of an active state in July 2006, followed by the detection of two extraordinary flares on July, 28th and 30th, with peak fluxes {approx}100 times the usual values. We present results from the spectral and flux variability analysis of the VHE and simultaneous X-ray observations with Chandra during the second flare, as well as the detailed evolution of the VHE flux of PKS 2155-304 observed by H.E.S.S. in 2006. A study of flux correlations in the different frequency ranges during the second flare and the adjacent nights is discussed. We also present an interpretation of the active state of PKS 2155-304 in the framework of synchrotron self-Compton emission.

79 ASTRONOMY AND ASTROPHYSICS↗

MULTI-EPOCH MULTI-WAVELENGTH STUDY OF AN ULTRALUMINOUS X-RAY SOURCE IN M101: THE NATURE OF THE SECONDARY

Ultraluminous X-ray sources are non-nuclear point sources in external galaxies with L{sub X} = 2 x 10{sup 39}-10{sup 41} erg s{sup -1}, and thus are possibly stellar black holes with special radiation mechanisms or intermediate mass black holes of 100-10{sup 5} M {sub sun}. To measure their dynamical mass, one needs to identify the secondary in the optical followed by photometric and spectroscopic monitoring. The counterpart light is usually contaminated, sometimes even dominated, by the X-ray irradiated accretion disk, which complicates the derivation of the properties of the secondary itself. Here, we report a study on M101-ULX1 with 26 Hubble Space Telescope (HST) observations and 33 X-ray observations over 16 years. There were three multi-band HST observations at different optical states over eight years, the spectral energy distributions (SEDs) of which cannot be fitted by the previously claimed secondary of a B supergiant or any other single star. All SEDs can be decomposed into the same stellar component plus a second component due to X-ray irradiation with different contributions at different optical states. The secondary in ULX1 is most likely a WR star as revealed by the SED decompositions and confirmed by the presence of He II lambda4686 emission in the counterpart spectrum. Five X-ray outbursts and two optical peaks are revealed from X-ray and optical light curves, and optical peaks are identified as the optical response to X-ray outbursts. The correlated optical and X-ray variability analysis is suggestive of ellipsoidal modulation with a half-amplitude of 0.05 mag and a period in the range of 1.5-4.5 days. Future photometric and spectroscopic observations are required to confirm the orbital period and measure the dynamical mass for ULX1.

79 ASTRONOMY AND ASTROPHYSICS↗

VARIATIONS OF ABSORPTION TROUGHS IN THE QUASAR SDSS J125216.58+052737.7

In this work, we analyze the spectra of quasar J125216.58+052737.7 (z {sub em} = 1.9035) which was observed by SDSS-I/II on 2003 January 30 and by BOSS on 2011 April 2. Both the continuum and the absorption spectra of this quasar show obvious variations between the two epochs. In the SDSS-I/II spectrum, we detect 8 C IV λλ1548,1551 absorption systems, which are detected at z {sub abs} = 1.9098, 1.8948, 1.8841, 1.8770, 1.8732, 1.8635, 1.8154, and 1.7359, respectively, and one Mg II λλ2796,2803 absorption system at z {sub abs} = 0.9912. Among these absorption systems, two C IV λλ1548,1551 absorption systems at z {sub abs} = 1.9098 and 1.7359 and the Mg II λλ2796,2803 absorption system are imprinted on the BOSS spectrum as well, and have similar absorption strengths when compared to those measured from the SDSS-I/II spectrum. Three C IV λλ1548,1551 absorption systems at z {sub abs} = 1.8948, 1.8841, and 1.8770 are also detected in the BOSS spectrum, while their absorption strengths are much weaker than those measured from the SDSS-I/II spectrum; three systems at z {sub abs} = 1.8732, 1.8635, and 1.8154 disappeared from the BOSS spectrum. Based on the variability analysis, the absorption systems that disappeared and weakened are likely to be intrinsic to the quasar. If these intrinsic absorption gases are blown away from the central region of the quasar, with respect to the quasar system, the absorption systems that disappeared would have separation velocities of 3147 kms{sup –1}, 4161 km s{sup –1}, and 9241 km s{sup –1}, while the absorption systems that weakened would have separation velocities of 900 km s{sup –1}, 2011 km s{sup –1}, and 2751 km s{sup –1}. Well-coordinated variations of the six C IV λλ1548,1551 absorption systems that disappeared and weakened, occurring on a timescale of 1026.7 days at the quasar rest frame, can be interpreted as a result of global changes in the ionization state of the absorbing gas.

