Search NASA⌕ Search

SEARCH · Search NASA

Results for “IP”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Characterization of Agfa Structurix series D4 and D3sc x-ray films in the 0.7–4.6 keV energy range

X-ray films remain a key asset for high-resolution x-ray spectral imaging in high-energy-density experiments conducted at the National Ignition Facility (NIF). The soft x-ray Opacity Spectrometer (OpSpec) fielded at the NIF has an elliptically shaped crystal design that measures x rays in the 900–2100 eV range and currently uses an image plate as the detecting medium. However, Agfa D4 and D3sc x-ray films’ higher spatial resolution provides increased spectral resolution to the data over the IP-TR image plates, driving the desire for regular use of x-ray film as a detecting medium. The calibration of Agfa D4 x-ray film for use in the OpSpec is communicated here. These calibration efforts are vital to the accuracy of the NIF opacity measurements and are conducted in a previously un-studied x-ray energy range under a new film development protocol required by NIF. The absolute response of Agfa D4 x-ray film from 705 to 4620 eV has been measured using the Nevada National Security Site Manson x-ray source. A broader range of energies was selected to compare results with previously published data. The measurements were taken using selected anodes, filters, and applied voltages to produce well-defined energy lines.

Dutra, E. C. (ORCID:0000000167649195)↗

Time dependent model for non-inductive ECH X-I current ramp-up for SHPD tokamak facility

Non-inductive (NI) plasma current start-up and ramp-up is an important research topic for spherical tokamak (ST) based reactors and fusion pilot plant (FPP). For a compact FPP, the OH flux availability is highly restricted due to its compact geometry. Efficient fundamental extraordinary mode (X-I) electron cyclotron heating (ECH) current start-up and ramp-up regime was identified for a reactor-like high toroidal magnetic field range which has more than a hundred times higher current drive efficiency compared to more conventional ECH methods for the relevant start-up temperature range. High current drive efficiency is possible due to the strong X-I fundamental ECH interaction only with unidirectional passing electrons constrained by the wave accessibility conditions. Here, we extend the X-I electron cyclotron current drive (ECCD) investigation to a time dependent model to simulate the non-inductive current ramp-up to 10 MA for the Sustained High-Power Density (SHPD) facility. As the X-I ECCD driven current I EC rises, due to the back EMF driven negative current, the net plasma current Ip rises more slowly with the current resistive time scale. For tokamak confinement time (both L-mode and H-Mode) which tends to rise with I p , a positive feedback results and even with constant applied ECH power, T e0 , I EC , and I p can continue to rise to very high values. However, in a realistic situation, the T e0 rise should saturate due to a number of factors such as enhanced core radiation and increased power loss at high temperature. To simulate this effect, we adopt a maximum T e0 model which would limit the temperature rise to certain T e0 . With this model, we investigated the current ramp-up for various ECH power levels and the maximum T e0 of 15, 20, and 25 keV. We find that while the power required is reduced with increasing T e0 limit due to increased current drive efficiency, the time to reach 10 MA tends to go up due to the reduced plasma resistivity for the higher T e0 limit. We also find for a given Te0 limit, the time to reach 10 MA tends to be reduced by increasing the applied ECH power by over driving the current ramp-up where I EC is driven at significantly higher level than 10 MA. While the current ramp-up time may not be an issue for the steady-state reactor systems, if it is desirable to minimize the current ramp-up time, it is prudent to have a sufficient ECH power for current over-drive and have some T e0 limiting tools such as impurity seeding for enhanced radiation. In conclusion, a well-controlled NI ECH start-up also has a potential of improving the tokamak start-up reliability and avoid run-away electrons while the NI off-axis current drive could enhance MHD stability and plasma performance improvements.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A comparison of QTP functionals against coupled-cluster methods for EAs of small organic molecules

EA-EOM-CCSD electron affinities and LUMO energies of various Kohn–Sham density functional theory (DFT) methods are calculated for an a priori IP benchmark set of 64 small, closed-shell molecules. The purpose of these calculations was to investigate whether the QTP KS-DFT functionals can emulate EA-EOM-CC with only a mean-field approximation. We show that the accuracy of DFT—relative to CCSD—improves significantly when elements of correlated orbital theory are introduced into the parameterization to define the QTP family of functionals. In particular, QTP(02), which has only a single range separation parameter, provides results accurate to a MAD of <0.15 eV for the whole set of 64 molecules compared to EA-EOM-CCSD, far exceeding the results from the non-QTP family of density functionals.

