Search NASA⌕ Search

SEARCH · Search NASA

Results for “wave shaping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Electrocatalytic Ammonia Oxidation with Coordinatively Saturated Ruthenium Catalyst

This communication describes the investigation of a coordinatively saturated complex [Ru(tpy)(dmabpy)Cl] + ([Ru(Cl)] + ) as an ammonia oxidation catalyst. Cyclic voltammetry measurements show an ideal S-shaped wave, indicating total catalysis conditions with a k obs (TOF max ) of 9360 h −1 . The reaction was found to be first-order in [Ru(Cl)] + and third-order in [NH 3 ]. Stoichiometric reactions of the one-electron oxidized species, [Ru(Cl)] 2+ , were monitored following the addition of 15 NH 3 using 1 H and 15 N NMR spectroscopy. These experiments showed that the chloride-coordinated complex rapidly converts NH 3 to N 2 . NMR spectroscopy and electrochemistry results definitively show that NH 3 does not substitute the Cl − ligand to form the previously reported [Ru(NH 3 )] 2+ catalyst which operates by a different mechanistic pathway. Taken together these results indicate outersphere electron transfer mediated ammonia oxidation reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On a physics-based model equation for shock-position evolution in PMMA

A governing differential equation for shock position in PMMA was derived from momentum conservation and an experimentally determined decay law for shock pressure. A new multi-diagnostic characterization method for measuring detonator pressure and wave shape output in PMMA witness blocks provided temporally resolved, 1-D, shock-position data that was iteratively fit by solutions to the governing equation via a unique genetic algorithm solver. The goal was to calculate a solution that describes the temporal evolution of shock pressure in PMMA starting at the detonator interface. The empirical decay law was investigated using experimental data, where different regimes were considered for the decay coefficients. A successful solution provides extensive performance information that is directly relevant to the understanding and characterization of detonator function.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Analysis of THz generation by multicolor laser pulses with various frequency ratios

Here, terahertz (THz) generation in a gas medium is simulated by quantum calculations with multicolor intense laser pulses of various frequency ratios. By correlating THz radiation with the above-threshold-ionization photoelectron spectrum, we confirm that our previously proposed free-free transition model for the generation of THz radiation is also applicable to multicolor pulses. THz photon emissions can proceed through transitions between continuous states with similar energies that have opposite parities. This mechanism predicts that THz waves can be efficiently generated at special two-color laser frequency ratios when the multiphoton mixing condition is satisfied. Applying this model to multicolor fields (sawtooth wave shape), we provide a quantum-mechanical interpretation for the reason for THz radiation enhancement. A scheme combining multiple lasers to raise THz radiation satisfying multiphoton mixing conditions is also proposed.

74 ATOMIC AND MOLECULAR PHYSICS↗

Bidirectional Multiphoton Communication between Remote Superconducting Nodes

Quantum communication test beds provide a useful resource for experimentally investigating a variety of communication protocols. Here we demonstrate a superconducting circuit test bed with bidirectional multiphoton state transfer capability using time -domain shaped wave packets. Further, the system we use to achieve this comprises two remote nodes, each including a tunable superconducting transmon qubit and a tunable microwave -frequency resonator, linked by a 2 m-long superconducting coplanar waveguide, which serves as a transmission line. We transfer both individual and superposition Fock states between the two remote nodes, and additionally show that this bidirectional state transfer can be done simultaneously, as well as being used to entangle elements in the two nodes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

SU-F-T-255: Accuracy and Precision of Dynamic Tracking Irradiation with VERO-4DRT System

