Search NASA⌕ Search

SEARCH · Search NASA

Results for “wave tank”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Microwave remote sensing laboratory design

Application of active and passive microwave remote sensing to the study of ocean pollution is discussed. Previous research efforts, both in the field and in the laboratory were surveyed to derive guidance for the design of a laboratory program of research. The essential issues include: choice of radar or radiometry as the observational technique; choice of laboratory or field as the research site; choice of operating frequency; tank sizes and material; techniques for wave generation and appropriate wavelength spectrum; methods for controlling and disposing of pollutants used in the research; and pollutants other than oil which could or should be studied.

Friedman, E.↗
NASA NTRS1994

Gravity gradient or gravity jitter induced viscous stress and moment fluctuations in microgravity

The dynamical behavior of fluids affected by the asymmetric gravity gradient and gravity jitter accelerations, in particular the effect of surface tension on partially-filled rotating fluids with a special example applicable to a full-scale Gravity Probe-B Spacecraft dewar tank, has been investigated. Results of slosh wave excitation along the liquid-vapor interface induced by gravity gradient acceleration indicated one-up one-down and one-down and one-up oscillations of two bubbles in the cross-section of doughnut profiles in the vertical r-z plane of a rotating dewar, and an eccentric contour of a bubble rotating around the axis of the dewar in the horizontal r-theta plane. Results of slosh wave excitation along the liquid-vapor interface induced by gravity jitter acceleration showed an equivalent to the time-dependent oscillatory force which pushes a bubble in the combined bubble motion of down-and-up and leftward-and-rightward as the bubble is rotating with respect to a rotating dewar axis. Fluctuations of fluid stress forces, fluid stress moments, and moment arm of fluid moment exerted on the dewar wall of the container due to slosh wave excitations driven by gravity gradient acceleration or gravity jitter acceleration are also investigated.

Hung, R. J.↗
NASA NTRS1994

Fluid System Angular Momentum and Moment Fluctuations Driven by Gravity Gradient or Gravity Jitter in Microgravity

The dynamical behaviour of fluids affected by the asymmetric gravity gradient acceleration and gravity jitter acceleration, in particular the effect of surface tension on partially-filled rotating fluids with special example applicable to a full-scale Gravity Probe-B Spacecraft dewar tank have been investigated. Results of slosh wave excitation along liquid-vapor interface induced by gravity gradient acceleration indicated that one-up one-down and one-down one-up oscillations of two bubbles in the cross-section of doughnut profiles in the vertical r-z plane of rotating dewar, and an eccentric contour of bubble rotating around the axis of dewar in horizontal r-Theta plane. Results of slosh wave excitation along liquid-vapor interface induced by gravity jitter acceleration indicated equivalent to time-dependent oscillatory forces which push bubble in the combined bubble motion of down-and-up and leftward-and-rightward as the bubble is rotating with respect to rotating dewar axis. Fluctuations of angular momentum, fluid moment and bubble mass center caused by slosh wave excitations driven by gravity gradient acceleration or gravity jitter acceleration are also investigated.

Hung, R. J.↗
NASA NTRS2007

Comparison of Focused and Near-Field Imaging of Spray on Foam Insulation (SOFI) at Millimeter Wave Frequencies

The Space Shuttle Columbia's catastrophic accident was due to a piece of Spray on Foam Insulation (SOFI) that broke off from the external tank and damaged the leading edge of the orbiter's left wing. Millimeter wave focused and near-field imaging methods have been suessfully used for inspecting of the SOFI samples. Comparison between these methods for the purpose of detection and evaluation of flaws in the SOFI is provided using examples of images of SOFI samples.

Kharkovsky, S.↗
NASA NTRS1995

Effect of Baffle on Gravity-Gradient-Excited Slosh Waves and Spacecraft Moment and Angular-Momentum Fluctuations in Microgravity

The dynamical behavior of fluids affected by the asymmetric gravity gradient acceleration has been investigated. In particular, the effects of surface tension on partially filled rotating fluids applicable to a full-scale Gravity Probe-B Spacecraft dewar tank with and without baffles are studied. Results of slosh wave excitation along the liquid-vapor interface induced by gravity gradient acceleration indicate that the gravity gradient acceleration is equivalent to the combined effect of a twisting force and a torsional moment acting on the spacecraft. The results are clearly seen from one-up one-down and one-down one-up oscillations in the cross-section profiles of two bubbles in the vertical (r, z)-plane of the rotating dewar, and from the eccentric contour of the bubble rotating around the axis of the dewar in a horizontal (r, theta)-plane. As the viscous force, between liquid and solid interface, greatly contributes to the damping of slosh wave excitation, a rotating dewar with baffles provides more areas of liquid-solid interface than that of a rotating dewar without baffles. Results show that the damping effect provided by the baffles reduces the amplitude of slosh wave excitation and lowers the degree of asymmetry in liquid-vapor distribution. Fluctuations of angular momentum and fluid moment caused by the slosh wave excited by gravity gradient acceleration with and without baffle boards are also investigated. It is also shown that the damping effect provided by the baffles greatly reduces the amplitudes of angular momentum and fluid moment fluctuations.

