Search NASA⌕ Search

SEARCH · Search NASA

Results for “Infiltration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

The Role of Interface in Additively Manufactured Interpenetrating Composites

Additively Manufactured Interpenetrating Composites (AMIPCs) are a relatively new metal-metal chain composite in development for use in high energy absorption systems. In this system, reinforcing phase of additively manufactured continuous lattice configurations 316L austenitic stainless-steel is in melt infiltrated with a matrix phase of A356 aluminum-silicon casting alloy. Measurements and observations of this material system have shown that weakly bonded or open/porous interface between the reinforcement and matrix phases exhibits dramatically different mechanical properties of AMIPCs, which is not currently well understood. In this work, Finite Element Models (FEM) are used to model the effects of interfaces between the composite phases. Mechanical tensile tests measurements of various composite volume fractions and varying degrees of casting infiltration are also examined and used to show consistency with the FEM results. The outcome provides insight into material design criteria and performance predictions for new hybrid material systems with exceptional damage tolerance.

Allen, Jason↗

Slides for MS&T2022: Carbon-Carbon Composites from 3D Printed Preforms Graphitized by Electric Field Assisted Sintering

Formation of Carbon-Carbon (C-C) composite materials requires putting a carbon fiber preform through a cycle of densification, carbonization, and graphitization. This cycle is then repeated until the desired properties are achieved. The graphitization phase is particularly energy demanding as it involves heating the components to in excess of 2000°C. In traditional furnaces this is also quite time consuming as typical heating rates are low, and the actual heat treatment may be limited by component dimensions, as heat is conducted throughout the part primarily by thermal diffusion. Joule heating by means of Electric Field Assisted Sintering (EFAS) systems enables high heating rates and causes the part to be heated from the inside, which eliminates the thermal diffusion time constraint. In our process, C-C composites are formed by pyrolyzation of 3D-printed carbon fiber preforms, vacuum infiltration of naphthalene based mesophase pitch, and carbonization. The part is then graphitized in the EFAS system. By this method graphitization of the composite matrix was achieved in less than an hour. A part density of greater than 1.6g/cc (up to 1.9g/cc demonstrated) was achieved after only two rounds of infiltration and a single graphitization. Overall the process took less than a week which is significantly faster than traditional methods. Optical microscopy and XRD results are discussed to elucidate the internal porosity and characterize the degree of graphitization. Testing was performed showing the impact on fiber direction to electrical and thermal properties of the final part.

36 MATERIALS SCIENCE↗

Results from Laboratory and Field Study of Thin Triple Pane Windows

Heat transfer through windows accounts for a significant percentage of a building’s energy use and adds substantially to the peak cooling load of a home. In recent years, improvements in glass manufacturing have enabled the use of a very thin central pane of glass similar to a cell phone screen to produce a thin triple-pane window, for finished insulated glass units (IGUs) with an overall thickness similar to standard double-pane windows. Because this highly insulating “thin triple” glass product can be incorporated into almost any existing window frame and can be fabricated at a modest added cost, the U.S. Department of Energy sponsored laboratory and field demonstration testing of thin triple-pane windows to validate thermal performance and installation requirements in real-life field settings. Thin triple pane windows were evaluated at the PNNL Lab Homes, a matched pair of manufactured houses located on PNNL’s campus in Richland, Washington and also at 16 different field study sites around the country. The experimental results include a comparison of heating, ventilation, and air-conditioning (HVAC) energy usage, condensation potential, occupant comfort, sound infiltration, and thermal performance. Field study data will be gathered through June of 2022; preliminary results are being shared in this paper. The lab houses are identical except that the reference house had standard double pane windows with assembly U-0.66 and the test house had thin triple pane windows with assembly U-0.19. Across the experimental test days, the daily HVAC savings ranged from 0.2 to 18.7 kWh (3%–18%) for the heating season and from 2.5 to 8.0 kWh (23%–41%) for the cooling season. The higher thermal performance of the thin triple-pane windows also reduced the condensation potential on the interior surface during winter months and provided more even distribution of temperatures throughout the home in comparison to the baseline. In addition to the added thermal performance, the thin triple-pane windows demonstrated significant acoustic benefits, reducing sound infiltration by 8 dB to 10 dB. For the field test portion of the project thin triple pane insulated glass units were produced by two different manufacturers, and then installed without modification into the ½” IGU pockets of the standard double pane frames of four other manufacturers. Field tests performed on existing homes in Washington, Montana, Colorado, and New York compared thin triple pane retrofits to original window conditions (before and after). Field tests at new construction sites in Minnesota, Michigan, and New York compared thin triple pane windows to commercially available solutions such as double pane or traditional triple pane (with a standard-thickness center pane). Field test work is ongoing, but preliminary results appear to follow the sound, surface temperature, and energy improvement results from the Lab Homes comparison. Additionally, reports from builders and installers indicate that thin triples require almost no added time or effort to install and look nearly identical to other windows, indicating the possibility of offering next-level performance with a product that requires very little modification to current production or installation practices, long considered a major barrier to technology uptake in the construction market.

