Search NASA⌕ Search

SEARCH · Search NASA

Results for “wrapping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Specification of EBR-II Contact Profilometry Data

All contact profilometry data stored in FIPD was originally measured using the HFEF vertical contact profilometer, which was an electronic gauge to measure the diameter profile of an element or capsule continuously over the region of interest. The element could be rotated as it passed through the probes if the wire wrap was not to be removed and the element could be returned to reactor for further irradiation. If the wire wrap was removed, the element could be drawn vertically through the probes, rotated, and the process repeated. In this way any cladding ovality could be observed. Figure 1 shows the setup used to measure the fuel pin diameter profile. The ambient temperature during the measurement was ~21-23 ºC. The cladding temperature during the measurement is considered to be similar to the ambient temperature by assuming the fuel decay heat did not impact the cladding temperature. Two documents contain most of the important details about contact profilometry measurements. The first one is the operational manual of the contact profilometer (title: Element contact profilometer operation and maintenance, HFEF/N OMM 4326, DOC. NO. W0202-0007-SA-01). This manual provides: (1) description of the contact profilometer including the functions of each component (support stage, sensing head, control system, and calibration standards, etc.); (2) step-by-step guidance on calibrations, operations, and measurements; and (3) maintenance procedures and other details of the contact profilometer. The second document is a publicly accessible report entitled “A Fuel-element Profilometer for the HFEF.” This report describes the development of the contact profilometer, including the design requirements, features, and details of each component, as well as the acceptance tests for the built system. This document is important because it reports the uncertainties of the measurements with detailed deduction procedures. The reported uncertainties should apply to all hard-copy contact profilometry data in FIPD. Some key information about contact profilometry measurements was extracted from these two documents. Combining the information with other sources, a specification for interpretating the contact profilometry data in FIPD was established.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Inexpensive Superinsulation for Cryogenic and Highly Insulating Applications (CRADA Final Report)

This effort will use our novel insulation formed into effective “solid” (as compared to powder) insulating panels and/or wraps to demonstrate important technical achievements including scaling appropriate crosslinking to directly and cost effectively address vacuum insulated panel (VIP) applications and cryogenic component wrapping to help reduce energy use. This project will improve and scale-up processes (from 3” diameter disks) to make larger samples (e.g., 12” x 12” x 1”) Wow, cfor external evaluation and testing.

36 MATERIALS SCIENCE↗
DOE OSTI2020

In-Field Performance of Biomass Balers

Herbaceous biomass will contribute significantly to meeting renewable energy goals. Harvesting equipment for hay is generally suitable for mowing, raking, and baling grasses such as switchgrass; however, there is a need for field data to better understand machine performance in energy crops. The purpose of this study was to collect field data to estimate baler field capacity, throughput, and speed. Data gathered with a Differential Global Positioning System (DGPS) unit during baling provided time-motion studies of baler productivity. Six fields were used to compare field capacity, speed, and throughput results from four round balers and one large-square baler. The results show that in-field performance of round balers is significantly affected by yield, but that the relationship can be represented with machinery management concepts, knowledge of maximum throughput, and wrap-eject time. Baler performance will be overestimated if the yield, maximum throughput, and wrap-eject time are not correctly accounted for.

Grisso, Robert “Bobby” (ORCID:0000000267893558)↗
DOE OSTI2024

Measuring the Electronic Bandgap of Carbon Nanotube Networks in Non-Ideal p-n Diodes

The measurement of the electronic bandgap and exciton binding energy in quasi-one-dimensional materials such as carbon nanotubes is challenging due to many-body effects and strong electron–electron interactions. Unlike bulk semiconductors, where the electronic bandgap is well known, the optical resonance in low-dimensional semiconductors is dominated by excitons, making their electronic bandgap more difficult to measure. In this work, we measure the electronic bandgap of networks of polymer-wrapped semiconducting single-walled carbon nanotubes (s-SWCNTs) using non-ideal p-n diodes. We show that our s-SWCNT networks have a short minority carrier lifetime due to the presence of interface trap states, making the diodes non-ideal. We use the generation and recombination leakage currents from these non-ideal diodes to measure the electronic bandgap and excitonic levels of different polymer-wrapped s-SWCNTs with varying diameters: arc discharge (~1.55 nm), (7,5) (0.83 nm), and (6,5) (0.76 nm). Our values are consistent with theoretical predictions, providing insight into the fundamental properties of networks of s-SWCNTs. The techniques outlined here demonstrate a robust strategy that can be applied to measuring the electronic bandgaps and exciton binding energies of a broad variety of nanoscale and quantum-confined semiconductors, including the most modern nanoscale transistors that rely on nanowire geometries.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Synthetic Streamflow Datasets to Support Emulation of Water Allocations via LSTM

