Search NASA⌕ Search

SEARCH · Search NASA

Results for “weathering processes in soils”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS2014

Nanophase Carbonates on Mars: Implications for Carbonate Formation and Habitability

Despite having an atmosphere composed primarily of CO2 and evidence for abundant water in the past, carbonate minerals have only been discovered in small amounts in martian dust [1], in outcrops of very limited extent [2, 3], in soils in the Northern Plains (the landing site of the 2007 Phoenix Mars Scout Mission) [4] and may have recently been detected in aeolian material and drilled and powdered sedimentary rock in Gale Crater (the Mars Science Laboratory [MSL] landing site) [5]. Thermal analysis of martian soils by instruments on Phoenix and MSL has demonstrated a release of CO2 at temperatures as low as 250-300 degC, much lower than the traditional decomposition temperatures of calcium or magnesium carbonates. Thermal decomposition temperature can depend on a number of factors such as instrument pressure and ramp rate, and sample particle size [6]. However, if the CO2 released at low temperatures is from carbonates, small particle size is the only effect that could have such a large impact on decomposition temperature, implying the presence of extremely fine-grained (i.e., "nanophase" or clay-sized) carbonates. We hypothesize that this lower temperature release is the signature of small particle-sized (clay-sized) carbonates formed by the weathering of primary minerals in dust or soils through interactions with atmospheric water and carbon dioxide and that this process may persist under current martian conditions. Preliminary work has shown that clay-sized carbonate grains can decompose at much lower temperatures than previously thought. The first work took carbonate, decomposed it to CaO, then flowed CO2 over these samples held at temperatures >100 degC to reform carbonates. Thermal analysis confirmed that carbonates were indeed formed and transmission electron microsopy was used to determine crystal sized were on the order of 10 nm. The next step used minerals such as diopside and wollastonite that were sealed in a glass tube with a CO2 and H2O source. After reacting these materials for a number of hours, thermal analysis demonstrated the formations of carbonates that decomposed at temperatures as low as 500 degC [7]. Further work is underway to carry out the weathering process under more Mars-like conditions (low pressure and low temperature) to determine if the carbonate decomposition temperature can be shifted to even lower temperatures, consistent with what has been detected by thermal analysis instruments on Mars.

Archer, P. Douglas, Jr.↗
NASA NTRS1979

Machine intelligence and robotics: Report of the NASA study group. Executive summary

A brief overview of applications of machine intelligence and robotics in the space program is given. These space exploration robots, global service robots to collect data for public service use on soil conditions, sea states, global crop conditions, weather, geology, disasters, etc., from Earth orbit, space industrialization and processing technologies, and construction of large structures in space. Program options for research, advanced development, and implementation of machine intelligence and robot technology for use in program planning are discussed. A vigorous and long-range program to incorporate and keep pace with state of the art developments in computer technology, both in spaceborne and ground-based computer systems is recommended.

Source record↗
NASA NTRS2012

Rates of Space Weathering in Lunar Regolith Grains

While the processes and products of lunar space weathering are reasonably well-studied, their accumulation rates in lunar soils are poorly constrained. Previously, we showed that the thickness of solar wind irradiated rims on soil grains is a smooth function of their solar flare particle track density, whereas the thickness of vapor-deposited rims was largely independent of track density [1]. Here, we have extended these preliminary results with data on additional grains from other mature soils.

Zhang, S.↗
DOE OSTI2024

An Adaptive Dynamic Agrivoltaic Production Tool

In the pursuit of sustainable and land-use-efficient solutions to mitigate climate change, the concept of agrivoltaic systems, which integrate renewable solar energy into conventional agriculture, has emerged. By deploying solar arrays above the crop field, these systems are designed to maximize the land use efficiency or, in other words, the value of generated electricity and crop yield per unit area. While power generation has been extensively studied and modeled, research gaps persist in simulating crop performance [1], [2]. Early studies utilized generalized relationships between photosynthetically active radiation (PAR) and crop production. However, significant variations in crop performance due to other factors, such as weather and soil, can compromise the reliability of the results [2]. Current studies focus on comprehensive process-based crop models, such as DSSAT [3] and STICS [4]. Nevertheless, the validation status varies greatly across different species, and the validation process requires well-designed experiments to adjust specific processes. For less common shade-tolerant crops with limited validation, such as cabbage, physiological behaviors can be difficult to predict [5]. This study investigates an adaptive dynamic agrivoltaic production tool (ADAPT) with few data requirements and minimal on-site calibration that can be easily applied in real applications.

