Search NASA⌕ Search

SEARCH · Search NASA

Results for “FERROELECTRICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Three-dimensional imaging of vortex structure in a ferroelectric nanoparticle driven by an electric field

Topological defects of spontaneous polarization are extensively studied as templates for unique physical phenomena and in the design of reconfigurable electronic devices. Experimental investigations of the complex topologies of polarization have been limited to surface phenomena, which has restricted the probing of the dynamic volumetric domain morphology in operando. Here, we utilize Bragg coherent diffractive imaging of a single BaTiO 3 nanoparticle in a composite polymer/ferroelectric capacitor to study the behavior of a three-dimensional vortex formed due to competing interactions involving ferroelectric domains. Our investigation of the structural phase transitions under the influence of an external electric field shows a mobile vortex core exhibiting a reversible hysteretic transformation path. We also study the toroidal moment of the vortex under the action of the field. Our results open avenues for the study of the structure and evolution of polar vortices and other topological structures in operando in functional materials under cross field configurations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Hardware functional obfuscation with ferroelectric active interconnects

Existing circuit camouflaging techniques to prevent reverse engineering increase circuit-complexity with significant area, energy, and delay penalty. In this paper, we propose an efficient hardware encryption technique with minimal complexity and overheads based on ferroelectric field-effect transistor (FeFET) active interconnects. By utilizing the threshold voltage programmability of the FeFETs, run-time reconfigurable inverter-buffer logic, utilizing two FeFETs and an inverter, is enabled. Judicious placement of the proposed logic makes it act as a hardware encryption key and enable encoding and decoding of the functional output without affecting the critical path timing delay. Additionally, a peripheral programming scheme for reconfigurable logic by reusing the existing scan chain logic is proposed, obviating the need for specialized programming logic and circuitry for keybit distribution. Our analysis shows an average encryption probability of 97.43% with an increase of 2.24%/ 3.67% delay for the most critical path/ sum of 100 critical paths delay for ISCAS85 benchmarks.

42 ENGINEERING↗
DOE OSTI2023

Embedding security into ferroelectric FET array via in situ memory operation

Non-volatile memories (NVMs) have the potential to reshape next-generation memory systems because of their promising properties of near-zero leakage power consumption, high density and non-volatility. However, NVMs also face critical security threats that exploit the non-volatile property. Compared to volatile memory, the capability of retaining data even after power down makes NVM more vulnerable. Existing solutions to address the security issues of NVMs are mainly based on Advanced Encryption Standard (AES), which incurs significant performance and power overhead. In this paper, we propose a lightweight memory encryption/decryption scheme by exploiting in-situ memory operations with negligible overhead. To validate the feasibility of the encryption/decryption scheme, device-level and array-level experiments are performed using ferroelectric field effect transistor (FeFET) as an example NVM without loss of generality. Besides, a comprehensive evaluation is performed on a 128 × 128 FeFET AND-type memory array in terms of area, latency, power and throughput. Compared with the AES-based scheme, our scheme shows ~22.6×/~14.1× increase in encryption/decryption throughput with negligible power penalty. Furthermore, we evaluate the performance of our scheme over the AES-based scheme when deploying different neural network workloads. Our scheme yields significant latency reduction by 90% on average for encryption and decryption processes.

47 OTHER INSTRUMENTATION↗
DOE OSTI2026

Unconventional magnon-mediated spin torque enabled by ferroelectric domain engineering in multiferroic BiFeO 3

Spin current provides an energy-efficient approach for manipulating magnetization, when its spin polarization aligns with the magnetization direction. However, conventional spin-source materials possess high crystalline symmetry, restricting spin polarization to be orthogonal to both spin and charge current directions. Here, we overcome this limitation by utilizing the concept of magnon-mediated spin-orbit torque through integration of the insulating multiferroic BiFeO 3 with a conventional spin-source material. We observe that spin polarization generated by conventional spin-source material can excite unconventional magnon polarization due to the interplay between cycloidal antiferromagnetic order and the ferroelectric domain structure in BiFeO 3 . This produces an unconventional magnon torque that allows deterministic, field‑free switching of in‑plane magnetization collinear with the current direction, unattainable with conventional spin-source materials. Our results establish multiferroic-based heterostructure as a symmetry‑engineered magnon spin source, paving the way for low-power spintronic devices.

