A new scaling approach for the mesoscale simulation of magnetic domain structures using Monte Carlo simulations
Not Available
Radhakrishnan, B.↗
SEARCH · Search NASA
Results for “vortex structures”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Numerical simulation of excited jet mixing layers
A numerical simulation of unsteady flow in jet mixing layers, both with and without external excitation, has been performed by solving the time-dependent compressible Navier-Stokes equations. Computations were performed on a CRAY X-MP computer using MacCormick's explicit finite difference algorithm. Different excitation methods were investigated and were shown to be very effective in controlling the well organized periodic production, shedding and pairing of large scale vortex structures. It is found that pressure excitation was generally more effective than temperature excitation, and that grid refinement results in substantial improvement in the resolution of unsteady features. The location and orientation, in addition to the frequency, of the excitation source are shown to have a significant influence on the production and interaction of large scale vortex structures in the jet mixing layer.
Scott, J. N.↗
Highly Inclined Jets in Cross Flow
Results from an experimental investigation of flow field generated by pitched and yawed jets discharging from a flat plate into a cross-flow are presented. The circular jet was pitched at alpha = 20deg and 45deg and yawed between Beta = 0deg and 90deg in increments of 15deg. The measurements were performed with two ×-wires providing all three components of velocity and turbulent stresses. These data were obtained at downstream locations of x = 3, 5, 10 and 20, where the distance x, normalized by the jet diameter, is measured from the center of the orifice. Data for all configurations were acquired at a momentum-flux ratio J = 8. Additionally, for selected angles and locations, surveys were conducted for J = 1.5, 4, and 20. As expected, the jet penetration is found to be higher at larger alpha. With increasing beta the jet spreads more. The rate of reduction of peak streamwise vorticity, ω max, with the downstream distance is significantly less at higher Beta but is found to be practically independent of alpha. Thus, at the farthest measurement station x = 20, ωxmax is about five times larger for Beta = 75deg compared to the levels at Beta = 0deg. Streamwise velocity within the jet-vortex structure is found to depend on the parameter J. At J = 1.5 and 4, 'wake-like' velocity profiles are observed. In comparison, a 'jet-like' overshoot is present at higher J. Distributions of turbulent stresses for various cases are documented. Peak normal stresses are found to occur within the core of the streamwise vortices. With yaw, at lower values of J, high turbulence is also observed in the boundary layer underneath the jet-vortex structure
Milanovic, I. M.↗
Electron acoustic wave driven vortices with non-Maxwellian hot electrons in magnetoplasmas
Linear dispersion characteristics of the Electron Acoustic Wave (EAW) and the corresponding vortex structures are investigated in a magnetoplasma in the presence of non-Maxwellian hot electrons. In this regard, kappa and Cairns distributed hot electrons are considered. It is noticed that the nonthermal distributions affect the phase velocity of the EAW. Further, it is found that the phase velocity of EAW increases for Cairns and decreases for kappa distributed hot electrons. Nonlinear solutions in the form of dipolar vortices are also obtained for both stationary and non-stationary ions in the presence of kappa distributed hot electrons and dynamic cold electrons. It is found that the amplitude of the nonlinear vortex structures also reduces with kappa factor like the electron acoustic solitons.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Assimilation of X-band Phased-Array Radar Data with EnKF for the Analysis and Warning Forecast of a Tornadic storm
The impact of assimilating China's operational X-band Phased-Array radar's (X-PAR) data on the analysis and warning forecast of the vortex structure and intensity of the June 8, 2018 Foshan, Guangdong province, tornadic storm was investigated for the first time using an Ensemble Kalman Filter (EnKF) data assimilation system. Both radar radial velocity (Vr) and reflectivity (Z) from two S-band operational radars and one X-PAR were assimilated. Deterministic forecasts were launched every 6 min from 05:42 UTC (20 min before the tornado touched down) to 06:00 UTC from the EnKF mean analysis field. Five experiments were conducted to examine the added capability of Z assimilation of the EnKF system, and to investigate the impact of assimilating X-PAR data on the analysis and prediction of the tornadic storm. Compared to the experiment without Z assimilation, the assimilation of Z reduced the analysis error and greatly reduced the forecast error of Z. Furthermore, the assimilation of X-PAR data greatly improved the vortex structure of the tornadic storm at low levels, and improved the intensity of the rear inflow of the tornadic storm, especially with a higher assimilation frequency. Compared to the experiments without X-PAR data assimilation, assimilating X-PAR data improved the predictability of tornadic storm.
