Search NASA⌕ Search

SEARCH · Search NASA

Results for “Kinetics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50
All sourcesNASA NTRSDOE OSTI
NASA NTRS1971

Kinetic energy and quasi-biennial oscillation.

The modulation of the vertical flux of kinetic energy to the stratosphere by the pressure-work effect at 100 mb is compared with variations in the hemispheric kinetic energy, the horizontal momentum and heat transports at 'low' latitudes, and the tropical zonal wind and temperature for the lower stratosphere. It is deduced that the variation of the vertical flux of geopotential is in phase with the kinetic energy in the lower stratosphere and is statistically related to the time rate of change of the horizontal transports of heat and momentum at 30 N. The association of these results to the general circulation of the lower stratosphere is considered.

Miller, A. J.↗
NASA NTRS1972

Purfication kinetics of beryllium during vacuum induction melting

The kinetics of evaporation in binary alloys were quantitatively treated. The formalism so developed works well for several systems studied. The kinetics of purification of beryllium was studied through evaporation data actually acquired during vacuum induction melting. Normal evaporation equations are shown to be generally valid and useful for understanding the kinetics of beryllium purification. The normal evaporation analysis has been extended to cover cases of limited liquid diffusion. It was shown that under steady-state evaporation, the solute concentration near the surface may be up to six orders of magnitude different from the bulk concentration. Corrections for limited liquid diffusion are definitely needed for the highly evaporative solute elements, such as Zn, Mg, and Na, for which the computed evaporation times are improved by five orders of magnitude. The commonly observed logarithmic relation between evaporation time and final concentration further supports the validity of the normal evaporation equations.

Mukherjee, J. L.↗
NASA NTRS1973

Prediction of free turbulent mixing using a turbulent kinetic energy method

Free turbulent mixing of two-dimensional and axisymmetric one- and two-stream flows is analyzed by a relatively simple turbulent kinetic energy method. This method incorporates a linear relationship between the turbulent shear and the turbulent kinetic energy and an algebraic relationship for the length scale appearing in the turbulent kinetic energy equation. Good results are obtained for a wide variety of flows. The technique is shown to be especially applicable to flows with heat and mass transfer, for which nonunity Prandtl and Schmidt numbers may be assumed.

Harsha, P. T.↗
NASA NTRS1974

Trapping of hydrogen atoms in X-irradiated salts at room temperature and the decay kinetics

The salts (hypophosphites, formates, a phosphite, a phosphate, and an oxalate) were X-irradiated, whereby hydrogen formed chemically by a radiolytic process becomes trapped in the solid. By room temperature vacuum extraction, the kinetics for the evolution of this trapped hydrogen was studied mass spectrometrically. All salts except two exhibited second-order kinetics. The two exceptions (NaH2PO2(H2O) and K2HPO4) showed first-order kinetics. Based on experimental results, the escape of hydrogen involves three steps: the diffusion of hydrogen atoms from the bulk to the surface, association of these atoms on the surface (rate controlling step for second-order hydrogen evolution), and the desorption of molecular hydrogen from the surface. The hydrogen does not escape if the irradiated salt is stored in air, apparently because adsorbed air molecules occupy surface sites required in the escape mechanism.

May, C. E.↗
NASA NTRS1975

Waveguide CO2 laser gain: Dependence on gas kinetic and discharge properties

Using a simple rate equation approach the gas kinetic and discharge properties of waveguide CO2 lasers were examined. The dependence was calculated of the population inversion and laser small signal gain on gas pressure, gas mixture, pumping rate (discharge current), tube bore diameter, and wall temperature. At higher pressures the gain is optimized by using more helium rich mixtures and smaller bore diameters. The dependence of laser tunability on the gas kinetic properties and cavity losses was determined, it was found that for loss cavities the laser tunability may substantially exceed the molecular fullwidth at half maximum. The more helium rich gas mixtures give greater tunability when cavity losses are small and less tunability when cavity losses are large. The role of the various gases in the waveguide CO2 laser is the same as that in conventional devices, by contrast with conventional lasers, the waveguide laser transition is homogeneously broadened. The dependence of gain on gas pressure and other kinetic and discharge properties differs substantially from that predicted by scaling results from conventional low pressure lasers.

Cohen, S. C.↗
NASA NTRS1976

Preliminary scaling laws for plasma current, ion kinetic temperature, and plasma number density in the NASA Lewis bumpy torus plasma

Parametric variation of independent variables which may affect the characteristics of bumpy torus plasma have identified those which have a significant effect on the plasma current, ion kinetic temperature, and plasma number density, and those which do not. Empirical power law correlations of the plasma current, and the ion kinetic temperature and number density were obtained as functions of potential applied to the midplane electrode rings, the background neutral gas pressure, and the magnetic field strength. Additional parameters studied included the type of gas, the polarity of the midplane electrode rings, the mode of plasma operation, and the method of measuring the plasma number density. No significant departures from the scaling laws appear to occur at the highest ion kinetic temperatures or number densities obtained to date.

