Search NASA⌕ Search

SEARCH · Search NASA

Results for “Layered Structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Strain Tuning in Complex Oxide Epitaxial Films Using an Ultrathin Strontium Aluminate Buffer Layer

A reliable method to apply biaxial strain over a wide range of values with minimal dislocation generation is critical for the study of strain dependent physical properties in oxide thin films and heterostructures. In this study, we systematically controlled the strain state in a perovskite manganite thin film by as much as 1% using a new ultrathin strain-releasing buffer layer Sr 3 Al 2 O 6 , and observed signatures of accompanying magnetic and metal–insulator transitions. The near-zero strain state is achieved within five nanometers of buffer layer thickness, substantially thinner than any oxide epitaxial buffer layers that can continuously tune the film strain states. Furthermore, the majority of misfit dislocations were confined to the Sr 3 Al 2 O 6 layer, structurally decoupling defects in the film from the substrate.

36 MATERIALS SCIENCE↗

Cryo-FIB for TEM Investigation of Soft Matter and Beam Sensitive Energy Materials

Primarily driven by structural biology, the rapid advances in cryogenic electron microscopy techniques are now being adopted and applied by materials scientists. Samples that inherently have electron transparency can be rapidly frozen (vitrified) in amorphous ice and imaged directly on a cryogenic transmission electron microscopy (cryo-TEM), however this is not the case for many important materials systems, which can consist of layered structures, embedded architectures, or be contained within a device. Cryogenic focused ion beam (cryo-FIB) lift-out procedures have recently been developed to extract intact regions and interfaces of interest, that can then be thinned to electron transparency and transferred to the cryo-TEM for characterization. Several detailed studies have been reported demonstrating the cryo-FIB lift-out procedure, however due to its relative infancy in materials science improvements are still required to ensure the technique becomes more accessible and routinely successful. Here, we review recent results on the preparation of cryo-TEM lamellae using cryo-FIB and show that the technique is broadly applicable to a range of soft matter and beam sensitive energy materials. We then present a tutorial that can guide the materials scientist through the cryo-FIB lift-out process, highlighting recent methodological advances that address the most common failure points of the technique, such as needle attachment, lift-out and transfer, and final thinning.

36 MATERIALS SCIENCE↗

Finite temperature and confinement along the extra dimensions studied on a five-dimensional U(1) lattice gauge model

In this paper we study the properties of the phase diagram of a simple extra-dimensional model on the lattice at finite temperature. We consider the five-dimensional pure gauge Abelian model with anisotropic couplings which at zero temperature exhibits a new interesting phase, the layer phase. This phase is characterized by a massless photon living on the four-dimensional subspace and confinement along the extra dimension. We show that, as long as the temperature takes a nonzero value, the aforementioned layer phase disappears. It would be equivalent to assume that at finite temperature the higher-dimensional lattice model loses any feature of the layered structure due to the deconfinement which opens up the interactions between the three-dimensional subspaces at finite temperature.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Characterizing the Turbulent Structure of the Convective Boundary Layer Using ARM/ASR Observations and LES Model Output

This project will ultimately combine observations from Raman lidar, Doppler lidar, AERI, eddy correlation measurements, and airborne and ground-based high spectral resolution lidar systems with many large eddy simulations (LES) of realistic boundary layer cases to study: The diurnal evolution of the boundary layer thermodynamic structure; The turbulent structure of the CBL and the entrainment zone; The ability of LES models to simulate the thermodynamic and turbulent structure of the CBL; How perturbations in the surface properties and CBL properties influence boundary layer clouds; The similarities and differences in the boundary layer and cloud interaction in the marine vs. continental boundary layer.

54 ENVIRONMENTAL SCIENCES↗

Cryo-FIB for TEM Investigation of Soft Matter and Beam Sensitive Energy Materials

Primarily driven by structural biology, the rapid advances in cryogenic electron microscopy techniques are now being adopted and applied by materials scientists. Samples that inherently have electron transparency can be rapidly frozen (vitrified) in amorphous ice and imaged directly on a cryogenic transmission electron microscopy (cryo-TEM), however this is not the case for many important materials systems, which can consist of layered structures, embedded architectures, or be contained within a device. Cryogenic focused ion beam (cryo-FIB) lift-out procedures have recently been developed to extract intact regions and interfaces of interest, that can then be thinned to electron transparency and transferred to the cryo-TEM for characterization. Several detailed studies have been reported demonstrating the cryo-FIB lift-out procedure, however due to its relative infancy in materials science improvements are still required to ensure the technique becomes more accessible and routinely successful. Here, we review recent results on the preparation of cryo-TEM lamellae using cryo-FIB and show that the technique is broadly applicable to a range of soft matter and beam sensitive energy materials. We then present a tutorial that can guide the materials scientist through the cryo-FIB lift-out process, highlighting recent methodological advances that address the most common failure points of the technique, such as needle attachment, lift-out and transfer, and final thinning.

