SEARCH · Search NASA
Results for “wet oxidation”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Comparative S/TEM study of superconducting Ta quantum resonators by wet and dry etching types
Superconducting resonators play a pivotal role in various quantum technology applications, such as quantum computing and high-frequency communication systems. The performance of these resonators is closely tied to the properties of the superconducting films used in their fabrication. Here, in this study, we investigated the impact of wet and dry etching on tantalum (Ta) films leveraging advanced scanning transmission electron microscopy-based characterization methods and examined the morphological, chemical, and strain changes caused by the etching processes. Consequently, we report the significant differences between the two etching methods, with dry etching resulting in straight slanted sidewalls and a thinner oxidized layer, while wet etching produced curved sidewalls and undercuts. Both methods led to the formation of a residual Ta wedge at the lower part of the sidewall, causing lattice deformation, which could adversely influence the homogeneous operations of superconducting devices. These insights enhance our understanding of how etching influences superconducting films, offering valuable guidance for optimizing resonators and related devices. Our findings mark a significant stride in advancing quantum technologies and high-frequency communication by enhancing our practical understanding of superconducting material fabrication.
Thermally grown oxide and diffusions for automatic processing of integrated circuits
A totally automated facility for semiconductor oxidation and diffusion was developed using a state-of-the-art diffusion furnace and high temperature grown oxides. Major innovations include: (1) a process controller specifically for semiconductor processing; (2) an automatic loading system to accept wafers from an air track, insert them into a quartz carrier and then place the carrier on a paddle for insertion into the furnace; (3) automatic unloading of the wafers back onto the air track, and (4) boron diffusion using diborane with plus or minus 5 percent uniformity. Processes demonstrated include Wet and dry oxidation for general use and for gate oxide, boron diffusion, phosphorous diffusion, and sintering.
Pyrogenic Organic Matter Laboratory Experiment: Aerobic Respiration and Geochemistry from Variably Inundated Stream Sediments (v3)
This dataset supports a broader study examining the effects of variable inundation and pyrogenic organic matter on ecosystem respiration. The dataset provides data generated from a laboratory batch experiment investigating the interaction between variable inundation conditions (wet and dry sediment) and pyrogenic organic matter (burned and unburned treatments). The contents include time series dissolved oxygen, sediment geochemistry data, and field metadata (including qualitative information on instream and river corridor characteristics). This data package was originally published in November 2025. It was updated in April 2026 (v2; new and modified files) and May 2026 (v3; modified files). See the change history section in the readme for more details For details on how to navigate data packages generated by this project, see https://data.ess-dive.lbl.gov/portals/PNNLRiverCorridorSFA/About. In addition to a readme, this data package also includes a file-level metadata (FLMD) file that describes each file and a data dictionary (DD) that describes all column/row headers and variable definitions. This dataset is comprised of (1) file-level metadata; (2) data dictionary; (3) field metadata; (4) international generic sample number (IGSN) mapping file; (5) readme; (6) field protocol; (7) sample name metadata; (8) an environmental context picture for the dry and inundated sampling locations; and (9) a subfolder with sample data from the sediment incubation experiment. The sample data subfolder contains (1) dissolved organic carbon (DOC, measured as non-purgeable organic carbon, NPOC); (2) total nitrogen (TN); (3) gravimetric moisture; (4) partial pressure and production rates of carbon dioxide, methane, and nitrous oxide; (5) field wet sediment mass, dry sediment mass, water mass, and field wet sediment volume in incubation and sediment NPOC/TN vials; (6) methods codes; (7) respiration rates, pH, and temperature from after the incubation, raw time series dissolved oxygen and temperature, and a subfolder containing associated plots and scripts; (8) ions; (9) FTICR-MS methods; and (10) a subfolder of 12 Tesla (12T) FTICR-MS data. This folder contains the CoreMS processed data and three subfolders, one containing the .xml files, one containing the CoreMS output files, and the other containing instructions and scripts for processing the files in CoreMS (https://github.com/EMSL-Computing/CoreMS). All files are .csv, .pdf, .R, .xml, .html, .Rmd, .py, .cal, .json, or .jpg.
Changes in Hydrogen Concentration and Defect State Density at the Poly-Si/SiOx/c-Si Interface Due to Firing
We determined the density of defect states of poly-Si/SiOx/c-Si junctions featuring a wet chemical interfacial oxide from lifetime measurements using the MarcoPOLO model to calculate recombination and contact resistance in poly-Si/SiOx/c-Si-junctions. In samples that did not receive any hydrogen treatment, the Dit,cSi is about 2 × 1012 cm-2 eV1 before firing and rises to 3–7 × 1012 cm2 eV1 during firing at measured peak temperatures between 620 °C and 863 °C. To address the question of why AlOx/SiNy stacks in contrast to pure SiNy layers for hydrogenation during firing provides better passivation quality, we have measured the hydrogen concentrations at the poly-Si/SiOx/c-Si interface as a function of AlOx layer thickness and compared these to J0 and calculated Dit,c-Si values. We observe an increase of the hydrogen concentration at the SiOx/c-Si interface upon firing as a function of the firing temperature that exceeds the defect concentrations at the interface several times. However, the AlOx layer thickness appears to cause an increase in hydrogen concentration at the SiOx/c-Si interface in these samples rather than exhibiting a hydrogen blocking property.
