Search NASA⌕ Search

SEARCH · Search NASA

Results for “Hourly data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Validation of Fitness for Duty Standards Using Pre- and Post-Flight Capsule Egress and Suited Functional Performance Tasks in Simulated Reduced Gravity (Pilot Egress Fitness)

As NASA prepares for exploration missions, it will be critical to understand and build upon known crew capabilities. Specifically, we need to know the functional capacities of crew at different stages of a mission and characterize these profiles so that the appropriate vehicle requirements and mission concepts of operations (ConOps) can be developed. One of the most complex phases of any missions is when there is a transition between gravity environments. For instance, both physiological adaptation to microgravity and subsequent re-entry into a gravity environment result in reduced functional capacity, even with rigorous adherence to inflight countermeasures. Quantification of the astronauts’ post-landing functional performance is necessary to design ConOps for exploration missions. Specifically, these two high-risk tasks may have to be performed soon after gravity transitions: •Unassisted capsule egress task after return to Earth •Planetary extravehicular activity (EVA) soon after landing on Mars or the Moon This study has been broken down into two phases. A pilot phase to assess the overall feasibility and demonstrate the capability to do these tasks shortly after landing and the full Egress Fitness study, which will be part of the CIPHER complement. This study uses a functional task approach to characterize performance of these high-risk tasks in long-duration ISS crewmembers before flight and shortly after return to Earth. Prior to any testing, each astronaut subject completes a suit fit check to ensure adequate sizing and mobility to be able to complete the EVA tasks. Pilot Egress Fitness pre-flight and post-flight testing includes an Earth based emergency egress out of a functional capsule mockup, and a short Mars gravity EVA simulation including suit donning, hatch egress, ladder descent, task board cable operations, baggage transfer over sand/rocky regolith, alignment with a rear entry port, and suit egress. Pre-flight testing can occur almost anytime pre-flight, but post-flight scheduling is much more critical with the capsule egress test occurring 1-4 hours after landing and the planetary EVA approximately 18-36 hours after landing. Data collected for both tasks includes task completion time, photo, and video. The EVA portion also includes collection of metabolic and heart rate. Pilot Egress Fitness study has completed baseline pre-flight testing on 3 astronaut subjects. Post-flight testing of the first two subjects will be completed in November 2021 and the final subject around March 2022. Results and lessons learned from this pilot study will inform the full Egress Fitness study, which will incorporate additional pre-flight sessions, longer EVA tasks, and post-flight testing on R+1, 4, and 7 to characterize the timeframe of recovery

J R Norcross↗

Distributed Wind Diffusion Model Overview (Presentation)

Distributed wind market demand is driven by current and future wind price and performance, along with several non-price market factors like financing terms, retail electricity rates and rate structures, future wind incentives, and others. We developed a new distributed wind technology diffusion model for the contiguous United States that combines hourly wind speed data at 200m resolution with high resolution electricity load data for various consumer segments (e.g., residential, commercial, industrial), electricity rates and rate structures for utility service territories, incentive data, and high resolution tree cover. The model first calculates the economics of distributed wind at high spatial resolution for each market segment, and then uses a Bass diffusion framework to estimate the evolution of market demand over time. The model provides a fundamental new tool for characterizing how distributed wind market potential could be impacted by a range of future conditions, such as electricity price escalations, improvements in wind generator performance and installed cost, and new financing structures. This paper describes model methodology and presents sample results for distributed wind market potential in the contiguous U.S. through 2050.

17 WIND ENERGY↗

Field Testing of LIDAR-Assisted Feedforward Control Algorithms for Improved Speed Control and Fatigue Load Reduction on a 600-kW Wind Turbine: Preprint

A severe challenge in controlling wind turbines is ensuring controller performance in the presence of a stochastic and unknown wind field, relying on the response of the turbine to generate control actions. Recent technologies such as LIDAR, allow sensing of the wind field before it reaches the rotor. In this work a field-testing campaign to test LIDAR Assisted Control (LAC) has been undertaken on a 600-kW turbine using a fixed, five-beam LIDAR system. The campaign compared the performance of a baseline controller to four LACs with progressively lower levels of feedback using 35 hours of collected data.

