Search NASA⌕ Search

SEARCH · Search NASA

Results for “Envelope analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50
All sourcesNASA NTRSDOE OSTI
NASA NTRS2010

Space Shuttle Main Engine (SSME) Reliability and Analysis Evolution

The Space Shuttle Main Engine (SSME) is a large thrust class, reusable, staged combustion cycle rocket engine employing liquid hydrogen and liquid oxygen propellants. A cluster of three SSMEs is used on every space shuttle mission to propel the space shuttle orbiter vehicle into low earth orbit. Development of the SSME began in the early 70 s and the first flight of the space shuttle occurred in 1981. Today, the SSME has accrued over one million seconds of ground test and flight operational time, launching 129 space shuttle missions. Given that the SSME is used to launch a manned vehicle, its reliability must be commensurate for the task. At the same time, the SSME is a high performance, high power density engine which traditionally does not lend itself towards high reliability. Furthermore, throughout its history, the SSME operational envelope has been explored and expanded leading to several major test failures. Hence, assessing the reliability of the SSME throughout its history has been a challenging undertaking. This paper provides a review and discussion of SSME reliability assessment techniques and results over its history. Basic reliability drivers such as engine design, test program, major failures, redesigns and upgrades will also be discussed.

Stephens, Walter E.↗
DOE OSTI2017

Expansion of Kes 73, A Shell Supernova Remnant Containing a Magnetar

Of the 30 or so Galactic magnetars, about 8 are in supernova remnants (SNRs). One of the most extreme magnetars, 1E 1841−045, is at the center of the SNR Kes 73 (G27.4+0.0), whose age is uncertain. We measure its expansion using three Chandra observations over 15 years, obtaining a mean rate of 0.023%±0.002% yr{sup −1}. For a distance of 8.5 kpc, we obtain a shell velocity of 1100 km s{sup −1} and infer a blast wave speed of 1400 km s{sup −1}. For Sedov expansion into a uniform medium, this gives an age of 1800 years. Derived emission measures imply an ambient density of about 2 cm{sup −3} and an upper limit on the swept-up mass of about 70 M{sub ⊙}, with lower limits of tens of M{sub ⊙}, confirming that Kes 73 is in an advanced evolutionary stage. Our spectral analysis shows no evidence for enhanced abundances as would be expected from a massive progenitor. Our derived total energy is 1.9×10{sup 51} erg, giving a very conservative lower limit to the magnetar’s initial period of about 3 ms, unless its energy was lost by non-electromagnetic means. We see no evidence of a wind-blown bubble as would be produced by a massive progenitor, or any evidence that the progenitor of Kes 73/1E 1841−045 was anything but a normal red supergiant producing a Type IIP supernova, though a short-lived stripped-envelope progenitor cannot be absolutely excluded. Kes 73's magnetar thus joins SGR 1900+14 as magnetars resulting from relatively low-mass progenitors.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1961

Analysis of a Pilot Airplane Lateral Instability Experienced with the X-15 Airplane

An analysis is made of a lateral-control problem in which the pilot, through normal application of control, induces divergent oscillations in bank angle. The problem, first encountered on the X-15 simulator and later confirmed in flight, is explained through the use of root-locus plots of the pilot-airplane combination in which the pilot is represented by a human transfer function. A parameter is developed which is useful for predicting the lateral-control problem and for showing the effect of the principal aerodynamic and inertial parameters. Also, means of determining regions in the flight envelope where the pilot-airplane would be susceptible to lateral instability are developed.

Taylor, Lawrence W., Jr.↗
NASA NTRS2001

Mars Atmospheric Oxidant Sensor (MAOS): An In-Situ Heterogeneous Chemistry Analysis

We describe a chemometric array sensor, the Mars Atmospheric Oxidant Sensor (MAOS, pronounced "mouse '') that is designed measure the oxidation rate of thin films on the martian surface. We select films that are sensitive to particular types of oxidants, that represent key elements in the martian soil, or that emulate prebiotic materials. Concern that naturally arising martian oxidants may have destroyed evidence of ancient life on Mars was raised by the Viking mission in the 1970's. The possibility that oxidants may limit the viability of biologica1 habitats is particularly timely in light of recent suggestions of contemporary flowing water on Mars. By controlling the temperature of the films, as well as their exposure to dust and ultraviolet light, MAOS will discriminate among leading hypotheses for oxidant production. MAOS weighs 55 grams, fits in a 6 x 7 x 2 cm envelope, and uses 250 mW power. Much of the enabling technology was developed for the MOx experiment, lost on the Russian Mars '96 mission.

