Search NASA⌕ Search

SEARCH · Search NASA

Results for “Atomic Control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Attosecond transient-absorption dynamics of xenon core-excited states in a strong driving field

We introduce attosecond transient-absorption experiments on xenon 4 d -1 6 p core-level states resonantly driven by intense (1.6 ×10 14 W/cm 2 ) few-cycle near-infrared laser pulses. In this strongly driven regime, broad induced absorption features with half-cycle (1.3-fs) delay-dependent modulation are observed over the range of 58-65 eV, predicted as a signature of the breakdown of the rotating-wave approximation in strong-field driving of Autler-Townes splitting [A. N. Pfeiffer and S. R. Leone, Phys. Rev. A 85, 053422 (2012)PLRAAN1050-294710.1103/PhysRevA.85.053422]. Relevant atomic states are identified by a numerical model involving three electronic states, and the mechanism behind the broad induced absorption is discussed in the Floquet formalism. Our findings demonstrate that a near-infrared field well into the tunneling regime can still control the optical properties of an atomic system over a several-electron-volt spectral range and with attosecond precision.

74 ATOMIC AND MOLECULAR PHYSICS↗

How Substitutional Point Defects in Two-Dimensional WS 2 Induce Charge Localization, Spin–Orbit Splitting, and Strain

Control of impurity concentrations in semiconducting materials is essential to device technology. Because of their intrinsic confinement, the properties of two-dimensional semiconductors such as transition metal dichalcogenides (TMDs) are more sensitive to defects than traditional bulk materials. The technological adoption of TMDs is dependent on the mitigation of deleterious defects and guided incorporation of functional foreign atoms. The first step toward impurity control is the identification of defects and assessment of their electronic properties. Here, we present a comprehensive study of point defects in monolayer tungsten disulfide (WS 2 ) grown by chemical vapor deposition using scanning tunneling microscopy/spectroscopy, CO-tip noncontact atomic force microscopy, Kelvin probe force spectroscopy, density functional theory, and tight-binding calculations. We observe four different substitutional defects: chromium (Cr W ) and molybdenum (Mo W ) at a tungsten site, oxygen at sulfur sites in both top and bottom layers (O S top/bottom), and two negatively charged defects (CD type I and CD type II). Their electronic fingerprints unambiguously corroborate the defect assignment and reveal the presence or absence of in-gap defect states. Cr W forms three deep unoccupied defect states, two of which arise from spin-orbit splitting. The formation of such localized trap states for Cr W differs from the Mo W case and can be explained by their different d shell energetics and local strain, which we directly measured. Utilizing a tight-binding model the electronic spectra of the isolectronic substitutions O S and Cr W are mimicked in the limit of a zero hopping term and infinite on-site energy at a S and W site, respectively. The abundant CDs are negatively charged, which leads to a significant band bending around the defect and a local increase of the contact potential difference. In addition, CD-rich domains larger than 100 nm are observed, causing a work function increase of 1.1 V. While most defects are electronically isolated, we also observed hybrid states formed between CrW dimers. Finally, the important role of charge localization, spin-orbit coupling, and strain for the formation of deep defect states observed at substitutional defects in WS 2 as reported here will guide future efforts of targeted defect engineering and doping of TMDs.

2D materials↗

Improved Mechanical Performance Fracture Properties and Reliability of Radical-Cured Thermosets