This archive is the data companion to the bonney_et-al_2026_erc metarepo which generates synthetic data, trains an LSTM model, and generates performance metrics on the trained model. While the generation of the synthetic data is fully reprodicible, it is a computationally expensive process. This data archive contains the synthetic datasets needed for training and testing an LSTM model and reproduction of figures and tables. In addition, supplemenatary data products generating and visualizing results is also included, such as geospatial data for the basin. Contents There are two high level directories: `WRAP_archive/` and `repo_data/`. The `WRAP_archive` directory contains compressed intermediate dataproducts from the dataset generation workflow (marked as "I_Dataset_Generation" in the metarepo). These data products are not required by any scripts in the metarepo, but they are archived as they are expensive to generate and may have useful information for other analyses. The `repo_data` directory contains the necessary data for reproducing the workflow in the metarepo and should be decompressed and moved into the top level of the metarepo. Additional details are provided in README.md.

drought↗
DOE OSTI2024

Energy Analysis of Combi Heat Pump System Configurations for Space Conditioning and Domestic Hot Water Heating in Residential Buildings

Combi heat pump systems, also referred to multifunctional variable refrigerant flow heat recovery (MF-VRFHR) systems, are specifically designed for residential applications to manage both space conditioning and domestic hot water (DHW). They have attracted attention due to their potential for energy conservation through heat recovery. The incorporation of a hot water tank introduces various system configurations, each characterized by distinct pros and cons related to energy efficiency, system stability, and maintenance. Despite this, a critical gap exists as the specific energy performance remains unquantified under diverse operational modes (e.g., heating mode and heat recovery mode). This paper aims to bridge this gap by conducting a comprehensive comparative analysis of two prevalent system configurations while considering feasible proposed control logics. Configuration 1 integrates a separate hot water tank and a refrigerant-to-water heat exchanger (HEX), also known as a Hydro Kit while Configuration 2 incorporates a refrigerant-wrapped hot water tank. To facilitate this analysis, we developed high-fidelity system models for both configurations in Modelica, capturing system dynamics and detailed control sequences effectively. These system models were built upon the TIL library for HVAC equipment components and the Buildings library for residential building thermal load calculations. The validation of the simulation testbed utilized data from experiments conducted in the PNNL lab home for Configuration 1. To establish the simulation testbed for Configuration 2, we extended the modeling setup derived from Configuration 1. This extension specifically involved substituting the separate hot water tank and Hydro Kit with a refrigerant-wrapped hot water tank of similar sizing sourced from an actual product. The simulation analysis of heating-only and heat recovery modes reveals that Configuration 2 not only saves energy and maintains warmer tank temperatures but also demonstrates faster water heating capabilities. This is attributed to decreased energy loss and improved heat transfer. The study encompasses a wide range of scenarios, considering diverse thermal loads and water usage patterns across heating and heat recovery modes. Overall, the comprehensive results indicate that Configuration 2 achieves energy savings ranging from 3.5% to 12.2% compared to Configuration 1, depending on factors such as water usage patterns, thermal loads, and operational modes.

