Search NASA⌕ Search

SEARCH · Search NASA

Results for “variable data rates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

The implementation and operation of a variable-response electronic throttle control system for a TF-104G aircraft

During some flight programs, researchers have encountered problems in the throttle response characteristics of high-performance aircraft. To study and to help solve these problems, the National Aeronautics and Space Administration Ames Research Center's Dryden Flight Research Facility (Ames-Dryden) conducted a study using a TF-104G airplane modified with a variable-response electronic throttle control system. Ames-Dryden investigated the effects of different variables on engine response and handling qualities. The system provided transport delay, lead and lag filters, second-order lags, command rate and position limits, and variable gain between the pilot's throttle command and the engine fuel controller. These variables could be tested individually or in combination. Ten research flights were flown to gather data on engine response and to obtain pilot ratings of the various system configurations. The results should provide design criteria for engine-response characteristics. The variable-response throttle components and how they were installed in the TF-104G aircraft are described. How the variable-response throttle was used in flight and some of the results of using this system are discussed.

Neal, Bradford↗
NASA NTRS1980

Seismicity and the subduction process

There is considerable variation between subduction zones in the largest characteristic earthquake within each zone. Assuming that coupling between downgoing and upper plates is directly related to characteristic earthquake size, tests for correlations between variation in coupling and other physical features of subduction zones are conducted: the lateral extent and penetration depth of Benioff zones, age of subducting lithosphere, convergence rate, and back-arc spreading. Using linear multivariate regression, coupling is correlated with two variables: convergence rate and lithosphere age. Secondary correlations within the data set are penetration depth versus lithosphere age, and lateral extent versus convergence rate. Taken together, the observed correlations suggest a simple qualitative model where convergence rate and lithosphere age determine the horizontal and sinking rates, respectively, of slabs: these parameters influence the seismic coupling in the subduction zone. In the limit of a fast sinking rate and slow convergence rate, back-arc spreading occurs and thereby appears to be a passive process.

Ruff, L.↗
NASA NTRS1988

Energy distributions of blazars

This paper presents observations of 162 blazars, over one-half of which were detected with data from the IRAS satellite using a coadded survey and pointed observations. The far-IR data were combined with published data at other wavelengths to complete 93 energy distributions from 10 to the 8th to 10 to the 18th Hz. The IRAS data were used to search for variability on time scales of 3-9 months in 24 objects. The detection rate of variability found for blazars was nearly 40 percent, as compared with a complete absence of detected variability in data sets for quasars and Seyfert galaxies. The range of variability in both spectral index and flux density increases with decreasing wavelength. Half of the blazars with total luminosities less than 10 to the 12th solar luminosity show evidence for thermal IR component. The global energy budget of blazars is dominated by IR emission from 1 to 100 microns.

Impey, C. D.↗
NASA NTRS1990

High-performance equation solvers and their impact on finite element analysis

The role of equation solvers in modern structural analysis software is described. Direct and iterative equation solvers which exploit vectorization on modern high-performance computer systems are described and compared. The direct solvers are two Cholesky factorization methods. The first method utilizes a novel variable-band data storage format to achieve very high computation rates and the second method uses a sparse data storage format designed to reduce the number of operations. The iterative solvers are preconditioned conjugate gradient methods. Two different preconditioners are included; the first uses a diagonal matrix storage scheme to achieve high computation rates and the second requires a sparse data storage scheme and converges to the solution in fewer iterations that the first. The impact of using all of the equation solvers in a common structural analysis software system is demonstrated by solving several representative structural analysis problems.

Poole, Eugene L.↗
NASA NTRS1992

High-performance equation solvers and their impact on finite element analysis

The role of equation solvers in modern structural analysis software is described. Direct and iterative equation solvers which exploit vectorization on modern high-performance computer systems are described and compared. The direct solvers are two Cholesky factorization methods. The first method utilizes a novel variable-band data storage format to achieve very high computation rates and the second method uses a sparse data storage format designed to reduce the number od operations. The iterative solvers are preconditioned conjugate gradient methods. Two different preconditioners are included; the first uses a diagonal matrix storage scheme to achieve high computation rates and the second requires a sparse data storage scheme and converges to the solution in fewer iterations that the first. The impact of using all of the equation solvers in a common structural analysis software system is demonstrated by solving several representative structural analysis problems.