Liang, Yuhan [Tsinghua Univ., Beijing (China); Cor↗
DOE OSTI2021

Deep learning ferroelectric polarization distributions from STEM data via with and without atom finding

Over the last decade, scanning transmission electron microscopy (STEM) has emerged as a powerful tool for probing atomic structures of complex materials with picometer precision, opening the pathway toward exploring ferroelectric, ferroelastic, and chemical phenomena on the atomic scale. Analyses to date extracting a polarization signal from lattice coupled distortions in STEM imaging rely on discovery of atomic positions from intensity maxima/minima and subsequent calculation of polarization and other order parameter fields from the atomic displacements. Here, we explore the feasibility of polarization mapping directly from the analysis of STEM images using deep convolutional neural networks (DCNNs). In this approach, the DCNN is trained on the labeled part of the image (i.e., for human labelling), and the trained network is subsequently applied to other images. We explore the effects of the choice of the descriptors (centered on atomic columns and grid-based), the effects of observational bias, and whether the network trained on one composition can be applied to a different one. This analysis demonstrates the tremendous potential of the DCNN for the analysis of high-resolution STEM imaging and spectral data and highlights the associated limitations.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Magnetic field-induced ferroelectricity in S = 1/2 kagome staircase compound PbCu 3 TeO 7

Ni 3 V 2 O 8 is an archetypical multiferroic material with a kagome staircase structure of S = 1 (Ni 2+ ) spins whose complex interplay between spin ordering and ferroelectricity has been studied for more than a decade. Here in this paper, we report a new kagome staircase compound PbCu 3 TeO 7 with Cu 2+ (S = 1/2) spins that exhibits two Néel temperatures at T N1 = 36 K and T N2 = 24 K, and a magnetic field (H)-induced electric polarization (P) below T N2 . Pyroelectric and magnetoelectric current measurements in magnetic fields up to 60 T reveal that for H||c of ~ 8.3 T, a spin-flop transition induces a transverse P||a with a magnitude of 15 µC/m 2 below T N2 . Furthermore, for a parallel configuration with P//H//a, two spin-flop transitions occur, the first at ~ 16 T with P//a of 14 µC/m 2 , and the second at ~ 38 T, where P disappears. Monte Carlo simulations based on 12 major exchange interactions uncover that a sinusoidal amplitude modulation of the spins occurs along the b-axis below T N1 and an incommensurate, proper screw-type spin order occurs in the ac-plane below T N2 . The simulation results show that P//a under H//c stems from a spin-flop transition facilitating an ab-plane-type spiral order, while the two successive spin-flop transitions for H//a result in spiral spin orders in the ab- and bc-planes. Based on the experimental and theoretical results, we establish field-induced magnetic and electric phase diagrams for the two H directions, demonstrating that the distorted kagome staircase structure with competing intra–interlayer interactions and lifted frustration creates a plethora of different noncollinear spin textures of S = 1/2 spins that in turn induce electric polarization.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2018

Pyroelectric energy conversion with large energy and power density in relaxor ferroelectric thin films

