Search NASA⌕ Search

SEARCH · Search NASA

Results for “COMMUNICATION SIMULATOR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Turbomachinery Flows Modeled

Last year, researchers at the NASA Lewis Research Center used the average passage code APNASA to complete the largest three-dimensional simulation of a multistage axial flow compressor to date. Consisting of 29 blade rows, the configuration is typical of those found in aeroengines today. The simulation, which was executed on the High Performance Computing and Communications (HPCC) Program IBM SP2 parallel computer located at the NASA Ames Research Center, took nearly 90 hr to complete. Since the completion of this activity, a fine-grain, parallel version of APNASA has been written by a team of researchers from General Electric, NASA Lewis, and NYMA. Timing studies performed on the SP2 have shown that, with eight processors assigned to each blade row, the simulation time is reduced by a factor of six. For this configuration, the simulation time would be 15 hr. The reduction in computing time indicates that an overnight turnaround of a multistage configuration simulation is feasible. In addition, average passage forms of two-equation turbulence models were formulated. These models are currently being incorporated into APNASA.

Adamczyk, John J.↗

Update on Controlling Herds of Cooperative Robots

A document presents further information on the subject matter of "Controlling Herds of Cooperative Robots". The document describes the results of the computational simulations of a one-blimp, three-surface-sonde herd in various operational scenarios, including sensitivity studies as a function of distributed communication and processing delays between the sondes and the blimp. From results of the simulations, it is concluded that the methodology is feasible, even if there are significant uncertainties in the dynamical models.

Quadrelli, Marco↗

Air Traffic Control Improvement Using Prioritized CSMA

Version 7 simulations of the industry-standard network simulation software "OPNET" are presented of two applications of the Aeronautical Telecommunications Network (ATN), Controller Pilot Data Link Communications (CPDLC) and Automatic Dependent Surveillance-Broadcast mode (ADS-B), over VHF Data Link mode 2 (VDL-2). Communication is modeled for air traffic between just three cities. All aircraft are assumed to have the same equipage. The simulation involves Air Traffic Control (ATC) ground stations and 105 aircraft taking off, flying realistic free-flight trajectories, and landing in a 24-hr period. All communication is modeled as unreliable. Collision-less, prioritized carrier sense multiple access (CSMA) is successfully tested. The statistics presented include latency, queue length, and packet loss. This research may show that a communications system simpler than the currently accepted standard envisioned may not only suffice, but also surpass performance of the standard at a lower cost of deployment.

Robinson, Daryl C.↗

Predictive Capability Maturity Model (PCMM).

Predictive Capability Maturity Model (PCMM) is a communication tool that must include a dicussion of the supporting evidence. PCMM is a tool for managing risk in the use of modeling and simulation. PCMM is in the service of organizing evidence to help tell the modeling and simulation (M&S) story. PCMM table describes what activities within each element are undertaken at each of the levels of maturity. Target levels of maturity can be established based on the intended application. The assessment is to inform what level has been achieved compared to the desired level, to help prioritize the VU activities & to allocate resources.

99 GENERAL AND MISCELLANEOUS↗

Adaptive mesh refinement for shocks and material interfaces

There are three kinds of adaptive mesh refinement (AMR) in structured meshes. Block-based AMR sometimes over refines meshes. Cell-based AMR treats cells cell by cell and thus loses the advantage of the nature of structured meshes. Patch-based AMR is intended to combine advantages of block- and cell-based AMR, i.e., the nature of structured meshes and sharp regions of refinement. But, patch-based AMR has its own difficulties. For example, patch-based AMR typically cannot preserve symmetries of physics problems. In this paper, we will present an approach for a patch-based AMR for hydrodynamics simulations. The approach consists of clustering, symmetry preserving, mesh continuity, flux correction, communications, management of patches, and load balance. The special features of this patch-based AMR include symmetry preserving, efficiency of refinement across shock fronts and material interfaces, special implementation of flux correction, and patch management in parallel computing environments. To demonstrate the capability of the AMR framework, we will show both two- and three-dimensional hydrodynamics simulations with many levels of refinement.

99 GENERAL AND MISCELLANEOUS↗

A Distributed Trust Model Simulator for Energy Grid of Things Distributed Energy Resource Management System

The evolution of networks into more distributed, self-reliant nodes has mitigated single-point failures that plagued traditional centralized networks. Applied to power grids, distributed systems can increase the integrity and availability of grid services while also offering a power management solution. However, while distributed networks provide scalability, security, and sustainability compared to centralized networks, their distributed nature makes them harder for anomaly detection and prevention. Incorporating a Distributed Trust Model (DTM) System into an Energy Grid of Things Distributed Energy Resource Management System (EGOT DERMS) allows grid participants to be characterized and their communication to be analyzed for possible attacks. A Trust Model simulator is needed to evaluate and improve the DTM System.Trustworthiness is calculated using a Trust Model. While many trust models exist, most only consider 2-3 matrices to evaluate trust. The TM proposed in this thesis uses a Metric Vector of Trust (MVoT) monitoring 17 parameters when assessing trust. Moreover, unlike standard trust models, the proposed trust model establishes a method to test the trust between various actors within the network and probe the trust model itself. Using a Trust Model Simulator, MVoT calaculations, initial values, and parameters are fine-tuned to achieve high-confidence message classifications and minimize false positives. The DTM System and Trust Mode Simulation Suite allow for distributed trust evaluation with a real-time classification of EGOT DERMS actors, providing additional security for distributed systems.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

