Search NASA⌕ Search

SEARCH · Search NASA

Results for “CHROMATICITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Testing Hopkins’ Bioclimatic Law with PhenoCam data

We investigated the spatial and temporal patterns of vegetation phenology with phenometrics derived from PhenoCam imagery. Specifically, we evaluated the Bioclimatic Law proposed by Hopkins, which relates phenological transitions to latitude, longitude, and elevation. “Green-up” and “green-down” dates—representing the start and end of the annual cycles of vegetation activity—were estimated from measures of canopy greenness calculated from digital repeat photography. We used data from 65 deciduous broadleaf (DB) forest sites, 18 evergreen needleleaf (EN) forest sites, and 21 grassland (GR) sites. DB green-up dates were well correlated with mean annual temperature and varied along spatial gradients consistent with the Bioclimatic Law. Interannual variation in DB phenology was most strongly associated with temperature anomalies during a relatively narrow window of time. EN phenology was not well correlated with either climatic factors or spatial gradients, but similar to DB phenology, interannual variation was most closely associated with temperature anomalies. For GR sites, mean annual precipitation explained most of the spatial variation in the duration of vegetation activity, whereas both temperature and precipitation anomalies explained interannual variation in phenology. PhenoCam data provide an objective and consistent means by which spatial and temporal patterns in vegetation phenology can be investigated.

54 ENVIRONMENTAL SCIENCES↗

Using phenology to unravel differential soil water use and productivity in a semiarid savanna

Savannas are water-limited ecosystems characterized by two dominant plant types: trees and an understory primarily made up grass. Different phenology and root structures of these plant types complicate how savanna primary productivity responds to changes in water availability. We tested the hypothesis that productivity in savannas is controlled by the temporal and vertical distribution of soil water content (SWC) and differences in growing season length of understory and tree plant functional types. To quantify the relationship between tree, understory, and savanna-wide phenology and productivity, we used PhenoCam and satellite observations surrounding an eddy covariance tower at a semiarid savanna site in Arizona, USA. We distinguished between SWC across two different depth intervals (shallow, <0–30 cm and deep, >30–100 cm). We found that tree greenness increased with SWC at both depths, while understory greenness was only sensitive to the shallower SWC measurements. Onset of ecosystem dormancy, estimated from satellite observations close to the eddy covariance tower, explained more variability in annual gross primary productivity (GPP) than in other phenometrics. Higher SWC led to an extended growing season, caused by delayed dormancy in trees, but the understory showed no evidence of delayed dormancy in wetter periods. We infer that the timing of ecosystem scale dormancy, driven by trees, is important in understanding changes in a savanna's GPP. These findings highlight the important effects of rainfall during the winter. These findings suggest that savanna GPP is conditional on different responses to moisture availability in each of the dominant vegetation components.

54 ENVIRONMENTAL SCIENCES↗

Cr(VI) reduction and physiological toxicity are impacted by resource ratio in Desulfovibrio vulgaris

Desulfovibrio spp. are capable of heavy metal reduction and are well-studied systems for understanding metal fate and transport in anaerobic environments. Desulfovibrio vulgaris Hildenborough was grown under environmentally relevant conditions (i.e., temperature, nutrient limitation) to elucidate the impacts on Cr(VI) reduction on cellular physiology. Growth at 20 °C was slower than 30 °C and the presence of 50 μM Cr(VI) caused extended lag times for all conditions, but once growth resumed the growth rate was similar to that without Cr(VI). Cr(VI) reduction rates were greatly diminished at 20 °C for both 50 and 100 μM Cr(VI), particularly for the electron acceptor limited (EAL) condition in which Cr(VI) reduction was much slower, the growth lag much longer (200 h), and viability decreased compared to balanced (BAL) and electron donor limited (EDL) conditions. When sulfate levels were increased in the presence of Cr(VI), cellular responses improved via a shorter lag time to growth. Similar results were observed between the different resource (donor/acceptor) ratio conditions when the sulfate levels were normalized (10 mM), and these results indicated that resource ratio (donor/acceptor) impacted D. vulgaris response to Cr(VI) and not merely sulfate limitation. The results suggest that temperature and resource ratios greatly impacted the extent of Cr(VI) toxicity, Cr(VI) reduction, and the subsequent cellular health via Cr(VI) influx and overall metabolic rate. The results also emphasized the need to perform experiments at lower temperatures with nutrient limitation to make accurate predictions of heavy metal reduction rates as well as physiological states in the environment.

