Search NASA⌕ Search

SEARCH · Search NASA

Results for “Key enabling technologies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Optical Stochastic Cooling Program at Fermilab's Integrable Optics Test Accelerator

Beam cooling enables an increase of peak and average luminosities and significantly expands the discovery potential of colliders. Optical Stochastic Cooling (OSC) is a high-bandwidth cooling technique that will advance the present state-of-the-art, stochastic-cooling rate by more than three orders of magnitude. A proof-of-principle demonstration with protons or heavy ions involves prohibitive costs, risks and technological challenges; however, exploration of OSC with electrons is a cost-effective alternative for studying the beam-cooling physics, optical systems and diagnostics. The ability to demonstrate OSC was a key requirement in the design of Fermilab's Integrable Optics Test Accelerator (IOTA) ring. The IOTA program will explore the physics and technology of OSC in amplified and non-amplified configurations. We also plan to investigate the cooling and manipulation of a single electron stored in the ring. The OSC apparatus is currently being fabricated, and installation will begin in the fall of 2019. In this contribution, we will describe the IOTA OSC program, the upcoming passive-OSC experimental runs and ongoing preparations for an amplified-OSC experiment.

43 PARTICLE ACCELERATORS↗

Leveraging Hydropower Multi-Sensor Data for Inference and Age-Informed Modeling

Increased demand of operational flexibility such as faster ramp up/down in generation, and more frequent start/stops are putting hydropower plants and their associated components in unprecedented stress. Consequently, these plants are at the high risk of extended and more frequent outage to accommodate unscheduled, and unexpected maintenance. Therefore, hydropower plants are in critical need of data driven and age-informed analysis for their regular and unscheduled operation. Yet not all hydropower plants are exhaustively equipped with sensors and/or measurement streams for their respective components – demanding solutions on how to detect, identify, and locate the cause of any event from the unobservable. Idaho National Laboratory (INL) analyzed the anonymized measurements and event records from the Hydropower Research Institute (HRI) to address this issue, as part of the Water Power Technologies Office (WPTO) funded one year multi-lab project. First, we investigated how time series of multiple sensor measurements can be leveraged to identify an event “root cause” as well as to develop an inference (i.e., estimate the unobservable) problem. INL also investigated how individual hydropower components’ reaction or response times vary across the pre-event, during event, and post-event conditions – enabling the hydropower dynamic models to be age-informed. Finally, the impact of clustering multi-sensor time series on short-term vibration prediction is analyzed. INL will present key findings from these analyses and recommend next steps for stakeholder adoption.

13 HYDRO ENERGY↗

Inter-ELM pedestal turbulence dynamics dependence on q 95 and temperature gradient

A series of dedicated experiments from DIII-D tokamak provide spatially and temporally resolved measurements of electron density and temperature, and multiscale and multichannel fluctuations over a wide range of conditions. Measurements of long wavelength density fluctuations in the type-I ELMing H-mode pedestal routinely revealed a coexistence of multiple instabilities that exhibit dramatic different dynamic behaviors as q 95 and temperature gradient are varied, apparently responsible for limiting pedestal temperature profiles. Two distinct frequency bands of density fluctuations are modulated with ELM cycle with frequency above 200kHz propagating in the electron diamagnetic direction in the lab frame (electron mode) and below 200kHz propagating in the ion diamagnetic direction (ion mode). The electron mode amplitude peaks near the electron temperature gradient region and increases with q 95 which seems to be correlated with the increased χ e at higher q 95 , similar to the characteristics expected for Micro-tearing Mode (MTM). At higher q 95 , during the inter-ELM period, the ion mode decays at later phase of the ELM cycle. Consistently, the poloidal correlation length of the ion mode is also found to reduce which suggests the possible E×B flow shear suppression of ion mode at later phase of the ELM cycle as the Er well recovers. In contrast, the electron mode grows during the ELM cycle and reaches saturation at around 50-60% of ELM period. Linear gyrokinetic simulations find the MTMs as the most unstable mode in the pedestal electron temperature gradient region. The higher q 95 and lower magnetic shear destabilize MTMs. These observations provide key insights of the underlying physics of multifield properties and rich dataset of experimental 'fingerprints' that enable new tests of the theoretical pedestal models and lead to developing a predictive model for pedestal formation on ITER and future burning plasma experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Advancing understanding of microbial bioenergy conversion processes by activity-based protein profiling

Here, the development of renewable biofuels is a global priority, but success will require novel technologies that greatly improve our understanding of microbial systems biology. An approach with great promise in enabling functional characterization of microbes is activity-based protein profiling (ABPP), which employs chemical probes to directly measure enzyme function in discrete enzyme classes in vivo and/or in vitro, thereby facilitating the rapid discovery of new biocatalysts and enabling much improved biofuel production platforms. We review general design strategies in ABPP, and highlight recent advances that are or could be pivotal to biofuels processes including applications of ABPP to cellulosic bioethanol, biodiesel, and phototrophic production of hydrocarbons. We also examine the key challenges and opportunities of ABPP in renewable biofuels research. The integration of ABPP with molecular and systems biology approaches will shed new insight on the catalytic and regulatory mechanisms of functional enzymes and their synergistic effects in the field of biofuels production.

