Search NASA⌕ Search

SEARCH · Search NASA

Results for “Color Evaluation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Bio-Optics of the Chesapeake Bay from Measurements and Radiative Transfer Calculations

We combined detailed bio-optical measurements and radiative transfer (RT) modeling to perform an optical closure experiment for optically complex and biologically productive Chesapeake Bay waters. We used this experiment to evaluate certain assumptions commonly used when modeling bio-optical processes, and to investigate the relative importance of several optical characteristics needed to accurately model and interpret remote sensing ocean-color observations in these Case 2 waters. Direct measurements were made of the magnitude, variability, and spectral characteristics of backscattering and absorption that are critical for accurate parameterizations in satellite bio-optical algorithms and underwater RT simulations. We found that the ratio of backscattering to total scattering in the mid-mesohaline Chesapeake Bay varied considerably depending on particulate loading, distance from land, and mixing processes, and had an average value of 0.0128 at 530 nm. Incorporating information on the magnitude, variability, and spectral characteristics of particulate backscattering into the RT model, rather than using a volume scattering function commonly assumed for turbid waters, was critical to obtaining agreement between RT calculations and measured radiometric quantities. In situ measurements of absorption coefficients need to be corrected for systematic overestimation due to scattering errors, and this correction commonly employs the assumption that absorption by particulate matter at near infrared wavelengths is zero.

Tzortziou, Maria↗

Virtual Guidance Ultrasound: A Tool to Obtain Diagnostic Ultrasound for Remote Environments

Astronauts currently acquire ultrasound images on the International Space Station with the assistance of real-time remote guidance from an ultrasound expert in Mission Control. Remote guidance will not be feasible when significant communication delays exist during exploration missions beyond low-Earth orbit. For example, there may be as much as a 20- minute delay in communications between the Earth and Mars. Virtual-guidance, a pre-recorded audio-visual tutorial viewed in real-time, is a viable modality for minimally trained scanners to obtain diagnostically-adequate images of clinically relevant anatomical structures in an autonomous manner. METHODS: Inexperienced ultrasound operators were recruited to perform carotid artery (n = 10) and ophthalmic (n = 9) ultrasound examinations using virtual guidance as their only instructional tool. In the carotid group, each each untrained operator acquired two-dimensional, pulsed, and color Doppler of the carotid artery. In the ophthalmic group, operators acquired representative images of the anterior chamber of the eye, retina, optic nerve, and nerve sheath. Ultrasound image quality was evaluated by independent imaging experts. RESULTS: Eight of the 10 carotid studies were judged to be diagnostically adequate. With one exception the quality of all the ophthalmic images were adequate to excellent. CONCLUSION: Diagnostically-adequate carotid and ophthalmic ultrasound examinations can be obtained by untrained operators with instruction only from an audio/video tutorial viewed in real time while scanning. This form of quick-response-guidance, can be developed for other ultrasound examinations, represents an opportunity to acquire important medical and scientific information for NASA flight surgeons and researchers when trained medical personnel are not present. Further, virtual guidance will allow untrained personnel to autonomously obtain important medical information in remote locations on Earth where communication is difficult or absent.

Caine,Timothy L.↗

B- and A-Type Stars in the Taurus-Auriga Star-Forming Region

We describe the results of a search for early-type stars associated with the Taurus-Auriga molecular cloud complex, a diffuse nearby star-forming region noted as lacking young stars of intermediate and high mass. We investigate several sets of possible O, B, and early A spectral class members. The first is a group of stars for which mid-infrared images show bright nebulae, all of which can be associated with stars of spectral-type B. The second group consists of early-type stars compiled from (1) literature listings in SIMBAD, (2) B stars with infrared excesses selected from the Spitzer Space Telescope survey of the Taurus cloud, (3) magnitude- and color-selected point sources from the Two Micron All Sky Survey, and (4) spectroscopically identified early-type stars from the Sloan Digital Sky Survey coverage of the Taurus region. We evaluated stars for membership in the Taurus-Auriga star formation region based on criteria involving: spectroscopic and parallactic distances, proper motions and radial velocities, and infrared excesses or line emission indicative of stellar youth. For selected objects, we also model the scattered and emitted radiation from reflection nebulosity and compare the results with the observed spectral energy distributions to further test the plausibility of physical association of the B stars with the Taurus cloud. This investigation newly identifies as probable Taurus members three B-type stars: HR 1445 (HD 28929), τ Tau (HD 29763), 72 Tau (HD 28149), and two A-type stars: HD 31305 and HD 26212, thus doubling the number of stars A5 or earlier associated with the Taurus clouds. Several additional early-type sources including HD 29659 and HD 283815 meet some, but not all, of the membership criteria and therefore are plausible, though not secure, members.