Hung, R. J.↗
NASA NTRS1982

Impingement of an oblique shock wave on a cylinder

This paper presents a numerical simulation of impingement of an oblique shock wave on a cylinder. The study was undertaken to understand the three-dimensional shock wave and boundary-layer interactions occurring on problems such as the impingement of the bow shock wave from the Shuttle nose on an external tank, and store-carriage interference on a supersonic tactical aircraft. A thin-layer approximation of the Navier-Stokes equations is solved by a mixed explicit-implicit scheme for a supersonic Mach 4 flow with an incident shock angle of 25 deg. Both laminar and turbulent flows are investigated. Surface pressures show large extents of upstream influence, except near windward plane. Based on plots of velocity at the first mesh points above the cylinder body, a conjectured limiting-streamline pattern is constructed. Three-dimensional separation is studied, and the role of crossflow is discussed.

Hung, C. M.↗
NASA NTRS1992

Spacecraft dynamical distribution of fluid stresses activated by gravity-jitter-induced slosh waves

The dynamical behavior of fluids, in particular the effect of surface tension on partially filled rotating fluids (cryogenic liquid helium and helium vapor) in a full-scale Gravity Probe-B Spacecraft propellant Dewar tank imposed by various frequencies of gravity jitters, has been investigated. Fluid stress distribution, caused by the excitation of slosh waves and their associated large-amplitude disturbances on the liquid-vapor interface, exerted on the outer and inner walls of a rotating Dewar container also has been investigated. Results show that fluid stress distributions near the outer and inner walls of the rotating Dewar are closely related to the characteristics of slosh waves excited on the liquid-vapor interface in the rotating Dewar tank. This can provide a useful tool for managing spacecraft dynamic control leading toward the control of spacecraft imbalance caused by the uneven fluid stress distribution due to slosh wave excitations at the interface between liquid and vapor propellants.

Hung, R. J.↗
NASA NTRS1955

NACA Model Investigations of Seaplanes in Waves

The models, apparatus, and instrumentation developed for investigations of the rough-water characteristics of seaplanes in the Langley tanks are described briefly. The results of several investigations to improve these characteristics are combined and summarized. The large effect of waves in take-off resistance is illustrated. The general relationship of the measured quantities of importance to wave length and height are also illustrated.

Parkinson, John B↗
NASA NTRS1992

Gravity jitter induced slosh waves in liquid propellant and disturbances of fluid stresses on spacecraft

The paper investigates the dynamical behavior of fluids, in particular the effect of surface tension on partially filled rotating fluids (cryogenic liquid helium and helium vapor) in a full-scale Gravity Probe-B spacecraft propellant dewar tank imposed by various frequencies of gravity jitters. Fluid stress distribution caused by the excitation of slosh waves and their associated large amplitude disturbances on the liquid-vapor interface and exerted on the outer and inner walls of a rotating dewar container are also examined. It is shown that fluid stress distributions near the outer and inner walls of the rotating dewar are closely related to the characteristics of slosh waves excited in the liquid-vapor interface in the rotating dewar tank. This can be of utility in managing spacecraft dynamic control leading to control of spacecraft imbalance caused by the uneven fluid stress distribution due to slosh wave excitations at the interface between liquid and vapor propellants.

Hung, R. J.↗
NASA NTRS2005

Microwave and Millimeter Wave Testing for the Inspection of the Space Shuttle Spray on Foam Insulations (SOFI) and the Acreage Heat Tiles

The utility of microwave and millimeter wave nondestructive testing and evaluation (NDT&E) methods, for testing the Space Shuttle's external he1 tank spray on foam insulation (SOFI) and the acreage heat tiles has been investigated during the past two years. Millimeter wave NDE techniques are capable of producing internal images of SOFI. This paper presents the results of testing several diverse panels with embedded voids and debonds at millimeter wave frequencies. Additionally, the results of testing a set of heat tiles are also presented. Finally, the attributes of these methods as well as the advantageous features associated with these systems are also provided.