09 BIOMASS FUELS↗

Extreme Temperature Sample Environment for Materials Research Using Neutron Scattering

Extreme temperatures and non-equilibrium materials are both central to Department of Energy’s (DOE) mission of addressing grand challenges in emerging energy and advanced materials technologies. The goal of this project is to develop and perfect a system for studying materials in extreme and non-equilibrium conditions using neutron scattering. Neutron scattering has many advantages in the study of materials structure including the ability to use isotopic substitution to determine partial structure factors. When used at a pulsed neutron source, the potential for event-based detection can enable a stroboscopic technique to interrogate very short lived metastable states in supercooled liquids. The work performed in this Phase I project included: (i) literature reviews and discussions with beamline scientists to establish key requirements for the instrument, (ii) laboratory-based research at Materials Development, Inc. (MDI) to test design concepts, modify control software and model designs, (iii) feasibility experiments and measurements on a prototype sample at the Spallation Neutron Source, and (iv) analysis of the results and design of the proposed Phase II instrument. The results of the work show that the proposed approach is viable and provides a strong basis for the Phase II instrument design and Phase III commercialization. MDI participated in the DOE Commercialization Assistance Program with the Larta Institute (Larta) to accelerate commercial sales of the instruments. The market research identified a served available market of ~13M including sales to beamlines, university research laboratories, and industrial glass and materials businesses. Over the ca. 10 year product life cycle, MDI expects to sell instruments with a cumulative net present value profit of approximately 5M.

47 OTHER INSTRUMENTATION↗

The ReSWARM microgravity flight experiments: Planning, control, and model estimation for on‐orbit close proximity operations

Abstract On‐orbit close proximity operations involve robotic spacecraft maneuvering and making decisions for a growing number of mission scenarios demanding autonomy, including on‐orbit assembly, repair, and astronaut assistance. Of these scenarios, on‐orbit assembly is an enabling technology that will allow large space structures to be built in situ, using smaller building block modules. However, like many of these scenarios, robotic on‐orbit assembly involves several technical hurdles, such as changing system models. For instance, grappled modules moved by a free‐flying “assembler” robot can cause significant changes in the combined system inertia, which have cascading impacts on motion planning and control portions of the autonomy stack. Further, on‐orbit assembly and other scenarios require collision‐avoiding motion planning, particularly when operating in a “construction site” scenario of multiple assembler robots and structures. Multiple key technologies that address these complicating factors for autonomous microgravity close proximity operations are detailed in this work, in particular: (1) application of global long‐horizon planning, accomplished using offline and online sampling‐based planner options that consider the system dynamics; (2) adaptation of the recently proposed RATTLE information‐aware planning framework for on‐orbit reconfiguration model learning; and (3) connection with robust control tools to provide low‐level control robustness using current system knowledge. These approaches were demonstrated for an autonomous on‐orbit assembly use case by the RElative Satellite sWarming and Robotic Maneuvering (ReSWARM) experiments using NASA's Astrobee robots on the International Space Station. Results of the ReSWARM experiments are provided along with significant operational and implementation detail discussing the practicalities of hardware implementation and unique aspects of working with the Astrobee free‐flyer robots in microgravity. ReSWARM provides a base set of planning and control tools for robotic close proximity operations, demonstrates them in microgravity, and outlines some of the important hardware aspects that future autonomous free‐flyers will need to consider.

Robotics↗

A comprehensive review on regeneration strategies for direct air capture

Direct air capture (DAC), which removes CO 2 directly from ambient air, is a critical negative emission technology for mitigating global climate change. Efficiency and the source of energy are crucial considerations for DAC to enable negative emissions. Substantial technological progress has been made in DAC technologies, and promising opportunities exist for commercial-scale deployments. However, DAC technologies require high regeneration energy to release CO 2 from sorbents. Various approaches have been tested and optimized for different DAC systems. This review demonstrates that the work equivalent regeneration energy demand (supported by either the electric grid or fossil fuel combustion) ranges from 0.5–18.75 GJ/t-CO 2 for solid sorbent DAC systems and 0.62–17.28 GJ/t-CO 2 for liquid solvent DAC systems. The regeneration process is the energy-demanding process in DAC that is a key step for efficient operation. Potential methods to lower the regeneration energy demand include microwave, ultrasound, magnetic particle heating, and electric swing. Although the potential methods to date are still at the lab scale, significant work is being done to optimize DAC system processes.

