Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffractive”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Neutron powder diffraction, and solid-state deuterium NMR analyses of Yb{sub 2}RuD{sub 6} and spectroscopic vibrational analysis of Yb{sub 2}RuD{sub 6} and Yb{sub 2}RuH{sub 6}

The crystal structure of Yb{sub 2}RuD{sub 6} has been determined by neutron powder diffraction and the results were consistent with the Fm3m (no. 225) space group, a=7.2352(18) A, with the atoms arranged according to the well-known K{sub 2}PtCl{sub 6} structure. No structural phase transition was observed in going from room temperature to 4 K. Raman spectra were not available due to fluorescence, but all fundamental bands and combination bands were assigned from FTIR and PAIR spectra only following previous studies for other alkaline earth and europium ruthenium ternary metal hydrides and deuterides. The deuterium nuclear quadrupole coupling constant, 40.9 kHz, leads to an ionic character of the Ru-D bond of 82%. - Graphical Abstract: Using PAIR (see figure above) and FTIR data spectroscopic vibrational assignments are reported for (a) Yb{sub 2}RuH{sub 6} and (b) Yb{sub 2}RuD{sub 6}. In addition, neutron powder diffraction structural elucidation data and deuterium NMR data are reported for Yb{sub 2}RuD{sub 6}. Highlights: > Yb{sub 2}RuD{sub 6} was prepared by a high temperature gas/solid phase reaction among YbD{sub 2}, Ru and D{sub 2}. > The crystal structure of Yb{sub 2}RuD{sub 6} was elucidated by powder neutron diffraction. > Yb{sub 2}RuD{sub 6} and Yb{sub 2}RuH{sub 6} were analyzed by infrared spectroscopy. > In addition, Yb{sub 2}RuD{sub 6} was analyzed with D NMR spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The ferroelectric phase of CdTiO{sub 3}: A powder neutron diffraction study

The synthesis of bulk samples of polycrystalline CdTiO{sub 3} in both the rhombohedral ilmenite and orthorhombic perovskite forms is described and the structures of these have been refined using powder neutron diffraction data. This involved the preparation of samples enriched in {sup 114}Cd. Cooling perovskite-type CdTiO{sub 3} to 4 K induces a ferroelectric phase transition, with the neutron data suggesting the low temperature structure is in Pna2{sub 1}. Mode analysis shows the polar mode to be dominant at low temperatures. The ilmenite-structure of CdTiO{sub 3} is compared with that of ZnTiO{sub 3}. The refined scattering length of the {sup 114}Cd is estimated to be 5.56 fm. Attempts to dope CdTiO{sub 3} with Ca and Sr are described. - Graphical abstract: The structure of three phases of CdTiO{sub 3} have been refined using high resolution powder neutron diffraction data. This involved the preparation of samples enriched in {sup 114}Cd. Cooling perovskite-type CdTiO{sub 3} to 4 K results in a ferroelectric phase in Pna2{sub 1}. Highlights: > Both the ilmenite and perovskite forms of CdTiO{sub 3} have been prepared using {sup 114}Cd. > Cooling the perovskite form results in a ferroelectric phase. > The structures of these are refined from powder neutron diffraction data. > Attempts to dope CdTiO{sub 3} are described.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural studies of magnesium nitride fluorides by powder neutron diffraction

Samples of ternary nitride fluorides, Mg{sub 3}NF{sub 3} and Mg{sub 2}NF have been prepared by solid state reaction of Mg{sub 3}N{sub 2} and MgF{sub 2} at 1323-1423 K and investigated by powder X-ray and powder neutron diffraction techniques. Mg{sub 3}NF{sub 3} is cubic (space group: Pm3m) and has a structure related to rock-salt MgO, but with one cation site vacant. Mg{sub 2}NF is tetragonal (space group: I4{sub 1}/amd) and has an anti-LiFeO{sub 2} related structure. Both compounds are essentially ionic and form structures in which nitride and fluoride anions are crystallographically ordered. The nitride fluorides show temperature independent paramagnetic behaviour between 5 and 300 K. - Graphical abstract: Definitive structures of the ternary magnesium nitride fluorides Mg{sub 3}NF{sub 3} and the lower temperature polymorph of Mg{sub 2}NF have been determined from powder neutron diffraction data. The nitride halides are essentially ionic and exhibit weak temperature independent paramagnetic behaviour. Highlights: Black-Right-Pointing-Pointer Definitive structures of Mg{sub 3}NF{sub 3} and Mg{sub 2}NF were determined by neutron diffraction. Black-Right-Pointing-Pointer Nitride and fluoride anions are crystallographically ordered in both structures. Black-Right-Pointing-Pointer Both compounds exhibit weak, temperature independent paramagnetic behaviour. Black-Right-Pointing-Pointer The compounds are essentially ionic with ionicity increasing with F{sup -} content.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A-site deficient perovskites in the SrO-ZrO{sub 2}-Nb{sub 2}O{sub 5} system: Composition dependent structures from neutron powder diffraction data