17 WIND ENERGY↗

Cosmic-Ray Moisture Probe on North Slope of Alaska Field Campaign Report

In September of 2014 a wide-area snow monitoring device was installed at the U.S. Department of Energy (DOE)’s Barrow, Alaska Atmospheric Radiation Measurement (ARM) Climate Research Facility site. The device is special in that it uses measurements of cosmic-ray neutrons as a proxy for snow water equivalent (SWE) depth. A unique characteristic of the technology is that it integrates over a wide area (as much as 40 ha), in contrast to conventional ground-based technologies, which essentially give point samples. Conventional point-scale technologies are problematic in the Arctic, both because extreme weather conditions are taxing on equipment, and because point measurements can fail to accurately characterize the average SWE over a larger area, even when excellent precision is obtained. The sensor installed in Barrow is, by far, the northernmost of a constellation of sites that makeup the U.S. COsmic ray Soil Moisture Observing System (COSMOS). The sensor is used for SWE measurements in winter and soil moisture measurements in summer. The ability of this type of sensor to operate in the Arctic had not been verified until now. The cosmic-ray sensor was installed on a tripod located approximately 150 m south of the ARM User Facility (Figure 1), and within boundaries of land managed by the ARM Facility. The sensor consists of both “bare” and “moderated” channels, where the moderated channel is the primary output used to calculate SWE. A QDL2100 data logger with pressure sensor was located inside of the User Facility, and a Campbell CS215 temperature and humidity sensor was attached to a rail on the upper deck of the User Facility, to enable near-real-time absolute humidity corrections to the data. The cosmic-ray sensors are connected to the data logger using an armored Cat5e cable that lies on top of the tundra. Data are retrieved hourly via Iridium satellite link.

"North Slope of Alaska, Barrow, soil moisture, cos↗

Integrated Hourly Meteorological Database of 20 Meteorological Stations (1981-2022) for Watershed Function SFA Hydrological Modeling

This dataset contains (a) a script “R_met_integrated_for_modeling.R”, and (b) associated input CSV files: 3 CSV files per location to create a 5-variable integrated meteorological dataset file (air temperature, precipitation, wind speed, relative humidity, and solar radiation) for 19 meteorological stations and 1 location within Trail Creek from the modeling team within the East River Community Observatory as part of the Watershed Function Scientific Focus Area (SFA). As meteorological forcings varied across the watershed, a high-frequency database is needed to ensure consistency in the data analysis and modeling. We evaluated several data sources, including gridded meteorological products and field data from meteorological stations. We determined that our modeling efforts required multiple data sources to meet all their needs. As output, this dataset contains (c) a single CSV data file (*_1981-2022.csv) for each location (20 CSV output files total) containing hourly time series data for 1981 to 2022 and (d) five PNG files of time series and density plots for each variable per location (100 PNG files). Detailed location metadata is contained within the Integrated_Met_Database_Locations.csv file for each point location included within this dataset, obtained from Varadharajan et al., 2023 doi:10.15485/1660962. This dataset also includes (e) a file-level metadata (flmd.csv) file that lists each file contained in the dataset with associated metadata and (f) a data dictionary (dd.csv) file that contains column/row headers used throughout the files along with a definition, units, and data type. Review the (g) ReadMe_Integrated_Met_Database.pdf file for additional details on the script, methods, and structure of the dataset.The script integrates Northwest Alliance for Computational Science and Engineering’s PRISM gridded data product, National Oceanic and Atmospheric Administration’s NCEP-NCAR Reanalysis 1 gridded data product (through the `RCNEP` R package, Kemp et al., doi:10.32614/CRAN.package.RNCEP), and analytical-based calculations. Further, this script downscales the input data into hourly frequency, which is necessary for the modeling efforts.

54 ENVIRONMENTAL SCIENCES↗

Assessment of U.S. Urban Surface Temperature Using GOES-16 and GOES-17 Data: Urban Heat Island and Temperature Inequality

Abstract This study utilizes hourly land surface temperature (LST) data from the Geostationary Operational Environmental Satellite (GOES) to analyze the seasonal and diurnal characteristics of surface urban heat island intensity (SUHII) across 120 largest U.S. cities and their surroundings. Distinct patterns emerge in the classification of seasonal daytime SUHII and nighttime SUHII. Specifically, the enhanced vegetation index (EVI) and albedo (ALB) play pivotal roles in influencing these temperature variations. The diurnal cycle of SUHII further reveals different trends, suggesting that climate conditions, urban and nonurban land covers, and anthropogenic activities during nighttime hours affect SUHII peaks. Exploring intracity LST dynamics, the study reveals a significant correlation between urban intensity (UI) and LST, with LST rising as UI increases. Notably, populations identified as more vulnerable by the social vulnerability index (SVI) are found in high UI regions. This results in discernible LST inequality, where the more vulnerable communities are under higher LST conditions, possibly leading to higher heat exposure. This comprehensive study accentuates the significance of tailoring city-specific climate change mitigation strategies, illuminating LST variations and their intertwined societal implications.

