Search NASA⌕ Search

SEARCH · Search NASA

Results for “MATHEMATICS - BOUNDARY VALUES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Method and system of filtering and recommending documents

Disclosed is a method and system for discovering documents using a computer and providing a small set of the most relevant documents to the attention of a human observer. Using the method, the computer obtains a seed document from the user and generates a seed document vector using term frequency-inverse corpus frequency weighting. A keyword index for a plurality of source documents can be compared with the weighted terms of the seed document vector. The comparison is then filtered to reduce the number of documents, which define an initial subset of the source documents. Initial subset vectors are generated and compared to the seed document vector to obtain a similarity value for each comparison. Based on the similarity value, the method then recommends one or more of the source documents.

97 MATHEMATICS AND COMPUTING↗

Determination of the Charge Materials Range in Multistage Charge Burden Optimization for Foundry Furnaces

Optimization of charge burden for foundry furnaces lies in determining a percentage or mass (kg, t) of the share of each charge material in the burden with the lowest unit cost. A classic task of charge burden optimization requires a definition of an objective function, which most often defines the cost of the charge burden and a system of constraints, including technological assumptions such as the balance of chemical elements for the required chemical composition of the charge or molten metal, limitations of the mass fraction of the individual elements of the charge, and others. The solution for such an optimization task is a set of starting values for the devices which weigh and proportion the charge materials for a foundry furnace. The consequences of deviations from proper values, causes by inaccurate weighing or proportioning and human error as well, can be limited by using an appropriately designed and implemented multistage optimization algorithm. This article presents a mathematical model of such an algorithm and discussion of its practical application. The algorithm as described below can be an important element of computer-aided decision to be made by employees in the process of batch compilation or automatically control devices dosing individual batch components. An IT system with an implemented algorithm may significantly increase the efficiency of charge preparation for a foundry furnace, guaranteeing its correct chemical composition despite batch materials dosing errors. It will contribute to a significant improvement of economic indicators of liquid metal production, with the effect of boosting the competitiveness of the foundry industry.

36 MATERIALS SCIENCE↗

Relationships between CO 2 , thermodynamic limits on silicate weathering, and the strength of the silicate weathering feedback

Recent studies have suggested that thermodynamic limitations on chemical weathering rates exert a first-order control on riverine solute fluxes and by extension, global chemical weathering rates. As such, these limitations may play a prominent role in the regulation of carbon dioxide levels (pCO 2 ) over geologic timescales by constraining the maximum global weathering flux. In this study, we develop a theoretical scaling relationship between equilibrium solute concentrations and pCO 2 based on equilibrium constants and reaction stoichiometry relating primary mineral dissolution and secondary mineral precipitation. Here, we test this theoretical scaling relationship against reactive transport simulations of chemical weathering profiles under open-and closed-system conditions, representing partially and fully water-saturated regolith, respectively. Under open-system conditions, equilibrium bicarbonate concentrations vary as a power-law function of pCO 2 (y =kx n )where nis dependent on reaction stoichiometry and kis dependent on both reaction stoichiometry and the equilibrium constant. Under closed-system conditions, bicarbonate concentrations vary linearly with pCO 2 at low values and approach open-system scaling at high pCO 2 . To describe the potential role of thermodynamic limitations in the global silicate weathering feedback, we develop a new mathematical framework to assess weathering feedback strength in terms of both (1) steady-state atmospheric pCO 2 concentrations, and (2) susceptibility to secular changes in degassing rates and transient carbon cycle perturbations, which we term 1st and 2nd order feedback strength, respectively. Finally, we discuss the implications of these results for the effects of vascular land plant evolution on feedback strength, the potential role of vegetation in controlling modern solute fluxes, and the application of these frameworks to a more complete functional description of the silicate weathering feedback. Most notably, the dependence of equilibrium solute concentrations on pCO 2 may represent a direct weathering feedback largely independent of climate and modulated by belowground organic carbon respiration.