54 ENVIRONMENTAL SCIENCES↗
Simulation Analysis and Performance Study of CoCrMo Porous Structure Manufactured by Selective Laser Melting
To fabricate porous implants with improved biocompatibility and mechanical properties that are matched to their application using selective laser melting (SLM), flow within the mold and compressive properties and performance of the porous structures must be comprehensively studied. Parametric modeling was used to build 3D models of octahedron and hexahedron structures. Finite element analysis was used to evaluate the mold flow and compressive properties of the parametric porous structures. A DiMetal-100 SLM molding apparatus was used to manufacture the porous structures and the results evaluated by light microscopy. The results showed that parametric modeling can produce robust models. Square structures caused higher blood cell adhesion than cylindrical structures. “Vortex” flow in square structures resulted in chaotic distribution of blood elements, whereas they were mostly distributed around the connecting parts in the cylindrical structures. No significant difference in elastic moduli or compressive strength was observed in square and cylindrical porous structures of identical characteristics. Hexahedron, square and cylindrical porous structures had the same stress–strain properties. For octahedron porous structures, cylindrical structures had higher stress–strain properties. Using these modeling and molding results, an important basis for designing and the direct manufacture of fixed biological implants is provided.
36 MATERIALS SCIENCE↗
Topologically Allowed Nonsixfold Vortices in a Sixfold Multiferroic Material: Observation and Classification
Here, we report structural transformation of sixfold vortex domains into two-, four-, and eightfold vortices via a different type of topological defect in hexagonal manganites. Combining high-resolution electron microscopy and Landau-theory-based numerical simulations, we also investigate the remarkable atomic arrangement and the intertwined relationship between the vortex structures and the topological defects. The roles of their displacement field, formation temperature, and nucleation sites are revealed. All conceivable vortices in the system are topologically classified using homotopy group theory, and their origins are identified.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Dissipative soliton vortices and tropical cyclones
We have obtained a new exact steady-state solution to the hydrodynamic equation for a viscous incompressible liquid, which is a generalization of the well-known Sullivan solution (1959), taking into account additionally the external (Eckman) friction and rotation of the system as a single whole. In contrast to the radial structure of a Sullivan vortex, different circulation directions of velocity field tangential component are possible in the new solution in the inner and outer cells. We have considered the correspondence of this solution to the radial vortex structure observed in tropical cyclones, where the precisely anticyclonic circulation always exists in the inner core (typhoon, hurricane eye), which is associated with descending vertical currents for the cyclonic direction of rotation (as well as ascending currents) outside this core.
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
Observations of a large-scale vortex-like structure in the deep-tail plasma sheet boundary layer
ISEE-3 observations of a large-scale vortexlike structure in the deep tail of the magnetosphere at X(GSM) = -217 earth radii are reported. The structure is characterized by two clockwise rotations of the energetic-ion anisotropy vector. Variations in the magnetic-field vector approximately 180 deg out of phase with the ion variations are observed. This structure is most likely the signature within the magnetosphere of a surface wave at the magnetopause driven by a Kelvin-Helmholtz instability. Conditions inside and outside of the magnetosphere, as observed by ISEE-3 and ISEE-2, respectively, are examined; these conditions suggest that the surface wave is most likely propagating in the slow mode.
Sanderson, T. R.↗
The vortex interaction in a propeller/stator flow field
The vortex interaction encounered in the flow field of a propeller and a stator has been investigated using smoke flow visualization. A stator at angle of attack was used to generate a line vortex which interacted with the helical vortex filaments generated by a propeller. Changes in the relative vortex strengths and vortex rotational directions yielded several distinct vortex structures. Axial flow in the vortex cores is determined to influence the development of the vortex interaction.