B- and A-Type↗

Radiation damage and annealing in plutonium tetrafluoride

Plutonium tetrafluoride that was separated prior to 1966 at the Hanford Site in Washington State was analyzed at the Pacific Northwest National Laboratory (PNNL) in 2015 and 2016. The plutonium tetrafluoride, as received, was an off-normal color and considering the age of the plutonium, there were questions about the condition of the material. These questions had to be answered in order to determine the suitability of the material for future use or long-term storage. Therefore, Thermogravimetric/Differential Thermal Analysis and X-ray Diffraction evaluations were conducted to determine the plutonium’s crystal structure, oxide content, and moisture content; these analyses reported that the plutonium was predominately amorphous and tetrafluoride, with an oxide content near ten percent. Freshly fluorinated plutonium tetrafluoride is known to be monoclinic. During the initial Thermogravimetric/Differential Thermal analyses, it was discovered that an exothermic event occurred within the material near 414°C. X-ray Diffraction analyses were conducted on the annealed tetrafluoride. The X-ray Diffraction analyses indicated that some degree of recrystallization occurred in conjunction with the 414°C event. The following commentary describes the series of Thermogravimetric/Differential Thermal and X-ray Diffraction analyses that were conducted as part of this investigation at PNNL, in collaboration with the University of Utah Nuclear Engineering Program.

McCoy, Kaylyn↗

Rapidity gap events in squark pair production at the LHC

The exchange of electroweak gauginos in the t or u channel allows squark pair production at hadron colliders without color exchange between the squarks. This can give rise to events where little or no energy is deposited in the detector between the squark decay products. We discuss the potential for detection of such rapidity-gap events at the Large Hadron Collider. Our numerical analysis is divided into two parts. First, we evaluate in a simplified framework the rapidity-gap signal at the parton level. The second part covers an analysis with full event simulation using PYTHIA as well as Herwig++, but without detector simulation. We analyze the transverse energy deposited between the jets from squark decay, as well as the probability of finding a third jet in between the two hardest jets. For the minimal supergravity benchmark point SPS1a we find statistically significant evidence for a color-singlet exchange contribution. The systematical differences between current versions of PYTHIA and HERWIG++ are larger than the physical effect from color-singlet exchange; however, these systematic differences could be reduced by tuning both Monte Carlo generators on normal QCD dijet data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The ALFALFA-SDSS Galaxy Catalog

We present a H i optical catalog of ~30,000 galaxies based on the 100% complete Arecibo Legacy Fast Arecibo L-band Feed Array (ALFALFA) survey combined with data from the Sloan Digital Sky Survey (SDSS). Our goal is to facilitate the public use of the completed ALFALFA catalog by providing carefully determined matches to SDSS counterparts, including matches for ~10,000 galaxies that do not have SDSS spectra. These identifications can provide a basis for further crossmatching with other surveys using SDSS photometric IDs as a reference point. We derive absolute magnitudes and stellar masses for each galaxy using optical colors combined with an internal reddening correction designed for small- and intermediate-mass galaxies with active star formation. We also provide measures of stellar masses and star formation rates based on infrared and/or ultraviolet photometry for galaxies that are detected by the Wide-field Infrared Survey Explorer and/or the Galaxy Evolution Explorer. Finally, we compare the galaxy population in the ALFALFA-SDSS sample with the populations in several other publicly available galaxy catalogs and confirm that ALFALFA galaxies typically have lower masses and bluer colors.