Environmental Sciences & Ecology↗

Interplanetary medium data book, appendix

Computer generated listings of hourly average interplanetary plasma and magnetic field parameters are given. Parameters include proton temperature, proton density, bulk speed, an identifier of the source of the plasma data for the hour, average magnetic field magnitude and cartesian components of the magnetic field. Also included are longitude and latitude angles of the vector made up of the average field components, a vector standard deviation, and an identifier of the source of magnetic field data.

King, J. H.↗

NASA Prediction of Worldwide Energy Resource High Resolution Meteorology Data For Sustainable Building Design

A primary objective of NASA's Prediction of Worldwide Energy Resource (POWER) project is to adapt and infuse NASA's solar and meteorological data into the energy, agricultural, and architectural industries. Improvements are continuously incorporated when higher resolution and longer-term data inputs become available. Climatological data previously provided via POWER web applications were three-hourly and 1x1 degree latitude/longitude. The NASA Modern Era Retrospective-analysis for Research and Applications (MERRA) data set provides higher resolution data products (hourly and 1/2x1/2 degree) covering the entire globe. Currently POWER solar and meteorological data are available for more than 30 years on hourly (meteorological only), daily, monthly and annual time scales. These data may be useful to several renewable energy sectors: solar and wind power generation, agricultural crop modeling, and sustainable buildings. A recent focus has been working with ASHRAE to assess complementing weather station data with MERRA data. ASHRAE building design parameters being investigated include heating/cooling degree days and climate zones.

Chandler, William S.↗

Chromatographic Modeling of 1-Foot Detritiation Test Column Results for the Optimization of Regeneration Time

This report documents the methods and results of a modeling study on a series of data generated by 1-foot test columns for the Water Detritiation project. In order to compliment modeling work already in progress on this project, a purely empirical curve-fitting approach is used in this study to determine chromatographic performance indicators such as retention time, curve width, and the number of chromatographic stages. The data used in this study comes from four sets of chromatographic test separations performed in March through May of 2017 using 1-foot columns. All are using the same flow rates and temperature (room temperature, nominally 25 C°). The first set of data (referred to in this report as the Column 1 data) is a series of twelve breakthrough curve measurements. Prior to each of these twelve runs, the column was regenerated by flowing hydrogen gas through the column, for increasing amounts of time, ranging from 2 hours to 25 hours. The second set of data (referred to as the Column 2 data) is comprised of five measurements of breakthrough curves measured in similar fashion as the Column 1 data, across a range of regeneration times from 2 to 21 hours. The third set of data (referred to as the Purge data) is of three breakthrough curves, measured after a regeneration time of 8 hours, which takes place after a nitrogen purge of 15, 30, or 45 minutes. The fourth data set is a series of five breakthrough curve measurements using a 2 nd batch of stationary phase, taken after regeneration times ranging from 2 to 20 hours. The overall modeling approach is as follows. First, the data is pre-processed for formatting, artifact removal, and is normalized. The data is then fit by integrated versions of four common chromatographic models. The best model is chosen based on the predictive performance of the model, and chromatographic performance values are calculated based on the best model’s fit parameters. Each of these processes are detailed below.

42 ENGINEERING↗

Cambium 2022 Scenario Descriptions and Documentation

The National Renewable Energy Laboratory’s (NREL’s) Cambium data sets are annually released sets of simulated hourly emission, cost, and operational data for a range of modeled futures of the U.S. electric sector with metrics designed to be useful for long-term decision making. The 2022 Cambium data set is the third annual release. The data sets are a companion product to NREL’s Standard Scenarios, which are likewise released annually and are a set of projections of how the U.S. electric sector could evolve across a suite of different potential futures, but covering more scenarios with less temporal granularity. In this documentation, we describe Cambium 2022’s scenarios (Section 3), define the metrics (Section 5), and document the Cambium-specific methods for calculating those metrics (Section 6).