Purpose: The VERO-4DRT system is able to provide dynamic tracking irradiation (DTI) for the target with respiratory motion. This technique requires enough commissioning for clinical implementation. The purpose of this study is to make sure the accuracy and precision of DTI using VERO- 4DRT through commissioning from fundamental evaluation to end-to-end test. Method: We evaluated several contents for DTI commissioning: the accuracy of absorption dose at isocenter in DTI, the field size and penumbra of DTI, the accuracy of 4D modeling in DTI. All evaluations were performed by respiratory motion phantom (Quasar phantom). These contents were compared the results between static irradiation and DTI. The shape of radiation field was set to square from 3 cm × 3 cm to 10 cm × 10 cm. The micro 3D chamber and Gafchromic EBT3 film were used for absorbed dose and relative dose distribution measurement, respectively. The sine and irregular shaped waves were used for demonstrative respiratory motion. The visicoil was implanted into the phantom for guidance of respiratory motion. The respiration patterns of frequency and motion amount were set to 10–15 BPM and 1–2 cm, respectively. Results: As the result of absorbed dose of DTI in comparison with static irradiation, the average dose error at isocenter was 0.5% even though various respiratory patterns were set on. As the result of relative dose distribution, the field size (set it on 50% dose line) was not significantly changed in all respiratory patterns. However, the penumbra was larger in greater respiratory motion (up to 4.1 mm). The 4D modeling coincidence between actual and created waves was within 1%. Conclusion: The DTI using VERO-4DRT can provide sufficient accuracy and precision in absorbed dose and distribution. However, the patientspecific quantitative internal margin corresponding respiratory motion should be taken into consideration with image guidance.

60 APPLIED LIFE SCIENCES↗

Efficient design of random metasurfaces

Random media introduce large degrees of freedom in device design and can thus address challenges in manipulating optical waves. Wave shaping with metasurfaces has mainly utilized periodic or quasi-periodic grids, and the potential of random arrangement of particles for devices has only come under investigation recently. The main difficulty in pursuing random metasurfaces is the identification of the degrees of freedom that optimize their efficiencies and functions. They can also encode information using the statistics of particle distribution. We propose a phase-map that accounts for the statistical nature of random media. The method takes into account effects of random near-field couplings that introduce phase errors by affecting the phase shift of elements. The proposed approach increases the efficiency of our random metasurface devices by up to ~20%. Furthermore, this work paves the way toward the efficient design of random metasurfaces with potential applications in highly secure optical cryptography and information encoding.

Nasari, Hadiseh↗

ATLOG Modeling of Buried Cables from the November 2016 HERMES Electromagnetic Pulse Experiments

This report compares ATLOG modeling results for the response of a finite-length dissipative buried conductor interacting with a conducting ground to a measurement taken November 2016 at the High-Energy Radiation Megavolt Electron Source (HERMES) facility. We use the ATLOG frequency-domain method based on transmission line theory. Estimates of the impedance per unit length and admittance per unit length for a cable laying in a PVC pipe embedded in a concrete block are reported. Current wave shapes from both a single conductor and composite differential mode and antenna mode arrangements are close to those observed in the experiments.

42 ENGINEERING↗

Microcomputed X-Ray Tomographic Imaging and Image Processing for Microstructural Characterization of Explosives

Microstructural characterization of composite high explosives (HEs) has become increasingly important over the last several decades in association with the development of high fidelity mesoscale modeling and an improved understanding of ignition and detonation processes. HE microstructure influences not only typical material properties (e.g., thermal, mechanical) but also reactive behavior (e.g., shock sensitivity, detonation wave shape). A detailed nondestructive 3D examination of the microstructure has generally been limited to custom-engineered samples or surrogates due to poor contrast between the composite constituents. Highly loaded (>90 wt%) HE composites such as plastic-bonded explosives (PBX) are especially difficult. Here, we present efforts to improve measurement quality by using single and dual-energy microcomputed X-ray tomography and state-of-the-art image processing techniques to study a broad set of HE materials. Some materials, such as PBX 9502, exhibit suitable contrast and resolution for an automatic segmentation of the HE from the polymer binder and the voids. Other composite HEs had varying levels of success in segmentation. Post-processing techniques that used commercially available algorithms to improve the segmentation quality of PBX 9501 as well as zero-density defects such as cracks and voids could be easily segmented for all samples. Aspects of the materials that lend themselves well to this type of measurement are discussed.