59 BASIC BIOLOGICAL SCIENCES↗

Kinetics of Recycling CF/EP Composites by Thermal Excitation of Cr{sub 2}O{sub 3}

Recycling high performance carbon fibers (CFs) by thermal excitation of Cr{sub 2}O{sub 3} semiconductor was proposed. The kinetic model of decomposition of epoxy resin was established and the method for solving kinetic parameters was proposed. The influences of temperature and treatment time on the decomposition rate of epoxy resin were investigated. The kinetic equation was established and the accuracy was verified experimentally. The morphology of the recycled CF was observed and monofilament tensile strength was determined. Results indicated that temperature and treatment time had positive correlation with decomposition rate of the epoxy resin. The reaction order n was 1.5, with excitation energy E of 85.03 kJ·mol{sup −1} and pre-exponential factor k{sub 0} of 1.26 × 10{sup 6} min{sup −1}. The established kinetic equation could be used to estimate the temperature and treatment time. Prolongation of treatment time could improve the monofilament tensile strength. The monofilament tensile strength of the recycled CF at 480 °C for 30 min was 102.72% of that of the original CF, indicating that surface heat treatment was performed on CF during the recycling process.

36 MATERIALS SCIENCE↗

The Crystal Structure, Raman Spectra, and Magnetic Properties of HoCrO{sub 3} Annealed in Different Atmospheres

The crystal structure, phonon Raman scattering, and magnetic properties of HoCrO{sub 3} were studied in a way of impacting the oxygen site by annealing treatment in argon and oxygen atmospheres. Although there are no dramatic changes in magnetic properties, a negative magnetization phenomenon below T{sub N} was observed in all prepared HoCrO{sub 3} samples and a certain of lattice distortion was affected due to the variation of Ho–O bond length and Cr–O–Cr bond angle and bond lengths. The Raman spectra exhibit an obvious shift of mode-related Ho ion instead of modes involved with Cr, which unconsciously leads to the variation of effective paramagnetic moments. The magnetic properties were systematically analyzed by Curie-Weiss and modified Curie-Weiss laws. The effective magnetic moment and symmetric and antisymmetric exchange interactions of J{sub e} and D were discussed. The reduced effective magnetic moments in HoCrO{sub 3} and annealed ones demonstrate possible vacancies of Ho and Cr, which was verified by elemental composition tested by energy-dispersive X-ray spectroscopy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural, Optical, and Dielectric Studies on Sr-Doped Biferroic YCrO{sub 3}

In this work, the solid-state synthesis of Y{sub 1-x}Sr{sub x}CrO{sub 3} (x = 0.0, 0.1) samples has been reported. The X-ray diffraction data analysis confirmed that the synthesized samples have crystallized into the orthorhombic phase with the assigned space group Pbnm. The Rietveld refinement of the XRD data confirmed the structure and other related parameters. The slight variation in the lattice parameters and negligible shift in the reflection peaks reveals the uniform dispersion of Sr at Y-site in the parent YCrO{sub 3} matrix. The dielectric characterization revealed the good dielectric nature of the prepared samples which decreases with Sr doping. Field emission scanning electron microscopy (FE-SEM) revealed that an agglomeration type process has taken place in the sample preparation. Fourier transform infrared (FTIR) characterization witnessed the formation of orthorhombic phase of the samples under study displaying sharp absorption bands corresponding to Cr–O stretching, Y/Sr–O stretching, and O–Cr–O deformation vibration, respectively. UV-Vis spectroscopy analysis revealed the dual direct allowed bandgap of the samples assigned to the Cr{sup 3+} ion transition in the ground level.

36 MATERIALS SCIENCE↗

Magnetic Properties of MFeCrO{sub 4} (M = Co/Ni) Prepared by Solution Combustion Method

Single phase MFeCrO{sub 4} (M = Co/Ni) nanosized samples are prepared by solution combustion method using glycine as fuel. Lattice parameter obtained after Rietveld refinement of the powder x-ray diffraction pattern of CoCrFeO{sub 4} and NiCrFeO{sub 4} samples are 8.374 and 8.325 Å and corresponding crystallite sizes are 40 and 27 nm, respectively. FTIR spectra of both samples show tetrahedral and octahedral metal oxygen bond stretching peaks at 596 and 488 cm{sup −1}, indicating spinel phase formation. DC magnetisation study indicates that both samples are ferrimagnetic at room temperature, with CoCrFeO{sub 4} having a higher value of saturation magnetisation. Mössbauer spectra indicate the presence of magnetic relaxation in the samples. Also, the strength of interaction with nearest neighbour Fe{sup 3+} cations is higher in NiCrFeO{sub 4}.

