Search NASA⌕ Search

SEARCH · Search NASA

Results for “EVAPORATION MODEL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Structure of a swirl-stabilized spray flame by imaging, laser Doppler velocimetry, and phase Doppler anemometry

Data are presented which describe the mean structure of a steady, swirl-stabilized, kerosene spray flame in the near-injector region of a research furnace. The data presented include ensemble-averaged results of schlieren, luminosity, and extinction imaging, measurement of the gas phase velocity field by laser Doppler velocimetry, and characterization of the condensed phase velocity by phase Doppler anemometry. The results of these studies define six key regions in the flame: the dense spray region; the rich, two-phase, fuel jet; the main air jet; the internal product recirculation zone; the external product recirculation zone; and the gaseous diffusion flame zone. The first five of these regions form a conical mixing layer which prepares the air and fuel for combustion. The air and fuel jets comprise the central portion of this mixing layer and are bounded on either side by the hot product gases of the internal and external recirculation zones. Entrainment of these product gases into the air/fuel streams provides the energy required to evaporate the fuel spray and initiate combustion. Intermittency of the internal recirculation and spray jet flows accounts for unexpected behavior observed in the aerodynamics of the two phases. The data reported herein are part of the database being accumulated on this spray flame for the purpose of detailed comparison with numerical modeling.

Edwards, C. F.↗

The tropical water and energy cycles in a cumulus ensemble model. Part 1: Equilibrium climate

A cumulus ensemble model is used to study the tropical water and energy cycles and their role in the climate system. The model includes cloud dynamics, radiative processes, and microphysics that incorporate all important production and conversion processes among water vapor and five species of hydrometeors. Radiative transfer in clouds is parameterized based on cloud contents and size distributions of each bulk hydrometeor. Several model integrations have been carried out under a variety of imposed boundary and large-scale conditions. In Part 1 of this paper, the primary focus is on the water and heat budgets of the control experiment, which is designed to simulate the convective - radiative equilibrium response of the model to an imposed vertical velocity and a fixed sea surface temperature at 28 C. The simulated atmosphere is conditionally unstable below the freezing level and close to neutral above the freezing level. The equilibrium water budget shows that the total moisture source, M(sub s), which is contributed by surface evaporation (0.24 M(sub s)) and the large-scale advection (0.76 M(sub s)), all converts to mean surface precipitation bar-P(sub s). Most of M(sub s) is transported verticaly in convective regions where much of the condensate is generated and falls to surface (0.68 bar-P(sub s)). The remaining condensate detrains at a rate of 0.48 bar-P(sub s) and constitutes 65% of the source for stratiform clouds above the melting level. The upper-level stratiform cloud dissipates into clear environment at a rate of 0.14 bar-P(sub s), which is a significant moisture source comparable to the detrained water vapor (0.15 bar-P(sub s)) to the upper troposphere from convective clouds. In the lower troposphere, stratiform clouds evaporate at a rate of 0.41 bar-P(sub s), which is a more dominant moisture source than surface evaporation (0.22 bar-P(sub s)). The precipitation falling to the surface in the stratiform region is about 0.32 bar-P(sub s). The associated latent heating in the water cycle is the dominant source in the heat budget that generates a net upward motion in convective regions, upper stratiform regions (above the freezing level), and a downward motion in the lower stratiform regions. The budgets reveal a cycle of water and energy resulted from radiation-dynamic-convection interactions that maintain equilibrium of the atmosphere.

Sui, C. H.↗

Advanced thermal energy management: A thermal test bed and heat pipe simulation

Work initiated on a common-module thermal test simulation was continued, and a second project on heat pipe simulation was begun. The test bed, constructed from surplus Skylab equipment, was modeled and solved for various thermal load and flow conditions. Low thermal load caused the radiator fluid, Coolanol 25, to thicken due to its temperature avoided by using a regenerator-heat-exchanger. Other possible solutions modeled include a radiator heater and shunting heat from the central thermal bus to the radiator. Also, module air temperature can become excessive with high avionics load. A second preoject concerning advanced heat pipe concepts was initiated. A program was written which calculates fluid physical properties, liquid and vapor pressure in the evaporator and condenser, fluid flow rates, and thermal flux. The program is directed to evaluating newer heat pipe wicks and geometries, especially water in an artery surrounded by six vapor channels. Effects of temperature, groove and slot dimensions, and wick properties are reported.

