Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffraction pattern”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Electric and dielectric properties of Bi-doped CaCu{sub 3}Ti{sub 4}O{sub 12} ceramics

Pure and Bi-doped Bi{sub x}CaCu{sub 3}Ti{sub 4}O{sub 12+1.5x} (BCCTO, x=0, 0.15, 0.25, and 0.3) ceramics were fabricated by the solid-state sintering method. The results indicate that the additional bismuth has a great influence on both the microstructures and the electric properties. A new phase (Bi{sub 4}Ti{sub 3}O{sub 12}) can be observed in the doped samples from the x-ray diffraction patterns. Additionally, the CCTO gain size can be controlled by bismuth content. All of the BCCTO samples show high dielectric permittivity ({approx}10{sup 4} at 10{sup 3} Hz) and varistor effect, and the relaxation peak shifts to higher frequency. The resistance rises with the increase in bismuth, and the activation energy at the grain boundary is reduced from 0.65 to 0.47 eV.

36 MATERIALS SCIENCE↗

Modification of surface functionality and interlayer spacing of multi-walled carbon nanotubes using {gamma}-rays

The surface functionality and interlayer spacing changes induced by {gamma}-ray irradiation were investigated in multi-walled carbon nanotubes (MWCNTs). The modification effect of MWCNTs irradiated in air and epoxy chloropropane (ECP) was characterized by x-ray photoelectron spectroscopy, Raman spectroscopy, and x-ray diffraction. The results indicated that {gamma}-ray irradiation in two different media improved the amount of oxygen-containing functional groups on nanotube surface, and the irradiation in ECP was more efficient. Compared with the pristine MWCNTs, the MWCNTs irradiated in air exhibited a decrease in width of G band and intensity ratio of D to G band in the Raman spectra and an increase in intensity and diffraction angle of (002) characteristic x-ray peak. However, the MWCNTs tended to show the opposite behaviors in Raman spectra and x-ray diffraction patterns after they were irradiated in ECP. This preliminary study suggests that {gamma}-ray irradiation in air can meaningfully decrease the interlayer distance of MWCNTs and improve the graphitization of MWCNTs, while irradiation in ECP disorders and breaks the structure of MWCNTs. It is worth expecting that MWCNTs can be functionalized by {gamma}-rays in reactive liquid and also be employed for preventing {gamma}-ray radiation from reaching sensitive materials at least for short term experiments in air.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis and characterization of porous structured ZnO thin film for dye sensitized solar cell applications

Zinc oxide (ZnO) and zinc oxide/eosin yellow (ZnO/EY) thin films were potentiostatically deposited onto fluorine doped tin oxide (FTO) glass substrate. Effect of eosin yellow dye on structural, morphological and optical properties was studied. X-ray diffraction patterns, micro Raman spectra and photoluminescence (PL) spectra reveal hexagonal wurtzite structure with less atomic defects in 101 plane orientation of the ZnO/EY film. Scanning electron microscopy (SEM) images show flower for ZnO and porous like structure for ZnO/EY thin film, respectively. DSSC was constructed and evaluated by measuring the current density verses voltage curve.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pulsed laser deposition nickel oxide on crystalline silicon as hole selective contacts

In this work, the authors report the use of pulsed laser deposition to fabricate nickel oxide layers on silicon and assess the applicability of this structure as a hole selective contact. Films were deposited at temperatures of 300, 500, 700, and 900 °C. Results from reflective high energy electron diffraction patterns indicate increasing crystallinity with temperature up to 500 °C. However, layers deposited at 900 °C are amorphous. Nevertheless, results from atomic force microscopy, contact resistance measurements, and photoluminescence lifetime imaging indicate that films deposited at 900 °C have the best film smoothness, lowest specific contact resistivity, and highest lifetimes, and therefore, they are best suited for hole selective contact applications. Kelvin probe force microscopy and x-ray photoelectron spectroscopy were also carried out to study the effects of deposition temperature.

42 ENGINEERING↗

Ice rule for a ferromagnetic nanosite network on the face-centered cubic lattice

The magnetic properties of an inverse opal-like cobalt-based structure having the symmetry of the face-centered cubic lattice are studied. The magnetization reversal of the structure in a magnetic field applied along the [11̄0] axis is described using a phenomenological model, which uses the ice rule for the local magnetization of nanostructure elements. This description predicts the absence of a long-range magnetic order in two <111> directions that are normal to the magnetic field. The magnetic structure is analyzed by smallangle neutron diffraction. Neutron diffraction patterns are measured in an external magnetic field varying from −1.2 to 1.2 T and applied along the crystallographic [11̄0] direction. A magnetic contribution to the neutron scattering intensity is extracted. It is shown that this contribution is close to zero over the entire applied magnetic field range for all scattering planes that are normal to the field, which agrees well with the proposed model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Synthesis and structure analysis of tetragonal Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12} with the garnet-related type structure