Long, Qirui↗
DOE OSTI2021

Empirical estimation of weather-driven yield shocks using biophysical characteristics for U.S. rainfed and irrigated maize, soybeans, and winter wheat

Agricultural yields are highly susceptible to changes in weather system patterns, including both annual and sub-annual changes in temperature and precipitation. Understanding the impacts of future changes in meteorological variables on crop yields have been widely studied in both empirical and process-based models. This work presents a structural econometric approach that combines historical weather data with information about the biophysical growth cycles of maize, winter wheat, and soy to predict the year-to-year yield responses for rainfed crops. Modeled soil moisture and temperature are taken as key predictors, which allows testing the fitted rainfed model’s ability to predict irrigated yields by assuming irrigation produces the numerically optimal level of soil moisture. This approach is grounded in known biophysical processes, which improves confidence in the model predictions. It produces estimates of interannual variability in yields, which enable study of the effects of extreme events on agricultural productivity. Finally, it enables prediction of the potential impacts of changing weather patterns on irrigated crops in areas that are currently primarily rainfed. We present the results of the empirical model, fitted with rainfed data; out-of-sample validation on irrigated crops; and projections of yield shocks under multiple future climate scenarios. Under a bias-corrected GFDL RCP8.5 scenario, this approach predicts average yield change, relative to 2006-2020 average yields, across U.S. counties in the 2040-2060 period of -16.9% and -13.4% for rainfed and irrigated maize, of -19.1% and -18.4% for rainfed and irrigated soy, and of -4.0% and -2.0% for rainfed and irrigated winter wheat. And in the 2070-2090 period of -30.3% and -28.8 % for rainfed and irrigated maize, of -33.1% and -32.8% for rainfed and irrigated soy, and of -6.5% and -5.2%for rainfed and irrigated winter wheat.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Deep Roots Supply Reactivity and Enhance Silicate Weathering in the Bedrock Vadose Zone

In upland environments, roots commonly extend deep below soil into partially saturated bedrock. This Bedrock Vadose Zone (BVZ) has been shown to store and circulate water, host organic carbon respiration and serve as a critical source of rock-derived nutrients. However, the extent to which deep roots influence chemical weathering rates remains poorly understood. Here, we report 4 years of depth-resolved major ion chemistry over a 16-m thick BVZ hosting a deep rhizosphere in a catchment subject to a Mediterranean climate. These data allow development and validation of a reactive transport model (RTM), revealing that the timescales of water storage and drainage in the BVZ are sufficient to facilitate substantial chemical weathering of the shale bedrock. However, observed solute concentrations are only reproduced by the RTM when we explicitly include measured rates of CO 2(g) production meters below soil driven by the deeply rooted forest. By combining direct observations and a process-based RTM we conclude that the carbon respiration promoted by deep roots significantly enhances chemical weathering rates in the BVZ, constituting 43% ± 3% of total solute flux from the base of the BVZ to the water table.