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Cambium 2023 Scenario Descriptions and Documentation

The National Renewable Energy Laboratory's (NREL's) Cambium data sets are annually released sets of simulated hourly emission, cost, and operational data for a range of modeled futures of the U.S. electric sector with metrics designed to be useful for long-term decision- making. The 2023 Cambium data set is the fourth annual release. The data sets are a companion product to NREL's Standard Scenarios, which are likewise released annually and are a set of projections of how the U.S. electric sector could evolve across a suite of different potential futures, but covering more scenarios with less temporal granularity (Gagnon et al. 2024). Information about Cambium and related publications can be found at https://www.nrel.gov/analysis/cambium.html, and the Cambium data sets can be viewed and downloaded at https://scenarioviewer.nrel.gov/. In this documentation, we describe Cambium 2023's scenarios, define the metrics, and document the Cambium-specific methods for calculating those metrics.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Engine Icing Data - An Analytics Approach

Engine icing researchers at the NASA Glenn Research Center use the Escort data acquisition system in the Propulsion Systems Laboratory (PSL) to generate and collect a tremendous amount of data every day. Currently these researchers spend countless hours processing and formatting their data, selecting important variables, and plotting relationships between variables, all by hand, generally analyzing data in a spreadsheet-style program (such as Microsoft Excel). Though spreadsheet-style analysis is familiar and intuitive to many, processing data in spreadsheets is often unreproducible and small mistakes are easily overlooked. Spreadsheet-style analysis is also time inefficient. The same formatting, processing, and plotting procedure has to be repeated for every dataset, which leads to researchers performing the same tedious data munging process over and over instead of making discoveries within their data. This paper documents a data analysis tool written in Python hosted in a Jupyter notebook that vastly simplifies the analysis process. From the file path of any folder containing time series datasets, this tool batch loads every dataset in the folder, processes the datasets in parallel, and ingests them into a widget where users can search for and interactively plot subsets of columns in a number of ways with a click of a button, easily and intuitively comparing their data and discovering interesting dynamics. Furthermore, comparing variables across data sets and integrating video data (while extremely difficult with spreadsheet-style programs) is quite simplified in this tool. This tool has also gathered interest outside the engine icing branch, and will be used by researchers across NASA Glenn Research Center. This project exemplifies the enormous benefit of automating data processing, analysis, and visualization, and will help researchers move from raw data to insight in a much smaller time frame.

Engine Icing↗

Modern Era Retrospective Restrospective-Analysis for Research and Applications (MERRA) Data and Services at the GES DISC

The Modern Era Retrospective-analysis for Research and Applications (MERRA) dataset is a NASA satellite era, 30 year (1979 - present), reanalysis using the Goddard Earth Observing System Data Assimilation System, Version 5 (GEOS-5). The project, run out of NASA's Global Modeling and Assimilation Office at Goddard Space Flight Center, provides the science and application communities with a state-of-the-art global analysis with emphasis on improved estimates of the hydrological cycle over a broad range of weather and climate time scales. MERRA products are generated as a long-term synthesis that places the NASA EOS suite of observations in a climate context. The MERRA analysis is performed at a horizontal resolution of 2/3 longitude x 1/2 latitude (540x361 global gridpoints) with observational analyses every 6 hours. The MERRA output data will include 3 dimensional state fields for every 6 hourly analysis cycle on 42 pressure levels (or 72 terrain following model coordinate levels) from the surface through the stratosphere. Several data products are specifically designed to support chemistry and stratosphere transport modeling. The 2 dimensional surface and atmospheric diagnostics (numbering 259) are being stored on the native grid at 1 hourly intervals. These include radiation and vertical integrals of the atmosphere for water and energy budget studies and also surface diagnostics where the diurnal cycle is important. The one hourly surface and near surface data product will also facilitate research on the integrated analysis of Earth system observations in the land, ocean and cryosphere. The MERRA products are archived and distributed by the Goddard Earth Sciences Data and Information Services Center (GES DISC) through its Modeling DISC Web (MDISC) portal. Multiple data access methods and services are available for MERRA data through MDISC: (1) Mirador offers a quick, comprehensive search of MERRA and all GES DISC archived data holdings, allowing searches on keywords, location names or latitude/longitude box, and date/time, with responses within a few seconds. (2) Giovanni is a GES DISC developed Web application that provides data visualization and analysis online. Giovanni features popular visualizations such as latitude-longitude maps, animations, cross sections, profiles, time series, etc. and some basic statistical analysis functions such as scatter plots and correlation coefficient maps. Users are able to download results in several different formats, including Google Earth. (3) On-the-fly parameter subsetting of data within a spatial/temporal window is provided through a simple select and click Web page. (4) MERRA data are also available via OPeNDAP, GrADS Data Server (GDS) and can be converted to netCDF on the fly.