Chemistry↗

Simulating energetic ions and enhanced fusion rates from ion-cyclotron resonance heating with a full-wave/Fokker–Planck model

Reproducing fast-ion enhanced fusion rates from ion-cyclotron resonance heating (ICRH) in tokamaks requires the self-consistent coupling of a full-wave solver and a Fokker–Planck solver, which evolves multiple simultaneously resonant ion species. We introduce a new self-consistent model that iterates the TORIC full-wave solver with the CQL3D Fokker–Planck solver using the integrated plasma simulator (IPS). This model evolves the bounce-averaged ion distribution functions in both parallel and perpendicular velocity-space with a quasilinear radio frequency (RF) diffusion operator valid in the ion finite Larmor radius (FLR) limit and the RF electric fields with the resultant non-Maxwellian FLR dielectric tensor. This produces non-Maxwellian ICRH simulations that are fully self-consistent, fast, and interoperable with integrated modeling frameworks, such as TRANSP/GACODE/IPS-FASTRAN. We demonstrate our model's capabilities by validating it against experimental data in Alcator C-Mod. We then perform the first RF heating simulations of SPARC using self-consistent non-Maxwellian ion distributions to investigate the potential to enhance fusion rates using ion cyclotron resonance heating generated fast ions.

Physics↗

Crystal structure of type I ryanodine receptor amino-terminal [beta]-trefoil domain reveals a disease-associated mutation 'hot spot' loop

Muscle contraction and relaxation is regulated by transient elevations of myoplasmic Ca{sup 2+}. Ca{sup 2+} is released from stores in the lumen of the sarco(endo)plasmic reticulum (SER) to initiate formation of the Ca{sup 2+} transient by activation of a class of Ca{sup 2+} release channels referred to as ryanodine receptors (RyRs) and is pumped back into the SER lumen by Ca{sup 2+}-ATPases (SERCAs) to terminate the Ca{sup 2+} transient. Mutations in the type 1 ryanodine receptor gene, RYR1, are associated with 2 skeletal muscle disorders, malignant hyperthermia (MH), and central core disease (CCD). The evaluation of proposed mechanisms by which RyR1 mutations cause MH and CCD is hindered by the lack of high-resolution structural information. Here, we report the crystal structure of the N-terminal 210 residues of RyR1 (RyR{sub NTD}) at 2.5 {angstrom}. The RyR{sub NTD} structure is similar to that of the suppressor domain of type 1 inositol 1,4,5-trisphosphate receptor (IP3Rsup), but lacks most of the long helix-turn-helix segment of the 'arm' domain in IP3Rsup. The N-terminal {beta}-trefoil fold, found in both RyR and IP{sub 3}R, is likely to play a critical role in regulatory mechanisms in this channel family. A disease-associated mutation 'hot spot' loop was identified between strands 8 and 9 in a highly basic region of RyR1. Biophysical studies showed that 3 MH-associated mutations (C36R, R164C, and R178C) do not adversely affect the global stability or fold of RyRNTD, supporting previously described mechanisms whereby mutations perturb protein-protein interactions.

36 MATERIALS SCIENCE↗

Availability of Critical Benchmark Experiments for the Pebble Tanker Transportation Model for Nuclear Criticality Safety Validation of TRISO Pebbles