The need for efficient energy utilization is driving research into ways to harvest ubiquitous waste heat. Here, we explore pyroelectric energy conversion from low-grade thermal sources that exploits strong field- and temperature-induced polarization susceptibilities in the relaxor ferroelectric 0.68Pb(Mg 1/3 Nb 2/3 )O 3 -0.32PbTiO 3 . Electric-field-driven enhancement of the pyroelectric response (as large as -550 μC m -2 K -1 ) and suppression of the dielectric response (by 72%) yield substantial figures of merit for pyroelectric energy conversion. Field- and temperature-dependent pyroelectric measurements highlight the role of polarization rotation and field-induced polarization in mediating these effects. Solid-state, thin-film devices that convert low-grade heat into electrical energy are demonstrated using pyroelectric Ericsson cycles, and optimized to yield maximum energy density, power density and efficiency of 1.06 J cm -3 , 526 W cm -3 and 19% of Carnot, respectively; the highest values reported to date and equivalent to the performance of a thermoelectric with an effective ZT ≈ 1.16 for a temperature change of 10 K. Our findings suggest that pyroelectric devices may be competitive with thermoelectric devices for low-grade thermal harvesting.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2018

The relation of local order to material properties in relaxor ferroelectrics

Correlating electromechanical and dielectric properties with nanometre-scale order is the defining challenge for the development of piezoelectric oxides. Current lead (Pb)-based relaxor ferroelectrics can serve as model systems with which to unravel these correlations, but the nature of the local order and its relation to material properties remains controversial. Here we employ recent advances in diffuse scattering instrumentation to investigate crystals that span the phase diagram of PbMg1/3Nb2/3O3-xPbTiO(3) (PMN-xPT) and identify four forms of local order. From the compositional dependence, we resolve the coupling of each form to the dielectric and electromechanical properties observed. We show that relaxor behaviour does not correlate simply with ferroic diffuse scattering; instead, it results from a competition between local antiferroelectric correlations, seeded by chemical short-range order, and local ferroic order. The ferroic diffuse scattering is strongest where piezoelectricity is maximal and displays previously unrecognized modulations caused by anion displacements. Our observations provide new guidelines for evaluating displacive models and hence the piezoelectric properties of environmentally friendly next-generation materials.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Bowing to ferroelectric artificial flux closure

Here by inserting an epitaxial in-plane buffer layer of Bi 5 FeTi 3 O 15 , an artificial flux closure architecture enables ferroelectric polarization from a single unit cell of BaTiO 3 or BiFeO 3 .

36 MATERIALS SCIENCE↗
DOE OSTI2018

Dielectric Response of Quantum Critical Ferroelectric as a Function of Pressure

In this study we report for the first time measurements of the dielectric loss of single-crystal SrTiO 3 under the application of hydrostatic pressure up to 20 kbar and temperatures down to 200 mK which allow us to comment on the evolution of new fundamental material properties and their relationship with the recently discovered quantum critical phenomena in this material. The well known 18 K peak or shoulder was no longer observed after pressure was applied, even after subsequently removing it, suggesting it is associated with the twin walls formed at the 110 K cubic-tetragonal transition. The family of familiar peaks were all seen to increase in temperature linearly with pressure, and the height of the 9.4 K peak was drastically suppressed by even the smallest pressures. This peak is discussed in the context of a postulated ferroelectric quantum critical point in SrTiO 3 and the behaviour of its size linked to the position of this point on the recently established phase diagram.

36 MATERIALS SCIENCE↗
DOE OSTI2020

An intriguing intermediate state as a bridge between antiferroelectric and ferroelectric perovskites

The configuration of electric or magnetic dipoles embedded into a crystal lattice gives rise to the defining physical properties of a functional material. The prevailing antiferroelectric materials have so far been allusively assumed to be in a strict antiparallel electric polarization configuration, although they have shown huge potential applications for use in electronic devices. Herein, we have revealed for the first time the complex crystal structure of an intermediate state between the two conventional antiferroelectric (AFE) and ferroelectric (FE) states in PbZrO 3 -based perovskites by employing a combination of advanced synchrotron X-ray, neutron and three-dimensional (3D) electron diffraction techniques. We found that the intermediate state displays an intriguing flexible configuration of a sinusoidal wave functional with imbalanced polarization, different to the commonly believed antiparallel and balanced polarization. Such an intermediate state was concluded to act as a bridge between the conventional AFE and FE states. Our observations offer new insight into the AFE state and its transformation into the FE state. Such an intermediate state with a unique polarization configuration is believed to be a common feature that occurs in high-performance AFE perovskite materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Pressure-induced tuning of the triangular-honeycomb structure of ferroelectric quantum spin liquid candidate, TbInO 3