36 MATERIALS SCIENCE↗

Shear-stress-induced structural arrangement of water molecules in nanoscale Couette flow with slipping at wall boundary

This study investigated the structuring of water molecules in a nanoscale Couette flow with the upper plate subjected to lateral forces with various magnitudes and water slipping against a metal wall. It was found that when the upper plate is subjected to a force, the water body deforms into a parallelepiped. Water molecules in the channel are then gradually arranged into lattice positions, creating a layered structure. The structural arrangement of water molecules is caused by the water molecules accommodating themselves to the increase in energy under the application of a lateral force on the moving plate. The ordering arrangement of water molecules increases the rotational degree of freedom, allowing the molecules to increase their Coulomb potential energy through polar rotation that accounts for the energy input through the upper plate. With a force continuously applied to the upper plate, the water molecules in contact with the upper plate move forward until slip between the water and upper plate occurs. The relation between the structural arrangement of water molecules, slip at the wall, and the shear force is studied. The relation between the slip and the locking/unlocking of water molecules to metal atoms is also studied.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ba{sub 2}Cu{sub 2}Te{sub 2}P{sub 2}O{sub 13}: A new telluro-phosphate with S=1/2 Heisenberg chain

A new telluro-phosphate compound Ba{sub 2}Cu{sub 2}Te{sub 2}P{sub 2}O{sub 13} with S=1/2 Heisenberg chain has been successfully synthesized by solid state reaction and grown by flux method. Single crystal X-ray diffraction reveals that Ba{sub 2}Cu{sub 2}Te{sub 2}P{sub 2}O{sub 13} crystallizes into a monoclinic space group C2/c and cell parameters of a=17.647(3) Å, b=7.255(2) Å, c=9.191(2) Å and β=100.16 (3)°. In the structure of Ba{sub 2}Cu{sub 2}Te{sub 2}P{sub 2}O{sub 13}, one dimensional [CuTePO{sub 7}]{sup 3−} chains are formed by tetrahedral PO{sub 4} and trigonal bi-pyramidal TeO{sub 4} joining square planar CuO{sub 4} groups. Those [CuTePO{sub 7}]{sup 3−} chains are inter-connected by sharing one oxygen atom from the TeO{sub 4} group to form two dimensional layers. Magnetic susceptibility and specific heat measurements confirm that the title compound is a model one dimensional Heisenberg antiferromagnetic chain system. - Graphical abstract: Ba{sub 2}Cu{sub 2}Te{sub 2}P{sub 2}O{sub 13}, containing (CuTePO{sub 7}){sup 3−} chains formed by PO{sub 4} and TeO{sub 4} joining CuO{sub 4} groups, shows typical 1D Heisenberg antiferromagnetic chain model behavior as confirmed by magnetic measurements. - Highlights: • New telluro-phosphate Ba{sub 2}Cu{sub 2}Te{sub 2}P{sub 2}O{sub 13} has been grown. • It features layered structure composed of [CuTePO{sub 7}]{sup 3−} chains and TeO{sub 4} groups. • It shows the Heisenberg antiferromagnetic chain behavior. • It is transparent in the range of 1000–2500 nm with a UV absorption edge of 393 nm.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Diverse Cd{sup II} coordination complexes derived from bromide isophthalic acid binding with auxiliary N-donor ligands