This study addresses the need for comprehensive investigations into TRi-structural ISOtropic (TRISO) fuel pebble transportation validation. In this work, an exploratory model, the pebble tanker(PT), was developed with the aim of facilitating the validation of nuclear criticality safety calculations in the context of industrial-scale transportation of TRISO fuel. The PT model was designed to investigate the availability and applicability of critical benchmark experiments crucial for assessing the transportation of these pebbles. This work incorporated sensitivity/uncertainty (S/U) similarity studies to quantify the applicability of critical benchmark experiments and to address nuclear data uncertainties in the context of TRISO transportation. Two container models were investigated: one for the Hermes-type pebble and one for the Pebble Bed Modular Reactor (PBMR)–type pebble. The models were simplified, considering fuel, containment, and either water or air, to enable a focus on the underlying physics of applications involving TRISO fuel pebbles using the PT model. A crucial aspect under consideration was the capacity of the transport package to hold pebbles while ensuring subcriticality in the flooded state. An approach in the criticality validation process involves assessing the similarity between systems through an integral index parameter evaluation. This involves calculating a correlation coefficient (referred to as c k ) based on shared nuclear data–induced uncertainty between a benchmark experiment and the application of the PT model. To facilitate this analysis, the SCALE tools, particularly the CSAS6-Shift, TSUNAMI-3D-Shift, and TSUNAMI-IP sequences, were employed for comprehensive studies in neutronics and S/U analysis. Our findings showed that there are sufficient critical experimental benchmarks to perform this validation of the PT model in the most reactive state, i.e. when the tanker is flooded. This paper provides valuable insights into validating a transport package for Generation IV TRISO fuel pebbles.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Cryogenic and Temperature-Dependent Photoelectron Spectroscopy of Metal Complexes

Negative ion photoelectron spectroscopy (NIPES) coupled with electrospray ionization (ESI) has been proved to be a powerful gas-phase spectroscopic tool for characterizing electronic structures and chemical bonding of a variety of cluster anions and corresponding neutral radicals involved in the condensed phase reactions and transformations. Since the acquisition of cryogenic and temperature-controlling capabilities, broader range of research scope has been covered. This review summarizes our recent investigations on metal complexes employing cryogenic ESI-NIPES that provide us essential information towards understanding complicated condensed phase reactions including hydrocarbon activations and electron transfer reactions, and afford us spectroscopic probe of highly reactive transient species and intimate redox pairs. Special attention has been drawn to connect gas phase photodetachment processes with solution phase redox reactions. Photodetachment of transition metal-EDTA complexes has been systematically investigated to model the sequential oxidation reactions of these species in solutions. The obtained gas phase electron affinity (EA) is compared with the solution redox potential (E1/2) and the metal ionization potential (IP) for several series of homologous metal complexes to emphasize their intrinsic correlations with deviations being largely modulated by different degrees of ligand participations.

Yuan, Qinqin↗

Equilibrium and transport for quasi-helical reversed field pinches

This paper presents the most recent results in theoretical/numerical studies on the physics of the quasi-helical regime in reversed field pinch (RFP) configurations. Such regime systematically characterizes RFX-mod experiments at high currents (Ip > 1.2 MA), producing clear internal electron transport barriers. Several approaches, ranging from a macroscopic (MHD) to a microscopic (transport) description, have been used to tackle the related complex physics. From the macroscopic point of view, we derive analytically the electrostatic velocity field consistent with a generic helical ohmic equilibrium. We also provide the first MHD initial-value simulation results in toroidal geometry obtained with the PIXIE3D code. Concerning transport, the effect of magnetic chaos healing by mode separatrix expulsion, believed to favour the formation of transport barriers, is discussed. Results indicate that helical equilibria originated by non-resonant modes are more resilient to chaos formation. Finally, gyrofluid and gyrokinetic tools have been used towards a first assessment of the role of microturbulence in the RFP. Concerning the electrostatic branches, ion temperature gradient mode stability is robustly improved in RFP with respect to tokamaks, due to stronger Landau damping effects, and the marginality condition is estimated to be only spottily reached in present experimental regimes, unless the effects of impurities are considered. Impurities, which in RFX-mod accumulate in the edge, may also significantly impact the stability of the impurity-driven modes. On the electromagnetic side, microtearing turbulence is found to probably play a role at the transport barriers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The High Luminosity LHC interaction region magnets towards series production

The High Luminosity Large Hadron Collider (HL-LHC) is the new flagship project of CERN. First endorsed in 2013 and approved in 2016, HL-LHC is an upgrade of the accelerator aiming to increase by a factor of ten the statistics of the LHC collisions at the horizon of 2035-2040. HL-LHC relies on cutting edge technologies: among them, large aperture superconducting magnets will replace the present hardware to allow a smaller beam size in two interaction points (IPs). The project involves the construction of about 150 magnets of six different types: the quadrupole triplet, two main dipoles and three orbit correctors. The triplet, manufactured at CERN and in the USA, will consist of 30 magnets based on Nb3Sn technology, with an operational peak field of 11.4 T. These will be the first quadrupole Nb3Sn magnets installed in a particle accelerator. The other five types of magnets, all relying on Nb-Ti technology, present non-trivial challenges in the design and construction; they will be manufactured as part of in-kind contribution under the responsibility of institutes in Japan, China, Spain, and Italy. The project is now in the phase of transition between qualification through short models and prototypes and the beginning of the series construction. In this paper we review the magnet requirements, the reasons for selecting the design, the technological challenges with respect to previous projects, and we summarize the steps that have been taken to validate the baseline.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Grassy-ELM regime with edge resonant magnetic perturbations in fully noninductive plasmas in the DIII-D tokamak