58 GEOSCIENCES↗

Visualizing the Connections in the EXFOR Database

The EXFOR database contains many datasets (over 6160) in which the measured values are reaction combinations, which means that they are not an absolute measurement of an experimental quantity. Rather, they are ratios of quantities, sums of quantities, or some other mathematical relation of experimental quantities. These reaction combinations couple large numbers of data sets together in non-trivial ways. Here a visualization is presented of the coupled data used to derive cross material covariances for the COMMARA-3 library. Links are provided to other larger visualizations on the NNDC website.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Constant residual electrostatic electron plasma mode in Vlasov-Ampere system

In a collisionless Vlasov-Poisson (V-P) electron plasma system, two types of modes for electric field perturbation exist: the exponentially Landau damped electron plasma waves and the initial-value sensitive ballistic modes. Here, the V-P system is modified slightly to a Vlasov-Ampere (V-A) system. A new constant residual mode is revealed. Mathematically, this mode comes from the Laplace transform of an initial electric field perturbation, and physically represents that an initial perturbation (e.g., external electric field perturbation) would not be damped away. Thus, this residual mode is more difficult to be damped than the ballistic mode.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Mathematical Modeling of the Effectiveness of Facemasks in Reducing the Spread of Novel Influenza A (H1N1)

On June 11, 2009, the World Health Organization declared the outbreak of novel influenza A (H1N1) a pandemic. With limited supplies of antivirals and vaccines, countries and individuals are looking at other ways to reduce the spread of pandemic (H1N1) 2009, particularly options that are cost effective and relatively easy to implement. Recent experiences with the 2003 SARS and 2009 H1N1 epidemics have shown that people are willing to wear facemasks to protect themselves against infection; however, little research has been done to quantify the impact of using facemasks in reducing the spread of disease. We construct and analyze a mathematical model for a population in which some people wear facemasks during the pandemic and quantify impact of these masks on the spread of influenza. To estimate the parameter values used for the effectiveness of facemasks, we used available data from studies on N95 respirators and surgical facemasks. The results show that if N95 respirators are only 20% effective in reducing susceptibility and infectivity, only 10% of the population would have to wear them to reduce the number of influenza A (H1N1) cases by 20%. We can conclude from our model that, if worn properly, facemasks are an effective intervention strategy in reducing the spread of pandemic (H1N1) 2009.

59 BASIC BIOLOGICAL SCIENCES↗

Low cost vee-trough evacuated tube collector module

A low cost solar collector capable of operating at 150-200 C is described. An evacuated tube receiver is combined with asymmetric vee-trough concentrators. Peak efficiencies of about 40% at 120 C and 30% at 180 C are expected. Predicted future collector cost is $70/sq m which yields an energy cost of $4.20/GJ at 120 C. During the development of the vee trough/evacuated tube collector both mathematical models to predict thermal and optical performance were developed and tests run to verify theory. The asymmetric vee trough concentrator increases the solar flux intensity for an average value of 2 for year-round performance. Optimized collector module has reflector angles of 55 deg/85 deg. The aperture plane is tilted to the latitude. The reflector is made of electropolished aluminum. The supporting frame is formed by bending sheet metal. Evacuated tube receivers are Pyrex, 15 cm diam and 2.4 m long. The module has 12 tubes on right and left sides altogether. Attainable operation at temperatures on the order of 150-200 C are suitable for absorption refrigeration and power generation via Rankine engines.

Selcuk, M. K.↗

A regularization method for extrapolation of solar potential magnetic fields

The mathematical basis of a Tikhonov regularization method for extrapolating the chromospheric-coronal magnetic field using photospheric vector magnetograms is discussed. The basic techniques show that the Cauchy initial value problem can be formulated for potential magnetic fields. The potential field analysis considers a set of linear, elliptic partial differential equations. It is found that, by introducing an appropriate smoothing of the initial data of the Cauchy potential problem, an approximate Fourier integral solution is found, and an upper bound to the error in the solution is derived. This specific regularization technique, which is a function of magnetograph measurement sensitivities, provides a method to extrapolate the potential magnetic field above an active region into the chromosphere and low corona.