A series of A-site deficient perovskite-type phases was synthesised and characterised in the SrO-ZrO{sub 2}-Nb{sub 2}O{sub 5} system. The composition range was established as Sr{sub 0.70+x}Zr{sub 0.40+2x}Nb{sub 0.60-2x}O{sub 3}, {approx}0.02{<=}x{<=}0.30, and the resulting structures refined using high resolution neutron powder diffraction data. While structures in this composition range are closely related to the cubic perovskite parent, the symmetry for all investigated compositions is lowered to tetragonal or orthorhombic. For x<0.15 the resulting space group is tetragonal I4/mcm, for x>0.15 it is orthorhombic Pnma and for x=0.15 two phases co-exist, in space groups I4/mcm and Pnma. - Graphical abstract: Structured diffuse intensity indicating additional short range order in the defect perovskite Sr{sub 0.72}Zr{sub 0.44}Nb{sub 0.56}O{sub 3}. Highlights: Black-Right-Pointing-Pointer A-site deficient perovskites synthesised in Sr{sub 0.70+x}Zr{sub 0.40+2x}Nb{sub 0.60-2x}O{sub 3}, {approx}0.02 {<=}x{<=}0.30. Black-Right-Pointing-Pointer Space groups established from X-ray, electron and neutron powder diffraction. Black-Right-Pointing-Pointer Structures refined and phase transition established from neutron diffraction data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal structure of α- and β-Na{sub 2}U{sub 2}O{sub 7}: From Rietveld refinement using powder neutron diffraction data

The crystal structures of α- and β-Na{sub 2}U{sub 2}O{sub 7} have been determined from neutron powder diffraction. At 293 K, the compound α-Na{sub 2}U{sub 2}O{sub 7} has a monoclinic unit cell, space group P2{sub 1}/a, with a=12.7617(14) Å, b=7.8384(10) Å, c=6.8962(9) Å, β=111.285(9)°, and Z=4. At 773 K, β-Na{sub 2}U{sub 2}O{sub 7} is also monoclinic, space group C2/m, with a=12.933(1) Å, b=7.887(1) Å, c=6.9086(8) Å, β=110.816(10)°, and Z=4. The structures can be described by layers U{sub 2}O{sub 7}{sup 2−} built from corner linked deformed UO{sub 6} octahedra with pentagonal UO{sub 7} bipyramids in between linked with common edges to each other and to the octahedra. The Na atoms occupy the interlayer space. The Na{sub 2}U{sub 2}O{sub 7} layers are similar as in K{sub 2}U{sub 2}O{sub 7}, but with a different stacking sequence of the layers. The layers in β-Na{sub 2}U{sub 2}O{sub 7} are more symmetric. The relationship with the compounds A{sub 2}U{sub 2}O{sub 7} (A=K, Rb, and Cs) is discussed. - Graphical abstract: The U{sub 2}O{sub 7} layer of α-Na{sub 2}U{sub 2}O{sub 7} (left) at 293 K and of β-Na{sub 2}U{sub 2}O{sub 7} (right) at 773 K determined by neutron diffraction. Some Na atoms between the layers are visible. - Highlights: • Na{sub 2}U{sub 2}O{sub 7} has been prepared by means of a solid state reaction. • The structure has been determined using neutron diffraction. • At 293 K, the compound adopts a monoclinic structure with space group P2{sub 1}/a. • The structure at 773 K is closely related, and is described in the space group C2/m.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The magnetic and neutron diffraction studies of La{sub 1−x}Sr{sub x}MnO{sub 3} nanoparticles prepared via molten salt synthesis