Zent, A. P.↗
NASA NTRS2011

Kepler and Ground-Based Transits of the exo-Neptune HAT-P-11b

We analyze 26 archival Kepler transits of the exo-Neptune HAT-P-11b, supplemented by ground-based transits observed in the blue (B band) and near-IR (J band). Both the planet and host star are smaller than previously believed; our analysis yields Rp = 4.31 R xor 0.06 R xor and Rs = 0.683 R solar mass 0.009 R solar mass, both about 3 sigma smaller than the discovery values. Our ground-based transit data at wavelengths bracketing the Kepler bandpass serve to check the wavelength dependence of stellar limb darkening, and the J-band transit provides a precise and independent constraint on the transit duration. Both the limb darkening and transit duration from our ground-based data are consistent with the new Kepler values for the system parameters. Our smaller radius for the planet implies that its gaseous envelope can be less extensive than previously believed, being very similar to the H-He envelope of GJ 436b and Kepler-4b. HAT-P-11 is an active star, and signatures of star spot crossings are ubiquitous in the Kepler transit data. We develop and apply a methodology to correct the planetary radius for the presence of both crossed and uncrossed star spots. Star spot crossings are concentrated at phases 0.002 and +0.006. This is consistent with inferences from Rossiter-McLaughlin measurements that the planet transits nearly perpendicular to the stellar equator. We identify the dominant phases of star spot crossings with active latitudes on the star, and infer that the stellar rotational pole is inclined at about 12 deg 5 deg to the plane of the sky. We point out that precise transit measurements over long durations could in principle allow us to construct a stellar Butterfly diagram to probe the cyclic evolution of magnetic activity on this active K-dwarf star.

Deming, Drake↗
NASA NTRS2011

Towards Simulating a Realistic Planetary Seismic Wavefield: The Contribution of the Megaregolith and Low-Velocity Waveguides

Lunar seismograms are distinctly different from their terrestrial counterparts. The Apollo lunar seismometers recorded moonquakes without distinct P- or S-wave arrivals; instead waves arrive as a diffuse coda that decays over several hours making the identification of body waves difficult. The unusual character of the lunar seismic wavefield is generally tied to properties of the megaregolith: it consists of highly fractured and broken crustal rock, the result of extensive bombardment of the Moon. The megaregolith extends several kilometers into the lunar crust, possibly into the mantle in some regions, and is covered by a thin coating of fine-scale dust. These materials possess very low seismic velocities that strongly scatter the seismic wavefield at high frequencies. Directly modeling the effects of the megaregolith to simulate an accurate lunar seismic wavefield is a challenging computational problem, owing to the inherent 3-D nature of the problem and the high frequencies (greater than 1 Hz) required. Here we focus on modeling the long duration code, studying the effects of the low velocities found in the megaregolith. We produce synthetic seismograms using 1-D slowness integration methodologies, GEMINI and reflectivity, and a 3-D Cartesian finite difference code, Wave Propagation Program, to study the effect of thin layers of low velocity on the surface of a planet. These codes allow us generate seismograms with dominant frequencies of approximately 1 Hz. For background lunar seismic structure we explore several models, including the recent model of Weber et al., Science, 2011. We also investigate variations in megaregolithic thickness, velocity, attenuation, and seismogram frequency content. Our results are compared to the Apollo seismic dataset, using both a cross correlation technique and integrated envelope approach to investigate coda decay. We find our new high frequency results strongly support the hypothesis that the long duration of the lunar seismic codes is generated by the presence of the low velocity megaregolith, and that the diffuse arrivals are a combination of scattered energy and multiple reverberations within this layer. The 3-D modeling indicates the extreme surface topography of the Moon adds only a small contribution to scattering effects, though local geology may play a larger role. We also study the effects of the megaregolith on core reflected and converted phases and other body waves. Our analysis indicates detection of core interacting arrivals with a polarization filter technique is robust and lends the possibility of detecting other body waves from the Moon.