We have successfully synthesized a high-purity polycrystalline sample of tetragonal Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12}. Single crystals have been also grown by a flux method. The single-crystal X-ray diffraction analysis verifies that tetragonal Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12} has the garnet-related type structure with a space group of I4{sub 1}/acd (no. 142). The lattice constants are a=13.134(4) A and c=12.663(8) A. The garnet-type framework structure is composed of two types of dodecahedral LaO{sub 8} and octahedral ZrO{sub 6}. Li atoms occupy three crystallographic sites in the interstices of this framework structure, where Li(1), Li(2), and Li(3) atoms are located at the tetrahedral 8a site and the distorted octahedral 16f and 32g sites, respectively. The structure is also investigated by the Rietveld method with X-ray and neutron powder diffraction data. These diffraction patterns are identified as the tetragonal Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12} structure determined from the single-crystal data. The present tetragonal Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12} sample exhibits a bulk Li-ion conductivity of sigma{sub b}=1.63x10{sup -6} S cm{sup -1} and grain-boundary Li-ion conductivity of sigma{sub gb}=5.59x10{sup -7} S cm{sup -1} at 300 K. The activation energy is estimated to be E{sub a}=0.54 eV in the temperature range of 300-560 K. - Graphical abstract: Garnet-related Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12} having tetragonal symmetry (I4{sub 1}/acd, no.142) has been successfully synthesized. Single crystals have been also grown by a flux method. The single-crystal X-ray diffraction analysis verifies that tetragonal Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12} has the garnet-related type structure with the lattice constants of a=13.134(4) A and c=12.663(8) A and the fully ordered arrangement of Li atoms.

36 MATERIALS SCIENCE↗

Structure and properties of Na{sub x}M{sub 2}SbO{sub 6}·yH{sub 2}O, M=Co(III), Ni(III) honeycomb oxyhydrates

The oxyhydrates Na{sub 0.85}Co{sub 2}SbO{sub 6}·1.7H{sub 2}O and Na{sub 0.95}Ni{sub 2}SbO{sub 6}·1.5H{sub 2}O were prepared by Br{sub 2} oxidation of Na{sub 3}Co{sub 2}SbO{sub 6} and Na{sub 3}Ni{sub 2}SbO{sub 6} and exposure to ambient air. Their composition and structure are characterized by thermogravimetric analysis, elemental analysis and powder X-ray diffraction. Both form monolayer hydrates with metal cations (Co or Ni) near the 3+ oxidation state. In the parent materials, MO{sub 6} octahedra surround SbO{sub 6} units, forming a honeycomb geometry; Rietveld refinement of the hydrate phases indicate that this motif is retained. Magnetic susceptibility plots display paramagnetic behavior and Curie–Weiss fits support the 3+ oxidation state (low spin d{sup 6}s=0 for Co and low spin d{sup 7}s=1/2 for Ni). Close inspection of the Ni hydrate’s susceptibility reveals a feature at 6.2 K and a non-linear magnetization at 2 K with no saturation up to 9 T. Heat capacity measurements show a large amount of excess entropy in the Ni hydrate in the 2–20 K temperature range, while the heat capacity of the Co hydrate can be described by a simple lattice contribution. The Ni hydrate sample is easily dehydrated by heating above 100 °C and forms a new Na-deficient phase, Na{sub 0.95}Ni{sub 2}SbO{sub 6}, which is stable at room temperature. Magnetic susceptibility of this phase is consistent with the Ni atom remaining in the 3+ oxidation state after dehydration. - Graphical abstract: Powder diffraction patterns of Na{sub 3}Ni{sub 2}SbO{sub 6}, Na{sub 0.95}Ni{sub 2}SbO{sub 6}·1.5H{sub 2}O and Na{sub 0.95}Ni{sub 2}SbO{sub 6}. Each pattern has been normalized in intensity. Cartoons depict the change in layer separation with hydration and give the approximate distances between layers and Ni atoms. Highlights: • New oxyhydrate phases with honeycomb lattices are formed. • Curie–Weiss fits indicate Ni{sup 3+} (s=1/2). • Heat capacity shows a large release of entropy for Ni phase, likely due to a complex magneto-structural phase transition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Perpendicular ferrimagnetism in strained Mn{sub 2}As film