Zoughi, R.↗
NASA NTRS2015

Modeling of Non-Isothermal Cryogenic Fluid Sloshing

A computational fluid dynamic model was used to simulate the thermal destratification in an upright self-pressurized cryostat approximately half-filled with liquid nitrogen and subjected to forced sinusoidal lateral shaking. A full three-dimensional computational grid was used to model the tank dynamics, fluid flow and thermodynamics using the ANSYS Fluent code. A non-inertial grid was used which required the addition of momentum and energy source terms to account for the inertial forces, energy transfer and wall reaction forces produced by the shaken tank. The kinetics-based Schrage mass transfer model provided the interfacial mass transfer due to evaporation and condensation at the sloshing interface. The dynamic behavior of the sloshing interface, its amplitude and transition to different wave modes, provided insight into the fluid process at the interface. The tank pressure evolution and temperature profiles compared relatively well with the shaken cryostat experimental test data provided by the Centre National D'Etudes Spatiales.

Cryogenics↗
NASA NTRS2018

Spectral Mass Gauging of Unsettled Liquid with Acoustic Waves

Propellant mass gauging is one of the key technologies required to enable the next step in NASA's space exploration program. At present, there is no reliable method to accurately measure the amount of unsettled liquid propellant of an unknown configuration in a propellant tank in micro- or zero gravity. We propose a new approach to use sound waves to probe the resonance frequencies of the two-phase liquid-gas mixture and take advantage of the mathematical properties of the high frequency spectral asymptotics to determine the volume fraction of the tank filled with liquid. We report the current progress in exploring the feasibility of this approach, both experimental and theoretical. Excitation and detection procedures using solenoids for excitation and both hydrophones and accelerometers for detection have been developed. A 3% uncertainty for mass-gauging was demonstrated for a 200-liter tank partially filled with water for various unsettled configurations, such as tilts and artificial ullages. A new theoretical formula for the counting function associated with axially symmetric modes was derived. Scaling analysis of the approach has been performed to predict an adequate performance for in-space applications.

Feller, Jeffrey↗
NASA NTRS1992

Numerical simulation of spacecraft propellant tank draining characteristics

Liquid residual at the incipience of suction dip, and slosh wave excitation under normal and various reduced gravity environments and different flow rates of liquid have been investigated during the liquid hydrogen draining. It shows that the liquid residual at the incipience of suction dip increases as the values of gravity environment decrease from normal gravity ot lower reduced gravity. Flow fields with lower flow rates of liquid draining are responsible for the excitation higher wave amplitude slosh waves.

Hung, R. J.↗
NASA NTRS1991

Slosh wave excitation in the gravity probe-B spacecraft propulsion system

The dynamical behavior of fluids in a Gravity Probe-B Spacecraft tank imposed by various frequencies of gravity jitters have been investigated. Fluid stress distribution also have been investigated. Results show that fluid stress distribution exerted on the outer and inner walls of rotating dewar are closely related to the characteristics of slosh waves excited on the liquid-vapor interface in the rotating dewar tank.

Hung, R. J.↗
NASA NTRS1981

Ice/frost detection using millimeter wave radiometry

A series of ice detection tests was performed on the shuttle external tank (ET) and on ET target samples using a 35/95 GHz instrumentation radiometer. Ice was formed using liquid nitrogen and water spray inside a test enclosure containing ET spray on foam insulation samples. During cryogenic fueling operations prior to the shuttle orbiter engine firing tests, ice was formed with freon and water over a one meter square section of the ET LOX tank. Data analysis was performed on the ice signatures, collected by the radiometer, using Georgia Tech computing facilities. Data analysis technique developed include: ice signature images of scanned ET target; pixel temperature contour plots; time correlation of target data with ice present versus no ice formation; and ice signature radiometric temperature statistical data, i.e., mean, variance, and standard deviation.

Gagliano, J. A.↗
NASA NTRS1991

Slosh wave excitation due to cryogenic liquid reorientation in space-based propulsion system

The objective of the cryogenic fluid management of the spacecraft propulsion system is to develop the technology necessary for acquistion or positioning of liquid and vapor within a tank in reduced gravity to enable liquid outflow or vapor venting. In this study slosh wave excitation induced by the resettling flow field activated by 1.0 Hz medium frequency impulsive reverse gravity acceleration during the course of liquid fluid reorientation with the initiation of geyser for liquid filled levels of 30, 50, and 80 percent have been studied. Characteristics of slosh waves with various frequencies excited are discussed.

Hung, R. J.↗