Schmerr, Nicholas C.↗
NASA NTRS2007

Single-Shot Rotational Raman Thermometry for Turbulent Flames Using a Low-Resolution Bandwidth Technique

An alternative optical thermometry technique that utilizes the low-resolution (order 10(exp 1)/cm) pure-rotational spontaneous Raman scattering of air is developed to aid single-shot multiscalar measurements in turbulent combustion studies. Temperature measurements are realized by correlating the measured envelope bandwidth of the pure-rotational manifold of the N2/O2 spectrum with a theoretical prediction of a species-weighted bandwidth. By coupling this thermometry technique with conventional vibrational Raman scattering for species determination, we demonstrate quantitative spatially resolved, single-shot measurements of the temperature and fuel/oxidizer concentrations in a high-pressure turbulent Cf4-air flame. Our technique provides not only an effective means of validating other temperature measurement methods, but also serves as a secondary thermometry technique in cases where the anti-Stokes vibrational N2 Raman signals are too low for a conventional vibrational temperature analysis.

Kojima, Jun↗
DOE OSTI2022

SAXS analysis of the intrinsic tenase complex bound to a lipid nanodisc highlights intermolecular contacts between factors VIIIa/IXa

Abstract The intrinsic tenase (Xase) complex, formed by factors (f) VIIIa and fIXa, forms on activated platelet surfaces and catalyzes the activation of factor X to Xa, stimulating thrombin production in the blood coagulation cascade. The structural organization of the membrane-bound Xase complex remains largely unknown, hindering our understanding of the structural underpinnings that guide Xase complex assembly. Here, we aimed to characterize the Xase complex bound to a lipid nanodisc with biolayer interferometry (BLI), Michaelis–Menten kinetics, and small-angle X-ray scattering (SAXS). Using immobilized lipid nanodiscs, we measured binding rates and nanomolar affinities for fVIIIa, fIXa, and the Xase complex. Enzyme kinetic measurements demonstrated the assembly of an active enzyme complex in the presence of lipid nanodiscs. An ab initio molecular envelope of the nanodisc-bound Xase complex allowed us to computationally model fVIIIa and fIXa docked onto a flexible lipid membrane and identify protein–protein interactions. Our results highlight multiple points of contact between fVIIIa and fIXa, including a novel interaction with fIXa at the fVIIIa A1–A3 domain interface. Lastly, we identified hemophilia A/B-related mutations with varying severities at the fVIIIa/fIXa interface that may regulate Xase complex assembly. Together, our results support the use of SAXS as an emergent tool to investigate the membrane-bound Xase complex and illustrate how mutations at the fVIIIa/fIXa dimer interface may disrupt or stabilize the activated enzyme complex.

Hematology↗
NASA NTRS1989

On trajectory generation for flexible space crane: Inverse dynamics analysis by LATDYN

For future in-space construction facility, one or more space cranes capable of manipulating and positioning large and massive spacecraft components will be needed. Inverse dynamics was extensively studied as a basis for trajectory generation and control of robot manipulators. The focus here is on trajectory generation in the gross-motion phase of space crane operation. Inverse dynamics of the flexible crane body is much more complex and intricate as compared with rigid robot link. To model and solve the space crane's inverse dynamics problem, LATDYN program which employs a three-dimensional finite element formulation for the multibody truss-type structures will be used. The formulation is oriented toward a joint dominated structure which is suitable for the proposed space crane concept. To track a planned trajectory, procedures will be developed to obtain the actuation profile and dynamics envelope which are pertinent to the design and performance requirements of the space crane concept.