The aim of this study was to alter polymerization chemistry to improve network homogeneity in free-radical crosslinked systems. It was hypothesized that a reduction in heterogeneity of the network would lead to improved mechanical performance. Experiments and simulations were carried out to investigate the connection between polymerization chemistry, network structure and mechanical properties. Experiments were conducted on two different monomer systems - the first is a single monomer system, urethane dimethacrylate (UDMA), and the second is a two-monomer system consisting of bisphenol A glycidyl dimethacrylate (BisGMA) and triethylene glycol dimethacrylate (TEGDMA) in a ratio of 70/30 BisGMA/TEGDMA by weight. The methacrylate systems were crosslinked using traditional radical polymeriza- tion (TRP) with azobisisobutyronitrile (AIBN) or benzoyl peroxide (BPO) as an initiator; TRP systems were used as the control. The monomers were also cross-linked using activator regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP) as a type of controlled radical polymerization (CRP). FTIR and DSC were used to monitor reac- tion kinetics of the systems. The networks were analyzed using NMR, DSC, X-ray diffraction (XRD), atomic force microscopy (AFM), and small angle X-ray scattering (SAXS). These techniques were employed in an attempt to quantify differences between the traditional and controlled radical polymerizations. While a quantitative methodology for characterizing net- work morphology was not established, SAXS and AFM have shown some promising initial results. Additionally, differences in mechanical behavior were observed between traditional and controlled radical polymerized thermosets in the BisGMA/TEGDMA system but not in the UDMA materials; this finding may be the result of network ductility variations between the two materials. Coarse-grained molecular dynamics simulations employing a novel model of the CRP reaction were carried out for the UDMA system, with parameters calibrated based on fully atomistic simulations of the UDMA monomer in the liquid state. Detailed metrics based on network graph theoretical approaches were implemented to quantify the bond network topology resulting from simulations. For a broad range of polymerization parameters, no discernible differences were seen between TRP and CRP UDMA simulations at equal conversions, although clear differences exist as a function of conversion. Both findings are consistent with experiments. Despite a number of shortcomings, these models have demonstrated the potential of molecular simulations for studying network topology in these systems.

36 MATERIALS SCIENCE↗

Optical Control of Non-Equilibrium Phonon Dynamics

The light-induced selective population of short-lived far-from-equilibrium vibration modes is a promising approach for controlling ultrafast and irreversible structural changes in functional nanomaterials. This requires a detailed understanding of the dynamics and evolution of these phonon modes and their coupling to the excited-state electronic structure. Here, we combine femtosecond mega-electronvolt electron diffraction experiments on a prototypical layered material, MoTe 2 , with non-adiabatic quantum molecular dynamics simulations and ab initio electronic structure calculations to show how non-radiative energy relaxation pathways for excited electrons can be tuned by controlling the optical excitation energy. We show how the dominant intravalley and intervalley scattering mechanisms for hot and band-edge electrons leads to markedly different transient phonon populations evident in electron diffraction patterns. This understanding of how tuning optical excitations affect phonon populations and atomic motion is critical for efficiently controlling light-induced structural transitions of optoelectronic devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A digital optical phase-locked loop for diode lasers based on field programmable gate array

We have designed and implemented a highly digital optical phase-locked loop (OPLL) for diode lasers in atom interferometry. The three parts of controlling circuit in this OPLL, including phase and frequency detector (PFD), loop filter and proportional integral derivative (PID) controller, are implemented in a single field programmable gate array chip. A structure type compatible with the model MAX9382/MCH12140 is chosen for PFD and pipeline and parallelism technology have been adapted in PID controller. Especially, high speed clock and twisted ring counter have been integrated in the most crucial part, the loop filter. This OPLL has the narrow beat note line width below 1 Hz, residual mean-square phase error of 0.14 rad{sup 2} and transition time of 100 {mu}s under 10 MHz frequency step. A main innovation of this design is the completely digitalization of the whole controlling circuit in OPLL for diode lasers.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Controlling the Ru Island Decoration on Ni Nanoparticles to Tune the Activity for 5-Hydroxylmethylfurfural (HMF) Oxidation

Controlling the island decoration on metal nanoparticle supports is a major opportunity for improving the catalytic activity and an attractive synthetic challenge. The structure of the decorating metal determines how it interacts with the metal support and how it effectively catalyzes the reactants and the intermediates. In this work, we demonstrate that a slow-growth method maximizes the formation of Ru islands on faceted, branched Ni nanoparticles, thereby controlling the number of Ru–Ni atomic interactions and improving the catalytic activity. The Ru islands on branched Ni nanoparticles with the highest loading of Ru (9%) exhibited the highest activity for the electro-oxidation of biomass-derived 5-hydroxymethylfurfural (HMF). In conclusion, these results demonstrate the ability to synthetically control the second metal decoration to tune metal–support interactions, thereby enhancing the catalytic activity.