79 ASTRONOMY AND ASTROPHYSICS↗

Evaluation of experimentally measured and model-calculated pH for rock-brine-CO2 systems under geologic CO2 sequestration conditions

pH is an essential parameter for understanding the geochemical reactions that occur in rock-brine-CO2 systems when CO2 is injected into deep geologic formations for long-term storage. Due to a lack of reliable experimental methods, most laboratory studies conducted under geological CO2 sequestration (GCS) conditions have relied on thermodynamic modeling to estimate pH. The accuracy of these model predictions is typically uncertain. In our previous work, we have developed a method for pH determination by in-situ spectrophotometry. In the present work, we expanded the applicable pH range for this method and measured the pH of several rock-brine-CO2 systems at GCS conditions for five rock samples collected from ongoing GCS demonstration projects. Experimental measurements were compared with pH values calculated using several geochemical modeling approaches. The effect of different thermodynamic databases on the accuracy of model prediction was evaluated. Results indicate that the accuracy of model calculations is rock-dependent. For rocks comprised of carbonate and sandstone, model results generally agreed well with experimentally measured pH; however, for basalt, significant differences were observed. These discrepancies may be due to the models’ failure to fully account for certain reaction occurring between the basalt minerals the CO2-saturated brine solutions.

pH, carbon sequestration↗

Evaluation of remote sensing in control of pink cotton bollworm

The author has identified the following significant results. This investigation is attempting to evaluate the use of a satellite in monitoring the cotton production regulation program of the State of California as an aid in controlling pink bollworm infestation in the southern deserts of California. Color combined images of ERTS-1 multispectral images simulating color infrared are being used in crop identification. The status of each field is mapped from the imagery and is then compared to ground surveys taken at the time of each ERTS-1 overflight. Correlation has been to date 100%. A computer analysis will be performed to compare field status with the crop calendar in order to identify crops. Correlation is expected to be 80 to 90%. Cotton fields, because of their state regulated season which is exactly coincident with no other crop, are expected to be easily identified.

Lewis, L. N.↗

Evaluation of remote sensing in control of pink bollworm in cotton

The author has identified the following significant results. The main objective is to evaluate the use of a satellite in monitoring the cotton production regulation program of the State of California as an aid in controlling pink bollworm infestation in the southern deserts of California. Color combined images of ERTS-1 multispectral images simulating color infrared are being used for crop identification. The status of each field (i.e., crop, bare, harvested, wet, plowed) is mapped from the imagery and is then compared to ground survey information taken at the time of ERTS-1 overflights. A computer analysis has been performed to compare field and satellite data to a crop calendar. Correlation to data has been 97% for field condition. Actual crop identification varies; cotton identification is only 63% due to lack of full season coverage.

Lewis, L. N.↗

Evaluation of remote sensing in control of pink bollworm in cotton

The author has identified the following significant results. This investigation is to evaluate the use of a satellite in monitoring the cotton production regulation program of the State of California as an aid in controlling pink bollworm infestation in the southern deserts of California. Color combined images of ERTS-1 multispectral images simulating color infrared are being used for crop identification. The status of each field (crop, bare, harvested, wet, plowed) is mapped from the imagery and is then compared to ground survey information taken at the time of ERTS-1 overflights. A computer analysis has been performed to compare field and satellite data to a crop calendar. Correlation to date has been 97% for field condition. Actual crop identification varies; cotton identification is only 63% due to lack of full season coverage.

Lewis, L. N.↗

Remote sensing techniques applied to multispectral recognition of the Aranjuez pilot zone

A rectangular (7 x 14 km) area 40 km S of Madrid was remote-sensed with a three-stage recognition process. Ground truth was established in the first phase, airborne sensing with a multispectral scanner and photographic cameras were used in the second phase, and Landsat satellite data were obtained in the third phase. Agronomic and hydrological photointerpretation problems are discussed. Color, black/white, and labeled areas are displayed for crop recognition in the land-use survey; turbidity, concentrations of pollutants and natural chemicals, and densitometry of the water are considered in the evaluation of water resources.

Lemos, G. L.↗

Simulation modeling and preliminary analysis of TIMS data from the Carlin area and the northern Grapevine Mountains, Nevada

A theoretical radiance model was employed together with laboratory data on a suite of igneous rock to evaluate various algorithms for processing Thermal Infrared Multispectral Scanner (TIMS) data. Two aspects of the general problem were examined: extraction of emissivity information from the observed TIMS radiance data, and how to use emissivity data in a way that is geologically meaningful. The four algorithms were evaluated for appropriate band combinations of TIMS data acquired on both day and night overflights of the Tuscarora Mountains, including the Carlin gold deposit, in north-central Nevada. Analysis of a color composited PC decorrelated image (Bands 3, 4, 5--blue/green/red) of the Northern Grapevine Mountains, Nevada, area showed some useful correlation with the regional geology. The thermal infrared region provides fundamental spectral information that can be used to discriminate the major rock types occurring on the Earth's surface.