Chen, G.-S.↗
DOE OSTI2019

Evaluation of earthquake stress parameters and its scaling during the 2016-2017 Amatrice-Norcia-Visso sequence -- Part I

The Amatrice–Norcia–Visso sequence is distinguished by complex behaviour that is somewhat atypical of main-shock–aftershock sequences, as there were multiple large main shocks that continued for months. Here, we focus on the Amatrice sequence (main shock 2016 August 24, M w = 5.97) to evaluate the apparent stress values and magnitude-dependent scaling in order to improve our knowledge of processes that control small and large earthquakes within this active region of Italy. Apparent stress is proportional to the ratio of radiated seismic energy and seismic moment, and as such, these stress parameters play an important role in hazard prediction as they have a strong effect on the observed and predicted ground shaking. We analyse 83 events of the sequence from 2016 August 24 to October 16, within a radius of 20 km from the main shock and with an M w ranging between 5.97 and 2.72. Taking advantage of the averaging nature of coda waves, we analyse coda-envelope-based spectral ratios between neighbouring event pairs. We use equations proposed by Walter et al. to consider stable, low-frequency and high-frequency spectral ratio levels which provide measures of the corner frequency and apparent stress ratios of the events within the sequence. The results demonstrate non-self-similar behaviour within the sequence, indicating a change in dynamics between the largest events and the smaller aftershocks. The apparent stress and corner frequency estimates are compared to those obtained by Malagnini and Munafò who utilized hundreds of direct S-wave spectral ratio measurements to obtain their results. Although our analysis is based only on 83 events, our results are in very good agreement, demonstrating once more that the use of coda waves is very stable and provides lower variance measures than those using direct waves. A comparison with recent Central Apennines source scaling models derived from various seismic sequences (1997–1998 Colfiorito, 2002 San Giuliano di Puglia, 2009 L'Aquila) shows that the Amatrice sequence source scaling in this study is well represented by the models proposed by Pacor et al. and Malagnini and Mayeda.

58 GEOSCIENCES↗
DOE OSTI2020

The shape of SN 1993J re-analysed

SN 1993J is one of the best-studied Type IIb supernovae. Spectropolarimetric data analyses were published over two decades ago at a time when the field of supernova spectropolarimetry was in its infancy. Here, we present a new analysis of the spectropolarimetric data of SN 1993J and an improved estimate of its interstellar polarization (ISP) as well as a critical review of ISP removal techniques employed in the field. The polarization of SN 1993J is found to show significant alignment on the q - u plane, suggesting the presence of a dominant axis and therefore of continuum polarization. We also see strong line polarization features, including H β, He i λ5876, H α, He i λ6678, He i λ7065, and high velocity (HV) components of He i λ5876 and H α. SN 1993J is therefore the second example of a stripped-envelope supernova, alongside iPTF13bvn, with prominent HV helium polarization features, and the first to show a likely HV H α contribution. Overall, we determine that the observed features can be interpreted as the superposition of anisotropically distributed line forming regions over ellipsoidal ejecta. We cannot exclude the possibility of an off-axis energy source within the ejecta. These data demonstrate the rich structures that are inaccessible if solely considering the flux spectra but can be probed by spectropolarimetric observations. In future studies, the new ISP corrected data can be used in conjunction with 3D radiative transfer models to better map the geometry of the ejecta of SN 1993J.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

Ceramic Composite Experimental Testing Status

Over recent years, ceramic matrix materials such as SiC–SiC and C–C have been gaining interest for use in fusion reactors, light water reactors (LWRs), and high-temperature reactors (HTRs). These materials are good candidates to operate in very high temperature and moderate to high radiation environments. The evaluation of composite materials, in general, is challenging because of variations in precursor materials, variations in the fabrication process across fabricators, and the wide range of potential fiber architectures, to name a few. However, the need to evaluate neutron-irradiated properties adds another layer of complexity, which includes cost, timeline, and specimen size limitations (often associated with irradiation testing). A qualification methodology for the use of ceramic composites is provided in the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code Section III-5-HHB. The methodology is supported by ASTM International (ASTM) guides, which provide a pathway to accomplish this effort. Part of the qualification strategy is for the designer to collect material property data on environmental conditions representative of its design envelope. These data include irradiation effects. This report presents an experimental study and test campaign developed to partially address this gap by providing initial mechanical and physical property data required for design. A variety of different materials using different manufacturing techniques are considered as part of this campaign. The test plan suggests performing a screening or partial irradiation study to assist the designer during the material selection process. The designer can then perform a more comprehensive qualification study if the material performance is promising. This work focuses on the status of the specimen preparations (machining of samples), the current test methods and failure analysis as well as the preparation of irradiation vehicles for the irradiation campaign. The irradiation will be performed at Oak Ridge National Laboratory (ORNL) in the High Flux Isotope Reactor (HFIR) and at Idaho National Laboratory (INL) in the Advanced Test Reactor (ATR).