Configuration, Comparison, Multi-functional, Resid↗
DOE OSTI2020

Membranes for fluid separation

Membranes, methods of making the membranes, and methods of using the membranes are described herein. The membranes can comprise a gas permeable support and a continuous phase comprising a selective inorganic material disposed within the gas permeable support. In some embodiments, the membranes can exhibit a CO2:N2 selectivity of at least 10 at 24° C. The membranes can be bendable, such that when the membranes are wrapped around a 1.5-inch diameter cylinder and returned to a planar conformation, the CO2:N2 selectivity of the membranes is at least 25% of the CO2:N2 selectivity of the membranes prior to having been wrapped around the cylinder.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Coffea -- Columnar Object Framework For Effective Analysis

The coffea framework provides a new approach to High-Energy Physics analysis, via columnar operations, that improves time-to-insight, scalability, portability, and reproducibility of analysis. It is implemented with the Python programming language, the scientific python package ecosystem, and commodity big data technologies. To achieve this suite of improvements across many use cases, coffea takes a factorized approach, separating the analysis implementation and data delivery scheme. All analysis operations are implemented using the NumPy or awkward-array packages which are wrapped to yield user code whose purpose is quickly intuited. Various data delivery schemes are wrapped into a common front-end which accepts user inputs and code, and returns user defined outputs. We will discuss our experience in implementing analysis of CMS data using the coffea framework along with a discussion of the user experience and future directions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Seizure detection device

Example aspects of a collector for a seizure detection device, a seizure detection device, and a method of detecting a seizure are disclosed. The collector for a seizure detection device can comprise a collector material configured to collect volatile organic compounds given off from a patient's skin; a wrapping configured to isolate the collector material from an external environment; a heater comprising a heating element, the heating element configured to emit a thermal pulse to desorb the volatile organic compounds from the collector material; and a mesh layer configured to prevent the collector material from contacting the patient's skin, wherein the collector material is received between the wrapping and the mesh layer.

Arnold, Gary Stephen↗
DOE OSTI2021

Ceramic matrix composite turbine nozzle shell and method of assembly

A ceramic matrix composite turbine nozzle includes a primary outer nozzle platform; a primary inner nozzle platform; and an airfoil-shaped body extending between the primary inner and primary outer nozzle platforms. The body includes core plies defining a cavity; composite wrap plies circumscribing the core plies and defining an airfoil shape; a secondary outer nozzle platform in contact with the primary outer nozzle platform; and a secondary inner nozzle platform in contact with the primary inner nozzle platform. Each composite wrap ply has two layers of unidirectional fibers oriented transverse to each other and has first and second longitudinal edges. The first and second longitudinal edges are cut into fingers, which are folded in a transverse direction away from a turbine nozzle longitudinal axis and are interleaved between platform plies to define the secondary inner nozzle platform and the secondary outer nozzle platform.

de Diego, Peter↗
DOE OSTI2021

Vacuum manufacture of cryogenic pressure vessels for hydrogen storage

In one aspect the present disclosure relates to a method of manufacturing a cryogenic pressure vessel. The method may include providing a metal lined, composite wrapped vessel which has a boss. The method may further include securing an inlet to the boss, and then encapsulating the metal lined, composite wrapped vessel within a metallic layer in a vacuum controlled environment to form an encapsulated inner tank subassembly. The method may further include securing at least one support to an exterior of the encapsulated inner tank subassembly, and within the controlled vacuum environment, applying a metal coating over the encapsulated inner tank subassembly and the at least one support to form a metal coated, encapsulated inner tank subassembly. The method may further include, within the controlled vacuum environment, encapsulating the metal coated, encapsulated inner tank subassembly within a metallic vacuum jacket, which forms the cryogenic pressure vessel.

Aceves, Salvador M.↗
DOE OSTI2022

Volatile organic compound detection device

A volatile organic compound collector can include a collector material configured to collect volatile organic compounds given off from a patient's skin; a wrapping configured to isolate the collector material from an external environment; a heater comprising a heating element, the heating element configured to emit a thermal pulse to desorb the volatile organic compounds from the collector material; and a mesh layer configured to prevent the collector material from contacting the patient's skin, wherein the collector material is received between the wrapping and the mesh layer.