Resonant magnetic perturbations (n=3 RMPs) are used to eliminate large amplitude ELMs and reduce the amplitude of weaker "grassy"-ELMs in DIII-D plasmas relevant to the ITER steady-state mission. Fully non-inductive discharges in the ITER shape and pedestal collisionality (n*e ≈ 0.05-0.15) are routinely achieved in DIII-D with RMP suppression of Type-I ELMs. The residual grassy-ELMs deliver a low peak heat flux to the divertor, within 50% of the inter-ELM heat flux, in plasmas with sustained high H-factor (H98y2≈1.2). These grassy-ELM plasmas have a pedestal width that is typically 10% of the poloidal minor radius and ≈50% wider than EPED model predictions. The operating window for RMP grassy-ELMs in edge magnetic safety factor and external torque is in the range required for a steady-state tokamak reactor, such as q95 between 5.3 and 7.1, and co-Ip neutral beam torque down to 0.7 Nm. Small amplitude RMPs (dBvac/B≈1.5x10-4) are sufficient to access this regime, consistent with the large amplification of the vacuum field by the plasma, typically 3-4x the amplification produced by ITER baseline plasmas due to the high pedestal pressure. Cyclic pulsations are observed in the pedestal and plasma magnetic response, consistent with theoretically predicted limit cycle behavior of magnetic island penetration and screening. The grassy ELMs are strongly modulated and sometimes fully suppressed during these pedestal pulsations, consistent with the stabilizing effect of resonant field penetration on peeling-ballooning mode stability. The use of low amplitude edge-resonant magnetic perturbations to access enhanced grassy-ELM operation in a naturally wide pedestal plasma with weak confinement degradation opens the possibility for further optimization of the steady-state tokamak by improved coupling between external fields and weakly stable modes of the plasma.

43 PARTICLE ACCELERATORS↗

Experimental study of high-k turbulence during an energy confinement degradation phase in EAST ohmic plasmas

In this paper, we present experimental studies of both high-k(r) ( cm(-1), and , respectively; ) and high- ( cm(-1), and , respectively; ) turbulence behavior during an ohmic energy confinement degradation phase in experimental advanced superconducting tokamak (EAST). High-k(r) turbulence from density fluctuation at and high- turbulence from density fluctuation at -0.97 were measured by tangential and poloidal CO2 laser collective scattering diagnostics, respectively. Note that k(r), , and are radial wavenumber, poloidal wavenumber, perpendicular wavenumber and ion gyroradius at electron temperature, respectively. Both high-k(r)/ turbulence power and energy confinement time are found to be temporally correlated to line-averaged electron density n(e) in the plasma current flat-top phase (I-p = 0.4 MA): when the n(e) shows continuous increase/decrease, the high-k(r)/ turbulence power increases/decreases correspondingly and the shows corresponding decrease/increase; the stable n(e) is related to stable both and high-k(r)/ turbulence power. Statistical results of high-k(r)/ turbulence power versus further imply that high-k(r)/ turbulence shows a strong correlation with plasma energy confinement degradation in high line-averaged n(e) condition, but high-k(r) and high- turbulence have relatively weak and no dependence on the transition between linear range in low-n(e) condition and energy confinement degradation in the high-n(e) condition, respectively. Moreover, profiles of electron temperature T-e and n(e) as well as their normalized gradients in a part of high- density fluctuation measurement region also have been given to qualitatively explain the enhancement of turbulence power with the increase of line-averaged n(e).