Osorio‐Leon, Ivan D. [University of Illinois Urban↗
NASA NTRS1992

Preliminary results of polarization signatures for glacial moraines in the Mono Basin, Eastern Sierra Nevada

The valleys of the Mono Basin contain several sets of lateral and terminal moraines representing multiple stages of glaciation. The semi-arid climate with slow weathering rates preserved sequences of nested younger moraines within older ones. There is a well established relative chronology and recently exposure dating provided a new set of numerical dates. The moraines span the late Wisconsin (11-25 ka) to the Illinoian (130-190 ka) glaciations. The Mono Basin area was used as a 'calibration site' to establish remote dating techniques for eventual transfer to the more inaccessible but geomorphically and climatically similar moraines of the South American Andes Mountains. Planned polarimetric synthetic aperture radar (SAR) imagery acquired by JPL AIRSAR (South American Campaign) and SIR-C (Andes super-site) are analyzed to establish chronologies of previously undated moraine sequences in a study of Pleistocene climatic change in the Southern Hemisphere. The dry climate and sparse vegetation is also favorable for correlation of ground surface roughness with radar polarization signature. The slow weathering processes acting over thousands of years reduce the size, frequency, and angularity of surface boulders while increasing soil development on the moraines. Field observations based on this hypothesis result in relative ages consistent with those inferred from nested position within the valley. Younger moraines, therefore, will appear rougher than the older smoother moraines at scales measurable at AIRSAR wavelengths. Previously documented effects of ground surface roughness on polarization signatures suggest that analysis of moraine polarization signatures can be useful for relative dating. The technique may be extended to predict numerical ages. The data set reported were acquired on 8 Sep. 1989 with the JPL Airborne SAR (AIRSAR) collecting polarimetric imagery at C- (5.6 cm), L- (24 cm), and P-band (68 cm) with a flight-line parallel to the strike of the mountains. Phase calibration was performed on the analyzed scene by setting the co-phase of a smooth lake to zero as described. Absolute amplitude calibration was not possible because corner reflectors were not deployed.

Forster, Richard R.↗
NASA NTRS1989

Characterization of Venera 15/16 Geologic Units from Pioneer Venus Reflectivity and Roughness Data

Geologic units have been defined for the surface of Venus from Venera 15/16 image data. A characterization of these geologic units is carried out using information on surface properties derived from Pioneer Venus (PV) reflectivity and rms slope data. The geologic context provided by Venera 15/16 units allows additional, more specific interpretations of surface radar properties to be made. Characterization of Venera units results in the definition of four groups of Venera units: (1) smooth rocky units, 2) rough rocky units, (3) rough high dielectric units, and (4) diffusely scattering units. On the basis of correlations of surface morphology to spatial and statistical distributions in rms slope and reflectivity data, we test models for the origin of the surface properties of some units. We conclude that plains and tectonic units can be contrasted in terms of the average roughness of the surface and that tectonic deformation appears to roughen the surface at 0.5- to 10-m and 5- to 50-cm scales. This tectonic weathering process appears to dominate the erosional regime of Venus. Unlike Earth or Mars, production and transport of soils dominates only a small portion (less than or equal to 5%) of the surface. Some of the Venera units display distinctive spatial and statistical distributions of PV radar data. In particular, apparent low reflectivity in the tesserae appears to be caused by small (5-50 cm) rock fragments on the surface which cause diffuse scattering at Pioneer Venus wavelengths. Analysis of models for the formation of these fragments suggests that they are due to the pervasive deformation undergone by the tesserae. Finally, aspects of this study have been used to extend results of Venera image data analysis southward of 30 deg. N lat, resulting in it prediction of the distribution of tessera. Such results can aid in Magellan investigations.

Bindschadler, D. L.↗
NASA NTRS2011

Diagnosing the Sensitivity of Local Land-Atmosphere Coupling via the Soil Moisture-Boundary Layer Interaction