Barile, Ronald G.↗

The accretion of interplanetary dust by Ap and Am stars

Accretion of interplanetary dust and comets by A-type stars is investigated to see whether this process can explain the overabundances of heavy elements in Ap and Am stars. The dust particles spiral in by the Poynting-Robertson effect and evaporate above the star. This process is evaluated by considering the evolution of silicate and graphite particles in the radiation field of Alpha Leo (B7 V). It is found that graphite particles evaporate above 20 stellar radii and silicate dust grains above 50 stellar radii. The evaporated atoms will be quickly ionized. In the case of Am stars the ions will wander off and not reach the photosphere, but in the case of Ap stars they can be trapped by the magnetic field of the star and reach the surface. The magnetosphere of a typical Ap star is modeled, and the fate of the ions is studied. The efficiency of accretion from the magnetosphere is sensitive to the presence of any plasma in the magnetosphere. The comet impact process is found capable of producing the abundance anomalies in Ap as well as Am stars, assuming that the comet impact rate is 0.03/yr, nearly the same as in the solar system.

Kumar, C. Krishna↗

Free convection in the Matian atmosphere

The 'free convective' regime for the Martian atmospheric boundary layer (ABL) was investigated. This state occurs when the mean windspeed at the top of the ABL drops below some critical value U(sub c) and positive buoyant forces are present. Such forces can arise either from vertical temperature or water vapor gradients across the atmospheric surface layer. During free convection, buoyant forces drive narrow plumes that ascend to the inversion height with a return circulation consisting of broad slower-moving downdraughts. Horizontal pressure, temperature, windspeed, and water vapor fluctuations resulting form this circulation pattern can be quite large adjacent to the ground (within the surface layer). The local turbulent fluctuations cause non-zero mean surface stresses, sensible heat fluxes, and latent heat fluxes, even when the mean regional windspeed is zero. Although motions above the surface layer are insensitive to the nature of the surface, the sensible and latent heat fluxes are primarily controlled by processes within the interfacial sublayer immediately adjacent to the ground during free convection. Thus the distinction between aerodynamically smooth and rough airflow within the interfacial sublayer is more important than for the more typical situation where the mean regional windspeed is greater than U(sub c). Buoyant forces associated with water vapor gradients are particularly large on Mars at low pressures and high temperatures when the surface relative humidity is 100 percent, enhancing the likelihood of free convection under these conditions. On this basis, Ingersol postulated the evaporative heat losses from an icy surface on Mars at 237 K and current pressures would exceed the available net radiative flux at the surface, thus prohibiting ice from melting at low atmospheric pressures. Schumann has developed equations describing the horizontal fluctuations and mean vertical gradients occurring during free convection. Schumann's model was generalized to include convection driven by water vapor gradients and to include the effects of circulation above both aerodynamically smooth and rough surfaces.

Clow, G. D.↗

Laboratory simulation of the surface of Halley's Comet

In the past year we have developed a model for the dissociation of icy grains in comets. In general, this model does not predict the radical yield that is observed in the jets of comets. To reproduce these yields, the concentration of the radical's precursors will have to be too high to be consistent with the abundance that we expect in comets. We have also constructed a theoretical model for the formation of ions on icy cometary grains. That model shows that only a small number of the cometary ions could be produced as ions in icy grains if the particle has only positively charged ions. If it contains both positive and negative ions then it could have a higher concentration of ions without violating charge neutrality. When such a particle evaporates, it can release ions with both charges into the gas phase. These ions could produce radicals via dissociative recombination with electrons if they are positive ions or by photoattachment of electrons if they are negative electrons. Finally, an avalanche process involving the acceleration of electrons towards charged particles is evaluated. It is shown that this will not lead directly to gas phase ions, but it might lead to additional ionization and dissociation on the grain.