Johnston, R. T.↗
Computational Study of Porous Treatment for Altering Flap Side-Edge Flowfield
Reynolds-averaged Navier-Stokes calculations are used to investigate porous side-edge treatment as a passive means for flap noise reduction. Steady-state simulations are used to infer effects of the treatment on acoustically relevant features of the mean flow near the flap side edge. Application of the porous treatment over a miniscule fraction of the wetted flap area (scaling with the flap thickness) results in significantly weaker side-edge vortex structures via modification of the vortex initiation and roll-up processes. At high flap deflections, the region of axial flow reversal associated with the breakdown of the side-edge vortex is also eliminated, indicating an absence of vortex bursting in the presence of the treatment. Potential ramifications of the mean-flow modifications for flap-noise reduction are examined in the light of lessons learned from recent studies on flap noise. Computations confirm that any noise reduction benefit via the porous treatment would be achieved without compromising the aerodynamic effectiveness of the flap. Results of the parameter study contribute additional insight into the measured data from the 7x10 wind tunnel at NASA Ames and provide preliminary guidance for specifying optimal treatment characteristics in terms of treatment location, spatial extent, and flow resistance of the porous skin.
Choudhari, Meelan↗
Evolution of a vortical structure associated with the bursting event in a channel flow
The temporal evolution of a horseshoe vortex structure in a channel is investigated by a numerical simulation. A spectral numerical method is employed to integrate the time-dependent, three-dimensional Navier-Stokes equations. The initial vortical structure is obtained by applying a conditional sampling technique to a data base generated from a direct simulation of a turbulent channel flow. The evolution of this vortical structure under the influence of the self-induced motion and the mean shear is presented. It is shown that the initial sheet-like vortical structure rolls up into a vortex tube as it is convected downstream. Turbulence structures associated with the vortex stretching are investigated. Production of vorticity stretching is high inside the vortex legs, although it is also substantial in the tip region and above the legs. High Reynolds shear stress is produced near the tip of the vortex.
Kim, J.↗
Flows over wings with leading-edge vortex separation
The unsteady cross flow analogy reduces the steady three dimensional separation flow problem into an unsteady two dimensional flow problem in which the section shape changes with time. The two dimensional VORSEP code is extended to the case of arbitrary body growth rates in order to generate the initial vortex structures for the three dimensional free vortex sheet (FVS) code. Automatic procedures to reduce the wing geometry definition to a set of cross flow plane sections corresponding to the locations of the time step solutions and to generate the effective source distribution on each cross flow section to represent the section normal growth across the following steps are incorporated in the VORSEP code. Also, the wake shedding model is improved by adopting a redistribution scheme which improves the stability of the free sheet development with time. The improved wake shedding model combined with the redistribution scheme alleviated the numerical instabilities associated with the vortex rollup.
Rao, B. M.↗
Observables for anticipating tornadogenesis in mesocyclones
We seek to identify an observable for anticipating tornadogenesis in mesocyclones, because such tornadoes are characterized by particularly long life, long and wide path, and high wind speed. We associate tornadogenesis with the transition from a one-cell vortex to a two-cell vortex. In such a transition, 'insertion' of a virtually nonrotating, slowly recirculating core displaces that high-swirl-speed air which is rapidly ascending along a moist-adiabatic locus of thermodynamic states, to an annulus at small but finite distance from the axis of rotation. Such a transition, on a vastly larger lateral scale, is known to characterize intensification of a tropical storm to a typhoon. We examine analytically a quasisteady axisymmetric model of a four-part vortex structure consisting of a bulk potential vortex, near-ground inflow layer, 'eyewall', and 'eye'. We inquire whether such a four-part intense vortex, formed in convectively unstably stratified air, is self-sustaining. In particular, we inquire whether the vertical profile of the angular momentum at the periphery is a discriminant for identifying self-sustaining vortices.
Carrier, G.↗
Geometrical Vortex Lattice Pinning and Melting in YBaCuO Submicron Bridges.