The inherent coupled nature of earth s energy and water cycles places significant importance on the proper representation and diagnosis of land atmosphere (LA) interactions in hydrometeorological prediction models. However, the precise nature of the soil moisture precipitation relationship at the local scale is largely determined by a series of nonlinear processes and feedbacks that are difficult to quantify. To quantify the strength of the local LA coupling (LoCo), this process chain must be considered both in full and as individual components through their relationships and sensitivities. To address this, recent modeling and diagnostic studies have been extended to 1) quantify the processes governing LoCo utilizing the thermodynamic properties of mixing diagrams, and 2) diagnose the sensitivity of coupled systems, including clouds and moist processes, to perturbations in soil moisture. This work employs NASA s Land Information System (LIS) coupled to the Weather Research and Forecasting (WRF) mesoscale model and simulations performed over the U.S. Southern Great Plains. The behavior of different planetary boundary layers (PBL) and land surface scheme couplings in LIS WRF are examined in the context of the evolution of thermodynamic quantities that link the surface soil moisture condition to the PBL regime, clouds, and precipitation. Specifically, the tendency toward saturation in the PBL is quantified by the lifting condensation level (LCL) deficit and addressed as a function of time and space. The sensitivity of the LCL deficit to the soil moisture condition is indicative of the strength of LoCo, where both positive and negative feedbacks can be identified. Overall, this methodology can be applied to any model or observations and is a crucial step toward improved evaluation and quantification of LoCo within models, particularly given the advent of next-generation satellite measurements of PBL and land surface properties along with advances in data assimilation schemes.

Santanello, Joseph A., Jr.↗
NASA NTRS1977

The search for the cause of the low albedo of the moon

The effects of different weathering processes on the albedo of the lunar surface cover is discussed. The surface chemical composition of numerous lunar soil and pulverized rock samples was determined by auger electron spectroscopy. The optical albedo of these samples was also measured. The chemical concentration of iron and titanium is greater on the surface of soil samples than it is on the surface of crushed rock samples with similar bulk composition, whereas the albedo of soil samples is lower than that of the crushed rock samples. A correlation is presented between the surface iron + titanium content and the albedo. Results of solar wind simulation experiments show that irradiation of crushed lunar rock samples with a small dose (corresponding to 3000 years of solar wind) of 2-keV energy protons changed the surface chemistry of the rock to that of the soil. A much larger dose of protons (corresponding to 30,000 years of solar wind) was needed to darken crushed rock to the albedo of the soil of similar bulk chemical composition. The mechanism of darkening by solar wind is discussed, and its effectiveness is compared to that of other darkening processes.

Gold, T.↗
DOE OSTI2026

Model‐Based Interpretation of Solute Exports and Carbon Partitioning During Shale Weathering in a Mountainous Hillslope

The weathering of sedimentary rocks in high-elevation catchments influences freshwater quality and the global carbon cycle. While individual biogeochemical mechanisms involved in this process are relatively well understood, quantifying their contributions to solute export and carbon fluxes under natural, transient conditions remains challenging. Here, we implement a numerical multidimensional and multiphase model to simulate coupled hydrological and biogeochemical processes in a shale-underlain, snow-dominated hillslope in the Rocky Mountains, Colorado. The model captures the dynamic interplay between soil respiration, mineral weathering, and climate-driven hydrological forcing, reproducing observed soil CO 2 dynamics, groundwater chemistry, and subsurface flow. Our results reveal that seasonal snowmelt enhances carbonate weathering by promoting the infiltration of CO 2 -rich water to depth, while pyrite oxidation is primarily sensitive to low water saturation that facilitates O 2 diffusion through the regolith. Topography modulates the spatial distribution of shale weathering, as steeper slopes enhance lateral drainage, favoring the delivery of reactants to greater depths. While shale weathering at our site acts as a transient carbon sink, with silicates and carbonates buffering acidity and promoting atmospheric CO 2 consumption (1% of soil-derived CO 2 ), the exported dissolved inorganic carbon is predominantly geogenic (∼73%). Consequently, when accounting for long-term marine carbonate precipitation. The current weathering regime represents a net source of carbon to the atmosphere. The oxidation of pyrite and petrogenic organic carbon together release approximately 0.9 mol·m −2 ·yr −1 of CO 2 . Our findings highlight the role of topography, hydroclimate, and the coupling between acid-base reactions in shaping the carbon balance and the solute exports in mountainous critical zones.