The pressure response of the triangular-honeycomb-structured quantum spin liquid candidate, TbInO 3 , has been determined via neutron powder diffraction up to 5.75(5) GPa. The system retains hexagonal symmetry up to the maximum pressure considered. The structure was found to compress less anisotropically than related compounds, though it is more compressible within the 2D plane than between subsequent layers. Through extracting the O-atom coordinates we find experimental evidence that may suggest the enhancement of ferroelectricity at pressures as low as 3 GPa.

Ridley, Christopher J. [Oak Ridge National Laborat↗
DOE OSTI2016

Correlation between piezoresponse nonlinearity and hysteresis in ferroelectric crystals at nanoscale

Here, the nonlinear response of a ferroic to external fields has been studied for decades, garnering interest for both understanding fundamental physics, as well as technological applications such as memory devices. Yet, the behavior of ferroelectrics at mesoscopic regimes remains poorly understood, and the scale limits of theories developed for macroscopic regimes are not well tested experimentally. Here, we test the link between piezo-nonlinearity and local piezoelectric strain hysteresis, via AC-field dependent measurements in conjunction with first order reversal curve (FORC) measurements on (K,Na)NbO 3 crystals with band-excitation piezoelectric force microscopy. The correlation coefficient between nonlinearity amplitude and the FORC of the polarization switching shows a clear decrease in correlation with increasing AC bias, suggesting the impact of domain wall clamping on the DC measurement case. Further, correlation of polynomial fitting terms from the nonlinear measurements with the hysteresis loop area reveals that the largest correlations are reserved for the quadratic terms, which is expected for irreversible domain wall motion contributions that impact both piezoelectric behavior as well as minor loop formation. These confirm the link between local piezoelectric nonlinearity, domain wall motion and minor loop formation, and suggest that existing theories (such as Preisach) are applicable at these length scales, with associated implications for future nanoscale devices.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Linear and nonlinear optical probe of the ferroelectric-like phase transition in a polar metal, LiOsO 3

LiOsO 3 is one of the first materials identified in the current literature as a “polar metal,” a class of materials that are simultaneously noncentrosymmetric and metallic. In this work, the linear and nonlinear optical susceptibility of LiOsO 3 is studied by means of ellipsometry and optical second harmonic generation (SHG). Robust optical birefringence is observed using spectroscopic ellipsometry. The nonlinear optical susceptibility extracted from SHG polarimetry reveals that the tensor components are of the same magnitude as in the isostructural insulator LiNbO 3 , except the component along the polar axis d 33 is suppressed by an order of magnitude. Temperature-dependent SHG measurements in combination with Raman spectroscopy indicate a continuous order-disorder type polar phase transition at 140 K. Linear and nonlinear optical microscopy measurements reveal 109°/71° ferroelastic domain walls, like in other trigonal ferroelectrics. No 180° polar domain walls are observed to emerge across the phase transition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Permittivity effects of particle agglomeration in ferroelectric ceramic-epoxy composites using finite element modeling

Here, the size dependence of the dielectric constants of barium titanate or other ferroelectric particles can be explored by embedding particles into an epoxy matrix whose dielectric constant can be measured directly. However, to extract the particle dielectric constant requires a model of the composite medium. We compare a finite element model for various volume fractions and particle arrangements to several effective medium approximations, which do not consider particle arrangement explicitly. For a fixed number of particles, the composite dielectric constant increases with the degree of agglomeration, and we relate this increase to the number of regions of enhanced electric field along the applied field between particles in an agglomerate. Additionally, even for dispersed particles, we find that the composite method of assessing the particle dielectric constant may not be effective if the particle dielectric constant is too high compared to the background medium dielectric constant.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