energy efficiency, home retrofit, Windows, window ↗

Conceptual Design for a Short-Lived Low- and Intermediate-Level Waste Repository at the Al Tuwaitha Nuclear Center, Baghdad, Iraq - 17189

The European Commission under their Instrument for Nuclear Safety Cooperation (INSC) has initiated a project supporting Iraq's efforts for the safe disposal of short lived low- and intermediate-level radioactive waste (SL-LILW) arising from the decommissioning of Iraqi nuclear installations. The INSC project includes both the development of an initial conceptual level basic design and preliminary safety assessment (PSAR) report and the subsequent detailed engineering design and supporting intermediate safety assessment report (ISAR). The project is being executed by a Consortium led by NUKEM Technologies Engineering Services GmbH and joined by DBE Technology GmbH of Germany; JAVYS a.s. of Slovakia and MCM Environmental Services Ltd of the United Kingdom. The current paper focuses on the development of the conceptual level basic design. In previous decades Iraq had a significant nuclear program which encompassed ten nuclear sites spread out across the country. The largest site was located at the Al-Tuwaitha site near Baghdad where 18 nuclear facilities were located. The facilities suffered significant damage from bombing and subsequent looting during the first Gulf War in 1991. Currently, the Ministry of Science and Technology (MoST) is the radioactive waste management operator in Iraq and also the license holder for the ten Iraqi nuclear sites, all of them heavily damaged. Because of the ongoing security concerns in Iraq MoST has selected the Al Tuwaitha Nuclear Center as the preferred and best suited location for development of an SL-LILW repository. As an initial step in development of the conceptual design various repository design options for the site were examined and assessed. The assessment considered similar facilities that have been implemented internationally. At the conclusion of the assessment and in conjunction with the Iraqi Beneficiaries from MoST, a near-surface vault design was selected for the facility. The design of the facility relies on experience gained from existing low-level waste repositories at Centre de l'Aube in France and the El Cabril solid radioactive waste disposal facility in Spain as well as on more recent experience gained in the design of the Bulgaria National Disposal Facility (NDF) under construction near the Kozloduy Nuclear Power Plant. Similar to these reference designs, the concept for the Al Tuwaitha Disposal Facility (ATDF) will rely on a series of reinforced concrete vaults into which containerised waste will be placed. Each vault will consist of two chambers designed specifically to hold the waste. Central drainage points in each waste chamber will lead to an infiltration water collection system designed to detect any failures in the waste containment. Each disposal vault will be sealed after filling by installation of a reinforced concrete closure slab. Once all of the waste has been disposed of the site will be decommissioned and a multilayer protective cover will be installed over the sealed disposal vaults. The multilayer cover will act to further isolate the waste from the environment by limiting the access of water to the waste. Due in part to the presence of shallow groundwater at the site and to avoid potential damage to the facility by flooding from the nearby Tigris River the concept for the Al Tuwaitha Disposal Facility requires construction of the disposal vaults on a raised platform several meters above ground level. Construction of this platform will be integrated into the conceptual safety design and materials will be selected which further enhance the isolation function of the disposal system by hindering or delaying the release of radionuclides to the environment. The infiltration water collection system, which will be constructed in a specifically designed accessible gallery embedded and fully integrated into the platform, will provide access to inspection points located beneath each disposal chamber. The ATDF when completed will be a further demonstration of the adaptability of the disposal vault concept for use in isolating SL-LILW from the environment. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Vadose zone monitoring at the radioactive waste management sites at the Nevada national security site - 15294