Jackson, William M.↗

Soil moisture verification study of the ESTAR microwave radiometer - Walnut Gulch, AZ 1991

The application of an electronically steered thinned array L-band radiometer (ESTAR) for soil moisture mapping is investigated over the arid rangeland Walnut Gulch Watershed. Antecedent rainfall and evaporation for the flights are very different and result in a wide range of soil moisture conditions. The high spatial variability of rainfall events within this region results in moisture conditions with dramatic spatial patterns. Sensor performance is verified using two approaches. Microwave data are used in conjunction with a microwave emission model to predict soil moisture. These predictions are compared to ground observations of soil moisture. A second verification is possible using an extensive data set. Both tests showed that the ESTAR is capable of providing soil moisture with the same level of accuracy as existing systems.

Jackson, T. J.↗

GCM Studies on the Interactions Between Photosynthesis and Climate at Diurnal to Decadal Time Scales

Transpiration, a major component of total evaporation from vegetated surfaces, is an unavoidable consequence of photosynthetic carbon fixation. Because of limiting soil moisture and competition for solar radiation plants invest most of their fixed carbon into structural and hydraulic functions (roots and stems) and solar radiation absorption (leaves). These investments permit individuals to overshadow competitors and provide for transport of water from the soil to the leaves where photosynthesis and transpiration occur. Often low soil moisture or high evaporative demand limit the supply of water to leaves reducing photosynthesis and thus transpiration. The absorption of solar radiation for photosynthesis and dissipation of this energy via radiation, heat, mass and momentum fluxes represents the link between photosynthesis and climate. Recognition of these relationships has led to the development of hydro/energy balance models that are based on the physiological ecology of photosynthesis. We discuss an approach to study vegetation-climate interactions using photosynthesis-centric models embedded in a GCM. The rate at which a vegetated area transpires and photosynthesizes is determined by the physiological state of the vegetation, its amount and its type. The latter two are specified from global satellite data collected since 1982. Climate simulations have been carried out to study how this simulated climate system responds to changes in radiative forcing, physiological capacity, atmospheric CO2, vegetation type and variable vegetation cover observed from satellites during the 1980's. Results from these studies reveal significant feedbacks between the vegetation activity and climate. For example, vegetation cover and physiological activity increases cause the total latent heat flux and precipitation to increase while mean and maximum air temperatures decrease. The reverse occurs if cover or activity'decreases. In general climate response of a particular region was dominated by local processes but we also find evidence that plausible climate-vegetation scenarios lead to changes in global atmospheric circulation and strong non-local influences in some cases.

Collatz, G. James↗

BOREAS HYD-8 1994 Gravimetric Moss Moisture Data

The Boreal Ecosystem-Atmosphere Study (BOREAS) Hydrology (HYD)-8 team made measurements of surface hydrological processes that were collected at the Northern Study Area-Old Black Spruce (NSA-OBS) Tower Flux site in 1994 and at Joey Lake, Manitoba, to support its research into point hydrological processes and the spatial variation of these processes. The data collected may be useful in characterizing canopy interception, drip, throughfall, moss interception, drainage, evaporation, and capacity during the growing season at daily temporal resolution. This particular data set contains the gravimetric moss moisture measurements from June to September 1994. A nested spatial sampling plan was implemented to support research into spatial variations of the measured hydrological processes and ultimately the impact of these variations on modeled carbon and water budgets. These data are stored in tabular ASCII files. The HYD-08 1994 gravimetric moss moisture data are available from the Earth Observing System Data and Information System (EOSDIS) Oak Ridge National Laboratory (ORNL) Distributed Active Archive Center (DAAC). The data files are available on a CD-ROM (see document number 20010000884).