36 MATERIALS SCIENCE↗

Effect of Mo-rich Fillers in Pulsed Current Gas Tungsten Arc Welding of Inconel 718 for Improved Strength and Hot Corrosion Resistance

The formation of Laves phase in the fusion zone of Inconel 718 welds is considered to be detrimental and requires major attention, as this phase deteriorates the mechanical properties and high-temperature corrosion resistance. This present study addresses the use of current pulsing technique on the gas tungsten arc welding of 5-mm-thick Inconel 718 plates. Nb-free fillers, namely ERNiCrMo-10 and ERNiCrMo-14, are chosen for joining these plates. Microstructure studies revealed the segregation of Mo-rich phases at the inter-dendritic regions of the fusion zone of both the weldments. Further, the occurrence of detrimental Laves phase was minimized while employing Mo-rich fillers. It is inferred from the tensile studies that the fractures occurred in the parent metal for ERNiCrMo-10 filler and at the fusion zone while employing ERNiCrMo-14. Room-temperature Charpy impact studies also affirm that the impact toughness of ERNiCrMo-10 welds is significantly greater than that of ERNiCrMo-14. Hot corrosion studies were performed on the coupons by exposing them to a synthetic molten salt environment comprising Na{sub 2}SO{sub 4} + 60%V{sub 2}O{sub 5} at 800 °C for 50 h. Owing to the presence of higher amounts of Cr{sub 2}O{sub 3} and NiO, both fusion zones exhibited better hot corrosion resistance than the parent metal. The novel outcome of the study reiterates that with the use of current pulsing and Mo-rich fillers, the detrimental phase shall be controlled.

36 MATERIALS SCIENCE↗

Effect of Oxygen Content on Wear and Cutting Performance of AlCrON Coatings

In this work, AlCrON coatings with various oxygen contents were deposited by multi-arc-ion plating technology. The effects of oxygen content on the microstructure, mechanical properties, wear and cutting performance of AlCrON coatings were investigated. The result showed that the O contents in the AlCrON coatings increased from 0 to 8.8 wt.% by changing the O{sub 2}/N{sub 2} flow ratios during the deposition process. The AlCrON coatings mainly included fcc-CrN and fcc-AlN phases, and the Al{sub 2}O{sub 3} and Cr{sub 2}O{sub 3} were also confirmed by the XPS results. Addition of oxygen improved the adhesion strength of AlCrON coatings. The AlCrON coating with 4.0 wt.% oxygen content showed the low surface roughness, low friction coefficient and the minimum wear rate. Cutting results also showed that addition of oxygen improved the service life of AlCrON coatings under various cutting conditions. The service life of AlCrON coatings increased firstly and then decreased with increasing oxygen contents, and the AlCrON coating with 4.0 wt.% oxygen content had the maximum cutting length under various cutting conditions, which might be due to the decrease of surface roughness, increase of adhesion strength and hardness. The wear mechanism involved in cutting process included abrasive wear, adhesive wear and oxidation wear.

36 MATERIALS SCIENCE↗

Stress Corrosion Cracking of AZ91 + xCe Alloy Using Proof Ring Test in ASTM D1384 and NaCl-K{sub 2}CrO{sub 4} Solutions

The effect of cerium addition on AZ91 magnesium alloy and its influence on stress corrosion cracking (SCC) were studied using constant load proof ring testing NaCl-K{sub 2}CrO{sub 4} and ASTM D1384 solutions at 70 and 80% of yield stress, respectively. The investigation revealed that the optimum grain refinement of desired phases occurred with 0.5% addition of cerium. The addition levels of cerium above 1.5 wt.% to AZ91 alloy resulted in premature failures due to poor SCC resistance in both solutions (K{sub 2}CrO{sub 4} and ASTM D1384 solutions). The microstructural studies of the experimental alloys were characterized by using optical and scanning electron microscopy. The elemental compositions of cerium-added AZ91 magnesium alloys were studied by energy-dispersive spectroscopy. The results indicate that the mode of SCC failure was found to be transgranular in nature along with secondary cracks containing cleavages which resulted from the hydrogen embrittlement and anodic dissolution phenomena. The AZ91 alloy with 0.5 wt.% cerium exhibits better mechanical properties and high stress corrosion resistance.