5-hydroxymethylfurfural↗

Atomic-Scale Characterization of Dilute Dopants in Topological Insulators via STEM–EDS Using Registration and Cell Averaging Techniques

Magnetic dopants in three-dimensional topological insulators (TIs) offer a promising avenue for realizing the quantum anomalous Hall effect (QAHE) without the necessity for an external magnetic field. Understanding the relationship between site occupancy of magnetic dopant elements and their effect on macroscopic property is crucial for controlling the QAHE. By combining atomic-scale energy-dispersive X-ray spectroscopy (EDS) maps obtained by aberration-corrected scanning transmission electron microscopy (AC-STEM) and novel data processing methodologies, including semi-automatic lattice averaging and frame registration, we have determined the substitutional sites of Mn atoms within the 1.2% Mn-doped Sb 2 Te 3 crystal. More importantly, the methodology developed in this study extends beyond Mn-doped Sb 2 Te 3 to other quantum materials, traditional semiconductors, and even electron irradiation sensitive materials.

36 MATERIALS SCIENCE↗

Control of the probe absorption via incoherent pumping fields in asymmetric semiconductor quantum wells

In a three-level asymmetric semiconductor quantum well system, owing to the effects that result from the incoherent pumping fields, the probe absorption of probe field can be effectively controlled. The result is achieved by applying the two incoherent pumping fields, so it is different from the conventional way in ordinary laser-driven schemes that coherent driving fields are necessary to control the probe absorption. Otherwise, our study is much more practical than its atomic counterpart due to its flexible design and the controllable interference strength. Thus, it may provide some new possibilities for technological applications in optoelectronics and solid-state quantum information science.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Discovery of stationary operation of quiescent H-mode plasmas with net-zero neutral beam injection torque and high energy confinement on DIII-D

Recent experiments in DIII-D [J. L. Luxon et al., in Plasma Physics and Controlled Nuclear Fusion Research 1996 (International Atomic Energy Agency, Vienna, 1987), Vol. I, p. 159] have led to the discovery of a means of modifying edge turbulence to achieve stationary, high confinement operation without Edge Localized Mode (ELM) instabilities and with no net external torque input. Eliminating the ELM-induced heat bursts and controlling plasma stability at low rotation represent two of the great challenges for fusion energy. By exploiting edge turbulence in a novel manner, we achieved excellent tokamak performance, well above the H{sub 98y2} international tokamak energy confinement scaling (H{sub 98y2} = 1.25), thus meeting an additional confinement challenge that is usually difficult at low torque. The new regime is triggered in double null plasmas by ramping the injected torque to zero and then maintaining it there. This lowers E × B rotation shear in the plasma edge, allowing low-k, broadband, electromagnetic turbulence to increase. In the H-mode edge, a narrow transport barrier usually grows until MHD instability (a peeling ballooning mode) leads to the ELM heat burst. However, the increased turbulence reduces the pressure gradient, allowing the development of a broader and thus higher transport barrier. A 60% increase in pedestal pressure and 40% increase in energy confinement result. An increase in the E × B shearing rate inside of the edge pedestal is a key factor in the confinement increase. Strong double-null plasma shaping raises the threshold for the ELM instability, allowing the plasma to reach a transport-limited state near but below the explosive ELM stability boundary. The resulting plasmas have burning-plasma-relevant β{sub N} = 1.6–1.8 and run without the need for extra torque from 3D magnetic fields. To date, stationary conditions have been produced for 2 s or 12 energy confinement times, limited only by external hardware constraints. Stationary operation with improved pedestal conditions is highly significant for future burning plasma devices, since operation without ELMs at low rotation and good confinement is key for fusion energy production.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modulating ion-binding at macromolecular interfaces during (bio)mineralization: A snapshot review for calcium carbonate and calcium phosphate systems

Abstract Local environments have strict influence over (bio)mineralization in calcifying systems. This snapshot review discusses recent insights into the roles of Ca 2+ -macromolecule interactions on the nucleation of calcium carbonate and calcium phosphate minerals. Experimental findings combined with simulations/modeling are providing breakthrough information and raising important questions for future studies. The emerging picture is that both nucleation and growth are driven by local ordering of ions and water about the macromolecule interface, rather than broader properties or molecular class. Tuning macromolecular properties at the atomic scale thus provides opportunities for highly specific controls on mineralization; however, many limitations and challenges remain. We highlight studies employing in-situ atomic force microscopy (AFM) and transmission electron microscopy (TEM) to observe crystallization processes on or near macromolecular substrates. As the distribution and ability of these techniques increases, fundamental studies integrating experimental and computational methods will be crucial to inform a broad range of applications. Graphical abstract