Wang, Xuewen↗

Lunar and Planetary Science XXXV: Mars Polar Science and Exploration

The session, "Mars Polar Science and Exploration" included the following reports: Evidence for Possible Exposed Water Ice Deposits in Martian Low Latitude Chasms and Chaos; Stability and Exchange of Subsurface Ice on Mars; Evaporation Rates for Liquid Water and Ice Under Current Martian Conditions; Seasonal Cycle of Carbon Dioxide and Atmospheric Circulation in Mars Southern Hemisphere as Observed by Neutron Spectroscopy; Imaging Polarimetry of Mars with Hubble Space Telescope in 2003 Opposition; GCM Simulations of Tropical Ice Accumulations: Implications for Cold-based Glaciers; Numerical Modeling of Glaciers in Martian Paleoclimates; Valley Glaciers on Mars: Calculation of Flow Rate and Thickness; Internal Structure of the Southern Polar Cap of Mars and Formation Implications; Sublimation at the Base of a Seasonal CO2 Slab on Mars; Impact Crater Abundance of the Martian South Polar Layered Deposits from THEMIS Visible Imaging; Recent Changes in South-Polar-Polygonal Terrain During One Martian Year: Implications for Subsurface Ice-Wedges; and An Historical Search for Unfrozen Water at the Phoenix Landing Site.

Source record↗

Zero-Boil-Off Tank (ZBOT) Experiment: Ground-Based Validation of Self-Pressurization and Pressure Control Two-Phase CFD Model

Integral to all phases of NASA's projected space and planetary expeditions is affordable and reliable cryogenic fluid storage for use in propellant or life support systems. Cryogen vaporization due to heat leaks into the tank from its surroundings and support structure can cause self-pressurization relieved through venting. This has led to a desire to develop innovative pressure control designs based on mixing of the bulk tank fluid together with some form of active or passive cooling to allow storage of the cryogenic fluid with zero or reduced boil-off. The Zero-Boil-Off Tank (ZBOT) Experiments are a series of small scale tank pressurization and pressure control experiments aboard the International Space Station (ISS) that use a transparent volatile simulant fluid in a transparent sealed tank to delineate various fundamental fluid flow, heat and mass transport, and phase change phenomena that control storage tank pressurization and pressure control in microgravity. The hardware for ZBOT-1 flew to ISS on the OA-7 flight in April 2017 and operations are planned to begin in September 2017, encompassing more than 90 tests. This paper presents preliminary results from ZBOT's ground-based research delineating both pressurization and pressure reduction trends in the sealed test tank. Tank self-pressurization tests are conducted under three modes: VJ heating, strip heating and simultaneous VJ and strip heating in attempt to simulate heat leaks from the environment, the support structure and both. The jet mixing pressure control studies are performed either from an elevated uniform temperature condition or from thermally stratified conditions following a self-pressurization run. Jet flow rates are varied from 2-25 cm/s spanning a range of jet Re number in laminar, transitional, and turbulent regimes and a range of Weber numbers covering no ullage penetration, partial penetration and complete ullage penetration and break-up (only in microgravity). Numerical prediction of a two-phase CFD model are compared to experimental 1g results to both validate the model and also indicate the effect of the residual non-condensable gas on evolution of pressure and temperature distributions in the tank during pressurization and pressure control.

microgravity evaporation condensatio↗

Towards an Enhanced Droplet Activation Scheme for Multi-Moment Bulk Microphysics Schemes