Gary, G. A.↗

Experimental and Mathematical Simulation Study on the Granulation of a Modified Basic Oxygen Furnace Steel Slag

Basic oxygen furnace (BOF) steel slag is a major waste of the steelmaking industry. Utilization of BOF slag contributes to the sustainability of the steel industry by alleviating its environmental impact. Vitrification during cooling is an effective method to promote the cementitious activity of slags with the aim to apply slags in high value-added applications. In the present study, an Al{sub 2}O{sub 3}- and SiO{sub 2}-modified BOF slag was water granulated at a pilot scale. The amorphous and mineral fractions were measured quantitatively. The critical cooling rate to vitrify the modified slag was calculated through the Time-Temperature-Transformation diagrams constructed using in situ confocal scanning laser microscopy. To provide an insight into the crystallization behavior during the granulation process, a mathematical model was developed. The model was validated by comparing the amorphous fraction obtained from experiments with that from simulation. Temperature profiles of the slag particles with varied sizes were calculated with the aid of COMSOL Multiphysics software. The effect of particle size on the vitrified fraction was discussed in detail and the temperature gradient from surface to center of the particle was identified. The results provide novel fundamental understanding of the vitrification process regarding to the slag valorization, which will help the industrial implementation of granulation for pollution remediation and other engineered environmental systems such as chemical industry and pharmaceutical industry.

36 MATERIALS SCIENCE↗

Role of higher-multipole deformations in exotic {sup 14}C cluster radioactivity

We have studied nine cases of spontaneous emission of {sup 14}C clusters in the ground-state decays of the same number of parent nuclei from the trans-lead region, specifically from {sup 221}Fr to {sup 226}Th, using the preformed cluster model (PCM) of Gupta and collaborators, with choices of spherical, quadrupole deformation ({beta}{sub 2}) alone, and higher-multipole deformations ({beta}{sub 2}, {beta}{sub 3}, {beta}{sub 4}) with cold ''compact'' orientations {theta}{sup c} of decay products. The calculated {sup 14}C cluster decay half-life times are found to be in nice agreement with experimental data only for the case of higher-multipole deformations ({beta}{sub 2}-{beta}{sub 4}) and {theta}{sup c} orientations of cold elongated configurations. In other words, compared to our earlier study of clusters heavier than {sup 14}C, where the inclusion of {beta}{sub 2} alone, with ''optimum'' orientations, was found to be enough to give the best comparison with data, here for {sup 14}C cluster decay the inclusion of higher-multipole deformations (up to hexadecapole), together with {theta}{sup c} orientations, is found to be essential on the basis of the PCM. Interestingly, whereas both the penetration probability and assault frequency work simply as scaling factors, the preformation probability is strongly influenced by the order of multipole deformations and orientations of nuclei. The possible role of Q value and angular-momentum effects are also considered in reference to {sup 14}C cluster radioactivity.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Stochastic Differential Games with Asymmetric Information

We investigate a two-player zero-sum stochastic differential game in which the players have an asymmetric information on the random payoff. We prove that the game has a value and characterize this value in terms of dual viscosity solutions of some second order Hamilton-Jacobi equation.

97 MATHEMATICS AND COMPUTING↗

Optimal Control of Markov Processes with Age-Dependent Transition Rates

We study optimal control of Markov processes with age-dependent transition rates. The control policy is chosen continuously over time based on the state of the process and its age. We study infinite horizon discounted cost and infinite horizon average cost problems. Our approach is via the construction of an equivalent semi-Markov decision process. We characterise the value function and optimal controls for both discounted and average cost cases.

24 POWER TRANSMISSION AND DISTRIBUTION↗

A Piecewise Deterministic Markov Toy Model for Traffic/Maintenance and Associated Hamilton–Jacobi Integrodifferential Systems on Networks

We study optimal control problems in infinite horizon whxen the dynamics belong to a specific class of piecewise deterministic Markov processes constrained to star-shaped networks (corresponding to a toy traffic model). We adapt the results in Soner (SIAM J Control Optim 24(6):1110–1122, 1986) to prove the regularity of the value function and the dynamic programming principle. Extending the networks and Krylov’s “shaking the coefficients” method, we prove that the value function can be seen as the solution to a linearized optimization problem set on a convenient set of probability measures. The approach relies entirely on viscosity arguments. As a by-product, the dual formulation guarantees that the value function is the pointwise supremum over regular subsolutions of the associated Hamilton–Jacobi integrodifferential system. This ensures that the value function satisfies Perron’s preconization for the (unique) candidate to viscosity solution.