carbon cycling↗
NASA NTRS2016

Direct Determination of the Space Weathering Rates in Lunar Soils and Itokawa Regolith from Sample Analyses

Space weathering effects on airless bodies result largely from micrometeorite impacts and solar wind interactions. Decades of research have provided insights into space weathering processes and their effects, but a major unanswered question still remains: what is the rate at which these space weathering effects are acquired in lunar and asteroidal regolith materials? To determine the space weathering rate for the formation of rims on lunar anorthite grains, we combine the rim width and type with the exposure ages of the grains, as determined by the accumulation of solar flare particle tracks. From these analyses, we recently showed that space weathering effects in mature lunar soils (both vapor-deposited rims and solar wind amorphized rims) accumulate and attain steady state in 10(sup 6)-10(sup 7) y. Regolith grains from Itokawa also show evidence for space weathering effects, but in these samples, solar wind interactions appear to dominate over impactrelated effects such as vapor-deposition. While in our lunar work, we focused on anorthite, given its high abundance on the lunar surface, for the Itokawa grains, we focused on olivine. We previously studied 3 olivine grains from Itokawa and determined their solar flare track densities and described their solar wind damaged rims]. We also analyzed olivine grains from lunar soils, measured their track densities and rim widths, and used this data along with the Itokawa results to constrain the space weathering rate on Itokawa. We observe that olivine and anorthite have different responses to solar wind irradiation.

Keller, L. P.↗
NASA NTRS2015

An Overview of Production and Validation of the SMAP Passive Soil Moisture Product

The Soil Moisture Active Passive (SMAP) mission is an L-band mission scheduled for launch in Jan. 2015. The SMAP instruments consist of a radar and a radiometer to obtain complementary information from space for soil moisture and freeze/thaw state research and applications. By utilizing novel designs in antenna construction, retrieval algorithms, and acquisition hardware, SMAP provides a capability for global mapping of soil moisture and freeze/thaw state with unprecedented accuracy, resolution, and coverage. This improvement in hydrosphere state measurement is expected to advance our understanding of the processes that link the terrestrial water, energy and carbon cycles, improve our capability in flood prediction and drought monitoring, and enhance our skills in weather and climate forecast. For swath-based soil moisture measurement, SMAP generates three operational geophysical data products: (1) the radiometer-only soil moisture product (L2_SM_P) posted at 36-kilometer resolution, (2) the radar-only soil moisture product (L2_SM_A) posted at 3-kilometers resolution, and (3) the radar-radiometer combined soil moisture product (L2_SM_AP) posted at 9-kilometers resolution. Each product draws on the strengths of the underlying sensor(s) and plays a unique role in hydroclimatological and hydrometeorological applications. A full suite of SMAP data products is given in Table 1.

passive microwave↗
NASA NTRS2009

The Evolution and Development of the Lunar Regolith and Implications for Lunar Surface Operations and Construction

The lunar regolith consists of about 90% submillimeter particles traditionally termed lunar soil. The remainder consists of larger particles ranging up to boulder size rocks. At the lower size end, soil particles in the 10s of nanometer sizes are present in all soil samples. Lunar regolith overlies bedrock which consists of either lava flows in mare regions or impact-produced megaregolith in highland regions. Lunar regolith has been produced over billions of years by a combination of breaking and communition of bedrock by meteorite bombardment coupled with a variety of complex space weathering processes including solar wind implantation, solar flare and cosmic ray bombardment with attendant radiation damage, melting, vaporization, and vapor condensation driven by impact, and gardening and turnover of the resultant soil. Lunar regolith is poorly sorted compared to most terrestrial soils, and has interesting engineering properties including strong grain adhesion, over-compacted soil density, an abundance of agglutinates with sharp corners, and a variety of properties related to soil maturity. The NASA program has supported a variety of engineering test research projects, the production of bricks by solar or microwave sintering, the production of concrete, the in situ sintering and glazing of regolith by microwave, and the extraction of useful resources such as oxygen, hydrogen, iron, aluminum, silicon and other products. Future requirements for a lunar surface base or outpost will include construction of protective berms, construction of paved roadways, construction of shelters, movement and emplacement of regolith for radiation shielding and thermal control, and extraction of useful products. One early need is for light weight but powerful digging, trenching, and regolith-moving equipment.