Knight, Brenna M. (ORCID:0000000244000067)↗

Engineering the atomic structure of sequence-defined peptoid polymers and their assemblies

Peptoids are a family of sequence-defined, non-natural biomimetic polymers which show excellent properties including good chemical and enzymatic stability and high structural tunability. The solid-phase submonomer synthesis method allows precise control over the identity and sequence of chemically diverse side chains, enabling the atomic engineering of their chemical structures for a variety of applications. This unprecedented level of structural control enables access to atomically defined three-dimensional chain conformations and assemblies, facilitating the design and optimization of a variety of nanoscale architectures that can function in biology and materials science. In order to approach the rational design of peptoid materials in a more predictive and precise manner, it is crucial to fully understand how chemical information, in the form of the monomer sequence, encodes their folding and assembly into structurally defined, functional 3D shapes. Furthermore, this perspective focuses on recent studies into the atomic engineering of peptoid nanostructures by examining the impact of sequence variations on their secondary and three-dimensional structures, as well as their functional properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

PREDICTION OF FORBIDDEN ULTRAVIOLET AND VISIBLE EMISSIONS IN COMET 67P/CHURYUMOV–GERASIMENKO

Remote observation of spectroscopic emissions is a potential tool for the identification and quantification of various species in comets. The CO Cameron band (to trace CO{sub 2}) and atomic oxygen emissions (to trace H{sub 2}O and/or CO{sub 2}, CO) have been used to probe neutral composition in the cometary coma. Using a coupled-chemistry-emission model, various excitation processes controlling the CO Cameron band and different atomic oxygen and atomic carbon emissions have been modeled in comet 67P/Churyumov–Gerasimenko at 1.29 AU (perihelion) and at 3 AU heliocentric distances, which is being explored by ESA's Rosetta mission. The intensities of the CO Cameron band, atomic oxygen, and atomic carbon emission lines as a function of projected distance are calculated for different CO and CO{sub 2} volume mixing ratios relative to water. Contributions of different excitation processes controlling these emissions are quantified. We assess how CO{sub 2} and/or CO volume mixing ratios with respect to H{sub 2}O can be derived based on the observed intensities of the CO Cameron band, atomic oxygen, and atomic carbon emission lines. The results presented in this work serve as baseline calculations to understand the behavior of low out-gassing cometary coma and compare them with the higher gas production rate cases (e.g., comet Halley). Quantitative analysis of different excitation processes governing the spectroscopic emissions is essential to study the chemistry of inner coma and to derive neutral gas composition.

79 ASTRONOMY AND ASTROPHYSICS↗

Interfacial Atomic Structure of Twisted Few-Layer Graphene

A twist in bi- or few-layer graphene breaks the local symmetry, introducing a number of intriguing physical properties such as opening new bandgaps. Therefore, determining the twisted atomic structure is critical to understanding and controlling the functional properties of graphene. Combining low-angle annular dark-field electron microscopy with image simulations, we directly determine the atomic structure of twisted few-layer graphene in terms of a moiré superstructure which is parameterized by a single twist angle and lattice constant. This method is shown to be a powerful tool for accurately determining the atomic structure of two-dimensional materials such as graphene, even in the presence of experimental errors. Using coincidence-site-lattice and displacement-shift-complete theories, we show that the in-plane translation state between layers is not a significant structure parameter, explaining why the present method is adequate not only for bilayer graphene but also a few-layered twisted graphene.