Arnold, Gary Stephen↗
DOE OSTI2022

ECAR-6330 Rev 0 Computational Fluid Dynamics Evaluation of Core Pressure Drop for the Primary Coolant Apparatus Test

PCAT is a thermal-hydraulic test loop for MARVEL reactor. The design gap thickness between the heater rods of PCAT core is 1.0 mm. The heater elements were manufactured within a straightness tolerance for the designed gap thickness, but several elements have been distorted out of tolerance during the welding process. The distortion of heater rods could lead to flow maldistribution and excessive hotspot temperature when the gap between two heater rods is too narrow. Wire-wraps are the spacer devices widely used in the sodium cooled fast reactor system to maintain the design fuel pitch. Generally, a wire spacer can enhance the turbulent heat transfer, but it increases the pressure drop, which is not desirable for a natural-circulation system like PCAT. Therefore, three short wire-wrap spacers per heater have been proposed to contain the core pressure drops and keep the heater-to-heater gap in an acceptable range. The objectives of this ECAR is to evaluate the PCAR core pressure drop with short wire spacers to confirm that the additional pressure drop due to the wire spacer will not disturb the natural circulation of the PCAT.

21 - SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLAN↗
DOE OSTI2020

Unraveling the Crystallization Kinetics of 2D Perovskites with Sandwich-Type Structure for High-Performance Photovoltaics

2D perovskite solar cells with high stability and high efficiency have attracted significant attention. A systematical static and dynamic structure investigation is carried out to show the details of 2D morphology evolution. A dual additive approach is used, where the synergy between an alkali metal cation and a polar solvent leads to high-quality 2D perovskite films with sandwich-type structures and vertical phase segregation. Such novel structure can induce high-quality 2D slab growth and reduce internal and surface defects, resulting in a high device efficiency of 16.48% with enhanced continuous illumination stability and improved moisture (55-60%) and thermal (85°C) tolerances. Transient absorption spectra reveal the carrier migration from low n to high n species with different kinetics. An [PbI 6 ] 4- octagon coalescence transformation mechanism coupled with metal and organic cations wrapped is proposed. By solvent vapor annealing, a recrystallization and reorientation of the 2D perovskite slabs occurs to form an ideal structure with improved device performance and stability.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Over-Potential Tailored Thin and Dense Lithium Carbonate Growth in Solid Electrolyte Interphase for Advanced Lithium Ion Batteries

A stable solid electrolyte interphase (SEI) is highly desired to prevent parasitic reactions during normal operation of lithium-ion batteries (LIBs). Lithium carbonate (Li 2 CO 3 ) is one of the most significant components for smooth SEI passivation layers; while the formation mechanism and special distribution of the Li 2 CO 3 layer has not yet been illustrated. In this study, an over-potential tailored Li 2 CO 3 growth mechanism based on the typical hard carbon anode is demonstrated. With an increase in the over-potential, the size of Li 2 CO 3 decreases gradually as the amount increases. When the over-potential is large (potential at 0.01 V), a Li 2 CO 3 -rich thin and dense inorganic layer with the average thickness of 4.4 nm in the SEI is constructed. The special SEI the completely wraps the boundaries of the anode enables a larger Li-ion de-solvation energy barrier and a lower Li-ion diffusion energy barrier, which supports low self-discharge behavior and a fast kinetic rate at the anode. More generally, this Li 2 CO 3 growth mechanism is also applicable to commercialized graphite anodes and similar results are also obtained. Therefore, this work provides a new insight into the Li 2 CO 3 growth mechanism in SEIs, as well as a guideline for the design of stable artificial SEIs.

25 ENERGY STORAGE↗
DOE OSTI2026

Toward Fully Soft and Multifunctional Shape Sensing via Optical Waveguide Arrays

For soft bodies, surface deformation and pressure provide proprioceptive and exteroceptive information, including body configuration, body compliance, and external forces. We develop a sheet sensor with a fully soft sensing surface that provides surface shape reconstruction using optical waveguide arrays. The waveguides are fabricated to achieve a tunable linear response to bi‐directional bending curvature, and the waveguide arrays are configured to differentiate between ambiguous shapes. We characterize the waveguide performance, relating curvature sensitivity to the core's surface roughness. Synergy of waveguide responses reduces the number of sensing elements required and achieves damage resilience. Using waveguide sensitivity to pressure, we also demonstrate feasibility for exteroception. We demonstrate the multifunctional sensing capability by wrapping the sheet around an upper arm, showcasing joint motion and external force sensing. Integrated into or applied onto surfaces of robotic or living systems, this design can be implemented in applications such as virtual reality, teleoperation, physical therapy, and soft robotics.