Initial droplet spectra produced upon activation impact the ensuing chain of microphysical processes andtherefore play a crucial role in cloud evolution. This work re-examines dependencies of newly formed clouddroplet size distribution (CDSD) characteristics on environmental and aerosol properties via parcel model simulationsthat serve as the basis for a multi-moment bulk microphysics droplet activation scheme suitable for acloud-resolving model (CRM). It is found that applying a fixed size threshold to define activated droplets versusemploying physical considerations can lead to erroneous activation and overly broad CDSDs for high aerosolconcentration and weak updraft conditions. Aerosol distributions characterized by larger median sizes and/orincreased solubility can result in greater activated droplet numbers, whereas impacts of these parameters onCDSD spectral width depend on both aerosol number concentration and updraft velocity. An expansion of theactivation scheme to include CDSD spectral width is proposed to aid efforts to extend high-order momentprediction to cloud droplet categories in CRMs as well as better represent variability in the activation process onthe cloud scale.simulations to investigate the regime dependence of the relative dispersion(d)1 of newly activated CDSDs, where d is the ratio of dropletradius standard deviation (σ) to the mean radius (r ). C16 demonstratedthat increasing Na resulted in increasing (decreasing) d values via reducedcondensational narrowing (spectral broadening) rates within theAL (UL) regime, with d values peaking in the TR regime. Their findingssuggest a similar regime dependence for d as R09 noted for Nc and helpexplain reportedly conflicting relationships between Na and CDSDspectral characteristics (cf. Hudson and Noble, 2014; Liu et al., 2014),although the applicability of these results within bulk microphysicalschemes was not addressed.Simulating aerosol-cloud interactions with CRMs employing bulkmicrophysics requires that the scheme minimally predict two CDSDparameters, namely mass and number concentrations, and represent thedroplet activation process. Various activation schemes aim to determineNc from aerosol and environmental properties and include analyticalexpressions (e.g., Abdul-Razzak et al., 1998; Morrison et al., 2005) aswell as lookup tables (LUTs) based on detailed parcel model calculations(e.g., Saleeby and Cotton, 2004, hereafter SC04; Segal and Khain,2006; Thompson and Eidhammer, 2014). Expressions to diagnose CDSDspectral width from Nc (Grabowski, 1998; Liu et al., 2006; Morrison andGrabowski, 2007) or cloud water content (Geoffroy et al., 2010) havealso been developed, although more robust methods to obtain CDSDspectral width upon activation are presently lacking. This latter point isrelevant for triple-moment (3 M) bulk microphysics that aim to predictdistribution spectral width alongside number and mass concentrations(e.g., Loftus et al., 2014; Milbrandt and Yau, 2005).The current work extends the findings of C16 to the current LUTbasedaerosol activation scheme used in the Regional AtmosphericModeling System (RAMS) (Cotton et al., 2003; SC04; Saleeby and vanden Heever, 2013, hereafter SvdH13) and additionally examinesaerosol size and solubility impacts on newly activated CDSD properties.Because early cloud development processes such as condensationalgrowth, evaporation, and droplet self-collection depend on and impactCDSD spectral width (Hudson and Yum, 1997; Seifert and Beheng 2001;Lu and Seinfeld, 2006; Igel and van den Heever, 2017), an expansion ofthe activation LUTs to include CDSD spectral width is proposed as apreliminary step for extending 3M prediction to CDSDs in CRMs forimproved simulations of aerosol-cloud interactions.2. MethodologyThe current RAMS two-moment microphysics module determinesthe fractional number of aerosol particles that activate to cloud dropletsfrom five-dimensional LUTs based on model predicted air temperature(T), w, Na, and the geometric median radius (rg) and soluble fraction (ε)of the aerosol size distribution (SvdH13). These LUTs are created offlineusing a one-dimensional Lagrangian adiabatic parcel model (Feingoldand Heymsfield, 1992; Heymsfield and Sabin, 1989; SC04) to simulateexplicit droplet activation and initial CDSD growth for a range of ambientatmospheric conditions [T, w] and binned lognormal aerosol sizedistributions given by= ⎡⎣ ⎢− ⎤⎦ ⎥N r Nr π σr rσ( )2 lnexp[ln( / )]2(ln )aggg22 (1)where r is the dry aerosol particle bin radius and σg is the geometricstandard deviation of the distribution. As the parcel model simulationsfocus on the activation process, other processes such as coalescence,sedimentation, and mixing are not considered. Details of the parcelmodel can be found in SC04 and SvdH13, and only a brief description isprovided here. At the onset of parcel model calculations, the initiallydry aerosol particles in all bins first deliquesce and reach theirequilibrium diameters in a sub-saturated environment based on theKöhler equation for solution droplets. The parcel is then lifted at a fixedupward velocity w, and particle growth by vapor diffusion, along withconcurrent changes in the ambient environment, are iteratively computedusing the Variable-coefficient Ordinary Differential Equation(VODE) solver (Brown et al., 1989). The time resolution of these calculationsis determined within the VODE solver, and the frequency atwhich the solver is called is controlled by a longer model time stepbased on fixed upward parcel displacement increments (Δz) at thespecified w (Δt=Δz/w). Model calculations proceed until the parcelreaches a height 50m beyond the level of maximum saturation ratio(Smax) or total parcel displacement exceeds 2 km. Upon model termination,Smax and the fractional number of aerosols (factv) resulting innewly formed cloud droplets, defined as particles having diameters of atleast 2 μm, are cataloged in the LUTs according to the specified T, w, Na,rg, and ε parameter values.A critical point regarding the creation of these LUTs is the use of afixed minimum diameter (Dmin) to define cloud droplets in the parcelmodel, which can produce erroneous CDSD characteristics, particularlywithin the UL regime. For aerosol distributions with large rg valuesunder low SS conditions, for example, deliquesced aerosols within thelarge tail of the distribution can exceed 2 μm in diameter yet remainunactivated as ‘haze’ particles (Levin and Cotton, 2009; McFigganset al., 2006). For this study, aerosol particles activate to cloud dropletsbased on the critical diameter Dcrit as a function of parcel supersaturationratio (Sr) as in R09:D = σ MS RTρ83 ln( ) critsol wr w (2)where σsol is the surface tension of a solution droplet, Mw and ρw are themolar mass and density of liquid water, respectively, and R is theuniversal gas constant. Additionally, at relatively large w values withinthe AL regime, Nc stabilizes shortly after reaching supersaturation.However, parcel ascent and condensational growth continue beyondthe level of Smax, potentially causing additional narrowing of the CDSD.In the current work, model calculations terminate upon reaching Smaxas changes in Nc are negligible with continued ascent (Peng et al., 2007;R09).Parcel model simulations are performed to examine the sensitivitiesof CDSD characteristics to w, Na, rg, and ε, with the ranges for theseparameters listed in Table 1. Aerosols are assumed to be a mix of solubleand insoluble material of equal density, specified by ε, where fullysoluble aerosols correspond to ammonium sulfate with hygroscopicityparameter κ=0.61 (Petters and Kreidenweis, 2007). FollowingSvdH13, aerosol geometric standard deviation is fixed at σg=1.8, andaerosol distributions (Eq. 1) are partitioned into 100 logarithmicallyspacedbins spanning a size range specific to each rg value. For all simulations,Δz=1 m, and initial values of relative humidity, air temperatureand pressure are set to RH=0.99, T=10 °C and p=900 hPa,respectively.