Series of single-phase La{sub 1−x}Sr{sub x}MnO{sub 3} nanoparticles (x=0.25−0.47) with the size of about 50 nm was prepared in molten NaNO{sub 2}. TEM evidenced well dispersed particles that are not interconnected by sintering bridges in contrast to traditional products. Interestingly, some reduction of the perovskite cell volume, particularly at higher Sr-contents, was detected by XRD. Moreover, reduced magnetization and decreased Curie temperature in comparison to sol–gel samples were observed. Neutron diffraction analysis of the as-prepared nanoparticles and several comparative samples with x=0.37 indicated that the anomalous behavior of studied particles probably originate in the overdoped outer shell. The overdoping might result from both the surface oxygen chemisorption and from an increased Sr concentration in the shell. By all means, the overdoping would lead to compressive surface stress, driving the x=0.37 ground state toward a mixture of FM and A-type AFM ordering as observed by neutron diffraction. - Graphical abstract: La{sub 1−x}Sr{sub x}MnO{sub 3} nanoparticles with the size of about 50 nm were prepared by newly established method in molten NaNO{sub 2}. TEM proved the formation of well-separated particles without sintering bridges, the major advantage over traditional preparation methods. - Highlights: • Series of La{sub 1−x}Sr{sub x}MnO{sub 3} nanoparticles was prepared by novel method in NaNO{sub 2} melt. • Lower magnetization and Curie temperature in comparison to sol–gel nanoparticles was observed. • Overdoping of outer shell was indicated by neutron diffraction and cerimetric titration. • Overdoping shifts La{sub 0.37}Sr{sub 0.63}MnO{sub 3} ground state to a mixture of FM and A-type AFM ordering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure of Se-Te glasses studied using neutron, X-ray diffraction and reverse Monte Carlo modelling

Pulsed neutron diffraction and synchrotron X-ray diffraction measurements were performed on Se{sub 100-x}Te{sub x} bulk glasses with x=10, 20, 30 and 40. The coordination numbers obtained from the diffraction results demonstrate that Se and Te atoms are twofold coordinated and the glass structure is formed by the chain network. The three-dimensional structure model for Se{sub 60}Te{sub 40} glass obtained by using reverse Monte Carlo modelling shows that the alternating arrangements of Se and Te atoms compose the major part of the chain clusters but several other fragments such as Se{sub n} chains and Te-Te dimers are also present in large numbers. The chain clusters have geometrically disordered forms and the interchain atomic order is different from those in the crystal structures of trigonal Se and trigonal Te. - Graphical abstract: Coordination environment in Se{sub 60}Te{sub 40} glass.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comparative determination of the {alpha}/{beta} phase fraction in {alpha}+{beta}-titanium alloys using X-ray diffraction and electron microscopy

A comparison is made between the measured {alpha}/{beta} phase fractions in Ti-6246 using X-ray diffraction (XRD) and electron microscopy. Image analysis of SEM and TEM images was compared to the phase fraction estimate obtained using electron backscattered diffraction, lab and high-energy synchrotron XRD. There was a good agreement between the electron microscopic and diffraction techniques, provided that the microstructural parameters of grain size and texture are estimated correctly when using quantitative Rietveld refinement.

36 MATERIALS SCIENCE↗

Neutron and X-ray powder diffraction study of skutterudite thermoelectrics

N- and p-type filled-skutterudite materials prepared for thermoelectric power generation modules were analyzed by neutron diffraction at the POWGEN beam line of the Spallation Neutron Source (SNS) and X-ray diffraction (XRD). The skutterudite powders were processed by melt spinning, followed by ball milling and annealing. The n-type material consists of Ba–Yb–Co–Sb and the p-type material consists of Di–Fe–Ni–Sb or Di–Fe–Co–Sb (Di = didymium, an alloy of Pr and Nd). Powders for prototype module fabrication from General Motors and Marlow Industries were analyzed in this study. XRD and neutron diffraction studies confirm that both the n- and p-type materials have cubic symmetry. Structural Rietveld refinements determined the lattice parameters and atomic parameters of the framework and filler atoms. The cage filling fraction was found to depend linearly on the lattice parameter, which in turn depends on the average framework atom size. Ultimately, this knowledge may allow the filling fraction of these skutterudite materials to be purposefully adjusted, thereby tuning the thermoelectric properties.

36 MATERIALS SCIENCE↗

Quantitative phase analysis of challenging samples using neutron powder diffraction. Sample #4 from the CPD QPA round robin revisited