Ferrimagnetic Mn{sub 2}As thin films with perpendicular magnetic anisotropy were successfully grown on Si(100) by molecular-beam epitaxy. From the reflection high-energy electron diffraction and X-ray diffraction patterns, the orientation of the Mn{sub 2}As film on Si was along the c-axis in the tetragonal crystal structure. Mn{sub 2}As film exhibited ferrimagnetic ordering at temperatures greater than 300 K, which differs from antiferromagnetic or paramagnetic behaviors in the bulk form. The magnetic moment of Mn{sub 2}As determined by saturated magnetization was 0.51 {mu}{sub B} per unit cell.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

On the existence of declared 9R phase in Fe–Ni invar alloy

An analysis of recently reported electron diffraction patterns suggests that metastable austenitic Fe–32Ni alloy subjected to α → γ transformation upon slow heating does not exhibit any signs of formation of the 9R phase; the conventional nanocrystalline γ phase with an fcc lattice is formed instead. Extended lamellae with a layered structure, erroneously identified as a new phase of the (3R + 9R) type in Fe–32Ni alloy, are conventional twinning (midrib) regions of each initial α crystal, in which γ-phase twin nanolamellae are formed upon heating.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Crystal structure and X-ray photoemission spectroscopic study of A{sub 2}LaMO{sub 6} [A=Ba, Ca; M=Nb, Ta]

The X-ray photoemission spectroscopic (XPS) study of the double perovskite oxides A{sub 2}LaMO{sub 6} [A=Ba, Ca; M=Nb, Ta] synthesized by the solid-state reaction technique has been carried out to investigate the nature of the chemical state of the constituent ions and the bonding between them. The Rietveld refinement of the X-ray diffraction patterns suggests the monoclinic crystal structure of all the materials at room temperature. The negative and positive chemical shifts of the core level XPS spectrum of O-1s and Nb-3d{sub 3/2}/Ta-4f{sub 5/2} respectively suggest the covalent bonding between Nb/Ta cations and O ion. The change of the bonding strength between the anion and the cations from one material to another has been analyzed. The vibrational property of the materials is investigated using the room temperature Raman spectra. A large covalency of Ta-based compound than Nb compound is confirmed from the relative shifting of the Raman modes of the materials. - Graphical abstract: Crystal structure of two perovskite oxides CLN and CLT is investigated. XPS study confirms the two different co-ordination environments of Ca and covalent bonding between B-site cations and O-ion. - Highlights: • Ordered perovskite structure obtained by Rietveld refinement of XRD patterns. • Study of nature of chemical bonding by X-ray photoemission spectroscopy. • Opposite chemical shift of d-states of Nb/Ta with respect to O. • Covalent bonding between d-states of Nb/Ta and O. • Relative Raman shifts of CLN and CLT substantiate the more covalent character of Ta than Nb.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Well-crystallized nitrogen-rich graphitic carbon nitride nanocrystallites prepared via solvothermal route at low temperature

A solvothermal method has been successfully applied to prepare crystalline carbon nitride from C{sub 3}N{sub 3}Cl{sub 3} and NaN{sub 3} in CCl{sub 4} at 180 deg. C without any catalyst. The final product was a reddish brown powder. X-ray diffraction pattern indicated that the prepared powder was well-crystallized graphitic carbon nitride. The atomic N/C ratio determined by combustion method was 1.63, indicating a high nitrogen concentration. XPS and FTIR studies showed that graphite-like sp{sup 2} bonded structure existed in the sample. Nanometer scale spherical particles and crinkly lamellas were found in the TEM morphologies.

36 MATERIALS SCIENCE↗

Critical shell thickness for InAs-Al{sub x}In{sub 1-x}As(P) core-shell nanowires

InAs nanowires with Al{sub x}In{sub 1-x}P or Al{sub x}In{sub 1-x}As shells were grown on GaAs substrates by the Au-assisted vapour-liquid-solid method in a gas source molecular beam epitaxy system. Core diameters and shell thicknesses were measured by transmission electron microscopy (TEM). These measurements were then related to selected area diffraction patterns to verify either interface coherency or relaxation through misfit dislocations. A theoretical strain model is presented to determine the critical shell thickness for given core diameters. Zincblende stiffness parameters are transformed to their wurtzite counterparts via a well known tensor transformation. An energy criterion is then given to determine the shell thickness, at which coherency is lost and dislocations become favourable. Our model only considers axial strain relieved by edge dislocations since they were the only type of dislocation observed directly by TEM.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Research on pulse electrodeposition of Fe-Ni alloy

Fe-Ni alloys were fabricated on steel substrates by means of pulse electrodeposition in sulfate solutions. The layers were electrodeposited using different peak current densities, duty cycles and frequencies. Fe contents, microhardnesses and crystalline phases were examined systematically. The Fe content in the deposit decreased and the microhardness increased with increasing duty cycle and peak current density. The pulse frequency had little effect on Fe content but led to a slight decrease in microhardness. X-ray diffraction patterns show that the crystalline phases vary with changes in peak current density and duty cycle but are barely influenced by frequency. When the peak current density or duty cycle is relatively low, crystalline Fe-Ni alloy and pure Fe phases coexist; the pure Fe phases disappear as the peak current density or duty cycle increases. At still larger peak current densities or duty cycles, crystalline Fe-Ni alloy and pure Ni phases coexist.