Loftus, Adrian M.↗

Interpreting Precession-Driven δ O-18 Variability in the South Asian Monsoon Region

Speleothem records from the South Asian summer monsoon (SASM) region display variability in the ratio of O-18 and O-16 (δ O-18) in calcium carbonate at orbital frequencies. The dominant mode of variability in many of these records reflects cycles of precession. There are several potential explanations for why SASM speleothem records show a strong precession signal, including changes in temperature, precipitation, and circulation. Here we use an Earth system model with water isotope tracers and water-tagging capability to deconstruct the precession signal found in SASM speleothem records. Our results show that cycles of precession-eccentricity produce changes in SASM intensity that correlate with local temperature, precipitation, and δ O-18. However, neither the amount effect nor temperature differences are responsible for the majority of the SASM δ O-18 variability. Instead, changes in the relative moisture contributions from different source regions drive much of the SASM δ O-18 signal, with more nearby moisture sources during Northern Hemisphere summer at aphelion and more distant moisture sources during Northern Hemisphere summer at perihelion. Further, we find that evaporation amplifies the δ O-18 signal of soil water relative to that of precipitation, providing a better match with the SASM speleothem records. This work helps explain a significant portion of the long-term variability found in SASM speleothem records.

paleoclimate↗

Preliminary evaluation of the contaminant induced environment for the space shuttle orbiter

A preliminary evaluation of the on-orbit induced environment from identified major sources of contamination for the STS shuttle orbiter is presented. A contamination computer mathematical model is discussed that was used to develop the description and predictions of the induced environment along with the extent and physical makeup of the molecular induced environment from these sources. The predicted induced molecular environment from each source is evaluated against current Space Shuttle Program on-orbit contamination control criteria. The flash evaporator vents and the VCS 25-lb thrust engines are shown to significantly exceed applicable contamination control criteria and were the subject of extensive evaluation. Preliminary conclusions concerning the contaminant potential of these sources along with recommendations for various measures of contamination control regarding the shuttle orbiter design and operational activities are made.