36 MATERIALS SCIENCE↗

Role of Alloy Chemistry on Stability of Passive Films in Austenitic Stainless Steel

This study dealt with characterizing oxide passive films in austenitic stainless steels with different chemical compositions. Stacking fault energy was estimated, and thermal conductivity at different temperatures (298, 673, 873 and 1073 K) were calculated. Steels specimens were plane strain compressed and subjected to anodic potentiodynamic polarization scan in a different deaerated testing environment. The deformed specimens were characterized using electron backscattered diffraction system and Fourier transform infrared spectroscopy (FTIR)-imaging. The Cr{sub 2}O{sub 3} peak from FTIR-imaging was captured, and area of the peak was calculated after anodic potentiodynamic polarization scan. The intensity of Cr{sub 2}O{sub 3} peak was related to deformed microstructural features.

36 MATERIALS SCIENCE↗

Effect of Cobalt on the Microstructure and Corrosion Behavior of Martensitic Age-Hardened Stainless Steel

To evaluate the influence of cobalt on the microstructure and pitting behavior of martensitic age-hardened stainless steel (MASS), the microstructures and electrochemical behaviors were characterized by optical microscopy, scanning electron microscopy, transmission electron microscopy, x-ray photoelectron spectroscopy, potentiodynamic curve, electrochemical impedance spectroscopy, and Mott–Schottky analysis. Results indicated that adding cobalt reduced the grain size of the original austenite, refined the lath martensite, inhibited the precipitation of Cu-rich phases, and increased the content of reversed austenite. Compared with the cobalt-free steel, the cobalt-containing steel has a higher pitting potential, lower corrosion current density, and higher pitting resistance. The primary components of the passive film grown on the cobalt-free steel included (Cr, Fe) oxides, such as Cr{sub 2}O{sub 3}, Cr(OH){sub 3}, FeOOH, and Fe{sub 2}O{sub 3}. The cobalt-containing steel included the aforementioned components as well as Co, which was attributed to the formation of the passive film in the forms of CoFe{sub 2}O{sub 4}, Co(OH){sub 2}, and CoO. In addition, the synergy of the refined lath martensite and the precipitation of the Cu-rich phase induced an increase in corrosion resistance in MASS containing cobalt.

36 MATERIALS SCIENCE↗

Hot Corrosion Behavior of Ni20Cr Alloy in NaVO{sub 3} Molten Salt

The hot corrosion behavior of Ni20Cr alloy was evaluated in NaVO{sub 3} at temperatures of up to 700 °C and compared to Inconel 600. The performance of both the alloys was evaluated using electrochemical measurements, such as potentiodynamic polarization, linear polarization resistance, and electrochemical impedance spectroscopy measurements, as well as a cyclic corrosion test. The results show that the Ni20Cr alloy has better corrosion performance than the Inconel 600. The better performance of the Ni20Cr alloy was due to its ability to develop a stable protector oxide (Cr{sub 2}O{sub 3}) on its surface.

36 MATERIALS SCIENCE↗

Hot Corrosion Performance of Single-Crystal CMSX-4 and CMSX-486 Superalloys in the Mixture of Na{sub 2}SO{sub 4}-NaCl Melts

A modification in the chemistry of single-crystal CMSX-4 to produce CMSX-486 superalloy has been reported in the literature to be accomplished without degradation in high-temperature mechanical performance. However, adequate attention has not yet been focussed on the hot corrosion response of the alloy considering its chemical composition modification. This paper reports for the first time that a considerable degradation in the hot corrosion resistance of CMSX-4 occurs by the modification of its chemistry. Corrosion tests at different salt concentrations and temperatures showed that the hot corrosion resistance of CMSX-486 is worse than the conventional CMSX-4 alloy. The difference in the corrosion resistance characteristics of the two alloys is attributable to the nature of the protective oxide layer formed on the materials during hot corrosion. Characterization using various advanced techniques revealed that the oxide layer formed on CMSX-486 consists of less amount of protective and coherent Al{sub 2}O{sub 3} and Cr{sub 2}O{sub 3} film than CMSX-4, and this is the reason for its poor hot corrosion resistance.