Poole, Eugene L.↗
NASA NTRS1995

Software For Uniaxial Mechanical Testing Of Materials

Materials Testing Software system designed to simplify and automate both routine and not-so-routine materials-testing tasks encountered in laboratory. Supports plan/test/analyze cycle through collection of programs, each optimized to specific task. Gives precise control over nature of command waveforms and acquisition of data, including dynamically variable waveform types, sets of data-acquisition channels, and data rates. Differing command and data-acquisition rates required for exploring creep and fatigue material behavior easily accommodated. Written in Modula-2.

Mcgaw, M. A.↗
NASA NTRS1998

Terrier-Black Brant Sounding Rocket Microacceleration Environment

On September 10, 1997 a Terrier-Black Brant Sounding Rocket was launched to support the Lewis Research Center DARTFire combustion experiment at the White Sands Missile Range in New Mexico. The sounding rocket also carried two microacceleration measurement systems to support the DARTFire experiment by measuring the microacceleration environment. The SAMS-FF system and a SAMS-type triaxial sensor head (TSH) were flown. The SAMS-FF system consisted of a variable frequency, digital output TSH and a roll rate sensor. Data from the two systems were analyzed and compared. Data will be presented from both systems in order to characterize the sounding rocket microacceleration environment. The data collected demonstrated that a sounding rocket is a viable vehicle for conducting space experiments that require a quiet, dedicated microacceleration environment.

Kacpura, Thomas↗
NASA NTRS2012

An Evaluation of Antarctica as a Calibration Target for Passive Microwave Satellite Missions

Passive microwave remote sensing at L-band (1.4 GHz) is sensitive to soil moisture and sea surface salinity, both important climate variables. Science studies involving these variables can now take advantage of new satellite L-band observations. The first mission with regular global passive microwave observations at L-band is the European Space Agency's Soil Moisture and Ocean Salinity (SMOS), launched November, 2009. A second mission, NASA's Aquarius, was launched June, 201l. A third mission, NASA's Soil Moisture Active Passive (SMAP) is scheduled to launch in 2014. Together, these three missions may provide a decade-long data record -- provided that they are intercalibrated. The intercalibration is best performed at the radiance (brightness temperature) level, and Antarctica is proving to be a key calibration target. However, Antarctica has thus far not been fully characterized as a potential target. This paper will present evaluations of Antarctica as a microwave calibration target for the above satellite missions. Preliminary analyses have identified likely target areas, such as the vicinity of Dome-C and larger areas within East Antarctica. Physical sources of temporal and spatial variability of polar firn are key to assessing calibration uncertainty. These sources include spatial variability of accumulation rate, compaction, surface characteristics (dunes, micro-topography), wind patterns, and vertical profiles of density and temperature. Using primarily SMOS data, variability is being empirically characterized and attempts are being made to attribute observed variability to physical sources. One expected outcome of these studies is the potential discovery of techniques for remotely sensing--over all of Antarctica--parameters such as surface temperature.

Kim, Edward↗
NASA NTRS2011

An Evaluation of Antarctica as a Calibration Target for Passive Microwave Satellite Missions with Climate Data Record Applications

Passive microwave remote sensing at L-band (1.4 GHz) is sensitive to soil moisture and sea surface salinity, both important climate variables. Science studies involving these variables can now take advantage of new satellite L-band observations. The first mission with regular global passive microwave observations at L-band is the European Space Agency's Soil Moisture and Ocean Salinity (SMOS), launched November, 2009. A second mission, NASA's Aquarius, was launched June, 201 I. A third mission, NASA's Soil Moisture Active Passive (SMAP) is scheduled to launch in 2014. Together, these three missions may provide a decade-long data record-provided that they are intercalibrated. The intercalibration is best performed at the radiance (brightness temperature) level, and Antarctica is proving to be a key calibration target. However, Antarctica has thus far not been fully characterized as a potential target. This paper will present evaluations of Antarctica as a microwave calibration target for the above satellite missions. Preliminary analyses have identified likely target areas, such as the vicinity of Dome-C and larger areas within East Antarctica. Physical sources of temporal and spatial variability of polar firn are key to assessing calibration uncertainty. These sources include spatial variability of accumulation rate, compaction, surface characteristics (dunes, micro-topography), wind patterns, and vertical profiles of density and temperature. Using primarily SMOS data, variability is being empirically characterized and attempts are being made to attribute observed variability to physical sources. One expected outcome of these studies is the potential discovery of techniques for remotely sensing--over all of Antarctica-parameters such as surface temperature.