Berrick, Stephen W.↗

Flexible drift-compensation system for precise 3D force mapping in severe drift environments

The acquisition of dense 3D data sets is of great importance, but also a challenge for scanning probe microscopy (SPM). Thermal drift often induces severe distortions in the data, which usually constrains the acquisition of dense data sets to experiments under ultra-high vacuum and low-temperature conditions. Atom tracking is an elegant approach to compensate for thermal drift and to position the microscope tip with highest precision. Here, we present a flexible drift compensation system which can easily be connected to existing SPM hardware. Furthermore, we describe a 3D data acquisition and position correction protocol, which is capable of handling large and non-linear drift as typically present in room temperature measurements. This protocol is based on atom-tracking for precise positioning of the tip and we are able to acquire dense 3D data sets over several hours at room temperature. The performance of the protocol is demonstrated by presenting 3D data taken on a CaCO{sub 3}(1014) surface with the data density being as large as 85x85x500 pixel.

36 MATERIALS SCIENCE↗

Providing Long-term Solar and Meteorological Resource Information from NASA Research through the GIS-Enabled POWER Web Services Portal

Solar and other renewable energy systems are optimized using geophysical parameters describing information about the solar resource and meteorological environments and how those environments may be changing in time. The Prediction of Worldwide Renewable Energy Resource (POWER) team at the NASA LaRC Research Center deployed its first version of the revitalized POWER geophysical parameter website that employs Esri Geographic Information System (GIS) tools. This web application provides access to both time series and climatological data sets spanning from a few days behind real-time back to the early 1980’s with a spatial resolution of 0.5 x 0.5 degree, thus extending over 30 years. The GIS tools enable, generate and store climatological averages using spatial queries and calculations in a spatial database resulting in greater accessibility to government agencies, industry and individuals. There is an API that provides data through a URL coding and can also invoked inside user software packages. Output data formats now include ASCII, CSV, geoTiff, JSON and .netCDF. Since May 2018, over 10.4 TB of data have been delivered to fulfill over 110 million data requests from 240,000 unique user IPs (https://power.larc.nasa.gov). This presentation provides an overview of this project and the current version of the new POWER web capabilities through to the end usage. Surface solar parameters are adapted from both the NASA/GEWEX (Global and Energy Water Cycle Exchange) SRB (Surface Radiation Budget) project and the CERES (Clouds and Earth’s Radiant Energy System) data products. The meteorological parameters are adapted from NASA’s MERRA-2 (Modern Era Retrospective-analysis for Research and Applications). We review uncertainty of various basic parameters using surface measurements. After the introduction, we specifically discuss various clusters of parameters for equator pointing tilted surfaces that provide for the estimation of optimal tilt angle by month and year. The discussion will emphasize a few examples of how solar and building engineers are using the data products. We will then preview the capabilities of Version 2 featuring examples of hourly solar and meteorological data products, customized user reports and expanded web mapping services from CERES data products. The web services provide a unique, expandable resource for renewable energy systems engineers to design, evaluate and optimize to environments worldwide.

Solar Resource↗

Evaluation program for secondary spacecraft cells: Initial evaluation tests of General Electric Company 40.0 ampere-hour nickel-cadmium spacecraft cells for the tracking data relay satellite system

Five cells provided by NASA's Goddard Space Flight Center were evaluated at room temperature and pressure (25 C plus or minus 2 C) with discharges at the 2 hour rate. Measurements of the cell containers following test, indicated an average increase of .006 inches at the plate thickness. Average end of charge voltages and pressures, and capacity output in ampere hours were determined. Three cells exceeded the voltage requirements of 1.52 volts during both c/10 charges at 20 C. All cells exceeded the voltage requirement of 1.52 volts during the 0 C overcharge test, although their end charges were below 1.50 volts. The pressure requirement of 65 psia was exceeded by both pressure transducer cells during c/10 charges at 25 C and 20 C and also during the 0 C overcharge test. The cells with pressure transducers reached a pressure of 20 psia before reaching the voltage limit of 1.550 volts during the pressure versus capacity test, and exhibited a pressure decay of 2 psia during the last 30 minutes of the 1 hour open circuit stand. Average capacity was 51.3 ampere hours.

Harkness, J. D.↗