36 MATERIALS SCIENCE↗

Mechanistic insights into Cr(VI) removal by a combination of zero-valent iron and pyrite

Recent studies have revealed that a combination of zero-valent iron (ZVI) and pyrite (FeS 2 ) can effectively remove (Cr(VI)) from water, but the reasons behind this synergistic effect are still unclear. Our batch experiments showed that dissolved oxygen (DO) is a critical factor in the improved removal of Cr(VI) by ZVI and pyrite. When 0.08 g/L pyrite was combined with 0.5 g/L ZVI in the presence of DO, total Cr was reduced from 10 mg/L to 0.02 mg/L within 6 h. Conversely, in the absence of DO, total Cr was only reduced to 5.6 mg/L. DO oxidation of pyrite produced protons that promote ZVI corrosion, and mixing pyrite with water creates dissolved sulfide, which also contributes to the improved removal of Cr(VI). Here, electron microscopy images and X-ray absorption near edge structure analyses revealed that the presence of dissolved sulfide led to the formation of ferrous sulfide precipitates on the ZVI surface, preventing the formation of a passivating layer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Divergent effects of static disorder and hole doping in geometrically frustrated {beta}-CaCr{sub 2}O{sub 4}

The gallium substituted and calcium deficient variants of geometrically frustrated {beta}-CaCr{sub 2}O{sub 4}, {beta}-CaCr{sub 2-2x}Ga{sub 2x}O{sub 4} (0.02{<=}x{<=}0.25) and {beta}-Ca{sub 1-y}Cr{sub 2}O{sub 4} (0.075{<=}y{<=}0.15), have been investigated by X-ray powder diffraction, magnetization and specific heat measurements. This allows for a direct comparison of the effects, in a geometrically frustrated magnet, of the static disorder that arises from non-magnetic substitution and the dynamic disorder that arises from hole doping. In both cases, disturbing the Cr{sup 3+} lattice results in a reduction in the degree of magnetic frustration. On substitution of Ga, which introduces disorder without creating holes, a gradual release of spins from ordered antiferromagnetic states is observed. In contrast, in the calcium-deficient compounds the introduction of holes induces static ferrimagnetic ordering and much stronger perturbations of the {beta}-CaCr{sub 2}O{sub 4} host. - Graphical abstract: Scaled plot of the temperature dependence of the inverse susceptibility for {beta}-CaCr{sub 2-2x}Ga{sub 2x}O{sub 4} (closed symbols) and {beta}-Ca{sub 1-y}Cr{sub 2}O{sub 4} (open symbols). Data sets depicted in the same color contain equivalent amounts of Cr{sup 3+}.

36 MATERIALS SCIENCE↗

Magneto-thermal and dielectric properties of biferroic YCrO{sub 3} prepared by combustion synthesis

Microstructural, magnetothermal and dielectric properties of YCrO{sub 3} powders prepared by combustion and solid state methods have been studied by a combination of XRD, specific heat, magnetization and permittivity measurements. The TEM and XRD characterization confirm that the combustion powders are amorphous plate-like agglomerates of nano-sized crystalline particles. A more uniform grain size along with an increase of the relative density is observed by SEM in the sintered samples prepared by combustion route with respect to those produced by solid state reaction. Similar to the material obtained through solid state synthesis, the material prepared by the combustion method also shows spin canted antiferromagnetic ordering of Cr{sup +3} (S=3/2) at {approx}140 K, which is shown by magnetization as well as {lambda}-type anomaly in the total specific heat. Furthermore, the magnetic contribution to the total specific heat reveals spin fluctuations above T{sub N} and a spin reorientation transition at about 60 K. Both YCrO{sub 3} compounds show a diffuse phase transition at about 450 K, typical of a relaxor ferroelectric, which is characterized by a broad peak in the real part of the dielectric permittivity as a function of temperature, with the peak decreasing in magnitude and shifting to higher temperature as the frequency increases. The relaxor dipoles are due to the local non-centrosymmetric structure. Furthermore, the high loss tangent in a broad range of temperature as well as conductivity analysis indicates a hopping mechanism for the electronic conductivity as we believe it is a consequence of the outer d{sup 3}-shell, which have detrimental effects on the polarization and the pooling process in the YCrO{sub 3} bulk material. The more uniform particle size and higher density material synthesized through the combustion process leads to an improvement in the dielectric Properties. - Graphical abstract: Combustion method: An alternative route for synthesized a new family of multiferroics. Amorphous agglomerates of nano-sized particles of YCrO{sub 3} compounds.

36 MATERIALS SCIENCE↗