Since the discovery of high-temperature superconductors (HTSs), most efforts of researchers have been focused on the fabrication of superconducting devices capable of immobilizing vortices, hence of operating at enhanced temperatures and magnetic fields. Recent findings that geometric restrictions may induce self-arresting hypervortices recovering the dissipation-free state at high fields and temperatures made superconducting strips a mainstream of superconductivity studies. Here in this paper we report on the geometrical melting of the vortex lattice in a wide YBCO submicron bridge preceded by magnetoresistance (MR) oscillations fingerprinting the underlying regular vortex structure. Combined magnetoresistance measurements and numerical simulations unambiguously relate the resistance oscillations to the penetration of vortex rows with intermediate geometrical pinning and uncover the details of geometrical melting. Our findings offer a reliable and reproducible pathway for controlling vortices in geometrically restricted nanodevices and introduce a novel technique of geometrical spectroscopy, inferring detailed information of the structure of the vortex system through a combined use of MR curves and large-scale simulations.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Polarized neutron scattering study of the multiple order parameter system NdB 4 [Polarized neutron scattering study on multiple order parameter system NdB 4 ]
Neutron polarization analysis has been carried out in order to clarify the magnetic structures of multiple order parameter f-electron system NdB 4 . We confirmed the noncollinear “all-in all-out” structure (Γ 4 ) of the in-plane moment, which is in good agreement with our previous neutron powder diffraction study. We found that the magnetic moment along the c-axis m c showed diagonally antiferromagnetic structure (Γ 10 ), inconsistent with previously reported “vortex” structure (Γ 2 ). The microscopic mixture of these two structures with → q 0 =(0,0,0) appears in phase II and remains stable in phases III and IV, where an incommensurate modulation coexists. The unusual magnetic ordering is phenomenologically understood via Landau theory with the primary order parameter Γ 4 coupled with higher-order secondary order parameter Γ 10 . The magnetic moments were estimated to be 1.8 ± 0.2 and 0.2 ± 0.05μ B at T = 7.5K for Γ 4 and Γ 10 , respectively. We also found a long-period incommensurate modulation of the → q 1 =(0,0,1/2) antiferromagnetic structure of mc with the propagation → q s1 =(0.14,0.14,0.1) and → q s2 =(0.2,0,0.1) in phase III and IV, respectively. The amplitude of sinusoidal modulation was about m c =1.0 ± 0.2μ B at T=1.5 K. The local (0,0,1/2) structure consists of in-plane ferromagnetic and out-of-plane antiferromagnetic coupling of m c , opposite to the coexisting Γ 10 . The mc of Γ 10 is significantly enhanced up to 0.6μ B at T=1.5 K, which is accompanied by the incommensurate modulations. As a result, the Landau phenomenological approach indicates that the higher-order magnetic and/or multipole interactions based on the pseudoquartet f-electron state play important roles.
36 MATERIALS SCIENCE↗
Turbulent boundary layer structure - Progress, status, and challenges
Results of a cooperative effort to review the structure of the turbulent boundary layer are summarized. The principal concepts relevant to the study are briefly reviewed, with particular attention given to vorticity lines and vortices, vortex elements and vortex structures, and average models and realizations. The discussion covers the preliminary ordering of the importance of structure elements, the strength of vortex elements, and time evolution of structures. Finally, some areas of further research are suggested.
Kline, S. J.↗
Two dimensional turbulence in inviscid fluids or guiding center plasmas
Analytic theory for two-dimensional turbulent equilibria for the inviscid Navier-Stokes equations is examined mathematically. Application of the technique to electrostatic guiding center plasma is discussed. A good fit is demonstrated for the approach to a predicted energy per Fourier mode obtained from a two-temperature canonical ensemble. Negative as well as positive temperature regimes are explored. Fluctuations about the mean energy per mode also compare well with theory. In the regime of alpha less than zero, beta greater than zero, with the minimum value of alpha plus beta times k squared near zero, contour plots of the stream function reveal macroscopic vortex structures similar to those seen previously in discrete vortex simulations. Eulerian direct interaction equations, which can be used to follow the approach to inviscid equilibrium, are derived.
Seyler, C. E., Jr.↗