54 ENVIRONMENTAL SCIENCES↗

Neutron Technologies for Bioenergy Research

Neutron scattering is a powerful technique that can be used to probe the structures and dynamics of complex systems. It can provide a fundamental understanding of the processes involved in the production of biofuels from lignocellulosic biomass. A variety of neutron scattering technologies are available to elucidate both the organization and deconstruction of this complex composite material and the associations and morphology of the component polymers and the enzymes acting on them, across multiple length scales ranging from Angstroms to micrometers and time scales from microseconds to picoseconds. Unlike most other experimental techniques, neutron scattering is uniquely sensitive to hydrogen (and its isotope deuterium), an atom abundantly present throughout biomass and a key effector in many biological, chemical, and industrial processes for producing biofuels. Sensitivity to hydrogen, the ability to replace hydrogen with deuterium to alter scattering levels, the fact that neutrons cause little or no direct radiation damage, and the ability of neutrons to exchange thermal energies with materials, provide neutron scattering technologies with unique capabilities for bioenergy research. Further, neutrons are highly penetrating, making it possible to employ sample environments that are not suitable for other techniques. The true power of neutron scattering is realized when it is combined with computer simulation and modeling and contrast variation techniques enabled through selective deuterium labeling.

08 HYDROGEN↗

Process Intensification and Scale-Up of a Continuous Enzymatic Hydrolysis and Separation Process

Combining separate unit operations into one where the best of each part can be maximized is one of the benefits of process intensification. An example is the combination of lignocellulosic biomass enzymatic hydrolysis with the downstream solid-liquid separation step to produce clarified sugars ready for fermentation or catalytic upgrading. The productivity and endpoint yield of enzymatic hydrolysis both enjoy the benefits of reduced feedback inhibition through the continuous removal of sugars by incorporating separations into the reactor. Likewise, the efficiency of recovering clarified sugars from the enzymatic hydrolysis slurry can be enhanced by operating separations equipment at steady-state conditions simultaneously with the continuously fed hydrolysis process. A key parameter that enables greater processing capacity while also raising the risks of failure is the solids loading or concentration. Higher solids loading allows for smaller reactor vessels and results in clarified sugars of higher concentration; however, required pumping power increases, reactor agitation may become ineffective, and membrane flux suffers. Feedstock material attributes influenced by upstream pretreatment must also be scrutinized more carefully: dilute-acid pretreated and deacetylated-and-disc-refined feedstocks exhibit different characteristics that affect agitation and pumping. The authors invite you to further explore the process science enabling the scale-up of this technology from conceptual work at the bench to pilot-scale industrially-relevant equipment where the challenges and solutions of integration and process optimization are expounded upon.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Development of SiC-based Cladding for Accident Tolerant Fuels

Fuels and core structures in current light water reactors (LWR's) are vulnerable to catastrophic failure in severe accidents. This vulnerability is attributed primarily to the rapid oxidation kinetics of zirconium alloys in a water vapor environment at very high temperatures. Alternative materials to zirconium alloys with reduced oxidation kinetics are sought to enable enhanced accident-tolerant fuels and cores. Among the candidate alternatives, silicon carbide (SiC) - based materials, in particular continuous SiC fiber-reinforced SiC matrix ceramic composites (SiC/SiC composites), are considered to offer outstanding safety benefits. The primary objective of this work is to provide with updated overviews of the concepts, development status, and future prospect for the SiC-based accident-tolerant fuel (ATF) claddings. A systematic technology evaluation program plan was developed and updated to review the technologies needed, to identify and analyze critical gaps, and to lay out a road-map toward establishing key technologies. The technology review and the gap analysis in this exercise were based on an early study and community workshops. Many of the technical gaps identified are related with the three key feasibility issues: hydrothermal corrosion, mechanical failure, and fuel compatibility. Additional performance issues including accident-tolerance features and fission product retention during the normal operation have also been identified. The program plan was designed to systematically address the key gap issues and is formulated in a work breakdown structure. Simultaneously, the plan is being established to set a technical program for advancing the technological readiness levels of concept non-specific essential technologies in three top-level categories of Design and Failure, Environmental Effects, and Off-normal Behavior. The execution of the program plan is in progress across the U.S. Department of Energy laboratories, industries, universities, and international collaborators. The critical issues for SiC composite-based fuel cladding concepts were found to be related to the performance in the normal operation. In particular, radiation-assisted hydrothermal corrosion and the gaseous fission product (FP) retention are identified to be the most critical issues. The primary ORNL concept pursues the use of dual-purpose coating on the SiC composite cladding wall to mitigate the corrosion and the gas permeation issues at the same time, whereas the alternative approaches such as the dense monolithic SiC protective layer combined with the water chemistry control may be feasible. Surface metallization through variations of physical vapor deposition and electroplating are being demonstrated. The FP gas retention is an issue associated with the cracking for the ceramic matrix composite cladding. To establish the probabilistic failure behavior, the relevant test methods were developed in ASTM Committee C28 on Advanced Ceramics. Toward the end-plugging technology development, various methods for joining SiC to SiC had been developed and tested for mechanical properties, irradiation effects, and environmental effects. Multiple methods including the pressureless transient eutectic SiC joining and CVD-based SiC joining were identified particularly promising. In addition, a multi-physics, three-dimensional finite element-based modeling is in progress toward an integrated simulation of the SiC composite-cladded fuel evolutions. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Evaluation of Torque-Dense Electric Machine Technology for Off-Highway Vehicle Electrification