36 MATERIALS SCIENCE↗

Effect of gamma irradiation on dielectric properties of manganese zinc nanoferrites

Naocrystalline ferrites Mn{sub 1−x}Zn{sub x}Fe{sub 2}O{sub 4} (x = 0.00, 0.25, 0.50, 0.75 and 1.00) were prepared by combustion method. The samples were characterized by XRD technique. The dielectric measurements were carried out in the frequency range 40 Hz to 100 MHz at room temperature. All the measurements were performed before and after gamma {sup 60}Co irradiation. The X-ray diffraction patterns revealed the formation of nanocrystalline and single-phase spinel structure. The lattice parameter decrease with zinc ion concentration and increased after the irradiation due to ferric ions of smaller radius converted to ferrous ions of larger radius. The dielectric behavior is attributed to the Maxwell-Wagner type interfacial polarization. The dielctric contant, dielectric loss and AC conductivity enhanced after the irradiation.

36 MATERIALS SCIENCE↗

Influence of annealing on the optical properties of vacuum deposited silver thin films

Thin Silver films of thickness 15nm were prepared by thermal evaporation on well cleaned glass substrates at room temperature at a pressure of 2×10{sup −5} mbar with the deposition rate of 0.01À/sec and annealed in air for an hour at temperatures between 300°c and 400°c. The prepared films were characterized by X-ray diffraction (XRD), UV-visible spectroscopy and AFM. The mean grain size of the film at different annealing temperatures was determined by the X-ray diffraction pattern by using Scheer’s formula. It is found that from absorbance studies surface Plasmon peak position decreases as the annealing temperature increases and blue shifted. And also from transmittance studies the thermal effect of silver film strongly affects the optical transmittance. From AFM studies the average particle size and RMS surface roughness increase with increase of annealing temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Separate determination of the amplitude of thermal vibrations and static atomic displacements in titanium carbide by neutron diffraction

The amplitude of thermal (dynamic) atomic vibrations and meansquare static atomic displacements in titanium carbide TiC{sub x} (x = 0.97, 0.88, 0.70) have been separately determined by measuring neutron diffraction patterns at two temperatures (T{sub 1} = 300 K and T{sub 2} = 80 K). The static lattice distortions in stoichiometric titanium carbide are experimentally found to be negligible. In the TiC{sub x} homogeneity range, the amplitude {radical}u{sup 2}{sub dyn} of thermal atomic vibrations significantly increases with a decrease in the carbon concentration. The Debye temperature has been determined for the first time in the TiC{sub x} homogeneity range at both room and liquid-nitrogen temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Single-view phase retrieval of an extended sample by exploiting edge detection and sparsity

We propose a new approach to robustly retrieve the exit wave of an extended sample from its coherent diffraction pattern by exploiting sparsity of the sample's edges. This approach enables imaging of an extended sample with a single view, without ptychography. We introduce nonlinear optimization methods that promote sparsity, and we derive update rules to robustly recover the sample's exit wave. We test these methods on simulated samples by varying the sparsity of the edge-detected representation of the exit wave. Finally, our tests illustrate the strengths and limitations of the proposed method in imaging extended samples.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Investigations of γ′, γ″ and δ precipitates in heat-treated Inconel 718 alloy fabricated by selective laser melting

Highlights: • The γ austenite matrix shows a fine cellular substructure. • γ′ and three variants of γ″ precipitates around 10–50 nm develop within cellular γ. • Coarser acicular γ″ and plate-like δ occur at grain boundaries and intragranular γ. • The orientation relationships of γ″ with γ, and of δ with γ are observed. - Abstract: Inconel 718 alloy samples were fabricated by selective laser melting (SLM). Microstructure and precipitation in solution-heat-treated- and double-aging-SLM-made Inconel 718 were studied by scanning and transmission electron microscopy. Electron microscope observations showed that disc-shaped and cuboidal γ″, and circular γ′ precipitates with an average size of 10–50 nm developed within cellular γ austenite matrix. The simulated, experimentally observed electron diffraction patterns, and dark-field imaging further revealed that the precipitation of three variants of γ″ in the γ matrix occurred. The coarser acicular γ″, and globular as well as plate-like δ phases precipitated at grain boundaries and also within the interior of austenite matrix. The morphology, distribution and crystallography of these precipitates and their formation mechanisms were analyzed and discussed.

36 MATERIALS SCIENCE↗