Roth, J. R.↗
NASA NTRS1976

Waveguide CO2 laser gain - Dependence on gas kinetic and discharge properties

A simple rate-equation approach is used to examine the gas-kinetic and discharge properties of waveguide CO2 lasers. The dependence of the population inversion and laser small-signal gain on gas pressure, gas mixture, pumping rate (discharge current), tube bore diameter, and wall temperature is calculated along with the dependence of laser tunability on the gas-kinetic properties and cavity losses. It is found that for low-loss cavities, the laser tunability may substantially exceed the molecular full width at half-maximum. Furthermore, the more helium-rich gas mixtures give greater tunability when cavity losses are small, and less tunability when cavity losses are large. By contrast with conventional lasers, the waveguide-laser transition is homogeneously broadened. Thus, the dependence of gain on gas pressure and other kinetic properties differs substantially from that predicted by scaling results from conventional low-pressure lasers.

Cohen, S. C.↗
NASA NTRS1976

Preliminary scaling laws for plasma current, ion kinetic temperature, and plasma number density in the NASA Lewis Bumpy Torus plasma

Parametric variation of independent variables which may affect the characteristics of the NASA Lewis Bumpy Torus plasma have identified those which have a significant effect on the plasma current, ion kinetic temperature, and plasma number density, and those which do not. Empirical power-law correlations of the plasma current, and the ion kinetic temperature and number density were obtained as functions of the potential applied to the midplane electrode rings, the background neutral gas pressure, and the magnetic field strength. Additional parameters studied include the type of gas, the polarity of the midplane electrode rings (and hence the direction of the radial electric field), the mode of plasma operation, and the method of measuring the plasma number density. No significant departures from the scaling laws appear to occur at the highest ion kinetic temperatures or number densities obtained to date.

Roth, J. R.↗
NASA NTRS1977

Chemical kinetic modeling of propane oxidation behind shock waves

The stoichiometric combustion of propane behind incident shock waves was studied experimentally and analytically over a temperature range from 1700 K to 2600 K and a pressure range from 1.2 to 1.9 atm. Measurements of the concentrations of carbon monoxide (CO) and carbon dioxide (CO2) and the product of the oxygen atom and carbon dioxide concentrations (O)(CO) were made after passage of the incident shock wave. A kinetic mechanism was developed which, when used in a computer program for a flowing, reacting gas behind an incident shock wave predicted experimentally measured results quite well. Ignition delay times from the literature were also predicted quite well. The kinetic mechanism consisted of 59 individual kinetic steps.

Mclain, A. G.↗
NASA NTRS1976

Growth kinetics of gamma-prime precipitates in a directionally solidified eutectic, gamma/gamma-prime-delta

A directionally solidified eutectic alloy (DSEA), of those viewed as potential candidates for the next generation of aircraft gas turbine blade materials, is studied for the gamma-prime growth kinetics, in the system Ni-Nb-Cr-Al, specifically: Ni-20 w/o Nb-6 w/o Cr-2.5 w/o Al gamma/gamma-prime-delta DSEA. Heat treatment, polishing and etching, and preparation for electron micrography are described, and the size distribution of gamma-prime phase following various anneals is plotted, along with gamma-prime growth kinetics in this specific DSEA, and the cube of gamma-prime particle size vs anneal time. Activation energies and coarsening kinetics are studied.

Tewari, S. N.↗
NASA NTRS1978

Kinetics of pack aluminization of nickel

The kinetics of pack aluminization of unalloyed nickel in packs of varying aluminum activity with various halide activators were studied. Surface compositions of the coatings as functions of time, temperature, and pack composition were obtained in order to establish the boundary conditions for diffusion in the system. The structure of the packs was also examined in order to clarify the mechanism of aluminum transport. The results indicate that the kinetics of pack aluminization are controlled jointly by gas diffusion in the pack and solid diffusion in the coating. Levine and Caves' model for gas diffusion was combined with calculations of rates of diffusion in the solid to formulate a more complete theory for the kinetics of pack aluminization.

Seigle, L. L.↗
NASA NTRS1975

The formation of lunar breccias - Sintering and crystallization kinetics

The process of clastic breccia formation by viscous sintering in a stress-free environment is analyzed by treating crystallization and sintering as concurrent, competing processes. The kinetic analysis of crystallization is based on the construction of continuous cooling curves corresponding to the degree of crystallinity observed in the matrix of the breccia. These curves are obtained from corresponding time-temperature-transformation curves, which in turn are constructed from measured values of the crystal growth rate together with calculated values of the nucleation frequency. The kinetic analysis of sintering is based on a modification of the Frenkel (1945) treatment of viscous sintering appropriate for conditions of continuous cooling. The analysis is applied to Lunar Composition 70019 to illustrate the approach. It is shown that it is possible from the kinetic analysis to estimate both the rate at which a given breccia cooled and the minimum temperature at which the matrix particles came in contact. The results obtained for Lunar Composition 70019 seem physically reasonable and suggest that this sample cooled on the surface of the moon in its present form rather than buried in an ejecta blanket from which it was later excavated.