EAST tokamak↗

Energetic particle-induced geodesic acoustic modes on DIII-D

Various properties of the energetic particle-induced geodesic acoustic mode (EGAM) are explored in this large database analysis of DIII-D experimental data. EGAMs are n = 0 modes with m = 0 electrostatic potential fluctuations (where n/m = toroidal/poloidal mode number), m = 1 density fluctuations, and m = 2 magnetic fluctuations. The fundamental frequency (~20–40 kHz) of the mode is typically below that of the traditional geodesic acoustic mode frequency. EGAMs are most easily destabilized by beams in the counter plasma current (counter-I p ) direction as compared to co-Ip and off-axis beams. During counter beam injection, the mode frequency is found to have the strongest linear dependence (correlation coefficient r = –0.71) with the safety factor (q). Here, the stability of the mode in the space of q and poloidal beta (β p ) shows a clear boundary for the mode stability. The stability of the mode depends more strongly on damping rate than on fast-ion drive for a given injection geometry.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Next generation experimental data access at NSLS-II

The NSLS-II network and computing infrastructure has been significantly updated recently. The re-IP process in 2020-2021 enabled the NSLS-II network to be routable to the rest of the BNL campus. Then, standardization of the operating systems and deployment procedures helped to deliver a consistent environment to workstations and servers used by all NSLS-II beamlines. In particular, the RedHat Enterprise Linux 8 was deployed to 700+ machines using the RedHat Satellite infrastructure management product, and all critical services (IOCs, databases, etc.) were migrated to the new OS. NFS users’ home directories are consistent across all of the machines, which eliminates the need for the individual configuration of the user environment on each host. The standard suite of software packages is available to the beamline staff and users, which includes the system packages (deployed via RPM) as well as the conda environments for data acquisition and analysis. Security measures were implemented to comply with the industry standards, which include multi-factor authentication (using Duo), secure screen lock for the beamline machines, and advanced access control to the experimental data that is stored in shared central storage available on all hosts. These major enhancements facilitated sharing the experimental data (currently for a number of selected beamlines, with a plan to extend it to the whole facility in the nearest future) with the users via an externally facing JupyterHub instance. The beamlines keep using the Bluesky data acquisition framework to orchestrate their experiments, and the new infrastructure enabled them to use a next-generation data access library called tiled.

36 MATERIALS SCIENCE↗

Studies of future readout links for the CMS experiment

The Compact Muon Solenoid (CMS) experiment has developed an electrical implementation of the S-LINK64 extension (Simple Link Interface 64 bit) operating at 400 MB/s in order to read out the detector. This paper studies a possible replacement of the existing S-LINK64 implementation by an optical link, based on 10 Gigabit Ethernet in order to fulfil larger throughput, replace aging hardware and simplify an architecture. A prototype transmitter unit has been developed based on the FPGA Altera PCI Express Development Kit with a custom firmware. A standard PC has been acted as receiving unit. The data transfer has been implemented on a stack of protocols: RDP over IP over Ethernet. This allows receiving the data by standard hardware components like PCs or network switches and NICs. The first test proved that basic exchange of the packets between transmitter and receiving unit works. The paper summarizes the status of these studies.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Optimization on fixed low latency implementation of the GBT core in FPGA

We present that in the upgrade of ATLAS experiment, the front-end electronics components are subjected to a large radiation background. Meanwhile high speed optical links are required for the data transmission between the on-detector and off-detector electronics. The GBT architecture and the Versatile Link (VL) project are designed by CERN to support the 4.8 Gbps line rate bidirectional high-speed data transmission which is called GBT link. In the ATLAS upgrade, besides the link with on-detector, the GBT link is also used between different off-detector systems. The GBTX ASIC is designed for the on-detector front-end, correspondingly for the off-detector electronics, the GBT architecture is implemented in Field Programmable Gate Arrays (FPGA). CERN launches the GBT-FPGA project to provide examples in different types of FPGA. In the ATLAS upgrade framework, the Front-End LInk eXchange (FELIX) system is used to interface the front end electronics of several ATLAS subsystems. The GBT link is used between them, to transfer the detector data and the timing, trigger, control and monitoring information. The trigger signal distributed in the down-link from FELIX to the front-end requires a fixed and low latency. In this paper, several optimizations on the GBT-FPGA IP core are introduced, to achieve a lower fixed latency. For FELIX, a common firmware will be used to interface different front-ends with support of both GBT modes: the forward error correction mode and the wide mode. The modified GBT-FPGA core has the ability to switch between the GBT modes without FPGA reprogramming. Finally, the system clock distribution of the multi-channel FELIX firmware is also discussed in this paper.