Two lysimeter facilities continuously monitor the vadose zone at the radioactive waste disposal sites at the Nevada National Security Site. The time-series data collected at these facilities support the performance assessments of the radioactive waste disposal sites, the closure cover designs, and the long-term monitoring decisions for these sites. The Weighing Lysimeter Facility at the Area 5 Radioactive Waste Management Site (RWMS) consists of a bare-soil weighing lysimeter and a vegetated weighing lysimeter. The upper surfaces of both weighing lysimeters are exposed to precipitation. The Drainage Lysimeter Facility at the Area 3 RWMS includes bare-soil lysimeters that receive precipitation or precipitation supplemented with irrigation equal to double precipitation and vegetated lysimeters that have the same upper boundary conditions as the bare-soil lysimeters. Lysimeter sensors are connected to data-loggers that are accessed remotely for data acquisition. Lysimeter water balance measurements show the arid climate and native vegetation at the NNSS provide a natural sustainable system to effectively prevent transport of contaminants from the RWMSs through the vadose zone to groundwater. Transport by infiltration and percolation of present day precipitation at the RWMSs is prevented. The native desert vegetation is adapted to extract moisture from very dry soils and maintains negative matric potentials at the base of the root zone effectively buffering the deep vadose zone from episodic precipitation events at the surface. The very negative matric potential at the base of the root zone effectively intercepts all infiltration from precipitation and draws moisture upward from the vadose zone below the root zone. This system is sustainable because it does not rely on engineered features and mimics the stable landscapes and no groundwater recharge of the current condition surrounding the RWMSs. The system depends on establishing native vegetation in the covers above the waste cells and a stable climate. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Natural and Engineered Features Supporting Environmental Performance of Idaho National Laboratory's Remote-Handled Low-Level Waste Disposal Facility - 19436

The Idaho National Laboratory's (INL's) Remote-Handled Low-Level Waste (RH LLW) Disposal Facility has been designed and constructed to receive waste generated at the INL site in support of the US DOE Office of Nuclear Energy (NE) and Naval Reactors (NR) missions. The facility has been designed to receive legacy RH LLW currently in storage at INL facilities and new waste generated by nuclear research programs. RH LLW to be received at the facility is solid waste consisting of surface contaminated materials; ion exchange resins used to purify cooling and canal water; and activated metal components generated during reactor core change outs and Naval spent fuel management; and nuclear R and D. Disposal of INL's RH LLW poses unique disposal challenges due to high radiation levels (contact rates up to 600 Sv/hr [60,000 Rem/hr]) that require remote handling and adequate shielding for transportation and disposal. The facility has been designed to meet the requirements of DOE Order 435.1, Radioactive Waste Management, including the all-pathways dose, air pathway dose, inadvertent intruder doses, and radon emissions limits. This paper presents an overview of natural and engineered design features that support the safety case and enhance the environmental performance of the facility. These features include location selection, use of reinforced pre-cast concrete vaults; a robust hydraulic drainage system; use of steel waste canisters for waste disposal; the facility monitoring system; facility layout; and crediting waste forms. The facility performance assessment (PA) developed to meet the requirements of DOE Order 435.1, credits each of these protective features. Releases from waste forms disposed of at this facility are limited by corrosion of the steel waste canisters which will ultimately allow contact with infiltrating water followed by transport of radionuclides from the vault system. The steel waste canisters were credited for their ability to limit water contact with the waste based on the demonstrated ability of the reinforced pre-caste concrete vaults to provide long-term structural protection of the steel waste canisters. Verification of hydraulic and concrete performance was conducted through laboratory data, field infiltration tests supported by a robust monitoring system, and numerical modeling. Releases into the vault system from activated metals are based on site-specific corrosion data. Radionuclide transport from the vault system from all waste forms is based on site-specific climatological, hydrologic, and stratigraphic data. At INL, the groundwater pathway historically and appropriately has received the most attention. By crediting aspects of the natural system, the engineered vault system, and the waste, estimated radiologic doses via the groundwater pathway are minimal. Air pathway doses were reduced by differentially crediting corrosion of aluminum and stainless steel activated metals resulting in the pathway being screened out of the PA. Groundwater and inadvertent intruder doses were reduced through selective facility layout. This paper provides an overview of the system-wide protective features incorporated into the facility design along with an extensive reference list to supporting technical papers and analyses that provide data and interpretation. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Analysis of Hydrology and Interim Measure Performance in the Chromium Plume at Los Alamos National Laboratory - 20498