Aged and unaged pine wood pyrogenic organic matter: mineralization, elemental analysis and spectroscopy data (February 2020)
In this study, we used a pyrogenic organic matter (PyOM) degrading Streptomyces isolate – a globally common soil bacterium – to investigate the effects of physical (freeze-thaw and wet-dry), chemical (oxidation), and biological (microbial community incubation) ageing on the chemical properties and mineralizability of 350°C and 550°C pine wood PyOM. We used Fourier Transform Infrared spectroscopy (FTIR) and elemental analysis to characterize the aged and unaged PyOM, and cavity ring-down spectroscopy to trace CO2 emissions. The carbon (C) mineralization data from incubation of aged and unaged PyOM with the isolate are provided in co2cmg_picarro_022020.csv. This dataset contains raw carbon dioxide (CO2) data measured on the cavity ring-down spectroscopy over 1 month of incubation. The dataset also includes processed data such as cumulative CO2 emitted over multiple cycles of measurement and CO2 values normalized by the total carbon content in each PyOM treatment. The carbon, hydrogen and nitrogen elemental content of aged and unaged 350°C and 550°C pine wood PyOM are provided in CHN_pyom.csv. The relative peak heights measured during the FTIR analysis of aged and unaged PyOM are provided in ftir_peaks_rel.csv.
An application of model testing for the study of rocket exhaust cloud properties
The application of the 6.4-percent Shuttle Model Test Facility to the study of the Shuttle exhaust cloud properties is discussed with emphasis on the properties related to the production of the deposition (submillimeter drops composed of an acidic liquid and alumina solids) which occurs with each launch. An analysis of test data suggests that the major fraction of the liquid in the deposition is produced directly through the interaction between the exhaust and the deluge water spray and then modified by rapid scavenging of wet acidic aluminum oxide particles. Based on this conclusion, the possibility arises that the acid in the deposition can be neutralized by addition of a base to the deluge water. Current work with the 6.4-percent model is directed toward verification of this hypothesis.
Development of Roll-to-Roll Simultaneous Multilayer Deposition Methods for Solid-state Electrochemical Devices using Highly Particulate Loaded Aqueous Inks
A platform for simultaneous multilayer roll-to-roll coating was developed for solid-state electrochemical devices through Saint-Gobain’s Solid Oxide Fuel Cell. Six wet layers were successfully coated one top of another using multilayer slide coating following design rules developed through a step-wise approach. Solid oxide fuel cells, which comprise of engineered ceramic films, were made with dual slot and multi-layer slide dies and shown to have similar performance to cells made with incumbent coating methods. Additionally, interlayers were coated below their individual singular low flow limits using simultaneous multilayer coating.
Combined chlorine dioxide–membrane distillation for the treatment of produced water
Membrane distillation (MD) is a promising technique for desalinating hypersaline brine, such as produced water (PW). To date, fouling and scaling have remained as major challenges for MD implementation. In this study, chlorine dioxide combined with induced air floatation (ClO 2 -IAF) was systematically investigated as a pretreatment prior to MD. First, the ClO 2 generation based on sodium chlorite and hydrochloric acid was optimized to maximize the on-demand ClO 2 production. The maximum production yield of 18.4% was obtained with 4wt.% NaClO 2 and 20wt.% HCl solutions, with a molar ratio of 1:1.25. Then, two real PW samples were pretreated, and removal efficiencies for total suspended solids (TSS), turbidity, iron, and total organic carbon (TOC) were comprehensively studied by varying the ClO 2 dosage between 6 and 91 mg/L. The ClO 2 -IAF pretreatment displayed TSS and turbidity removals above 90% and TOC removal close to 55%. Further, the PW constituents such as benzene, toluene, ethylbenzene, xylene (BTEX), and total petroleum hydrocarbons (TPH) were analyzed and quantified throughout the cascade of the treatments. The volatiles like BTEX were mainly removed by air floatation, while saturated hydrocarbons such as TPH were retained by the hydrophobic membrane. The MD long-term stability without any in-place cleaning was evaluated, and the membrane withstood for twenty two days without wetting, suggesting that optimizing oxidation pretreatment is critical for mitigating the fouling in MD. Results suggest that organic fouling in PW could be effectively reduced by the pretreatment, but further treatment is required to mitigate the scaling, which resulted in MD wetting.