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2019

Modulational instability and soliton trains in a model for two-mode fiber ring lasers

A model of orthogonally polarized two-field fiber ring laser with a linear gain is considered, with emphasis on the continuous-wave stability and the existence of soliton trains. The continuous-wave stability analysis is carried out within the framework of the modulational-instability approach, the variations of the gain spectrum with the modulation frequency and characteristic parameters of the model give rise to a rich variety of stability features including single-band and multiband stability regions. Seeking for pulse structures of the model, the two coupled cubic complex Ginzburg–Landau equations describing individual mode propagations are transformed into a set of coupled, first-order nonlinear ordinary-differential equations for the amplitudes and phases of the two modes. Numerical simulations of the last set of coupled equations indicate that in the anomalous dispersion regime, envelopes of the two fields are periodic trains of pulses the amplitudes of which are affected by the linear gain.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2017

Planet-induced Stellar Pulsations in HAT-P-2's Eccentric System

Extrasolar planets on eccentric short-period orbits provide a laboratory in which to study radiative and tidal interactions between a planet and its host star under extreme forcing conditions. Studying such systems probes how the planet’s atmosphere redistributes the time-varying heat flux from its host and how the host star responds to transient tidal distortion. Here, we report the insights into the planet–star interactions in HAT-P-2's eccentric planetary system gained from the analysis of ∼350 hr of 4.5 μ m observations with the Spitzer Space Telescope . The observations show no sign of orbit-to-orbit variability nor of orbital evolution of the eccentric planetary companion, HAT-P-2 b. The extensive coverage allows us to better differentiate instrumental systematics from the transient heating of HAT-P-2 b’s 4.5 μ m photosphere and yields the detection of stellar pulsations with an amplitude of approximately 40 ppm. These pulsation modes correspond to exact harmonics of the planet’s orbital frequency, indicative of a tidal origin. Transient tidal effects can excite pulsation modes in the envelope of a star, but, to date, such pulsations had only been detected in highly eccentric stellar binaries. Current stellar models are unable to reproduce HAT-P-2's pulsations, suggesting that our understanding of the interactions at play in this system is incomplete.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS2021

Impact of environmental attributes on the uncertainty in MAIAC/MODIS AOD retrievals: A comparative analysis

This work examines the impact of different environmental attributes on the uncertainty in satellite-based Aerosol Optical Depth (AOD) retrieval against the benchmark Aerosol Robotic Network (AERONET) AOD measurements at 21 sites across North Africa, California and Germany, in the years 2007–2017. As a first step, we studied the effects of spatial averaging the Multi-Angle Implementation of Atmospheric Correction (MAIAC) AOD retrievals, and of temporal averaging the AERONET AOD around the satellite (Aqua) overpass, on the agreement between the two products. AERONET AOD averaging over a time-window of ±15 min around the satellite overpass and the 1 ×1 km2 spatial grid of MAIAC were found to provide the best AOD retrieval performance. Next, MAIAC AOD were stratified according to different co-measured environmental attributes (aerosol loading, dominant particle size, vegetation cover, and prevailing particle type) and analyzed against the AERONET AOD. The envelope of the expected retrieval error varied considerably among different environmental attributes categories, with more accurate AOD retrievals obtained over highly vegetated areas (i.e. less surface reflectance) than over arid areas. Moreover, the retrieval accuracy was found to be sensitive to the aerosol loading and particle size, with a large bias between the MAIAC and AERONET AOD during high aerosol loading of coarse particles. In addition, the retrieval accuracy of MAIAC AOD was found to depend on the aerosol type due to the aerosol model assumptions regarding their optical properties.