Here, quantitative phase analysis (QPA) using neutron powder diffraction more often than not involves non-ambient studies where no sample preparation is possible. The larger samples and penetration of neutrons versus X-rays makes neutron diffraction less susceptible to inhomogeneity and large grain sizes, but most well-characterized QPA standard samples do not have these characteristics. Sample #4 from the International Union of Crystallography Commission on Powder Diffraction QPA round robin was one such sample. Data were collected using the POWGEN time-of-flight (TOF) neutron powder diffractometer and analysed together with historical data from the C2 diffractometer at Chalk River. The presence of magnetic reflections from Fe 3 O 4 (magnetite) in the sample was an additional consideration, and given the frequency at which iron-containing and other magnetic compounds are present during in-operando studies their possible impact on the accuracy of QPA is of interest. Additionally, scattering from thermal diffuse scattering in the high- Q region (<0.6 Å) accessible with TOF data could impact QPA results during least-squares because of the extreme peak overlaps present in this region. Refinement of POWGEN data was largely insensitive to the modification of longer d -spacing reflections by magnetic contributions, but the constant-wavelength data were adversely impacted if the magnetic structure was not included. A robust refinement weighting was found to be effective in reducing quantification errors using the constant-wavelength neutron data both where intensities from magnetic reflections were ignored and included. Results from the TOF data were very sensitive to inadequate modelling of the high- Q (low d -spacing) background using simple polynomials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In Situ X-ray Diffraction Study of Cesium Exchange in Synthetic Umbite

The exchange of Cs{sup +} into H{sub 1.22}K{sub 0.84}ZrSi{sub 3}O{sub 9} {center_dot} 2.16H{sub 2}O (umbite-(HK)) was followed in situ using time-resolved X-ray diffraction at the National Synchrotron Light Source. The umbite framework (space group P2{sub 1}/c with cell dimensions of a = 7.2814(3) {angstrom}, b = 10.4201(4) {angstrom}, c = 13.4529(7) {angstrom}, and {beta} = 90.53(1){sup o}) consists of wollastonite-like silicate chains linked by isolated zirconia octahedra. Within umbite-(HK) there are two unique ion exchange sites in the tunnels running parallel to the a-axis. Exchange Site 1 is marked by 8 member-ring (MR) windows in the bc-plane and contains K{sup +} cations. Exchange Site 2 is marked by a larger 8-MR channel parallel to [100], and contains H{sub 2}O molecules. The occupancy of the Cs{sup +} cations through these channels was modeled by Rietveld structure refinements of the diffraction data and demonstrated that there is a two-step exchange process. The incoming Cs{sup +} ions populated the larger 8-MR channel (Exchange Site 2) first and then migrated into the smaller 8-MR channel. During the exchange process a structural change occurs, transforming the exchanger from monoclinic P2{sub 1}/c to orthorhombic P2{sub 1}2{sub 1}2{sub 1}. This structural change occurs when Cs{sup +} occupancy in the small cavity becomes greater than 0.50. The final in situ ion exchange diffraction pattern was refined to yield umbite-(CsK) with the molecular formula H{sub 0.18}K{sub 0.45}Cs{sub 1.37}ZrSi{sub 3}O{sub 9} {center_dot} 0.98H{sub 2}O and possessing an orthorhombic unit cell with dimensions a = 10.6668(8) {angstrom}, b = 13.5821(11) {angstrom}, c = 7.3946(6) {angstrom}. Solid state {sup 133}Cs MAS NMR showed there is only a slight difference between the two cavities electronically. Valence bond sums for the completely occupied Exchange Site 1 demonstrate that Cs-O bonds of up to 3.8 {angstrom} contribute to the coordination of the Cs{sup +} cation.

43 PARTICLE ACCELERATORS↗

Phase-type quantum-dot-array diffraction grating

A novel phase-type quantum-dot-array diffraction grating (QDADG) is reported. In contrast to an earlier amplitude-type QDADG [C. Wang et al., Rev. Sci. Instrum. 78, 053503 (2007)], the new phase-type QDADG would remove the zeroth order diffraction at some certain wavelength, as well as suppressing the higher-order diffractions. In this paper, the basic concept, the fabrication, the calibration techniques, and the calibration results are presented. Such a grating can be applied in the research fields of beam splitting, laser probe diagnostics, and so on.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Diffractive imaging using a polychromatic high-harmonic generation soft-x-ray source

A new approach to diffractive imaging using polychromatic diffraction data is described. The method is tested using simulated and experimental data and is shown to yield high-quality reconstructions. Diffraction data produced using a high-harmonic generation source are considered explicitly here. The formalism can be readily adapted, however, to any short-wavelength source producing a discrete spectrum and possessing sufficient spatial coherence.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Strength and elastic moduli of TiN from radial x-ray diffraction under nonhydrostatic compression up to 45 GPa