Reactively Deposited Aluminum Oxide and Fluoropolymer Filled Aluminum Oxide Protective Coatings for Polymers
Reactive ion beam sputter deposition of aluminum simultaneous with low energy arrival of oxygen ions at the deposition surface enables the formation of highly transparent aluminum oxide films. Thick (12 200 A), adherent, low stress, reactively deposited aluminum oxide films were found to provide some abrasion resistance to polycarbonate substrates. The reactively deposited aluminum oxide films are also slightly more hydrophobic and more transmitting in the UV than aluminum oxide deposited from an aluminum oxide target. Simultaneous reactive sputter deposition of aluminum along with polytetrafluoroethylene (PTFE Teflon) produces fluoropolymer-filled aluminum oxide films which are lower in stress, about the same in transmittance, but more wetting than reactively deposited aluminum oxide films. Deposition properties, processes and potential applications for these coatings will be discussed.
Cyclic oxidation behavior of selected commercial NiCr-alloys for engine exhaust valves in wet air environment between 800 and 950 °C
In this work, the impact of water vapor on the cyclic oxidation behavior of four commercial Ni-based superalloys (N80A, N90, R41 and H282) was investigated between 800 and 950°C. Oxidation- and volatilization-induced Cr loss accelerated the transition from protective and adherent oxide formation (Cr 2 O 3 ) to mixed oxides that significantly spalled at 950°C for H282 and R41. The accelerated oxidation, Cr depletion, and spallation susceptibility for R41 and to a lesser extent for H282 compared to N80A and N90 was related to the higher fraction of γ’, which led to increased Ti incorporation into the Cr 2 O 3 scale in the presence of water vapor.
Tuning Catalytic Reactivity via Wetting Control through Oxygen Vacancies: Ru Clusters on Anatase TiO 2 and CeO 2 Supports
The shape of supported metal particles regulates their catalytic reactivity and is determined by the degree of wetting between the metal particle and the support surface. Flattened particles that wet support surfaces were reported in various catalytic systems, particularly in the subnanometer size regime. Such consequential metal–support wetting phenomena are poorly understood, and methods to study them on powder catalysts under realistic conditions are lacking. Here, we investigate the size-dependent wetting behaviors of Ru particles on two reducible-oxide supports, anatase TiO 2 (TiO 2 -A) and CeO 2 , under reducing catalytic conditions. X-ray absorption spectroscopy (XAS), low-energy ion scattering (LEIS), and density functional theory (DFT) are combined to determine the shape of Ru particles. Ru particles remain three-dimensional without wetting the TiO 2 -A support within the coverage range studied (0.06–0.98 Ru nm –2 ). In contrast, at low coverages (<0.25 Ru nm –2 ), Ru wets the CeO 2 support to form flat, disordered structures. The higher wettability of CeO 2 than TiO 2 -A is attributed to oxygen vacancies in the near-surface region. The shape difference between small Ru particles or clusters on the two supports leads to drastically contrasting catalytic reactivities in polyolefin hydrogenolysis, despite similar diameters. As a result, this work highlights the implications of metal–support wetting, or cluster shape, on catalytic behaviors of small metal clusters, while establishing the foundation for future systematic studies of such a phenomenon in realistic systems, by delivering a multitechnique methodology and revealing governing fundamental principles.
A Closer Look at Fe(II) Passivation of Goethite
Our understanding of how Fe(II) reacts with Fe(III) oxides has evolved significantly based on evidence for electron transfer at the oxide-water interface and Fe(II)-catalyzed recrystallization. Recent experiments, as well as computational calculations, further suggest that defects at oxide surfaces can facilitate electron transfer. There is, however, some evidence that these processes cease after continued contact with Fe(II). Here, we explore the sustainability of these processes over longer time frames by measuring whether exposure to Fe(II) inhibits Fe(II)-goethite electron transfer, and whether this inhibition is reversible. To quantify the extent of electron transfer, we used selective isotope labeling with 57Fe Mössbauer spectroscopy. The results revealed that pre-reacting goethite with Fe(II) decreases the extent of electron transfer during subsequent exposures, and that less electron transfer occurs with increasing reaction time. Similarly, X-ray absorption spectroscopy and magnetic circular dichroism suggest that reaction with Fe(II) consumes surface defects and forms a passivation layer, making goethite less susceptible to electron transfer. When Fe(II) is removed by either wet chemical extraction or oxidation, electron transfer is mostly restored, suggesting that inhibition of electron transfer is reversible. Our results show that in environmental systems, which are commonly subjected to transient geochemical fluctuations, electron transfer between Fe(II) and Fe oxides, and processes linked to it, are likely to be relevant beyond just short time scales.