Uhlmann, D. R.↗
NASA NTRS1979

A kinetic approach to compressible turbulence

A kinetic theory of strong turbulence is developed by decomposing fluctuation of distribution function into scaled components, or ranks, to represent three transport processes: macroscopic evolution, transport property and relaxation. Closure is obtained by formulating a relaxation process for the approach of eddy diffusivity to equilibrium. The kinetic equation is solved and three transport functions of turbulence in adiabatic gas are derived: two transfer functions describe turbulent mode transfer, and a coupling function describes the build-up of kinetic energy at the expense of internal energy. The energy balance in the inertial subrange of homogeneous and isotropic turbulence in an adiabatic gas yields a k to the -3rd law, in agreement with numerical computations from one dimensional model of compressible turbulence.

Tchen, C. M.↗
NASA NTRS1982

A numerical method for integrating the kinetic equations of droplet spectra evolution by condensation/evaporation and by coalescence/breakup processes

An extension of the method of moments is developed for the numerical integration of the kinetic equations of droplet spectra evolution by condensation/evaporation and by coalescence/breakup processes. The number density function n sub k (x,t) in each separate droplet packet between droplet mass grid points (x sub k, x sub k+1) is represented by an expansion in orthogonal polynomials with a given weighting function. In this way droplet number concentrations, liquid water contents and other moments in each droplet packet are conserved and the problem of solving the kinetic equations is replaced by one of solving a set of coupled differential equations for the number density function moments. The method is tested against analytic solutions of the corresponding kinetic equations. Numerical results are obtained for different coalescence/breakup and condensation/evaporation kernels and for different initial droplet spectra. Also droplet mass grid intervals, weighting functions, and time steps are varied.

Emukashvily, I. M.↗
NASA NTRS1983

Solar-simulator-pumped atomic iodine laser kinetics

The literature contains broad ranges of disagreement in kinetic data for the atomic iodine laser. A kinetic model of a solar-simulator-pumped iodine laser is used to select those kinetic data consistent with recent laser experiments at the Langley Research Center. Analysis of the solar-simulator-pumped laser experiments resulted in the following estimates of rate coefficients: for alkyl radical (n-C3F7) and atomic iodine (I) recombination, 4.3 x 10 to the 11th power (1.9) + or - cu cm/s; for n-C3F7I stabilized atomic iodine recombination (I + I) 3.7 x 10 to the -32nd power (2.3) + or -1 cm to the 6th power/s; and for molecular iodine (I2) quenching, 3.1 x 10 to the -11th power (1.6) + or - 1 cu cm/s. These rates are consistent with the recent measurements.

Wilson, H. W.↗
NASA NTRS1983

A kinetic cross-field streaming instability

In a high-beta plasma the so-called modified-two-stream instability, which results from strongly magnetized electrons drifting relative to unmagnetized ions across a homogeneous magnetic field, is misnamed because the mode is highly kinetic, particularly when the relative streaming velocity exceeds the Alfven speed of the plasma. This kinetic cross-field streaming instability is investigated in detail, examining the effect of the electromagnetic terms and the stability boundaries in both low- and high-beta plasmas. An approximate dispersion relation showing the relation of this mode to the whistler is derived and solutions of it are compared with those obtained from the exact dispersion relation. The kinetic mode, unlike the usual modified-two-stream instability, is not stabilized by electromagnetic effects when the relative electron-ion drift speed exceeds the Alfven speed.

Wu, C. S.↗
NASA NTRS1983

Kinetic effects on trace element partitioning

A potential difficulty regarding the application of trace element abundance data to problems in igneous petrogenesis is related to the possibility that partitioning of trace elements among minerals and melt may not be an equilibrium process. It may rather be controlled by kinetic processes, specifically the interplay between crystal growth and diffusion of the trace elements in crystals and melt. The present investigation has the objective to quantify kinetic effects on trace element partitioning. Crystals of olivine, pyroxene, and plagioclase were grown rapidly from synthetic melts resembling naturally-occurring mafic melts and doped with La, Sm, and Lu to quantify the magnitude of the effect of crystal growth rate on concentration of excluded trace elements. Olivine melt partitioning failed to show any appreciable kinetic effects, while diopside/melt distribution coefficients increased by 70 percent when the crystals grew very rapidly.

Lindstrom, D. J.↗
NASA NTRS1984

A comparison of the efficiency of numerical methods for integrating chemical kinetic rate equations

The efficiency of several algorithms used for numerical integration of stiff ordinary differential equations was compared. The methods examined included two general purpose codes EPISODE and LSODE and three codes (CHEMEQ, CREK1D and GCKP84) developed specifically to integrate chemical kinetic rate equations. The codes were applied to two test problems drawn from combustion kinetics. The comparisons show that LSODE is the fastest code available for the integration of combustion kinetic rate equations. It is shown that an iterative solution of the algebraic energy conservation equation to compute the temperature can be more efficient then evaluating the temperature by integrating its time-derivative.

Radhakrishnan, K.↗