Hexavalent chromium, Cr(VI), is present in the regional aquifer beneath Los Alamos National Laboratory (LANL) at concentrations greater than the New Mexico groundwater standard (50 ppb). The source of the Cr is blowdown from a power plant where potassium dichromate was used as a corrosion inhibitor from 1956 to 1972. Blowdown comingled with effluent from another source and migrated approximately 3 miles down a canyon, primarily as surface flow, until reaching an alluvial infiltration zone. The infiltrating water moved vertically through a thick (approximately 900 ft), complex stratigraphic sequence of unsaturated tuffs, basalt, and unconsolidated alluvial deposits. Horizontal transport also took place within spatially limited perched groundwater horizons in the vadose zone (VZ). Breakthrough at the regional aquifer water table is thought to have occurred in multiple hydraulic windows or 'drip points' located approximately 3 miles from the initial release site at the power plant. The regional aquifer is highly heterogeneous and anisotropic, and displays unconfined behavior in an upper zone and confined behavior at depth. The Cr(VI) contamination has so far remained confined to the upper approximately 25 m of the aquifer. The ambient hydraulic gradient in the regional aquifer is toward the east/southeast, but the water table is extremely flat in the Cr plume area compared to surrounding areas. There is some local variability in flow direction, potentially related to effects of seasonal pumping from nearby Los Alamos county water-supply wells, which draw from the regional aquifer several hundred feet below the water table. An interim measure (IM) is currently operating at the site to achieve hydraulic control of plume migration using a series of extraction wells, ion-exchange treatment, and injection along the downgradient portion of the plume. The migration of Cr contamination in the aquifer has been previously evaluated using a calibrated probabilistic numerical model, which has also been used to design the spatial configuration of extraction and injection wells for the IM, and to identify locations for monitoring wells. The model is built using the Finite Element Heat and Mass (FEHM) transfer code, and the Model Analysis and Decision Support (MADS) software is used for analyses. To date, the portion of the IM system that has operated in a continuous manner has been very effective at hydraulic control. Modifications to the flow field associated with the influence of IM pumping and injection are evaluated here, with modeling constraints to be provided by recent observations of tracers injected into both monitoring wells and IM injection wells, as well as opportunistic observations of geochemical signatures of treated ion-exchange effluent injected into IM injection wells. The tracer and geochemical data provide insights into modified flow directions within the Cr plume area that cannot be otherwise obtained. Results of the modeling work are being used to inform adaptive management of IM operations and will be a valuable tool for development and refinement of long-term remediation strategies. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

From Chills to Thrills: Revolutionizing Energy Efficiency and Load Flexibility in Supermarket Refrigeration

Open-vertical medium-temperature refrigerated display cases comprise nearly 50% of total case lineups in a typical supermarket, with more than 80% of their cooling load attributed to infiltration of warm and moist air from the surrounding space. The infiltration takes place across the air curtain system of the display case. While the air curtain acts as a thermal shield and as a cooling mechanism to maintain product temperature, it also entrains large amounts of heat and moisture from the adjacent space. Additionally, from food safety and quality standpoints, these fixtures are vulnerable to electric outages and traditionally cannot participate in load flexibility events. This paper describes key features of an innovative design of a self-contained, water-cooled, medium-temperature, open-vertical display case. The novel concept will eliminate the inefficient air curtain system and incorporate a hybrid radiant and low-airflow convective cooling design with a thermal-energy-storage-coupled heat exchanger integrated into the refrigeration circuit. The focus of this paper is on evaluating the thermal performance of the novel hybrid design in maintaining target product temperature. It presents thermal performance findings from thermo-fluid system modeling and robust state-of-the-art laboratory experiments used to validate those models. Load flexibility attributes from thermal energy storage are not discussed. A controlled-environment chamber at the National Renewable Energy Laboratory was leveraged to validate the thermal performance of the novel technology. Final results from bench-scale experiments indicate the proposed design maintained mean product temperatures within food safety guidelines.