Yu, Qifan [Department of Mechanical Engineering Ma↗
DOE OSTI2023

3D Carbon Coating Enabled High‐capacity and Stable Micro‐sized Silicon Suboxide‐graphite Blended Anodes for Practical Lithium‐ion Batteries

Abstract Silicon oxide (SiO x ) is a promising anode candidate of lithium‐ion batteries (LIBs) owing to its extremely high specific capacity. However, the low initial Coulombic efficiency (ICE) and rapid capacity degradation of SiO x , triggered by the enormous volume variation upon repeated (de)lithiation, gravely hinder its practical use. Herein, two mass‐produced micro‐sized SiO x @C composites with obviously different morphologies for commercial LIBs are reported. Particularly, the SiO x ‐graphite blended anode (SiO x @3D‐G‐Gr) based on SiO x wrapped by three‐dimensional (3D) carbon layers (SiO x @3D‐G) exhibits a capacity of 519 mAh g −1 , an ICE of 90.0 % and a capacity retention of 83.4 % at 0.2 C over 100 cycles. which is far exceeding its counterpart SiO x @C‐H‐Gr (65.7 %). The obtained impressive properties of SiO x @3D‐G originate from the critical contribution of 3D carbon layers, which serves as the effective stress buffer and protective layer as well as the strong networks for electron/Li + transport. Accordingly, the full‐cell based on SiO x @3D‐G‐Gr anode and commercial LiCoO 2 cathode delivers a capacity of 803 mAh and an excellent capacity retention of 95.6 % (616 mAh, 96.6 % for graphite, respectively) at 1 C over 100 cycles with a stabilized CE of nearly 100 %. The micro‐sized SiO x @3D‐G showing a promising prospect in the commercial‐grade anodes in LIBs.

Electrochemistry↗
DOE OSTI2020

Polyhydrido Copper Nanoclusters with a Hollow Icosahedral Core: [Cu 30 H 18 {E 2 P(OR) 2 } 12 ] (E=S or Se; R= n Pr, i Pr or i Bu)

Although atomically precise polyhydrido copper nanoclusters are of prime interest for a variety of applications, they have so far remained scarce. Here, we describe the synthesis of a dithiophosphate-protected copper(I) hydride-rich nanocluster (NC), [Cu 30 H 18 {S 2 P(O n Pr) 2 } 12 ] ( 1 H ), fully characterized by various spectroscopic methods and single-crystal X-ray diffraction. The X-ray structure of 1 H reveals an unprecedented central Cu 12 hollow icosahedron. Six faces of this icosahedron are capped by Cu 3 triangles, the whole Cu 30 core being wrapped by twelve dithiophosphate ligands and the whole cluster has ideal S 6 symmetry. The locations of the 18 hydrides in 1 H were ascertained by a single-crystal neutron diffraction study. They are composed of three types: capping μ 3 -H, interstitial μ 4 -H (seesaw) and μ 5 -H ligands (square pyramidal), in good agreement with the DFT simulations. The numbers of hydrides and ligand resonances in the 1 H NMR spectrum of 1 H are in line with their coordination environment in the solid state, retaining the S 6 symmetry in solution. Furthermore, two new Se-protected polyhydrido copper nanoclusters, [Cu 30 H 18 {Se 2 P(OR) 2 } 12 ] ( 2 H : R= i Pr 3 H : R= i Bu) were synthesized from their sulfur relative 1 H via ligand displacement reaction and their X-ray structures feature the exceptional case where both the NC shape and size are fully conserved during the course of ligand exchange. DFT and TD-DFT calculations allow understanding the bonding and optical properties of clusters 1 H – 3 H . In addition, the reaction of 1 H with [Pd(PPh 3 ) 2 Cl 2 ] in the presence of terminal alkynes led to the formation of new bimetallic Cu–Pd alloy clusters [PdCu 14 H 2 {S 2 P(O n Pr) 2 } 6 (C≡CR) 6 ] ( 4 : R=Ph; 5 : R = C 6 H 4 F).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