Search NASA⌕ Search

SEARCH · Search NASA

Results for “ANALOG PROCESSING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Evaluation of Background Concentrations of Contaminants in an Unusual Desert Arroyo Near a Uranium Mill Tailings Disposal Cell - 12260

The U.S. Department of Energy (DOE) Office of Legacy Management (LM) manages 27 sites that have groundwater containing uranium concentrations above background levels. The distal portions of the plumes merge into background groundwater that can have 50 μg/L or more uranium. Distinguishing background from site-related uranium is often problematic, but it is critical to determining if remediation is warranted, establishing appropriate remediation goals, and evaluating disposal cell performance. In particular, groundwater at disposal cells located on the upper Cretaceous Mancos Shale may have relatively high background concentrations of uranium. Elevated concentrations of nitrate, selenium, and sulfate accompany the uranium. LM used geologic analogs and uranium isotopic signatures to distinguish background groundwater from groundwater contaminated by a former uranium processing site. The same suite of contaminants is present in groundwater near former uranium processing sites and in groundwater seeps emanating from the Mancos Shale over a broad area. The concentrations of these contaminants in Many Devils Wash, located near LM's Shiprock disposal cell, are similar to those in samples collected from many Mancos seeps, including two analog sites that are 8 to 11 km from the disposal cell. Samples collected from Many Devils Wash and the analog sites have high AR values (about 2.0)-in contrast, groundwater samples collected near the tailings disposal cell have AR values near 1.0. These chemical signatures raise questions about the origin of the contamination seeping into Many Devils Wash. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Thomson Scattering Diagnostic Data Acquisition Systems for Modern Fusion Systems

Uniquely designed complex data acquisition system for Thomson scattering diagnostic was developed. It allows recording short duration (3-5 ns) scattered pulses with 2 GHz sampling rate and 10-bit total resolution in oscilloscope mode. The system consists up to 48 photo detector modules with 0- 200 MHz bandwidth, 1-48 simultaneously sampling ADC modules and synchronization subsystem. The photo detector modules are based on avalanche photodiodes (APD) and ultra-low noise trans-impedance amplifiers. ADC modules include fast analog to digital converters and digital units based on the FPGA (Field- Programmable Gate Array) for data processing and storage. The synchronization subsystem is used to form triggering pulses and to organize the simultaneously mode of ADC modules operation. (authors)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Power Actuation and Switching Module Development

The Deep Space Avionics (DSA) Project is developing a Power Actuation and Switching Module (PASM). This component enables a modular and scalable design approach for power switching applications, which can result in a wide variety of power switching architectures using this simple building block. The PASM is designed to provide most of the necessary power switching functions of spacecraft for various Deep Space missions including future missions to Mars, comets, Jupiter and its moons. It is fabricated using an A SIC process that is tolerant of high radiation. The development includes two application specific integrated circuits (ASICs) and support circuitry all packaged using High Density Interconnect (HDI) technology. It can be operated in series or parallel with other PASMs, It can be used as a high-side or low-side switch and it can drive thruster valves, pyrotechnic devices such as NASA standard initiators, bus shunt resistors, and regular spacecraft component loads. Each PASM contains two independent switches with internal current limiting and over-current trip-off functions to protect the power subsystem from load faults. During turnon and turnoff each switch can limit the rate of current change (di/dt) to a value determined by the user. Threeway majority-voted On/Off commandability and full switch status telemetry (both analog and digital) are built into the module. This paper describes the development process used to design, model, fabricate, and test these compact and versatile power switches. Preliminary test results from prototype HDI PASM hardware are also discussed.

Power Actuation and Switching Module (PASM)↗

Protection Strategies Enable Selective Conversion of Biomass

Abstract Selective and economic conversion of lignocellulosic biomass components to bio‐based fuels and chemicals is the major goal of biorefineries, but low yields and selectivity for fuel precursors such as sugars, furanics, and lignin‐derived monomers pose significant disadvantages in process economics. In this Minireview we summarize the existing protection strategies used in biomass chemocatalytic conversion processes and focus the discussions on the mechanisms, challenges, and opportunities of each strategy. We introduce a concept of using analogous methods to manipulate biomass catalytic conversion pathways during the upgrading of carbohydrates to fuels and chemicals. This Minireview may provide new insights into the development of selective biorefining processes from a different perspective, expanding the options for selective conversion of biomass to fuels and chemicals.