commercial refrigeration↗

From Chills to Thrills: Revolutionizing Energy Efficiency and Load Flexibility in Supermarket Refrigeration: Preprint

Open-vertical medium-temperature refrigerated display cases comprise nearly 50% of total case lineups in a typical supermarket, with more than 80% of their cooling load attributed to infiltration of warm and moist air from the surrounding space. The infiltration takes place across the air curtain system of the display case. While the air curtain acts as a thermal shield and as a cooling mechanism to maintain product temperature, it also entrains large amounts of heat and moisture from the adjacent space. Additionally, from food safety and quality standpoints, these fixtures are vulnerable to electric outages and traditionally cannot participate in load flexibility events. This paper describes key features of an innovative design of a self-contained, water-cooled, medium-temperature, open-vertical display case. The novel concept will eliminate the inefficient air curtain system and incorporate a hybrid radiant and low-airflow convective cooling design with a thermal-energy-storage-coupled heat exchanger integrated into the refrigeration circuit. The focus of this paper is on evaluating the thermal performance of the novel hybrid design in maintaining target product temperature. It presents thermal performance findings from thermo-fluid system modeling and robust state-of-the-art laboratory experiments used to validate those models. Load flexibility attributes from thermal energy storage are not discussed. A controlled-environment chamber at the National Renewable Energy Laboratory was leveraged to validate the thermal performance of the novel technology. Final results from bench-scale experiments indicate the proposed design maintained mean product temperatures within food safety guidelines.

commercial refrigeration↗

Grid Interactive Micro-Distributed Refrigerated Display Case

Open-vertical medium-temperature refrigerated display cases comprise nearly 50% of total case lineups in a typical supermarket, with more than 80% of their cooling load attributed to infiltration of warm and moist air from the surrounding space. The infiltration takes place across the air curtain system of the display case. While the air curtain acts as a thermal shield and as a cooling mechanism to maintain product temperature, it also entrains large amounts of heat and moisture from the adjacent space. Additionally, from food safety and quality standpoints, these fixtures are vulnerable to electric outages and traditionally cannot participate in load flexibility events. This paper describes key features of an innovative design of a self-contained, water-cooled, medium-temperature, open-vertical display case. The novel concept will eliminate the inefficient air curtain system and incorporate a hybrid radiant and low-airflow convective cooling design with a thermal-energy-storage-coupled heat exchanger integrated into the refrigeration circuit. The focus of this paper is on evaluating the thermal performance of the novel hybrid design in maintaining target product temperature. It presents thermal performance findings from thermo-fluid system modeling and robust state-of-the-art laboratory experiments used to validate those models. Load flexibility attributes from thermal energy storage are not discussed. A controlled-environment chamber at the National Renewable Energy Laboratory was leveraged to validate the thermal performance of the novel technology. Final results from bench-scale experiments indicate the proposed design maintained mean product temperatures within food safety guidelines.

commercial refrigeration↗

Three-dimensional printing of ceramic materials

An ink, and products formed from the ink, formulated at least in part from ceramic particles. The ink is formulated so that it can be used in additive manufacturing processes to form three-dimensional printed bodies. The three-dimensional printed bodies can have graded density and can be infiltrated by an infiltration material.

Chandrasekaran, Swetha↗

Embedding sensors in 3D-printed silicon carbide

An improved method for embedding one or more sensors in SiC is provided. The method includes depositing a binder onto successive layers of a SiC powder feedstock to produce a dimensionally stable green body have a true-sized cavity. A sensor component is then press-fit into the true-sized cavity. Alternatively, the green body is printed around the sensor component. The assembly (the green body and the sensor component) is heated within a chemical vapor infiltration (CVI) chamber for debinding, and a precursor gas is introduced for densifying the SiC matrix material. During infiltration, the sensor component becomes bonded to the densified SiC matrix, the sensor component being selected to be thermodynamically compatible with CVI byproducts at elevated temperatures, including temperatures in excess of 1000° C.