Bareiss, L. E.↗

Challenges in the development of the orbiter active thermal control subsystem

A number of major challenges were faced in the design and development of the Orbiter Active Thermal Control Subsystem (ATCS). At the system level, the initial challenges were to define an approach that would interface dual Freon coolant loops with multiple coolant loops from other vehicle subsystems with the lowest weight penalty to the Orbiter; and to provide highly responsive vehicle heat rejection throughout all of the Orbiter mission phases. Optimized heat exchangers, representing an advance in the state-of-the-art in heat exchanger design, were developed to transfer heat between the orbiter Freon coolant loops and five other vehicle systems. Flash evaporation was selected as a highly efficient and responsive means for cooling the Orbiter Freon loops during ascent and entry. The Flash Evaporator Subsystem (FES) utilizes cyclic water spray cooling in a chamber maintained at or below the water triple point pressure. A summary of the basic heat transfer research conducted to identify the fundamental heat transfer processes involved in water spray cooling in support of the FES design is given. The high fidelity dynamic analytical model of the FES that was generated to aid in the design of control logic, evaluate performance and simulate ground test and flight anomalies is discussed. A description of the FES and Integrated ATCS testing conducted in the SESL chamber A at NASA-JSC is also presented.

Nason, J. R.↗

General Report of the Researches of Snowpack Properties, Snowmelt Runoff and Evapotranspiration in Japan

A method was developed for estimating the distribution of snow and the snow water equivalent in Japan by combining LANDSAT data with the degree day method. A snow runoff model was improved and applied to the Okutadami River basin. The Martinec Rango model from the U.S. was applied to Japanese river basins to verify its applicability. This model was then compared with the Japanese model. Analysis of microwave measurements obtained by a radiometer on a tower over dry snow in Hokkaido indicate a certain correlation between brightness temperature and snowpack properties. A correlation between brightness temperature and depth of dry snow in an inland plain area was revealed in NIMBUS SMMR data obtained from the U.S. Calculation of evaporation using airborne remote sensing data and a Priestley-Taylor type of equation shows that the differentiation of evaporation with vegetation type is not remarkable because of little evapotransportation in winter.

Takeda, K.↗

Numerical simulations of loops heated to solar flare temperatures. III - Asymmetrical heating

A numerical model is defined for asymmetric full solar flare loop heating and comparisons are made with observational data. The Dynamic Flux Tube Model is used to describe the heating process in terms of one-dimensional, two fluid conservation equations of mass, energy and momentum. An adaptive grid allows for the downward movement of the transition region caused by an advancing conduction front. A loop 20,000 km long is considered, along with a flare heating system and the hydrodynamic evolution of the loop. The model was applied to generating line profiles and spatial X-ray and UV line distributions, which were compared with SMM, P78-1 and Hintori data for Fe, Ca and Mg spectra. Little agreement was obtained, and it is suggested that flares be treated as multi-loop phenomena. Finally, it is concluded that chromospheric evaporation is not an effective mechanism for generating the soft X-ray bursts associated with flares.

Cheng, C.-C.↗

BOREAS HYD-8 Throughfall Data

The Boreal Ecosystem-Atmosphere Study (BOREAS) Hydrology (HYD)-8 team made measurements of surface hydrological processes at the Southern Study Area (SSA) and Northern Study Area (NSA) Old Black Spruce (OBS) Tower Flux sites, supporting its research into point hydrological processes and the spatial variation of these processes. These data were collected during the 1994 and 1996 field campaigns. Data collected may be useful in characterizing canopy interception, drip, throughfall, moss interception, drainage, evaporation, and capacity during the growing season at daily temporal resolution. This particular data set contains the measurements of throughfall, which is the amount of precipitation that fell through the canopy. A nested spatial sampling plan was implemented to determine spatial variations of the measured hydrological processes and ultimately the impact of these variations on modeled carbon and water budgets. These data are stored in ASCII text files. The data files are available on a CD-ROM (see document number 20010000884) or from the Oak Ridge National Laboratory (ORNL) Distributed Active Archive Center (DAAC).

Wang, Xue-Wen↗