36 MATERIALS SCIENCE↗

Effects of defects in composite wind turbine blades – Part 2: Progressive damage modeling of fiberglass-reinforced epoxy composites with manufacturing-induced waves

Abstract. Composite wind turbine blades are typically reliable; however, premature failures are often in regions of manufacturing defects. While the use of damage modeling has increased with improved computational capabilities, they are often performed for worst-case scenarios in which damage or defects are replaced with notches or holes. To better understand and predict these effects, an effects-of-defects study has been undertaken. As a portion of this study, various progressive damage modeling approaches were investigated to determine if proven modeling capabilities could be adapted to predict damage progression of composite laminates with typical manufacturing flaws commonly found in wind turbine blades. Models were constructed to match the coupons from, and compare the results to, the characterization and material testing study presented as a companion. Modeling methods were chosen from established methodologies and included continuum damage models (linear elastic with Hashin failure criteria, user-defined failure criteria, nonlinear shear criteria), a discrete damage model (cohesive elements), and a combined damage model (nonlinear shear with cohesive elements). A systematic, combined qualitative–quantitative approach was used to compare consistency, accuracy, and predictive capability for each model to responses found experimentally. Results indicated that the Hashin and combined models were best able to predict material response to be within 10 % of the strain at peak stress and within 10 % of the peak stress. In both cases, the correlation was not as accurate as the wave shapes were changed in the model; correlation was still within 20 % in many cases. The other modeling approaches did not correlate well within the comparative framework. Overall, the results indicate that this combined approach may provide insight into blade performance with known defects when used in conjunction with a probabilistic flaw framework.

Nelson, Jared W. (ORCID:0000000207736091)↗

An exploratory investigation of cumulative shock fatigue.

A simple device for producing cumulative shock loading in solids is described. The device uses a ballistic-impact-driven projectile to introduce high-stress waves into a solid. The impact time and load amplitude can be varied to produce fracture in one or several impacts in PMMA rods. The wavefront approached a square wave shape. Materials other than PMMA were loaded to failure to demonstrate the versatility of the device. Fracture morphologies observed with optical and scanning-electron microscopy are described.

Simonson, D.↗

Induction motor control system with voltage controlled oscillator circuit

A voltage controlled oscillator circuit is reported in which there are employed first and second differential amplifiers. The first differential amplifier, being employed as an integrator, develops equal and opposite slopes proportional to an input voltage, and the second differential amplifier functions as a comparator to detect equal amplitude positive and negative selected limits and provides switching signals which gate a transistor switch. The integrating differential amplifier is switched between charging and discharging modes to provide an output of the first differential amplifier which upon the application of wave shaping provides a substantially sinusoidal output signal. A two phased version with a second integrator provides a second 90 deg phase shifted output for induction motor control.

Nola, F. J.↗

Electric power processing, distribution and control for advanced aerospace vehicles.

The results of a current study program to develop a rational basis for selection of power processing, distribution, and control configurations for future aerospace vehicles including the Space Station, Space Shuttle, and high-performance aircraft are presented. Within the constraints imposed by the characteristics of power generation subsystems and the load utilization equipment requirements, the power processing, distribution and control subsystem can be optimized by selection of the proper distribution voltage, frequency, and overload/fault protection method. It is shown that, for large space vehicles which rely on static energy conversion to provide electric power, high-voltage dc distribution (above 100 V dc) is preferable to conventional 28 V dc and 115 V ac distribution per MIL-STD-704A. High-voltage dc also has advantages over conventional constant frequency ac systems in many aircraft applications due to the elimination of speed control, wave shaping, and synchronization equipment.

Krausz, A.↗

Cortical potentials evoked by confirming and disconfirming feedback following an auditory discrimination.

Vertex potentials elicited by visual feedback signals following an auditory intensity discrimination have been studied with eight subjects. Feedback signals which confirmed the prior sensory decision elicited small P3s, while disconfirming feedback elicited P3s that were larger. On the average, the latency of P3 was also found to increase with increasing disparity between the judgment and the feedback information. These effects were part of an overall dichotomy in wave shape following confirming vs disconfirming feedback. These findings are incorporated in a general model of the role of P3 in perceptual decision making.

Squires, K. C.↗