A Domain-Decomposed Multi-Level Method for Adaptively Refined Cartesian Grids with Embedded Boundaries

The work presents a new method for on-the-fly domain decomposition technique for mapping grids and solution algorithms to parallel machines, and is applicable to both shared-memory and message-passing architectures. It will be demonstrated on the Cray T3E, HP Exemplar, and SGI Origin 2000. Computing time has been secured on all these platforms. The decomposition technique is an outgrowth of techniques used in computational physics for simulations of N-body problems and the event horizons of black holes, and has not been previously used by the CFD community. Since the technique offers on-the-fly partitioning, it offers a substantial increase in flexibility for computing in heterogeneous environments, where the number of available processors may not be known at the time of job submission. In addition, since it is dynamic it permits the job to be repartitioned without global communication in cases where additional processors become available after the simulation has begun, or in cases where dynamic mesh adaptation changes the mesh size during the course of a simulation. The platform for this partitioning strategy is a completely new Cartesian Euler solver tarcreted at parallel machines which may be used in conjunction with Ames' "Cart3D" arbitrary geometry simulation package.

Aftosmis, M. J.↗

The ABACUS cosmological N -body code

We present abacus, a fast and accurate cosmological N-body code based on a new method for calculating the gravitational potential from a static multipole mesh. The method analytically separates the near- and far-field forces, reducing the former to direct 1/r 2 summation and the latter to a discrete convolution over multipoles. The method achieves 70 million particle updates per second per node of the Summit supercomputer, while maintaining a median fractional force error of 10 -5 . We express the simulation time-step as an event-driven ‘pipeline’, incorporating asynchronous events such as completion of co-processor work, input/output, and network communication. abacus has been used to produce the largest suite of N-body simulations to date, the abacussummit suite of 60 trillion particles, incorporating on-the-fly halo finding. abacus enables the production of mock catalogues of the volume and resolution required by the coming generation of cosmological surveys.

79 ASTRONOMY AND ASTROPHYSICS↗

Parallelized direct execution simulation of message-passing parallel programs

As massively parallel computers proliferate, there is growing interest in findings ways by which performance of massively parallel codes can be efficiently predicted. This problem arises in diverse contexts such as parallelizing computers, parallel performance monitoring, and parallel algorithm development. In this paper we describe one solution where one directly executes the application code, but uses a discrete-event simulator to model details of the presumed parallel machine such as operating system and communication network behavior. Because this approach is computationally expensive, we are interested in its own parallelization specifically the parallelization of the discrete-event simulator. We describe methods suitable for parallelized direct execution simulation of message-passing parallel programs, and report on the performance of such a system, Large Application Parallel Simulation Environment (LAPSE), we have built on the Intel Paragon. On all codes measured to date, LAPSE predicts performance well typically within 10 percent relative error. Depending on the nature of the application code, we have observed low slowdowns (relative to natively executing code) and high relative speedups using up to 64 processors.

Dickens, Phillip M.↗

Software To Secure Distributed Propulsion Simulations

Distributed-object computing systems are presented with many security threats, including network eavesdropping, message tampering, and communications middleware masquerading. NASA Glenn Research Center, and its industry partners, has taken an active role in mitigating the security threats associated with developing and operating their proprietary aerospace propulsion simulations. In particular, they are developing a collaborative Common Object Request Broker Architecture (CORBA) Security (CORBASec) test bed to secure their distributed aerospace propulsion simulations. Glenn has been working with its aerospace propulsion industry partners to deploy the Numerical Propulsion System Simulation (NPSS) object-based technology. NPSS is a program focused on reducing the cost and time in developing aerospace propulsion engines

Blaser, Tammy M.↗

Design of a monitor and simulation terminal (master) for space station telerobotics and telescience

Based on Space Station and planetary spacecraft communication time delays and bandwidth limitations, it will be necessary to develop an intelligent, general purpose ground monitor terminal capable of sophisticated data display and control of on-orbit facilities and remote spacecraft. The basic elements that make up a Monitor and Simulation Terminal (MASTER) include computer overlay video, data compression, forward simulation, mission resource optimization and high level robotic control. Hardware and software elements of a MASTER are being assembled for testbed use. Applications of Neural Networks (NNs) to some key functions of a MASTER are also discussed. These functions are overlay graphics adjustment, object correlation and kinematic-dynamic characterization of the manipulator.

Lopez, L.↗

NASA's flight-technological development program - A 650 Mbps laser communications testbed

A 650 Mbps laser communications testbed under construction for the development of flight qualifiable hardware suitable for near-term operation on geosynchronous-to-geosynchronous crosslink missions is presented. The program's primary purpose is to develop and optimize laser communications unique subsystems. Requirements for the testbed experiments are to optimize the acquisition processes, to fully simulate the long range (up to 21,000 km) and the fine tracking characteristics of two narrow-beam laser communications terminals, and to fully test communications performance which will include average and burst bit error rates, effects of laser diode coalignment, degradation due to internal and external stray light, and the impact of drifts in the optical components.