79 ASTRONOMY AND ASTROPHYSICS↗

SIMULTANEOUS MULTIWAVELENGTH OBSERVATIONS OF MAGNETIC ACTIVITY IN ULTRACOOL DWARFS. IV. THE ACTIVE, YOUNG BINARY NLTT 33370 AB (= 2MASS J13142039+1320011)

We present multi-epoch simultaneous radio, optical, Hα, UV, and X-ray observations of the active, young, low-mass binary NLTT 33370 AB (blended spectral type M7e). This system is remarkable for its extreme levels of magnetic activity: it is the most radio-luminous ultracool dwarf (UCD) known, and here we show that it is also one of the most X-ray luminous UCDs known. We detect the system in all bands and find a complex phenomenology of both flaring and periodic variability. Analysis of the optical light curve reveals the simultaneous presence of two periodicities, 3.7859 ± 0.0001 and 3.7130 ± 0.0002 hr. While these differ by only ∼2%, studies of differential rotation in the UCD regime suggest that it cannot be responsible for the two signals. The system's radio emission consists of at least three components: rapid 100% polarized flares, bright emission modulating periodically in phase with the optical emission, and an additional periodic component that appears only in the 2013 observational campaign. We interpret the last of these as a gyrosynchrotron feature associated with large-scale magnetic fields and a cool, equatorial plasma torus. However, the persistent rapid flares at all rotational phases imply that small-scale magnetic loops are also present and reconnect nearly continuously. We present a spectral energy distribution of the blended system spanning more than 9 orders of magnitude in wavelength. The significant magnetism present in NLTT 33370 AB will affect its fundamental parameters, with the components' radii and temperatures potentially altered by ∼+20% and ∼–10%, respectively. Finally, we suggest spatially resolved observations that could clarify many aspects of this system's nature.

79 ASTRONOMY AND ASTROPHYSICS↗

A search for ultrahigh-energy neutrinos associated with astrophysical sources using the third flight of ANITA

The ANtarctic Impulsive Transient Antenna (ANITA) long-duration balloon experiment is sensitive to interactions of ultrahigh-energy (E>10 18 eV) neutrinos in the Antarctic ice sheet. The third flight of ANITA, lasting 22 days, began in December 2014. We develop a methodology to search for energetic neutrinos spatially and temporally coincident with potential source classes in ANITA data. This methodology is applied to several source classes: the potential IceCube-identified neutrino sources TXS 0506+056 and NGC 1068, flaring high-energy blazars reported by the Fermi All-Sky Variability Analysis, gamma-ray bursts, and supernovae. Among searches within the five source classes, one candidate was identified as associated with SN 2015D, although not at a statistically significant level. Finally, we proceed to place upper limits on the source classes. We further comment on potential application of this methodology to more sensitive future instruments.

79 ASTRONOMY AND ASTROPHYSICS↗

Accelerating flux balance calculations in genome-scale metabolic models by localizing the application of loopless constraints

Abstract Background Genome-scale metabolic network models and constraint-based modeling techniques have become important tools for analyzing cellular metabolism. Thermodynamically infeasible cycles (TICs) causing unbounded metabolic flux ranges are often encountered. TICs satisfy the mass balance and directionality constraints but violate the second law of thermodynamics. Current practices involve implementing additional constraints to ensure not only optimal but also loopless flux distributions. However, the mixed integer linear programming problems required to solve become computationally intractable for genome-scale metabolic models. Results We aimed to identify the fewest needed constraints sufficient for optimality under the loopless requirement. We found that loopless constraints are required only for the reactions that share elementary flux modes representing TICs with reactions that are part of the objective function. We put forth the concept of localized loopless constraints (LLCs) to enforce this minimal required set of loopless constraints. By combining with a novel procedure for minimal null-space calculation, the computational time for loopless flux variability analysis (ll-FVA) is reduced by a factor of 10–150 compared to the original loopless constraints and by 4–20 times compared to the current fastest method Fast-SNP with the percent improvement increasing with model size. Importantly, LLCs offer a scalable strategy for loopless flux calculations for multi-compartment/multi-organism models of large sizes, for example, shortening the CPU time for ll-FVA from 35 h to less than 2 h for a model with more than104 reactions. Availability and implementation Matlab functions are available in the Supplementary Material or at https://github.com/maranasgroup/lll-FVA Supplementary information Supplementary data are available at Bioinformatics online.

Chan, Siu H. J. (ORCID:000000027707656X)↗

CP-violation parameters from decay rates of B{sup {+-}}{yields}DK{sup {+-}}, D{yields}multibody final states

We describe a method for measuring CP-violation parameters from which the Cabibbo-Kobayashi-Maskawa angle {gamma} may be extracted. The method makes use of the total decay rates in B{sup {+-}}{yields}DK{sup {+-}} decays, where the neutral D meson decays to multibody final states. We analyze the error of the method using experimental CP-violation analysis variables that enable straightforward sensitivity comparison with other methods for extracting {gamma}, and discuss the use of B-factory and charm-factory data to obtain the relevant charm-decay information needed for this measurement. Measurement sensitivities are estimated for the currently available B-factory data sample, and D decay modes for which use of this method can make a significant contribution toward reducing the total error on {gamma} are identified.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

elm-diagnostics

elm-diagnostics is a Python package for computing diagnostic analyses and visualizations for the E3SM Land Model (ELM) component and is meant to support new feature development in ELM. The tool reads model history files and performs quantitative analyses including budget-closure checking, variable transformations, temporal aggregations, and statistical summaries to support model evaluation, validation, and scientific interpretation. The framework is designed for extensibility, with modular architecture enabling straightforward addition of new diagnostic methods, derived variables, analysis types, visualization approaches, and model-specific adaptations

Hoffman, Matt [Los Alamos National Laboratory]↗