Petrie, Christian M.↗

Tunable Dopants with Intrinsic Counterion Separation Reveal the Effects of Electron Affinity on Dopant Intercalation and Free Carrier Production in Sequentially Doped Conjugated Polymer Films

Carrier mobility in doped conjugated polymers is limited by Coulomb interactions with dopant counterions. This complicates studying the effect of the dopant’s oxidation potential on carrier generation because different dopants have different Coulomb interactions with polarons on the polymer backbone. In this work, dodecaborane (DDB)-based dopants are used, which electrostatically shield counterions from carriers and have tunable redox potentials at constant size and shape. DDB dopants produce mobile carriers due to spatial separation of the counterion, and those with greater energetic offsets produce more carriers. Neutron reflectometry indicates that dopant infiltration into conjugated polymer films is redox-potential-driven. Remarkably, X-ray scattering shows that despite their large 2-nm size, DDBs intercalate into the crystalline polymer lamellae like small molecules, indicating that this is the preferred location for dopants of any size. These findings elucidate why doping conjugated polymers usually produces integer, rather than partial charge transfer: dopant counterions effectively intercalate into the lamellae, far from the polarons on the polymer backbone. Finally, it is shown that the IR spectrum provides a simple way to determine polaron mobility. Overall, higher oxidation potentials lead to higher doping efficiencies, with values reaching 100% for driving forces sufficient to dope poorly crystalline regions of the film.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Nanoscale Ternary Amide‐rGO Composite with Boosted Kinetics for Reversible H 2 Storage

Abstract Metal amides are attractive candidates for hydrogen storage due to their high volumetric and gravimetric hydrogen densities. However, the sluggish kinetics and competing side reactions during hydrogen uptake and release limit their practical use. Here, a novel nanoconfined Li 2 Mg(NH) 2 @reduced graphene oxide (rGO) composite is presented, which is fabricated using a melt‐infiltration method with a minimum weight penalty of only 2 wt.%. The presence of rGO ensures close contact between the active phases, effectively preventing aggregation during cycling process. As a result, the reversible capacity of Li 2 Mg(NH) 2 @rGO reaches 4.42 wt.%, with no capacity degradation observed after multiple cycling. Theoretical calculations show that rGO catalyzes the hydrogen bond cleavage at the Mg‐amide/Li hydride interface, leading to local dehydrogenation hotspots and significantly improves kinetics of dehydrogenation compared to the bulk counterpart. This study provides a promising strategy for designing metal imide‐based composites to overcome the kinetic limitations and improve their reversible hydrogen storage performance.

08 HYDROGEN↗

Soil sealing by algae: An alternative to plastic pond liners for outdoor algal cultivation

Commercial production of algal biofuels is currently limited by high capital costs, particularly costs of synthetic pond liners that minimize seepage of cultivation fluids, salts, and nutrients into the subsurface beneath outdoor algae cultivation facilities. Even some profitable nutraceutical companies bear the high costs of pond liners. However, studies of animal waste holding ponds and aquaculture facilities have shown that underlying soils can effectively “self-seal”, potentially eliminating the need for plastic liners. Here, we explored the potential for self-sealing with algae to provide an alternative to synthetic pond liners in unlined algae cultivation ponds. Laboratory-scale soil column experiments were used to investigate soil clogging by algae, a topic rarely discussed in the literature. Columns composed of fine sand, loamy sand, and loam soil displayed reductions in saturated hydraulic conductivity of the entire soil column of up to two orders of magnitude in response to infiltration by the alga Scenedesmus dimorphus suspended in algal culture nutrient solution at a density of 5 × 10 8 cells L –1 . Scanning electron microscope imaging showed a dense algal layer on the surface of each soil column, thickly coating mineral grains with algal material and filling pore spaces. The algal coating was absent in samples at >3 cm depth in the soil columns, and measurements of chlorophyll content also confirmed that algal cells were mostly confined to the soil surface. In this study, the application of an algal suspension contributed significantly to soil sealing. In conclusion, this new application of biological sealing technology should be studied further to determine its utility and durability as an alternative to plastic liners, perhaps in conjunction with soil compaction to achieve hydraulic conductivities beneath algal production ponds that are protective of groundwater quality.