Electrification of off-highway vehicles offers the benefits of improved energy efficiency, enhanced control, and reduction in greenhouse gas emissions. However, progress towards electrification has been limited by the low torque density (30 kNm/m 3 ) of conventional electric machines compared to mobile hydraulic machines (up to approximately 1000 kNm/m 3 ). This paper reviews emerging variants of electric machines that offer a step improvement in torque density and potential pathway to enable electrified off-highway vehicles. First, sizing approaches for electric and hydraulic machines are developed, and torque-dense electric machines reviewed in literature are compared to commercial hydraulic machines to identify design trends in terms of speed, torque density, and power density. Next, key metrics are identified for the electric machine, based on which the following four emerging electric machine variants that promise to improve torque density are reviewed: i) multi-harmonic machines injection, ii) combined radial-axial flux machines, iii) magnetic gears, and iv) magnetically-geared machines. Here, the findings from this review show that these new electric machines can achieve upwards of 300% improvement in electric machine torque density, with several designs exceeding 100 kNm/m 3 , making them worthy candidates for further research to bridge the torque density gap with hydraulic machines.

33 ADVANCED PROPULSION SYSTEMS↗

Tailoring the Surface of Metal Halide Perovskites to Enable the Atomic Layer Deposition of Metal Oxide Contacts

Replacing organic contact layers with inorganic counterparts, such as metal oxides, is one strategy for improving long-term device stability in metal halide perovskite solar cells. Often, the methods used to deposit metal oxide thin films are incompatible with metal halide perovskites, creating challenges for the fabrication of contacts above the perovskite absorber layer. In this study, we utilize a one-step, solution treatment of the top surface of Cs 0.25 FA 0.75 Pb(Br 0.20 I 0.80 ) 3 to create a thin (~1 nm) overlayer of lead sulfide (PbS) to protect the underlying perovskite during subsequent deposition. X-ray characterization of the surface region shows that the PbS overlayer limits undesirable changes to the perovskite structure and stoichiometry during atomic layer deposition (ALD) of SnO 2 . This protection enables ALD growth of SnO 2 electron contacts on top of the perovskite without an organic transport layer (e.g., C 60 ), resulting in a solar cell with a power conversion efficiency of 5.8%. This result is a marked improvement over devices with ALD SnO 2 grown directly on the perovskite without a PbS overlayer, which produce no power output. Furthermore, the interface characterization and device results in this study highlight some of the key challenges associated with ALD metal oxide growth on perovskite materials and can help inform the future design of inorganic contact layer deposition in solar photovoltaic technologies.

36 MATERIALS SCIENCE↗

Thin film charged particle detectors

Silicon tracking detectors have grown to cover larger surface areas up to hundreds of square meters, and are even taking over other sub-detectors, such as calorimeters. However, further improvements in tracking detector performance are more likely to arise from the ability to make a low mass detector comprised of a high ratio of active sensor to inactive materials, where dead materials include electrical services, cooling, mechanical supports, etc. In addition, the cost and time to build these detectors is currently large. Therefore, advancements in the fundamental technology of tracking detectors may need to look at a more transformative approach that enables extremely large area coverage with minimal dead material and is easier and faster to build. The advancement of thin film fabrication techniques has the potential to revolutionize the next-to-next generation of particle detector experiments. Some thin film deposition techniques have already been developed and widely used in the industry to make LED screens for TVs and monitors. If large area thin film detectors on the order of several square meters can be fabricated with similar performance as current silicon technologies, they could be used in future particle physics experiments. This paper aims to review the key fundamental performance criteria of existing silicon detectors and past research to use thin films and other semi-conductor materials as particle detectors in order to explore the important considerations and challenges to pursue thin film detectors.