The coordination characteristics of 4-bromoisophthalic acid (4-Br-H{sub 2}ip) have been investigated in a series of Cd{sup II}-based frameworks. Hydrothermal reactions of Cd{sup II} salts and 4-Br-H{sub 2}ip together with flexible or semiflexible N-donor auxiliary ligands resulted in the formation of four three-dimensional coordination complexes with diverse structures: (Cd(bix){sub 0.5}(bix){sub 0.5}(4-Br-ip)]·H{sub 2}O){sub n} (1), [Cd(bbi){sub 0.5}(bbi){sub 0.5}(4-Br-ip)]{sub n} (2), ([Cd(btx){sub 0.5}(4-Br-ip)(H{sub 2}O)]·0.5CH{sub 3}OH·H{sub 2}O){sub n} (3) and ([Cd(bbt){sub 0.5}(4-Br-ip)(H{sub 2}O)]·3·5H{sub 2}O){sub n} (4). These compounds were characterized by elemental analyses, IR spectra, single-crystal and powder X-ray diffraction. They displayed diverse structures depending on the configuration of the 4-connected metal node, the coordination mode of the 4-Br-H{sub 2}ip, the coordination ability and conformationally flexibility of the N-donor auxiliary. Compound 1 exhibits 3-fold interpenetrated 6{sup 6} topology and compound 2 has a 4{sup 12} topology. Compounds 3–4 have similar 3D pillar-layered structures based on 3,4-connected binodal net with the Schläfli symbol of (4·3{sup 8}). The thermal stabilities and photoluminescence properties of them were discussed in detail. - Graphical abstract: Four 3D Cd{sup II} coordination complexes on the basis of 4-bromoisophthalic acid (4-Br-H{sub 2}ip) and two types of flexible (bbi, bbt) and semiflexible (bix, btx) N-donor ligands are prepared. They displayed diverse topology structures of 6{sup 6} (1), 4{sup 12} (2) and 4·3{sup 8} (3−4), depending on the configuration of the 4-connected metal node, the coordination mode of the 4-Br-H{sub 2}ip, the coordination ability and conformationally flexibility of the N-donor auxiliary ligand. - Highlights: • Four 3D Cd{sup II} coordination complexes based on 4-Br-H{sub 2}ip and flexible/semiflexible N-donor ligands have been synthesized. • They displayed diverse topology structures of 6{sup 6} for 1, 4{sup 12} for 2 and 4·3{sup 8} for 3–4. • The structural diversity depends on the configuration of 4-Br-H{sub 2}ip and the coordination behaviors of the auxiliary ligand.

36 MATERIALS SCIENCE↗

Transport in ferromagnet/superconductor spin valves

We consider charge transport properties in realistic, fabricable, ferromagnet/superconductor spin valves having a layered structure F 1 /N/F 2 /S, where F 1 and F 2 denote the ferromagnets, S the superconductor, and N the normal-metal spacer usually inserted in actual devices. Our calculation is fully self-consistent, as required to ensure that conservation laws are satisfied. We include the effects of scattering at all the interfaces. We obtain results for the device conductance G, as a function of bias voltage, for all values of the angle Φ between the magnetizations of the F 1 and F 2 layers and a range of realistic values for the material and geometrical parameters in the sample. We discuss, in the context of our results for G, the relative influence of all parameters on the spin valve properties. We also study the spin current and the corresponding spin-transfer torque in F 1 /F 2 /S structures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrical conductivity and luminescence properties of two silver(I) coordination polymers with heterocyclic nitrogen ligands

The synthesis and X-ray structural characterization of two novel silver(I) coordination polymers, [Ag(NO{sub 3})(quin)]{sub n} (1) and [Ag{sub 8}(HL){sub 2}(H{sub 2}O){sub 4}(mpyz)]·3H{sub 2}O (2) are reported, where quin=5,6,7,8-tetrahydroquinoxaline, H{sub 6}L=cyclohexane-1,2,3,4,5,6-hexacarboxylic acid and mpyz=2-methyl pyrazine. The single crystal diffraction analyses showed that complex 1 is a 2D layered structure, while 2 presents a 3D polymeric architecture. In complex 2 the network is stabilized by argentophilic interactions and hydrogen bonding. Electrical conductivity of order 3×10{sup −4} Scm{sup −1} (1) and 1.6×10{sup −4} Scm{sup −1} (2) is measured on thin film specimen at room temperature. The photoluminescence and thermal properties of the complexes have also been studied. - Graphical abstract: Two new 1D and 3D coordination polymers of Ag(I) have been synthesized and characterized by X-ray analysis. The electrical, luminescence and thermal properties have been studied. - Highlights: • 1 is 2D layered while 2 present a 3D polymeric architecture. • The network in 2 is stabilized by argentophilic interactions and hydrogen bonding. • Electrical conductivity measurement is quite interesting. • Argentophilic interaction and intra-ligand π{sup ⁎}–π CT explains emission behavior of 2.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Control over emergence and alignment of transient blisters in thermo-responsive gels using hierarchically patterned substrates