36 MATERIALS SCIENCE↗

Heralded quantum gates for atomic systems assisted by the scattering of photons off single emitters

Quantum logic gates are essential in quantum information processing. Here, we propose three heralded schemes for universal quantum gates, including the controlled-NOT, Toffoli, and Fredkin gates on atomic systems, assisted by the scattering of photons off single emitters in one-dimensional waveguides. Interestingly, our schemes can turn faulty scattering processes of photons off atoms into the detection of the photon polarization. Furthermore, auxiliary atomic qubits are not needed and only one photon medium is adopted. With current technology, we discuss the feasibility of these universal quantum gates, concluding that they are feasible and scalable in solid-state quantum systems. We provide a different method for realizing universal quantum gates, and it may be useful in quantum information processing in the future.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Evaluation of selected thermal control coatings for long-life space structures

Graphite-reinforced resin matrix composites are being considered for spacecraft structural applications because of their light weight, high stiffness, and lower thermal expansion. Thin protective coatings with stable optical properties and the proper ratio of solar absorption (alpha sub s) to thermal emittance (epsilon) minimize orbital thermal extremes and protect these materials against space environment degradation. Sputtered coatings applied directly to graphite/epoxy composite surfaces and anodized coatings applied to thin aluminum foil were studied for use both as an atomic oxygen barrier and as thermal control coatings. Additional effort was made to develop nickel-based coatings which could be applied directly to composites. These coating systems were selected because their inherent tenacity made them potentially more reliable than commercial white paints for long-life space missions. Results indicate that anodized aluminum foil coatings are suitable for tubular and flat composite structures on large platforms in low Earth orbit. Anodized foil provides protection against some elements of the natural space environment (atomic oxygen, ultraviolet, and particulate radiation) and offers a broad range of tailored alpha sub s/epsilon. The foil is readily available and can be produced in large quantities, while the anodizing process is a routine commercial technique.

Teichman, Louis A.↗

Methods and devices configured to operated scanning tunneling microscopes using out-of-bandwidth frequency components added to bias voltage and related software

In the system and method disclosed, an ultrahigh vacuum (UHV) scanning tunneling microscope (STM) tip is used to selectively desorb hydrogen atoms from the Si(100)-2X1:H surface by injecting electrons at a negative sample bias voltage. A new lithography method is disclosed that allows the STM to operate under imaging conditions and simultaneously desorb H atoms as required. A high frequency signal is added to the negative sample bias voltage to deliver the required energy for hydrogen removal. The resulted current at this frequency and its harmonics are filtered to minimize their effect on the operation of the STM's feedback loop. This approach offers a significant potential for controlled and precise removal of hydrogen atoms from a hydrogen-terminated silicon surface and thus may be used for the fabrication of practical silicon-based atomic-scale devices.

Moheimani, Seyed Omid Reza↗

Methods and devices configured to operated scanning tunneling microscopes using out-of-bandwidth frequency components added to bias voltage and related software

In the system and method disclosed, an ultrahigh vacuum (UHV) scanning tunneling microscope (STM) tip is used to selectively desorb hydrogen atoms from the Si(100)-2X1:H surface by injecting electrons at a negative sample bias voltage. A new lithography method is disclosed that allows the STM to operate under imaging conditions and simultaneously desorb H atoms as required. A high frequency signal is added to the negative sample bias voltage to deliver the required energy for hydrogen removal. The resulted current at this frequency and its harmonics are filtered to minimize their effect on the operation of the STM's feedback loop. This approach offers a significant potential for controlled and precise removal of hydrogen atoms from a hydrogen-terminated silicon surface and thus may be used for the fabrication of practical silicon-based atomic-scale devices.

Moheimani, Seyed Omid Reza↗

Mending cracks atom-by-atom in rutile TiO2 with electron beam radiolysis

Abstract Rich electron-matter interactions fundamentally enable electron probe studies of materials such as scanning transmission electron microscopy (STEM). Inelastic interactions often result in structural modifications of the material, ultimately limiting the quality of electron probe measurements. However, atomistic mechanisms of inelastic-scattering-driven transformations are difficult to characterize. Here, we report direct visualization of radiolysis-driven restructuring of rutile TiO 2 under electron beam irradiation. Using annular dark field imaging and electron energy-loss spectroscopy signals, STEM probes revealed the progressive filling of atomically sharp nanometer-wide cracks with striking atomic resolution detail. STEM probes of varying beam energy and precisely controlled electron dose were found to constructively restructure rutile TiO 2 according to a quantified radiolytic mechanism. Based on direct experimental observation, a “two-step rolling” model of mobile octahedral building blocks enabling radiolysis-driven atomic migration is introduced. Such controlled electron beam-induced radiolytic restructuring can be used to engineer novel nanostructures atom-by-atom.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