97 MATHEMATICS AND COMPUTING↗

Discrete Control of a Dynamical System with Delay Under Conditions of Uncertainty

In this paper, we present a numerical solution of the discrete control problem for the immune response in an infectious disease under conditions of uncertainty. This problem is described by a nonlinear system of ordinary differential equation with delay. Conditions of uncertainty mean that values of the parameters of the model are unknown and their estimates are corrected by new experimental data. We propose an algorithm that allows one, within the framework of the mathematical model of an infectious disease, to construct the control and to identify parameters. By using the algorithm proposed, we develop treatment programs based on immunotherapy. We show that immunotherapy is an effective treatment for all main forms of disease: acute, chronic, and lethal.

60 APPLIED LIFE SCIENCES↗

Least-squares solutions of generalized inverse eigenvalue problem over Hermitian–Hamiltonian matrices with a submatrix constraint

In this paper, a gradient-based iterative algorithm is proposed for finding the least-squares solutions of the following constrained generalized inverse eigenvalue problem: given X∈C{sup n×m}, Λ=diag(λ{sub 1},λ{sub 2},…,λ{sub m})∈C{sup m×m}, find A{sup ∗},B{sup ∗}∈C{sup n×n}, such that ∥AX−BXΛ∥ is minimized, where A{sup ∗},B{sup ∗} are Hermitian–Hamiltonian except for a special submatrix. For any initial constrained matrices, a solution pair (A{sup ∗},B{sup ∗}) can be obtained in finite iteration steps by this iterative algorithm in the absence of roundoff errors. The least-norm solution can be obtained by choosing a special kind of initial matrix pencil. In addition, the unique optimal approximation solution to a given matrix pencil in the solution set of the above problem can also be obtained. A numerical example is given to show the efficiency of the proposed algorithm.

97 MATHEMATICS AND COMPUTING↗

Network Flow Modeling Via Lattice-Boltzmann Based Channel Conductance

Lattice-Boltzmann (LB) computations of single phase, pore-to-pore conductance are compared to models in which such conductances are computed via standard pore body-channel-pore body series resistance (SR), with the conductance of each individual element (pore body, channel) based on geometric shape factor measurements. The LB computations, based upon actual channel geometry derived from X-ray computed tomographic imagery, reveal that the variation in conductance for channels having similar shape factor is much larger than is adequately captured by the geometric models. Fits to the dependence of median value of conductance versus shape factor from the LB-based computations show a power law dependence of higher power than that predicted by the geometric models. We introduce two network flow models based upon the LB conductance computations: one model is based upon LB computations for each pore-to-pore connection; the second is based upon a power law fit to the relationship between computed conductance and throat shape factor. Bulk absolute permeabilities for Fontainebleau sandstone images are computed using the SR-based network models and the two LB-based models. Both LB-based network models produce bulk absolute permeability values that fit published data more accurately than the SR-based models.

97 MATHEMATICS AND COMPUTING↗

Small deformations of kinks and walls

A Rayleigh–Schrödinger type of perturbation scheme is employed to study weak self-interacting scalar potential perturbations occurring in scalar field models describing 1D domain kinks and 3D domain walls. The solutions for the unperturbed defects are modified by the perturbing potentials. An illustration is provided by adding a cubic potential to the familiar quartic kink potential and solving for the first order correction to the kink solution, using a “slab approximation”. A result is the appearance of an asymmetric scalar potential with different, nondegenerate, vacuum values and the subsequent formation of vacuum bubbles.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A Unified Cohesive Zone Approach to Model Ductile Brittle Transition in Reactor Pressure Vessel Steels

In this study, a unified cohesive zone model has been proposed to predict, Ductile to Brittle Transition, DBT, in Reactor Pressure Vessel, RPV, steels. A general procedure is described to obtain the Cohesive Zone Model, CZM, parameters for the different temperatures and fracture probabilities. In order to establish the full master-curve, the procedure requires three calibration points with one at the upper-shelf for ductile fracture and two for the fracture probabilities, Pf, of 5% and 95% at the lower-shelf. In the current study, these calibrations were carried out by utilizing the experimental fracture toughness values and flow curves. After the calibration procedure, the simulations of fracture behavior (ranging from completely unstable to stable crack extension behavior) in one inch thick compact tension specimens at different temperatures yielded values that were comparable to the experimental fracture toughness values, indicating the viability of such unified modeling approach.

36 MATERIALS SCIENCE↗