Kim, Edward↗
NASA NTRS1976

Transition heating rates determined on a 0.006 scale space shuttle orbiter model (no. 50-0) in the NASA/LaRC Mach 8 variable density wind tunnel test (OH14)

Data obtained from wind tunnel tests of an .006-scale space shuttle orbiter model in the 18 in. Variable Density Wind Tunnel are presented. The tests, denoted as OH14, were performed to determine transition heating rates using thin skin thermocouples located at various locations on the space shuttle orbiter. The model was tested at M = 8.0 for a range of Reynolds numbers per foot varying from 1.0 to 10.0 million with angles-of-attack from 20 to 35 degrees incremented by 5 degrees.

Cummings, J.↗
NASA NTRS1989

The ground truth analysis of rain gauge data for the TRMM project

As a part of the Tropical Rainfall Measuring Missioin (TRMM) ground truth program to determine the diurnal variability of the area wide rain rates, the rain rate PDFs, and their effect on the area integral algorithm, rain rate data have been collected from a network of gages located in the area near the Cape Canaveral and Kennedy Space Center, in the period beginning in September 1987. In the preliminary statistical analysis, based on the rain rates derived from the eleven gages, the seasonal diurnal rainfall and network averaged rain rates are determined. The analysis was performed in two steps: determination of the hourly and daily rain accumulations and rain rates; and computation of the fraction of hourly and daily rain rates that exceed a particular threshold, and analysis of the hourly and daily rain rate PDFs for the network. The results indicate that there are diurnal and seasonal variations in the components which determine the network rain rate PDFs.

Kowalewsky, Karen J.↗
NASA NTRS1981

The effect of temperature fluctuations of reaction rate constants in turbulent reacting flows

Current models of turbulent reacting flows frequently use Arrhenius reaction rate constants obtained from static or laminar flow theory and/or experiments, or from best fits of static, laminar, and turbulent data. By treating the reaction rate constant as a continuous random variable which is temperature-dependent, the present study assesses the effect of turbulent temperature fluctuations on the reaction rate constant. This model requires that a probability density function (PDF) describing the nature of the fluctuations be specified. Three PDFs are examined: the clipped Gaussian, the beta PDF, and the ramp model. All the models indicate that the reaction rate constant is greater in a turbulent flow field than in an equivalent laminar flow. In addition, an amplification ratio, which is the ratio of the turbulent rate constant to the laminar rate constant, is defined and its behavior as a function of the mean temperature fluctuations is described

Chinitz, W.↗
NASA NTRS1988

Dynamic fatigue testing of Zerodur glass-ceramic

The inherent brittleness of glass invariably leads to a large variability in strength data and a time dependence in strength. Leading rate plays a large role in strength values. Glass is found to be weaker when supporting loads over long periods of time as compared to glass which undergoes rapid leading. These properties complicate the structural design allowables for the utilization of glass components in an application such as Advanced X-ray Astrophysics Facility (AXAF). The test methodology to obtain parameters which can be used to predict the reliability and life time of Zerodur glass-ceramic which is to be used for the mirrors in the AXAF is described.

Tucker, Dennis S.↗
NASA NTRS1991

The spin state and homogeneity of Comet Halley's nucleus

The present model of the spin rate of Comet Halley, which takes the form of an excited, axially symmetric rotator with prolate spheroid shape, accommodates both the imaging data from the Vega and Giotto encounters and a range of ground-based data for CN jets and shells, C2 production rates, and photometric variability. The model ratio of moments-of-inertia maxima to minima, at 2.28, implies a nearly constant density distribution throughout its interior. One of the five localized areas on the nucleus which dominate the activity observed appears to be uniquely responsible for the initiation of CN-shell boundaries which propagate through the coma, and may be indicative of either large-scale chemical inhomogeneity or a surface region with unusual physical structure.