AOD RETRIEVAL↗
DOE OSTI2018

Structure of a cleavage-independent HIV Env recapitulates the glycoprotein architecture of the native cleaved trimer

Furin cleavage of the HIV envelope glycoprotein is an essential step for cell entry that enables formation of well-folded, native-like glycosylated trimers, releases constraints on the fusion peptide, and limits enzymatic processing of the N-glycan shield. Here, we show that a cleavage-independent, stabilized, soluble Env trimer mimic (BG505 NFL.664) exhibits a “closed-form”, native-like, prefusion conformation akin to furin-cleaved Env trimers. The crystal structure of BG505 NFL.664 at 3.39 Å resolution with two potent bNAbs also identifies the full epitopes of PGV19 and PGT122 that target the receptor binding site and N332 supersite, respectively. Quantitative site-specific analysis of the glycan shield reveals that native-like glycan processing is maintained despite furin-independent maturation in the secretory pathway. Thus, cleavage-independent NFL Env trimers exhibit quaternary protein and carbohydrate structures similar to the native viral spike that further validate their potential as vaccine immunogen candidates.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

A low-luminosity core-collapse supernova very similar to SN 2005cs

ABSTRACT We present observations and analysis of PSN J17292918+7542390, a low-luminosity Type II-P supernova (LL SN IIP). The observed sample of such events is still low, and their nature is still under debate. Such SNe are similar to SN 2005cs, a well-observed LL Type II-P event, having low expansion velocities, and small ejected 56Ni mass. We have developed a robust and relatively fast Monte Carlo code that fits semi-analytic models to light curves of core-collapse SNe. This allows the estimation of the most important physical parameters, like the radius of the progenitor star, the mass of the ejected envelope, the mass of the radioactive nickel synthesized during the explosion, among others. PSN J17292918+7542390 has $R_0 = 91_{-70}^{+119} \times 10^{11} \, \text{cm}$, $M_\text{ej} = 9.89_{-1.00}^{+2.10} \, \mathrm{ M}_{\odot }$, $E_{\mbox{kin}} = 0.65_{-0.18}^{+0.19} \, \text{foe}$, and $v_{\mbox{exp}} = 3332_{-347}^{+216}$ km s−1, for its progenitor radius, ejecta mass, kinetic energy, and expansion velocity, respectively. The initial nickel mass of the PSN J17292918+7542390 turned out to be $1.55_{-0.70}^{+0.75} \times 10^{-3} \, \mathrm{M}_{\odot }$. The measured photospheric velocity at the earliest observed phase is 7000 km s−1. As far as we can tell based on the small population of observed LL SNe IIP, the determined values are typical for these events.

Jäger, Jr, Zoltán↗
DOE OSTI2020

Residential Natural Gas Demand Response Potential during Extreme Cold Events in Electricity-Gas Coupled Energy Systems

In regions where natural gas is used for both power generation and heating buildings, extreme cold weather events can place the electrical system under enormous stress and challenge the ability to meet residential heating and electric demands. Residential demand response has long been used in the power sector to curtail summer electric load, but these types of programs in general have not seen adoption in the natural gas sector during winter months. Natural gas demand response (NG-DR) has garnered interest given recent extreme cold weather events in the United States; however, the magnitude of savings and potential impacts—to occupants and energy markets—are not well understood. We present a case-study analysis of the technical potential for residential natural gas demand response in the northeast United States that utilizes diverse whole-building energy simulations and high-performance computing. Our results show that NG-DR applied to residential heating systems during extreme cold-weather conditions could reduce natural gas demand by 1–29% based on conservative and aggressive strategies, respectively. This indicates a potential to improve the resilience of gas and electric systems during stressful events, which we examine by estimating the impact on energy costs and electricity generation from natural gas. We also explore relationships between hourly indoor temperatures, demand response, and building envelope efficiency.

03 NATURAL GAS↗