The effect of Tricresyl-Phosphate (TCP) as an additive on wear of Iron (Fe)
The effect of tricresyl phosphate (TCP) as an antiwear additive in lubricant trimethyol propane triheptanoate (TMPTH) was investigated. The objective was to examine step loading wear by use of surface analysis, wetting, and chemical bonding changes in the lubricant. The investigation consisted of steploading wear studies by a pin or disk tribometer, the effects on wear related to wetting by contact angle and surface tension measurements of various liquid systems, the chemical bonding changes between lubricant and TCP chromatographic analysis, and by determining the reaction between the TCP and metal surfaces through wear scar analysis by Auger emission spectroscopy (AES). The steploading curve for the base fluid alone shows rapid increase of wear rate with load. The steploading curve for the base fluid in presence of 4.25 percent by volume TCP under dry air purge has shown a great reduction of wear rate with all loads studied. It has also been found that the addition of 4.25 percent by volume TCP plus 0.33 percent by volume water to the base lubricant under N2 purge also greatly reduces the wear rate with all loads studied. AES surface analysis reveals a phosphate type wear resistant film, which greatly increases load-bearing capacity, formed on the iron disk. Preliminary chromatographic studies suggest that this film forms either because of ester oxidation or TCP degradation. Wetting studies show direct correlation between the spreading coefficient and the wear rate.
Surface Energy Modulated Self‐Assembly of Percolative Gallium Nanodroplet Films for Stretchable Electronics
Advancements in soft robotics and wearable technologies have led to an increased need for flexible and stretchable electronic systems. Liquid metals like Gallium (Ga) and its alloys offer high potential in the field of stretchable electronics and photonics due to their inherent high conductivity and malleability. However, their high surface tension and native oxide formation hinder uniform wetting and continuous film formation to get conducting films. Here, we report a fabrication strategy to realize electrically conductive Ga thin films with effective thicknesses around 100 nm on polymeric and elastomeric substrates. By enhancing the surface energy of the elastomer, we create uniform Ga nanodroplets capable of sustaining stretchability up to 200% strain. Our devices exhibit electronic conduction primarily through tunneling and display strain tunable piezoresistive characteristics, which are explained using Kirchhoff's resistive network and Simmon's analytical tunneling current model. To showcase the device's capability in fields of stretchable electronics, we demonstrate several functional prototypes, including flexible devices integrated with Light Emitting Diodes (LEDs), curvature and pressure sensors, and soft robotic grippers capable of sensing object curvature. The demonstrated devices highlight the potential of this approach for scalable integration of stretchable electronics in soft robotic and wearable platforms.
No effect of sex steroids on compensatory muscle hypertrophy
The effects of orchiectomy and/or subcutaneously implanted testosterone propionate (TP) on the hypertrophic response of rat plantaris muscles to functional overload (induced by bilateral removal of gastrocnemius and soleus muscles) are investigated experimentally. Muscle wet weight, metabolic substrate oxidation, and cytosolic androgen-receptor binding are measured, and the results are presented in tables. Eight weeks after surgery, the plantaris muscle weight as a percentage of body weight is found to be about twice that in rats without muscle overload, regardless of the sex-hormone status. Overloading causes decreased ability to oxidize glucose and pyruvate, decreased succinate dehydrogenase specific activity, and no change in the ability to oxidize beta-hydroxybutyrate or in androgen-receptor binding. The oxidative response is unaffected by orchiectomy or TP or both. It is argued that the actions of sex hormones and functional overload are not synergistic.
Method for removal of nitrogen oxides from stationary combustion sources
A method for removing NO.sub.X from gas streams emanating from stationary combustion sources and manufacturing plants utilizes the injection of hydrogen peroxide into the gas stream for rapid gas-phase oxidation of NO to NO.sub.2 and water-soluble nitrogen acids HNO.sub.2 and HNO.sub.3. The nitrogen acids may be removed from the oxidized gas stream by wet scrubbing or by contact with a particulate alkaline material to form a nitrite/nitrate salt.
Thermal oxidation of 3C silicon carbide single-crystal layers on silicon
Thermal oxidation of thick single-crystal 3C SiC layers on silicon substrates was studied. The oxidations were conducted in a wet O2 atmosphere at temperatures from 1000 to 1250 C for times from 0.1 to 50 h. Ellipsometry was used to determine the thickness and index of refraction of the oxide films. Auger analysis showed them to be homogeneous with near stoichiometric composition. The oxide growth followed a linear parabolic relationship with time. Activation energy of the parabolic rate constant was found to be 50 kcal/mole, while the linear rate constant was 74 kcal/mole. The latter value corresponds approximately to the energy required to break a Si-C bond. Electrical measurements show an effective density of 4-6 x 10 to the 11th per sq cm for fixed oxide charges at the oxide-carbide interface, and the dielectric strength of the oxide film is aproximately 6 x 10 to the 6th V/cm.