59 BASIC BIOLOGICAL SCIENCES↗

(La 0.8 Sr 0.2 ) 0.98 MnO 3-δ -Zr 0.92 Y 0.16 O 2-δ :PrOx for oxygen electrode supported solid oxide cells

(La 0.8 Sr 0.2 ) 0.98 MnO 3-δ (LSM)- Zr 0.92 Y 0.16 O 2-δ (YSZ) has been widely studied as the cathode for solid oxide fuel cells (SOFCs), but its low activity has been a cell performance limiting factor. Herein, LSM-YSZ:PrO x composite is developed as an active electrocatalyst for both oxygen reduction and evolution reactions. A single step PrO x infiltration into LSM-YSZ lowers the polarization resistance (Rp) 10–20 times depending on the test temperature. Distribution of relaxation times (DRT) calculation reveals that adding PrO x affects surface exchange between adsorbed/desorbed oxygen and lattice oxygen, and oxygen dissociative adsorption/desorption. A symmetrical cell with a thin YSZ electrolyte sandwiched between thick LSM-YSZ:PrO x electrode-supports is developed and its oxygen generation performance and stability are evaluated under various current densities and temperatures. Finally, reversible solid oxide cell (ReSOC) performance is also reported for LSM-YSZ:PrO x supported cells with the oxide fuel electrode Sr 0.95 (Ti 0.3 Fe 0.63 Ni 0.07 )O 3-δ (STFN).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Few-cycle atomic layer deposition to nanoengineer polybenzimidazole for H 2 /CO 2 separation

Atomic layer deposition (ALD) creates uniform sub-nanometer films on a variety of surfaces and nanopore walls and has been used to modify polymers to improve surface affinity towards specific molecules, solvent resistance, and barrier properties to gases and vapors. Here, for the first time, we demonstrate that few-cycle ALD can be used to engineer functional polymers at a sub-nanometer scale to improve both molecular size-sieving ability and counterintuitively, gas permeability. Particularly, 1-cycle ALD treatment of polybenzimidazole (PBI) by sequential exposure to trimethylaluminum (TMA) and water vapor remarkably increases H 2 permeability by 120% - 270% and H 2 /CO 2 selectivity by 30% at 35–200 °C. The ALD not only deposits an AlOx layer on the surface but also enables the TMA to infiltrate and react with the bulk PBI to form an AlO x network, disrupting polymer chain packing and increasing chain rigidity. The membrane exhibits excellent stability when challenged with simulated syngas, overcoming the permeability/selectivity tradeoff for H 2 /CO 2 separation. In conclusion, this study showcases a facile and scalable way of engineering polymeric membranes at a sub-nanometer level to improve molecular separation performance.

36 MATERIALS SCIENCE↗

Role of mixed conducting Pr 0.1 Gd 0.1 Ce 0.8 O 1.9-δ barrier layer on the promotion of SOFC performance

The cathode activity in a solid oxide fuel cell can be promoted by introducing various catalysts to reduce its polarization resistance towards oxygen reduction, and thus improve cell performance. Here, in this work, the La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3 (LSCF) cathode surface is modified by the infiltration of Pr 6 O 11 and the power density at 0.8 V and 750 °C is improved by 21%. Moreover, by replacing the traditional barrier layer Gd 0.2 Ce 0.8 O 1.9 with mixed conducting Pr 0.1 Gd 0.1 Ce 0.8 O 1.9 (PGCO), the power density increases by 38%. The ohmic resistance is dramatically reduced by applying the PGCO interlayer. The distribution of relaxation time was used to analyze the mechanism for which the polarization resistance was decreased, attributing to the mixed conduction nature in PrO x . An increase of power density, ~0.358 W/cm 2 (71%) at 0.8 V, is achieved with the implementation of both surface modification and buffer layer engineering.

08 HYDROGEN↗