Hayden, W. L.↗

Low-Overhead In Situ Visualization Using Halo Replay

In situ visualization and analysis is of increasing importance as the compute and I/O gap further widens with the advance to exascale capable computing. Yet, in situ methods impose resource constraints leading to the difficult task of balancing simulation code performance and the quality of analysis. Applications with tightly-coupled in situ visualization often achieve performance through spatial and temporal downsampling, a tradeoff which risks not capturing transient phenomena at sufficient fidelity. Determining a priori visualization parameters such as sampling rate is difficult without time and resource intensive experimentation. We present a method for reducing resource contention between in situ visualization and stencil codes on heterogeneous systems. This method permits full resolution replay through recording halos and the communication-free reconstruction of interior values uncoupled from the main simulation. We apply this method in the computational fluid dynamics (CFD) code HARVEY [1] on the Summit supercomputer. We demonstrate minimal-overhead, in situ visualization relative to simulation alone, and compare the Halo Replay performance to tightly-coupled in situ approaches.

Ames, Jeff↗

Communication

NASA s communication work for the UAS Command and Control area will build upon work currently being conducted under NASA Recovery Act funds. Communication portions of UAS NextGen ConOps, Stateof- the-Art assessment, and Gap Analysis. Preliminary simulations for UAS CNPC link scalability assessment. Surrogate UAS aircraft upgrades. This work will also leverage FY10 in-guide funding for communication link model development. UAS are currently managed through exceptions and are operating using DoD frequencies for line-of-sight (LOS) and satellite-based communications links, low-power LOS links in amateur bands, or unlicensed Instrument/Scientific/Medical (ISM) frequencies. None of these frequency bands are designated for Safety and Regularity of Flight. No radio-frequency (RF) spectrum has been allocated by the International Telecommunications Union (ITU) specifically for UAS command and control links, for either LOS or Beyond LOS (BLOS) communication.

Griner, James↗

Evaluating MPI resource usage summary statistics

The Message Passing Interface (MPI) remains the dominant programming model for scientific applications running on today’s high-performance computing (HPC) systems. This dominance stems from MPI’s powerful semantics for inter-process communication that has enabled scientists to write applications for simulating important physical phenomena. MPI does not, however, specify how messages and synchronization should be carried out. Those details are typically dependent on low-level architecture details and the message characteristics of the application. Therefore, analyzing an application’s MPI resource usage is critical to tuning MPI’s performance on a particular platform. The result of this analysis is typically a discussion of the mean message sizes, queue search lengths and message arrival times for a workload or set of workloads. While a discussion of the arithmetic mean in MPI resource usage might be the most intuitive summary statistic, it is not always the most accurate in terms of representing the underlying data. In this paper, we analyze MPI resource usage for a number of key MPI workloads using an existing MPI trace collector and discrete-event simulator. Our analysis demonstrates that the average, while easy and efficient to calculate, is a useful metric for characterizing latency and bandwidth measurements, but may not be a good representation of application message sizes, match list search depths, or MPI inter-operation times. Additionally, we show that the median and mode are superior choices in many cases. We also observe that the arithmetic mean is not the best representation of central tendency for data that are drawn from distributions that are multi-modal or have heavy tails. Furthermore, the results and analysis of our work provide valuable guidance on how we, as a community, should discuss and analyze MPI resource usage data for scientific applications.

97 MATHEMATICS AND COMPUTING↗

Electromagnetically induced transparency with large delay-bandwidth product induced by magnetic resonance near field coupling to electric resonance

In this paper, we numerically and experimentally demonstrate electromagnetically induced transparency (EIT)-like spectral response with magnetic resonance near field coupling to electric resonance. Six split-ring resonators and a cut wire are chosen as the bright and dark resonator, respectively. An EIT-like transmission peak located between two dips can be observed with incident magnetic field excitation. A large delay bandwidth product (0.39) is obtained, which has potential application in quantum optics and communications. The experimental results are in good agreement with simulated results.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Sensitivity and Uncertainty Workflow of Full System SIERRA Models Supporting High Consequence Applications (Executive Summary)

The overall goal of this work was to advance the integrated workflow capabilities to provide the weapon system analysts the tools to construct, communicate and robustly execute end-to-end computational simulation models and analysis. Specifically, this includes developing and running automated, CompSim workflows that map model inputs to responses from large-scale studies executed on a distributed, heterogenous computing environment (e.g., CAD applications on Windows laptop to Sierra FEM codes on Trinity within a single workflow). The workflows developed enable ensemble calculations in support of ND program decisions, including sensitivity analysis, optimization and uncertainty quantification.

97 MATHEMATICS AND COMPUTING↗

Mars lander deorbit trajectory analysis

Mars lander deorbit trajectory sensitivity analysis for fixed flight path and communications angles at atmospheric entry, comparing with Monte Carlo simulation

Euler, E. A.↗