Watson, Ken↗

Preliminary results of a flight investigation of rotorcraft control and display laws for hover

A flight experiment designed to evaluate the effects of compatible versus incompatible display and control system response characteristics, and to evaluate a candidate display law design methodology, is described. The experiment was conducted on the NASA/Army CH-47B variable-stability helicopter using its model-following control system and a color, panel-mounted display. Three control response types representative of modern highly augmented rotorcraft and three corresponding sets of display dynamics were considered for three hover and low-speed tasks performed in simulated instrument conditions. Preliminary results based on pilot handling qualities ratings and comments indicate that performance and workload can be significantly affected by certain control and display combinations and that the display design methodology shows promise for improving the handling qualities of rotorcraft operating in conditions of low visibility.

Eshow, Michelle M.↗

Preliminary analysis of Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) for mineralogic mapping at sites in Nevada and Colorado

Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) data for sites in Nevada and Colorado were evaluated to determine their utility for mineralogical mapping in support of geologic investigations. Equal energy normalization is commonly used with imaging spectrometer data to reduce albedo effects. Spectra, profiles, and stacked, color-coded spectra were extracted from the AVIRIS data using an interactive analysis program (QLook) and these derivative data were compared to Airborne Imaging Spectrometer (AIS) results, field and laboratory spectra, and geologic maps. A feature extraction algorithm was used to extract and characterize absorption features from AVIRIS and laboratory spectra, allowing direct comparison of the position and shape of absorption features. Both muscovite and carbonate spectra were identified in the Nevada AVIRIS data by comparison with laboratory and AIS spectra, and an image was made that showed the distribution of these minerals for the entire site. Additional, distinctive spectra were located for an unknown mineral. For the two Colorado sites, the signal-to-noise problem was significantly worse and attempts to extract meaningful spectra were unsuccessful. Problems with the Colorado AVIRIS data were accentuated by the IAR reflectance technique because of moderate vegetation cover. Improved signal-to-noise and alternative calibration procedures will be required to produce satisfactory reflectance spectra from these data. Although the AVIRIS data were useful for mapping strong mineral absorption features and producing mineral maps at the Nevada site, it is clear that significant improvements to the instrument performance are required before AVIRIS will be an operational instrument.

Kruse, Fred A.↗

Visualizing Multi-process CPU Utilization using CUSP

The CPU Utilization Statistics Plotter (CUSP) tool automates the interpretation of detailed CPU Utilization trace data and statistics. It puts you on the cusp of understanding how CPU resources are split among the many parallel components of a software system.CUSP combines time-sampled CPU utilization numbers and Event Log annotations to generate human-readable plots and tables. It automatically splits up large CPU usage log files around interesting events, determines and highlights just the tasks of primary relevance by evaluating their changing contribution to each plot's total CPU usage, automatically eliminates irrelevant tasks, provides context by labeling plots with names and durations of all active commands, and uses consistent color-coding to enable quick visual comparison across multiple plots.CUSP has been used to process CPU Utilization trace logs on the Mars Science Laboratory and the Mars 2020 Rover missions during flight software development and Flight Operations on the Martian surface since December 2013.