Solid state detectors↗

5G Communications in Nuclear: Potential Use Cases and Security Considerations

As fifth-generation (5G) communications continues to revolutionize the future of wireless technology, there is growing demand to utilize its benefits for critical infrastructures such as nuclear power plants (NPPs). In regard to achieving full automation and control in the operation of existing and future nuclear reactors, the unique capabilities of 5G can bring several potential advantages over other wireless technologies. However, a deep investigation is needed for the availability and security of 5G communications under various NPP operational scenarios. This article examines how 5G security capabilities can be architecturally deployed in nuclear applications so as to replace existing communication infrastructures. We discuss the current use of all wireless technologies in NPPs with their key features. Consequently, we investigated several NPP use cases in which 5G offers potential advantages but entails specific security considerations. The present article covers the characteristics of 5G communications, general challenges to its application in nuclear, and the security gaps that need to be addressed. We also highlight certain 5G security-by-design features that can help addressing current stringent NPP requirements. In addition, we discuss some future research direction that can facilitate the implementation of 5G in a nuclear facility. The findings presented herein can help foster 5G deployment in NPPs, thus enabling secured data transmission, cost savings, and increased operational efficiency with enhanced reliability.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

XVis: Visualization for the Extreme-Scale Scientific-Computation Ecosystem (Mid-year report FY15 Q2)

The XVis project brings together the key elements of research to enable scientific discovery at extreme scale. Scientific computing will no longer be purely about how fast computations can be performed. Energy constraints, processor changes, and I/O limitations necessitate significant changes in both the software applications used in scientific computation and the ways in which scientists use them. Components for modeling, simulation, analysis, and visualization must work together in a computational ecosystem, rather than working independently as they have in the past. This project provides the necessary research and infrastructure for scientific discovery in this new computational ecosystem by addressing four interlocking challenges: emerging processor technology, in situ integration, usability, and proxy analysis.

97 MATHEMATICS AND COMPUTING↗

XVis: Visualization for the Extreme-Scale Scientific-Computation Ecosystem: Year-end report FY15 Q4.

The XVis project brings together the key elements of research to enable scientific discovery at extreme scale. Scientific computing will no longer be purely about how fast computations can be performed. Energy constraints, processor changes, and I/O limitations necessitate significant changes in both the software applications used in scientific computation and the ways in which scientists use them. Components for modeling, simulation, analysis, and visualization must work together in a computational ecosystem, rather than working independently as they have in the past. This project provides the necessary research and infrastructure for scientific discovery in this new computational ecosystem by addressing four interlocking challenges: emerging processor technology, in situ integration, usability, and proxy analysis.

97 MATHEMATICS AND COMPUTING↗

XVis: Visualization for the Extreme-Scale Scientific-Computation Ecosystem. Mid-year report FY16 Q2

The XVis project brings together the key elements of research to enable scientific discovery at extreme scale. Scientific computing will no longer be purely about how fast computations can be performed. Energy constraints, processor changes, and I/O limitations necessitate significant changes in both the software applications used in scientific computation and the ways in which scientists use them. Components for modeling, simulation, analysis, and visualization must work together in a computational ecosystem, rather than working independently as they have in the past. This project provides the necessary research and infrastructure for scientific discovery in this new computational ecosystem by addressing four interlocking challenges: emerging processor technology, in situ integration, usability, and proxy analysis.

97 MATHEMATICS AND COMPUTING↗

XVis: Visualization for the Extreme-Scale Scientific-Computation Ecosystem: Mid-year report FY17 Q2

The XVis project brings together the key elements of research to enable scientific discovery at extreme scale. Scientific computing will no longer be purely about how fast computations can be performed. Energy constraints, processor changes, and I/O limitations necessitate significant changes in both the software applications used in scientific computation and the ways in which scientists use them. Components for modeling, simulation, analysis, and visualization must work together in a computational ecosystem, rather than working independently as they have in the past. This project provides the necessary research and infrastructure for scientific discovery in this new computational ecosystem by addressing four interlocking challenges: emerging processor technology, in situ integration, usability, and proxy analysis.

97 MATHEMATICS AND COMPUTING↗