The high pressure behavior of titanium nitride (TiN) was investigated using synchrotron radial x-ray diffraction (RXRD) under nonhydrostatic compression up to 45.4 GPa in a diamond-anvil cell. We obtained the hydrostatic compression equation of state of TiN. Fitting to the third-order Birch-Murnaghan equation of state, the bulk modulus derived from nonhydrostatic compression data varies from 232 to 353 GPa, depending on angle {Psi}, the orientation of the diffraction planes with respect to the loading axis. The RXRD data obtained at {Psi} = 54.7{sup o} yield a bulk modulus K{sub 0} = 282 {+-} 9 GPa with pressure derivative K{prime}{sub 0} fixed at 4. We have analyzed the deformation mechanisms by analyzing the (111), (200), (220), (311), and (222) peaks in the x-ray diffraction under pressures. The ratio of uniaxial stress component to shear modulus t/G ranges from 0.007-0.027 at the pressure of 6.4-45.4 GPa. It was found that the TiN sample could support a maximum uniaxial stress component t of 8.6 GPa, when it started to yield at 45.4 GPa under uniaxial compression. And the aggregate elastic moduli of TiN at high pressure were determined from the synchrotron RXRD measurements.

43 PARTICLE ACCELERATORS↗

A Quantitative Analysis of Room Temperature Recrystallization Kinetics in Electroplated Copper Films using High Resolution X-ray Diffraction

Time-resolved in situ x-ray diffraction measurements were used to study the room-temperature recrystallization kinetics of electroplated copper thin films with thicknesses between 400 and 1000 nm. The thinnest films exhibited limited recrystallization and subsequent growth of grains, while recrystallized grains in the thicker films grew until all as-plated microstructure was consumed. For all films, recrystallized grains that belonged to the majority texture component, <111>, started growing after the shortest incubation time. These grains exhibited volumetric growth until they achieved the film thickness. After this point the growth mode became planar, with the <111>-type grains growing in the plane of the film. Grains with the <111> direction normal to the film surface started growing after the <111>-type grains switched to planar growth. However, the planar growth of this texture component finished at the same time as the growth of the <111> grains. Profile fitting of the 111 peak permitted the separation of the diffraction signals from recrystallized and as-plated grain populations. The average strains in these two populations, calculated from the peak position of the corresponding {l_brace}111{r_brace} reflections, were different, indicating a heterogeneous stress state within this texture component. The increasing volume fraction of recrystallized <111> grains with time was monitored via the variation in the diffracted intensity. This variation could be represented by the Johnson-Mehl-Avrami-Kolmogorov model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Strain Determination Using Electron Backscatter Diffraction

In the present paper we demonstrate the use of electron backscatter diffraction (EBSD) for high resolution elastic strain determination. Here, we focus on analysis methods based on determination of small shifts in EBSD pattern with respect to a reference pattern using cross-correlation algorithms. Additionally we highlight the excellent spatial and depth resolution of EBSD and introduce the use of simulated diffraction patterns based on dynamical diffraction theory for sensitivity estimation. Moreover the potential of EBSD for strain analysis of strained thin films with particular emphasis on appropriate target preparation which respect to occurring lattice defects is demonstrated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

In situ analysis of elemental depth distributions in thin films by combined evaluation of synchrotron x-ray fluorescence and diffraction

In this work we present a method for the in situ analysis of elemental depth distributions in thin films using a combined evaluation of synchrotron x-ray fluorescence and energy-dispersive x-ray diffraction signals. We recorded diffraction and fluorescence signals simultaneously during the reactive annealing of thin films. By means of the observed diffraction signals, the time evolution of phases in the thin films during the annealing processes can be determined. We utilized this phase information to parameterize the depth distributions of the elements in the films. The time-dependent fluorescence signals were then taken to determine the parameters representing the parameterized depth distributions. For this latter step, we numerically calculated the fluorescence intensities for a given set of depth distributions. These calculations handle polychromatic excitation and arbitrary functions of depth distributions and take into account primary and secondary fluorescence. Influences of lateral non-uniformities of the films, as well as the accuracy limits of the method, are investigated. We apply the introduced method to analyze the evolution of elemental depth distributions and to quantify the kinetic parameters during a synthesis process of CuInS{sub 2} thin films via the reactive annealing of Cu-In precursors in a sulfur atmosphere.

36 MATERIALS SCIENCE↗

Development of Coherent X-ray Diffraction Apparatus with Kirkpatrick-Baez Mirror Optics

To realize coherent x-ray diffraction microscopy with higher spatial resolution, it is necessary to increase the density of x-ray photons illuminated onto the sample. In this study, we developed a coherent x-ray diffraction apparatus with Kirkpatrick-Baez mirror optics. By using mirrors fabricated by elastic emission machining, a high-density coherent x-ray beam was produced. In a demonstration experiment using a silver nanocube as a sample, a high-contrast coherent x-ray diffraction pattern was observed over a wide-q range. This proves that both the density and the degree of coherence of the focused beam were high.

07 ISOTOPE AND RADIATION SOURCES↗