Surfaces with tunable microscale textures are vital in a large variety of technological applications, including heat transfer, antifouling and adhesion. To facilitate such broad-scale use, there is a need to create surfaces that undergo reconfigurable changes in topology and thus, enable switchable functionality. To date, there is a relative dearth of methods for engineering surfaces that can be actuated to change topography over a range of length scales, and hence, form tunable hierarchically structured layers. Combining modeling and experiments, we design a geometrically patterned, thermo-responsive poly (N-isopropylacrylamide) gel film that undergoes controllable hierarchical changes in topology with changes in temperature. At the bottom, the film is covalently bound to a solid, curved substrate; at the top, the film encompasses longitudinal rectangular ridges that are oriented perpendicular to the underlying cylindrical curves. At temperatures below lower critical solution temperature (LCST), the swollen gel exhibits 3D variations in polymer density and thickness defined by the gel's top and bottom topography. As the temperature rises above LCST, the interplay between the upper ridges and lower curves in the gel drives non-uniform, directional solvent transport, the nucleation and propagation of a phase-separated higher-density skin layer, and the resulting pressure buildup within the film. These different, interacting kinetic processes lead to an instability, which produces transient microscopic blisters in the film. Through simulations, we show how tuning the width of the ridges modifies the propagation of a skin layer and creates localized pressure build-up points, which enables control over the emergence, distribution, and alignment of the microscopic blisters. Futhermore, we provide a simple argument to predict the size of such microscopic features. Experiments confirm our predictions and further highlight how our computational model enables the rational design of topographical transitions in these tunable films. The development of actuatable, hierarchically structured films provides new routes for achieving switchable functionality in actuators, drug release systems and adhesives.

42 ENGINEERING↗

Hot-carrier-induced linear drain current and threshold voltage degradation for thin layer silicon-on-insulator field P-channel lateral double-diffused metal-oxide-semiconductor

Hot-carrier-induced linear drain current (I{sub dlin}) and threshold voltage (V{sub th}) degradations for the thin layer SOI field p-channel lateral double-diffused MOS (pLDMOS) are investigated. Two competition degradation mechanisms are revealed and the hot-carrier conductance modulation model is proposed. In the channel, hot-hole injection induced positive oxide trapped charge and interface trap gives rise to the V{sub th} increasing and the channel conductance (G{sub ch}) decreasing, then reduces I{sub dlin}. In the p-drift region, hot-electron injection induced negative oxide trapped charge enhances the conductance of drift doping resistance (G{sub d}), and then increases I{sub dlin}. Consequently, the eventual I{sub dlin} degradation is controlled by the competition of the two mechanisms due to conductance modulation in the both regions. Based on the model, it is explained that the measured I{sub dlin} anomalously increases while the V{sub th} is increasing with power law. The thin layer field pLDMOS exhibits more severe V{sub th} instability compared with thick SOI layer structure; as a result, it should be seriously evaluated in actual application in switching circuit.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Interplay between electron localization, magnetic order, and Jahn-Teller distortion dictates LiMnO2 phase stability

The development of manganese (Mn)-rich cathodes for Li-ion batteries promises to alleviate potential supply chain bottlenecks in battery manufacturing. Fundamental challenges in Mn-rich cathodes arise from phenomena such as structural changes due to cooperative Jahn-Teller (JT) distortions of in octahedral environments, Mn migration, and phase transformations to spinel-like order, all of which affect the electrochemical performance. These physically complex phenomena motivate an re-examination of the Li-Mn-O rock-salt space, with a focus on the thermodynamics of the prototypical, polymorphs. It is found that the generalized gradient approximation (GGA-PBEsol) and meta-GGA ( ) density functionals with empirically fitted on-site Hubbard corrections yield spurious stable phases for , such as predicting a phase with -like order ( ) to be the ground state instead of the orthorhombic (Pmmn) phase, which is the experimentally known ground state. Accounting for antiferromagnetic order in each structure is shown to have a substantial effect on the total energies and resulting phase stability. By using hybrid-GGA (HSE06) and GGA with self-consistent Hubbard parameters (on-site and inter-site ) calculated from linear response theory, the experimentally observed phase stability trends are recovered. The calculated on-site between Mn- states in the experimentally observed orthorhombic, layered, and spinel phases are significantly smaller than in and disordered layered structures, by within GGA. The smaller values of are shown to be correlated with a collinear ordering of JT distortions, in which all orbitals are oriented in the same direction. This cooperative JT effect can lead to greater electron delocalization from Mn along the states due to increased Mn-O covalency, which contributes to the greater electronic stability compared to the phases with noncollinear JT arrangements. The structures with collinear ordering of JT distortions also generate greater vibrational entropy, which helps stabilize these phases at high temperature. These phases are shown to be strongly insulating with large calculated band gaps , which are computed using HSE06 and .