Luo, Xiaolin↗

Protection Strategies Enable Selective Conversion of Biomass

Abstract Selective and economic conversion of lignocellulosic biomass components to bio‐based fuels and chemicals is the major goal of biorefineries, but low yields and selectivity for fuel precursors such as sugars, furanics, and lignin‐derived monomers pose significant disadvantages in process economics. In this Minireview we summarize the existing protection strategies used in biomass chemocatalytic conversion processes and focus the discussions on the mechanisms, challenges, and opportunities of each strategy. We introduce a concept of using analogous methods to manipulate biomass catalytic conversion pathways during the upgrading of carbohydrates to fuels and chemicals. This Minireview may provide new insights into the development of selective biorefining processes from a different perspective, expanding the options for selective conversion of biomass to fuels and chemicals.

Luo, Xiaolin↗

Digital atomic scale fabrication an inverse Moore's Law – A path to atomically precise manufacturing

There is an exciting opportunity to start a second digital revolution that will supersede the first digital revolution in information technology (IT) as the primary driver of scientific, technological, and economic growth. This new revolution will be digital fabrication technology. Here, the digital IT revolution has been largely driven by digital algorithms such as error detection and correction and Moore's Law which has given us an exponential trend in product capabilities. However, the longstanding trend in improving manufacturing precision which has enabled Moore's Law simply cannot be continued much longer because we are running into the limits imposed by the quantized nature of matter. At this scale, matter can no longer be treated in an analogue fashion i.e. as an infinitely divisible medium, but must be treated as an integer number of discrete atomic distances, i.e. in a digital fashion. By embracing this digital nature of matter, we can conceive of a digital fabrication technology, where the digital processes are the making and breaking of chemical bonds, there is a digital address grid that is spatial in nature, and error detection and correction processes can be developed. This digital fabrication technology will have the similarly huge advantages over analog fabrication that digital IT has over analog IT. We remind the reader that effective digital technologies are not exclusively digital in their operation. Digital electronics is carried out by analog transistors that are embedded in circuitry designed to accept their output in a digital fashion. Digital fabrication technology is not synonymous with Atomically Precise Manufacturing (APM) but should lead to that important capability. Furthermore this digital fabrication technology will start a new exponential manufacturing trend that will replace Moore's law and will not be just for information processing and therefore will have an even larger impact than Moore's Law. Like any exponential trend Digital Fabrication will start slowly in a few niche markets, but the time for investing in the development of this new technology is now.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Low-Temperature Gold Deposition Improves CdTe Back Contacts

Improved back contacts can benefit CdTe photovoltaics (PV). In this work, Cd(Se,Te) PV absorbers are cooled during Au evaporation to thermally quench a chemical reaction occurring between gold and CdTe and the generation of a reaction product that lowers device efficiency. Reducing substrate temperature enhances PV power conversion efficiency via open-circuit voltage and fill factor increases. X-ray photoelectron spectroscopy (XPS) reveals that lower temperature also reduces chemical perturbations of the CdTe, potentially linking back contact formation to a CdTe degradation product that hinders PV performance. Comparing reaction enthalpy and substrate heating energy shows that back contact formation by sputtering elemental metals onto ZnTe may exhibit a degradation pathway analogous to that of CdTe/Au reported here. Degradation-diminishing contact formation processes are therefore of general interest for optoelectronic devices, and the reduced substrate temperature in this study is one example.