Maimone, Mark W↗

Exotic states and rare B {sub s }-decays in the covariant quark model

The consequences of treating X(3872) meson as a tetraquark bound state are explored. The covariant quark model that effectively includes infrared confinement is employed as a dynamical framework. The strong decay widths of observed channels X → J/Ψ + 2π(3π) and X → + D-bar {sup 0} + D{sup 0} + π{sup 0} are calculated via the intermediate off-shell states X → J/Ψ + ρ(ω) and X → D + D*. For reasonable values of the size parameter Λ{sub X }of X(3872) meson the results are found to be consistent with the available experimental data. The possible impact of X(3872) on the behavior of the total cross section of J/Ψ dissociation by light particles within the framework of the s-channel dominance description is also discussed. The single-photon decay X → γ + J/Ψ is then analyzed. To introduce electromagnetic interactions, a nonlocal effective Lagrangian, which describes an interaction of X(3872) meson with its four constituent quarks, is gauged by using the P-exponential path-independent formalism. The matrix element of the transition X → γ + J/Ψ is evaluated and its gauge invariance is proved. The decay width of X → γ + J/Ψ and longitudinal/transverse composition of J/Ψ in this decay are calculated. For a reasonable value of the size parameter Λ{sub X }of X(3872) meson, the results are found to be consistent with the available experimental data. The helicity and multipole amplitudes of the process are computed as well, and the procedure of obtaining them from the covariant transition amplitude by using the covariant projection is described. Considering the surge of great interest to the problem of CP violation recently observed in a B {sub s }−{ie749-2} system, decays of B {sub s }to D-{ie749-3} and color suppressed decay B {sub s }→ J/Ψ ϕ attracted the attention of both theorists and experimentalists. We find new values for the covariant quark model parameters (with built-in infrared confinement) in the meson sector by fitting the leptonic decay constants and a number of electromagnetic decays, and then evaluate in a parameter-free way the form factors of B(B {sub s }) → P(V) transitions within an entire kinematic range of the momentum transfer. Our results are applied to calculating the widths of nonleptonic B {sub s }decays to D{sup −}{sub s }D{sup +}{sub s }, {ie749-4}, and {ie749-5}. The largest contribution to Δγ for B {sub s }-{ie749-6} system comes from these modes. The nonleptonic decay B {sub s }→ J/Ψϕ is also considered. Though this decay mode is color suppressed it has important implications in the search for possible CP-violating novel physics effects in B {sub s }-{ie749-7} mixing.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Geologic analyses of LANDSAT-1 multispectral imagery of a possible power plant site employing digital and analog image processing

A site in the Great Valley subsection of the Valley and Ridge physiographic province in eastern Pennsylvania was studied to evaluate the use of digital and analog image processing for geologic investigations. Ground truth at the site was obtained by a field mapping program, a subsurface exploration investigation and a review of available published and unpublished literature. Remote sensing data were analyzed using standard manual techniques. LANDSAT-1 imagery was analyzed using digital image processing employing the multispectral Image 100 system and using analog color processing employing the VP-8 image analyzer. This study deals primarily with linears identified employing image processing and correlation of these linears with known structural features and with linears identified manual interpretation; and the identification of rock outcrops in areas of extensive vegetative cover employing image processing. The results of this study indicate that image processing can be a cost-effective tool for evaluating geologic and linear features for regional studies encompassing large areas such as for power plant siting. Digital image processing can be an effective tool for identifying rock outcrops in areas of heavy vegetative cover.

Lovegreen, J. R.↗

A COMPARATIVE STUDY OF DENSITY FIELD ESTIMATION FOR GALAXIES: NEW INSIGHTS INTO THE EVOLUTION OF GALAXIES WITH ENVIRONMENT IN COSMOS OUT TO z ∼ 3

It is well-known that a galaxy’s environment has a fundamental influence in shaping its properties. We study the environmental effects on galaxy evolution, with an emphasis on the environment defined as the local number density of galaxies. The density field is estimated with different estimators (weighted adaptive kernel smoothing, 10th and 5th nearest neighbors, Voronoi and Delaunay tessellation) for a K{sub s} < 24 sample of ∼190,000 galaxies in the COSMOS field at 0.1 < z < 3.1. The performance of each estimator is evaluated with extensive simulations. We show that overall there is a good agreement between the estimated density fields using different methods over ∼2 dex in overdensity values. However, our simulations show that adaptive kernel and Voronoi tessellation outperform other methods. Using the Voronoi tessellation method, we assign surface densities to a mass complete sample of quiescent and star-forming galaxies out to z ∼ 3. We show that at a fixed stellar mass, the median color of quiescent galaxies does not depend on their host environment out to z ∼ 3. We find that the number and stellar mass density of massive (>10{sup 11} M{sub ⊙}) star-forming galaxies have not significantly changed since z ∼ 3, regardless of their environment. However, for massive quiescent systems at lower redshifts (z ≲ 1.3), we find a significant evolution in the number and stellar mass densities in denser environments compared to lower density regions. Our results suggest that the relation between stellar mass and local density is more fundamental than the color–density relation and that environment plays a significant role in quenching star-formation activity in galaxies at z ≲ 1.

79 ASTRONOMY AND ASTROPHYSICS↗