McKay, David↗
NASA NTRS2018

Potential High Priority Subaerial Environments for Mars Sample Return

Subaerial environments of interest for Mars Sample Return include surface or near-surface sites not covered by a body of water, but having direct access to water from precipitation, snow melt, or ambient-temperature groundwater. This includes soils, wetlands, ephemeral ponds, cold springs, and periglacial/glacial environments, with paleosol profiles as a high priority collection site. Such soils can be topped by aqueously deposited sediments and precipitates from wetlands, ephemeral ponds, and springs. The composition and morphology of paleosols preserve evidence of past climate, aqueous conditions, and life. Key topics addressed by samples collected from subaerial environments include: 1) Constrain the duration of interaction with liquid water by investigating a weathering profile from the surface to unaltered parent material. 2) Assess the characteristics of past liquid water, and how it has changed through time. 3) Investigate weathered materials such as soils, paleosols, sediments, weathering rinds or rock coatings to assess past climate. 4) Examine characteristics of past aeolian and atmospheric processes.

Source record↗
DOE OSTI2023

Fungal organic acid uptake of mineral-derived K is dependent on distance from carbon hotspot

Fungal mineral weathering regulates the bioavailability of inorganic nutrients from mineral surfaces to organic matter and increase the bioavailable fraction of nutrients. Such weathering strategies are classified as biomechanical or biochemical. In the case of fungal uptake of mineral nutrients through biochemical weathering, it is widely hypothesized that uptake of inorganic nutrients occurs through organic acid chelation, but such processes have not been directly visualized. This is in part due to challenges in probing the complex and heterogeneous soil environment. Here, using an epoxy-based, mineral-doped soil micromodel platform, which emulates soil mineralogy and porosity, we visualize the molecular mechanisms of mineral weathering. Mass spectrometry imaging revealed differences in the distribution of fungal exudates, citric acid, and tartaric acid on the soil micromodels in presence of minerals. Citric acid was detected closer to the nutrient-rich inoculation point, whereas tartaric acid was highly abundant away from inoculation point. This suggested that the organic acid exuded by the fungi depended on the proximity from the carbon-rich organic substrate at the point of inoculation. Using a combination of X-ray fluorescence and X-ray near edge structure analysis, we identified citric acid- and tartaric acid-bound K within fungal hyphae networks grown in the presence of minerals. Combined, our results provide direct evidence that fungi uptake and transport mineral derived nutrient organic acid chelation. The results of this study provided unprecedented visualization of fungal uptake and transport of K + , while resolving the indirect weathering mechanism of fungal K uptake from mineral interfaces.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS2006

An Overview of Moessbauer Mineralogy at Gusev Crater, Mars

The Mars Exploration Rover (MER) Spirit landed on the plains of Gusev Crater on 4 January 2004 [1]. The scientific objective of the Moessbauer (MB) spectrometer on Spirit is to provide quantitative information about the distribution of Fe among its oxidation and coordination states, identification of Fe-bearing phases, and relative distribution of Fe among those phases. The speciation and distribution of Fe in Martian rock and soil constrains the primary rock types, redox conditions under which primary minerals crystallized, the extent of alteration and weathering, the type of alteration and weathering products, and the processes and environmental conditions for alteration and weathering.We discuss the Fe-bearing phases detected by Spirit s MB instrument during its first 540 sols of exploration [2,3]. Spirit roved eastward across the plains from its landing site to the Columbia Hills during the first approx.150 sols. Rocks are unweathered to weakly weathered olivine basalt, with olivine, pyroxene (Ol > Px), magnetite (Mt), and minor hematite (Hm) and nanophase ferric oxide (npOx) as their primary Fe-bearing minerals. Soils are generally similar basaltic materials, except that the proportion of npOx is much higher (up to approx.40%). NpOx is an oct-Fe3+ alteration product whose concentration is highest in fine-grained soils and lowest in rock interiors exposed by grinding with the Rock Abrasion Tool (RAT). Spirit explored the lower slopes of the Columbia Hills (West Spur) during sols approx.150-320. West Spur rocks are highly altered, even for interior surfaces exposed by grinding (Fe3+/FeT approx.0.56-0.84). High concentrations of npOx, Hm, and Mt are present. One rock (Clovis) contains significant quantities of goethite (alpha-FeOOH; approx.40% of total Fe). The detection of goethite is very significant because it is a mineralogical marker for aqueous alteration.