14 SOLAR ENERGY↗

Speleogenesis, geometry, and topology of caves: A quantitative study of 3D karst conduits

Karst systems are hierarchically spatially organized three-dimensional (3D) networks of conduits behaving as drains for groundwater flow. Recently, geostatistical approaches proposed to generate karst networks from data and parameters stemming from analogous observed karst features. Other studies have qualitatively highlighted relationships between speleogenetic processes and cave patterns. However, few studies have been performed to quantitatively define these relationships. This paper reports a quantitative study of cave geometries and topologies that takes the underlying speleogenetic processes into account. In order to study the spatial organization of caves, a 3D numerical database was built from 26 caves, corresponding to 621 km of cumulative cave passages representative of the variety of karst network patterns. The database includes 3D speleological surveys for which the speleogenetic context is known, allowing the polygenic karst networks to be divided into 48 monogenic cave samples and classified into four cave patterns: vadose branchwork (VB), water-table cave (WTC), looping cave (LC), and angular maze (AM). Eight morphometric cave descriptors were calculated, four geometrical parameters (width-height ratio, tortuosity, curvature, and vertical index) and four topological ones (degree of node connectivity, α and γ graph indices, and ramification index) respectively. The results were validated by statistical analyses (Kruskal-Wallis test and PCA). The VB patterns are clearly distinct from AM ones and from a third group including WTC and LC. A quantitative database of cave morphology characteristics is provided, depending on their speleogenetic processes. These characteristics can be used to constrain and/or validate 3D geostatistical simulations. This study shows how important it is to relate the geometry and connectivity of cave networks to recharge and flow processes. Conversely, the approach developed here provides proxies to estimate the evolution of the vadose zone to epiphreatic and phreatic zones in limestones from the quantitative analysis of existing cave patterns.

58 GEOSCIENCES↗

Utilization of MCNP ® 6 implicit-capture simulations for quantification of systematic uncertainties from experimental environments

In this study, the high statistical precision that can be achieved using modern data collection techniques implies that systematic uncertainties that were ignored or not considered for past experiments must now be explored. The folding of Monte Carlo simulations into experimental data analysis, which is becoming common practice, requires an estimate of the systematic uncertainty present in the experimental result from uncertainties in the library of cross sections used during the simulation, but this source of uncertainty is typically not quantified. Here we describe a method to estimate this systematic uncertainty by varying the cross sections used during simulation runtime. As opposed carrying out hundreds of sequential analog Monte Carlo simulations, this task was accomplished through a post-processing calculation of output from a single simulation that was run using the implicit-capture formalism available with MCNP ® 6.2 and the PTRAC output format.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Experimental observation of defect pair separation triggering phase transitions

First-order phase transitions typically exhibit a significant hysteresis resulting for instance in boiling retardation and supercooling. The hysteresis arises, because nucleation of the new phase is activated. The free-energy change is positive until the nucleus reaches a critical size beyond which further growth is downhill. In practice, the barrier is often circumvented by the presence of heterogeneous nucleation centres, e.g. at vessel walls or seed crystals. Recently, it has been proposed that the homogeneous melting of ice proceeds via separation of defect pairs with a substantially smaller barrier as compared to the mere aggregation of defects. Here we report the observation of an analogous mechanism catalysing a two-dimensional homogeneous phase transition. A similar process is believed to occur in spin systems. This suggests that separation of defect pairs is a common trigger for phase transitions. Partially circumventing the activation barrier it reduces the hysteresis and may promote fluctuations within a temperature range increasing with decreasing dimensionality.

36 MATERIALS SCIENCE↗

The JSNS 2 data acquisition system

The JSNS 2 (J-PARC Sterile Neutrino Search at J-PARC Spallation Neutron Source) experiment aims to search for neutrino oscillations over a 24 m short baseline at J-PARC. The JSNS 2 inner detector is filled with 17 tons of gadolinium(Gd)-loaded liquid scintillator (LS) with an additional 31 tons of unloaded LS in the intermediate γ-catcher and an optically separated outer veto volumes. A total of 120 10-inch photomultiplier tubes observe the scintillating optical photons and each analog waveform is stored with flash analog-to-digital converters. Here, we present details of the data acquisition, processing, and data quality monitoring system. We also present two different trigger logics which are developed for the beam and self-trigger.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Field-induced decay of the quantum vacuum: Visualizing pair production in a classical photonic system

The phenomenon of vacuum decay, that is, electron-positron pair production due to the instability of the quantum electrodynamics vacuum in an external field, is a remarkable prediction of Dirac theory whose experimental observation is still lacking. Here a classic wave optics analog of vacuum decay, based on light propagation in curved waveguide superlattices, is proposed. This photonic analog enables a simple and experimentally accessible visualization in space of the process of pair production as breakup of an initially negative-energy Gaussian wave packet, representing an electron in the Dirac sea, under the influence of an oscillating electric field.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Distinguishing indirect signatures of new physics at ILC with polarized beams: Z′ versus anomalous trilinear gauge couplings