47 OTHER INSTRUMENTATION↗

Mechanisms of a coniferous woodland persistence under drought and heat

Predictions of warmer droughts causing increasing forest mortality are becoming abundant, yet fewer studies have investigated the mechanisms of forest persistence. To examine the resistance of forests to warmer droughts, we used a five-year precipitation reduction (~45% removal), heat (+4°C above ambient) and combined drought and heat experiment in an isolated stand of mature Pinus edulis-Juniperus monosperma . Despite severe experimental drought and heating, no trees died, and we observed only minor evidence of hydraulic failure or carbon starvation. Two mechanisms promoting survival were supported. First, access to bedrock water, or ‘hydraulic refugia’ aided trees in their resistance to the experimental conditions. Second, the isolation of this stand amongst a landscape of dead trees precluded ingress by Ips confusus , frequently the ultimate biotic mortality agent of piñon. These combined abiotic and biotic landscape-scale processes can moderate the impacts of future droughts on tree mortality by enabling tree avoidance of hydraulic failure, carbon starvation, and exposure to attacking abiotic agents.

54 ENVIRONMENTAL SCIENCES↗

A ROLE OF MAGNETOSONIC PULSES ON VARIATIONS OF VOYAGER-1 MeV ELECTRON INTENSITY IN THE HELIOSHEATH

Voyager 1 (V1) spacecraft observed electrons of 6-14 MeV in the heliosheath which showed several enhancements of significant flux variation. We compare these temporal electron flux variations, from the time when V1 crossed the termination shock (TS) up to mid-2008, with dynamical phenomena in the heliosheath that are obtained from our MHD simulations which are based on Voyager 2 (V2) observed solar-wind data. Our simulations indicate that all electron flux enhancements, except for one, correspond fairly well to the times when a magnetosonic (MS) pulse was driven downstream of the TS due to collision of interplanetary shock (IPS) or shock-driven MS pulse and its reflection in the heliosheath that either passed V1, or collided with the TS or with the plasma sheet near the heliopause (HP). This result suggests that these enhancements in the electron flux should correspond to either direct or indirect effects of MS pulses in the heliosheath driven by IPSs. The scale of the heliosphere is estimated by comparing V1-observed magnetic field intensity with the simulated intensity which suggests that V1 is possibly located near the HP within 4-8 AU at the present time.

79 ASTRONOMY AND ASTROPHYSICS↗

Increased SUMOylation of TCF21 improves its stability and function in human endometriotic stromal cells

Abstract Endometriosis is an estrogen-dependent disease. Our previous study demonstrated that elevated levels of transcription factor 21 (TCF21) in endometriotic tissues enhanced steroidogenic factor-1 (SF-1) and estrogen receptor β (ERβ) expression by forming a heterodimer with upstream stimulatory factor 2 (USF2), allowing these TCF21/USF2 complexes to bind to the promoters of SF-1 and ERβ. Furthermore, TCF21 contributed to the increased proliferation of endometriotic stromal cells (ESCs), suggesting that TCF21 may play a vital role in the pathogenesis of endometriosis. SUMOylation is a posttranslational modification that has emerged as a crucial molecular regulatory mechanism. However, the mechanism regulating TCF21 SUMOylation in endometriosis is incompletely characterized. Thus, this study aimed to explore the effect of TCF21 SUMOylation on its expression and regulation in ovarian endometriosis. We found that the levels of SUMOylated TCF21 were increased in endometriotic tissues and stromal cells compared with eutopic endometrial tissues and stromal cells and enhanced by estrogen. Treatment with the SUMOylation inhibitor ginkgolic acid (GA) and the results of a protein half-life assay demonstrated that SUMOylation can stabilize the TCF21 protein. A coimmunoprecipitation (Co-IP) assay showed that SUMOylation probably increased its interaction with USF2. Further analyses elucidated that SUMOylation of TCF21 significantly increased the binding activity of USF2 to the SF-1 and ERβ promoters. Moreover, the SUMOylation motifs in TCF21 affected the proliferation ability of ESCs. The results of this study suggest that SUMOylation plays a critical role in mediating the high expression of TCF21 in ESCs and may participate in the development of endometriosis.

Zhu, Jingwen↗