Kam, Ronald L↗

A molecular view of vapor deposited glasses

Recently, novel organic glassy materials that exhibit remarkable stability have been prepared by vapor deposition. The thermophysical properties of these new ''stable'' glasses are equivalent to those that common glasses would exhibit after aging over periods lasting thousands of years. The origin of such enhanced stability has been elusive; in the absence of detailed models, past studies have discussed the formation of new polyamorphs or that of nanocrystals to explain the observed behavior. In this work, an atomistic molecular model of trehalose, a disaccharide of glucose, is used to examine the properties of vapor-deposited stable glasses. Consistent with experiment, the model predicts the formation of stable glasses having a higher density, a lower enthalpy, and higher onset temperatures than those of the corresponding ''ordinary'' glass formed by quenching the bulk liquid. Simulations reveal that newly formed layers of the growing vapor-deposited film exhibit greater mobility than the remainder of the material, thereby enabling a reorganization of the film as it is grown. They also reveal that ''stable'' glasses exhibit a distinct layered structure in the direction normal to the substrate that is responsible for their unusual properties.

36 MATERIALS SCIENCE↗

Synthesis and electronic properties of Ruddlesden-Popper strontium iridate epitaxial thin films stabilized by control of growth kinetics

We report on the selective fabrication of high-quality Sr 2 IrO 4 and SrIrO 3 epitaxial thin films from a single polycrystalline Sr2IrO4 target by pulsed laser deposition. Using a combination of x-ray diffraction and photoemission spectroscopy characterizations, we discover that within a relatively narrow range of substrate temperature, the oxygen partial pressure plays a critical role in the cation stoichiometric ratio of the films, and triggers the stabilization of different Ruddlesden-Popper (RP) phases. Resonant x-ray absorption spectroscopy measurements taken at the Ir L edge and the O K edge demonstrate the presence of strong spin-orbit coupling, and reveal the electronic and orbital structures of both compounds. These results suggest that in addition to the conventional thermodynamics consideration, higher members of the Sr n+1 Ir n O 3n+1 series can possibly be achieved by kinetic control away from the thermodynamic limit. These findings offer an approach to the synthesis of ultrathin films of the RP series of iridates and can be extended to other complex oxides with layered structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cadmium(II) terephthalates based on trinuclear units {Cd_3(bdc)_3}: control of coordination structure dimensionality and luminescence properties

Two metal-organic coordination polymers based on cadmium(II) ions and terephthalic (1,4-benzenedicarboxylic) acid were synthesized in dimethylformamide or a mixture of dimethylformamide and methanol: [Cd{sub 3}(bdc){sub 3}(dmf){sub 4}] (1, bdc is 1,4-benzenedicarboxylate, dmf is N,N´-dimethylformamide) and [Cd{sub 3}(bdc){sub 3}(dmf){sub 2}] (2), respectively. According to the single-crystal X-ray diffraction data, both compounds are built up by the trinuclear carboxylate units {Cd_3(O_2CR)_6}. Compound 1 has a layered structure, whereas compound 2 has a three-dimensional structure due to the presence of additional coordination interactions between adjacent trinuclear units and the formation of polymer chains {Cd_3(dmf)_2(μ_2-O_2CR-κ"1,κ"1)_2(μ_2-O_2CR-κ"2,κ"1)_4(O_2CR-κ"1)2}. The synthesized compounds were characterized by IR spectroscopy, thermogravimetric analysis, elemental analysis, and powder X-ray diffrac- tion. The luminescence properties of these compounds provide evidence for the existence of both intraligand and charge-transfer transitions. The luminescence quantum yields for both compounds are 10%.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