We examine the sensitivity of the e {sup +} e {sup −} International Linear Collider (ILC) for probing the Z-Z′ mixing in W {sup ±}-pair production process and its capability of distinguishing observable effects of the Z′ from analogous ones due to competitor models with anomalous trilinear gauge couplings (AGC) that can lead to the same or similar new physics experimental signatures.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Are suspensory ligaments important for middle ear reconstruction?

As the resolution of 3D printing techniques improves, the possibility of individualized, 3-ossicle constructions adds a new dimension to middle ear prostheses. In order to optimize these designs, it is essential to understand how the ossicles and ligaments work together to transmit sound, and thus how ligaments should be replicated in a middle ear reconstruction. The middle ear ligaments are thought to play a significant role in maintaining the position of the ossicles and constraining axis of rotation. Paradoxically, investigations of the role of ligaments to date have shown very little impact on middle ear sound transmission. We explored the role of the two attachments in the gerbil middle ear analogous to human ligaments, the posterior incudal ligament and the anterior mallear process, severing both attachments and measuring change in hearing sensitivity. The impact of severing the attachments on the position of the ossicular chain was visualized using synchrotron microtomography imaging of the middle ear. In contrast to previous studies, a threshold change on the order of 20 dB across a wide range of frequencies was found when both ligaments were severed. Concomitantly, a shift in position of the ossicles was observed from the x-ray imaging and 3D renderings of the ossicular chain. These findings contrast with previous studies, demonstrating that these ligaments play a significant role in the transmission of sound through the middle ear. It appears that both mallear and incudal ligaments must be severed in order to impair sound transmission. The results of this study have significance for middle ear reconstructive surgery and the design of 3D-printed three-ossicle biocompatible prostheses.

3D printing↗

CrossSim Inference Manual v2.0

Neural networks are largely based on matrix computations. During forward inference, the most heavily used compute kernel is the matrix-vector multiplication (MVM): $W \vec{x} $. Inference is a first frontier for the deployment of next-generation hardware for neural network applications, as it is more readily deployed in edge devices, such as mobile devices or embedded processors with size, weight, and power constraints. Inference is also easier to implement in analog systems than training, which has more stringent device requirements. The main processing kernel used during inference is the MVM.

97 MATHEMATICS AND COMPUTING↗

Using computers to analyze continuous data.

Dynamic field measurements often involve large quantities of continuous data, which must be analyzed and interpreted to obtain meaningful information. The processing can often be accomplished by tape-recording the data in analog form, performing off-line digitalization, and using the result as an input to statistical programs on a digital computer. A time series analysis was used to obtain power spectral density (PSD) curves to identify dominant frequencies. Representative PSD plots were obtained for STOL aircraft during cruise. Vibrational energy was clearly concentrated below 0.1 Hz, and was much higher in the vertical than in the lateral direction.

Catherines, J. J.↗

Quantification of geologic lineaments by manual and machine processing techniques

A study was conducted to investigate the effect of operator variability and subjectivity in lineament mapping and to examine methods to minimize or eliminate these problems by use of several machine preprocessing methods. LANDSAT scenes from the Anadarko Basin of Oklahoma and the Colorado Plateau were analyzed as test cases. Four geologists mapped lineaments on an Anadarko Basin scene, using transparencies of MSS bands 4-7, and their results are compared statistically. The total number of fractures mapped by the operators and their average lengths varied considerably, although comparison of lineament directions revealed some consensus. A summary map (785 linears) produced by overlaying the maps generated by the four operators showed that only 0.4% were recognized by all four operators, 4.7% by three, 17.8% by two and 77% by one operator. Two methods of machine aided mapping were tested, both simulating directional filters. One consists of computer (digital) processing of CCTs using edge enhancement algorithms, the other employs a television (analog) scanning of an image transparency which superimposes the original image and one offset in the direction of the scan line.

Podwysocki, M. H.↗