Klingelhoefer, G.↗
NASA NTRS2016

Transitioning Enhanced Land Surface Initialization and Model Verification Capabilities to the Kenya Meteorological Department (KMD)

Flooding, severe weather, and drought are key forecasting challenges for the Kenya Meteorological Department (KMD), based in Nairobi, Kenya. Atmospheric processes leading to convection, excessive precipitation and/or prolonged drought can be strongly influenced by land cover, vegetation, and soil moisture content, especially during anomalous conditions and dry/wet seasonal transitions. It is thus important to represent accurately land surface state variables (green vegetation fraction, soil moisture, and soil temperature) in Numerical Weather Prediction (NWP) models. The NASA SERVIR and the Short-term Prediction Research and Transition (SPoRT) programs in Huntsville, AL have established a working partnership with KMD to enhance its regional modeling capabilities. SPoRT and SERVIR are providing experimental land surface initialization datasets and model verification capabilities for capacity building at KMD. To support its forecasting operations, KMD is running experimental configurations of the Weather Research and Forecasting (WRF; Skamarock et al. 2008) model on a 12-km/4-km nested regional domain over eastern Africa, incorporating the land surface datasets provided by NASA SPoRT and SERVIR. SPoRT, SERVIR, and KMD participated in two training sessions in March 2014 and June 2015 to foster the collaboration and use of unique land surface datasets and model verification capabilities. Enhanced regional modeling capabilities have the potential to improve guidance in support of daily operations and high-impact weather and climate outlooks over Eastern Africa. For enhanced land-surface initialization, the NASA Land Information System (LIS) is run over Eastern Africa at ~3-km resolution, providing real-time land surface initialization data in place of interpolated global model soil moisture and temperature data available at coarser resolutions. Additionally, real-time green vegetation fraction (GVF) composites from the Suomi-NPP VIIRS instrument is being incorporated into the KMD-WRF runs, using the product generated by NOAA/NESDIS. Model verification capabilities are also being transitioned to KMD using NCAR's Model *Corresponding author address: Jonathan Case, ENSCO, Inc., 320 Sparkman Dr., Room 3008, Huntsville, AL, 35805. Email: Jonathan.Case-1@nasa.gov Evaluation Tools (MET; Brown et al. 2009) software in conjunction with a SPoRT-developed scripting package, in order to quantify and compare errors in simulated temperature, moisture and precipitation in the experimental WRF model simulations. This extended abstract and accompanying presentation summarizes the efforts and training done to date to support this unique regional modeling initiative at KMD. To honor the memory of Dr. Peter J. Lamb and his extensive efforts in bolstering weather and climate science and capacity-building in Africa, we offer this contribution to the special Peter J. Lamb symposium. The remainder of this extended abstract is organized as follows. The collaborating international organizations involved in the project are presented in Section 2. Background information on the unique land surface input datasets is presented in Section 3. The hands-on training sessions from March 2014 and June 2015 are described in Section 4. Sample experimental WRF output and verification from the June 2015 training are given in Section 5. A summary is given in Section 6, followed by Acknowledgements and References.

land surface modeling↗