Belton, Michael J. S.↗
NASA NTRS1992

Ultraviolet and visible variability of the coma of Comet Levy (1990c)

A visible lightcurve of Comet Levy obtained with the IUE Fine Error Sensor has revealed short-term coma variability. A production-rate source function is derivable from these data which implies a nucleus exhibiting hemispherically asymmetric activity. The ratio of gas-to-dust-production rates is also noted to exhibit asymmetry. The low dust-outflow velocity derived from observations, at about 200 m/sec, indicates a distribution that is rich in large, 3-10 micron particles.

Feldman, P. D.↗
NASA NTRS1993

Collisional desorption of NO by fast O atoms

Surface-adsorbed NO figures largely in the mechanism that produces visible glow around spacecraft in low Earth orbit (LEO). In view of the potential interference to optical observations such a glow represents, we have investigated the collision-induced desorption of NO from Al, Ni, and Z306 Chemglaze-coated surfaces at 96 K by hyperthermal (8 km/s) oxygen atoms. The removal of surface NO was followed by the monitoring of the visible fluorescence of electronically excited NO2 produced through the surface-mediated reaction O + NO. A variability in collisional desorption rate with material was observed. The limited data suggest a removal efficiency of 4 to 8% of the impinging O atom flux. Implications for the atmospheric scouring of contaminants from external surfaces of LEO spacecraft are discussed.

Sonnenfroh, David M.↗
NASA NTRS2011

Development of a Multivariable Parametric Cost Analysis for Space-Based Telescopes

Over the past 400 years, the telescope has proven to be a valuable tool in helping humankind understand the Universe around us. The images and data produced by telescopes have revolutionized planetary, solar, stellar, and galactic astronomy and have inspired a wide range of people, from the child who dreams about the images seen on NASA websites to the most highly trained scientist. Like all scientific endeavors, astronomical research must operate within the constraints imposed by budget limitations. Hence the importance of understanding cost: to find the balance between the dreams of scientists and the restrictions of the available budget. By logically analyzing the data we have collected for over thirty different telescopes from more than 200 different sources, statistical methods, such as plotting regressions and residuals, can be used to determine what drives the cost of telescopes to build and use a cost model for space-based telescopes. Previous cost models have focused their attention on ground-based telescopes due to limited data for space telescopes and the larger number and longer history of ground-based astronomy. Due to the increased availability of cost data from recent space-telescope construction, we have been able to produce and begin testing a comprehensive cost model for space telescopes, with guidance from the cost models for ground-based telescopes. By separating the variables that effect cost such as diameter, mass, wavelength, density, data rate, and number of instruments, we advance the goal to better understand the cost drivers of space telescopes.. The use of sophisticated mathematical techniques to improve the accuracy of cost models has the potential to help society make informed decisions about proposed scientific projects. An improved knowledge of cost will allow scientists to get the maximum value returned for the money given and create a harmony between the visions of scientists and the reality of a budget.

Dollinger, Courtnay↗
NASA NTRS2021

NASA Leveraging Commercial Communication Ground Stations for Small Satellites

The Space Communications and Navigation (SCaN) program at NASA has reorganized its operations portfolio into two networks: the Deep Space Network and the new Near Space Network (NSN). With this reorganization, NASA can begin transforming to 100% direct-to-Earth commercial communications services for missions in the near-Earth region. NASA’s leveraging of commercial direct-to-Earth ground stations offers several benefits for the small satellite community, including lower cost, greater coverage, and increased technology infusion. In the fall of 2020, SCaN announced their intention to rely primarily on industry-provided communications services for missions close to Earth by 2030. Commercial services are one way to infuse new technology into the ground station network without requiring an investment from NASA. Digital Video Broadcast, Satellite Second Generation (DVB-S2) is one example of a current technology. When combined with variable coding and modulation (VCM), the system automatically optimizes the data rate based on signal performance, significantly increasing total downlink data volume without an increase in the spacecraft effective isotropic radiated power (EIRP). There are several commercial service providers, including Amazon Web Service (AWS) Ground Station (AGS) and the KSATLITE ground stations that support SmallSat missions using DVB-S2 waveforms for downlinks. This paper identifies some commercial off-the-shelf (COTS) CubeSat/SmallSat DVB-S2 X-band and Ka-band radios. Overall, NASA’s increased dependence on commercial direct-to-Earth ground stations is a significant benefit for the small satellite community.

Space Communications↗