Search NASA⌕ Search

SEARCH · Search NASA

Results for “Material Testing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

High-Throughput Optical Mapping for Accelerated Stress Testing of PV Module Materials

The study will provide guidance towards the design and application of larger and/or outdoor-use intended instruments. Measurement capability will be benchmarked against existing specimens, examined in a round-robin study using conventional spectrophotometer instruments. Data acquisition and storage will be integrated into the DuraMAT DataHub network along with data visualization tool, facilitating sharing of information.

14 SOLAR ENERGY↗

Microstructural Characterization of Alloy 709 Plate Materials with Additional Heat Treatment Protocol

This report provides the results on microstructural characterization of the first commercial heat of Alloy 709 plate material which has undergone additional heat treatment protocol. The report is a Level 4 deliverable in FY19 (M4AT-19AN020502012), under the Work Package AT19AN0205201, “A709 Development – ANL.” The study involves thermodynamic-kinetic modeling, heat treating of materials, microhardness testing, x-ray diffraction (XRD) study, scanning electron microscopy (SEM), and transmission electron microscopy (TEM) study. Through thermodynamic-kinetic modeling, it is determined that after an 1100°C solutionizing treatment, heat treating of Alloy 709 at 775°C for 10 hours or at 900°C for 10 hours are candidate recipes for promoting desired microstructural features. Both heat treatments were executed on small samples of the AOD-1100°C condition of the commercial heat of Alloy 709. Micro-hardness tests showed that both treatments increases the hardness of the material. XRD showed that both treatments brings out M23C6 and MX phases, though the 775°C/10h-treatment has more profound effect. The TEM study revealed that similar for both conditions, M23C6 precipitated on grain boundaries and within grain interior. In contrast, after the 775°C/10h treatment, the dislocations are decorated with MX nano particles, while after the 900°C/10h treatment, most of the dislocations are free of MX particles. It is thus determined that the 775°C/10h treatment has a better potential to provide enhanced creep properties by pinning the dislocations with nano particles. Following this study, the 775°C/10h treatment was carried out on a large ESR-1100°C plate at Idaho National Laboratory. Hardness testing and microstructural characterization were performed and compared between the two materials being heated treated under the same protocol. The implication on mechanical properties was briefly discussed.

36 MATERIALS SCIENCE↗

DEVELOPMENT OF BURN TEST SPECIFICATIONS FOR FIRE PROTECTION MATERIALS IN RAM PACKAGES

The regulations in 10 CFR 71 require that the radioactive material (RAM) packages must be able to withstand specific fire conditions given in 10 CFR 71.73 during Hypothetical Accident Conditions (HAC). This requirement is normally satisfied by extensive testing of full scale test specimens under required test conditions. Since fire test planning and execution is expensive and only provides a single snapshot into a package performance, every effort is made to minimize testing and supplement tests with results from computational thermal models. However, the accuracy of such thermal models depends heavily on the thermal properties of the fire insulating materials that are rarely available at the regulatory fire temperatures. To the best of authors knowledge no test standards exist that could be used to test the insulating materials and derive their thermal properties for the RAM package design. This paper presents a review of the existing industry fire testing standards and proposes testing methods that could serve as a standardized specification for testing fire insulating materials for use in RAM packages.

42 ENGINEERING↗

Proposed Testing to Assess the Accuracy of Glass-To-Metal Seal Stress Analyses

The material characterization tests conducted on 304L VAR stainless steel and Schott 8061 glass have provided higher fidelity data for calibration of material models used in Glass - To - Metal (GTM) seal analyses. Specifically, a Thermo - Multi - Linear Elastic Plastic (thermo - MLEP) material model has be endefined for S S304L and the Simplified Potential Energy Clock nonlinear viscoelastic model has been calibrated for the S8061 glass. To assess the accuracy of finite element stress analyses of GTM seals, a suite of tests are proposed to provide data for comparison to model predictions.

Chambers, Robert S.↗

Quantifying Dynamic Processes in Reactive Materials: An Extended Burn Tube Test

Abstract A common method for measuring the reactivity of rapidly deflagrating materials has been to loosely pack a desired mixture into an approx. 10 cm long×3 mm diameter acrylic tube, ignite the material on one end, and report the observed self‐propagating flame velocity through the material. While this method can yield qualitative information, linking this to quantitative intrinsic properties, such as particle burn time, has remained challenging. In this work, we significantly redesign the traditional burn tube experiment. Between 25 and 250 mg of nanocomposite aluminum/copper oxide (Al/CuO) thermite is loosely packed into the capped end of a 1.8 m long tube, and the remainder of the tube is left unfilled. The material is ignited using a hot wire, resulting in a steadily‐propagating luminous front, which extends part, or all, of the way down the length of the tube. We suggest the behavior is a result of “reactive entrainment”, which occurs when the reaction time scale becomes longer than the characteristic momentum relaxation time scale. When this criterion is met, and when there are significant pressure gradients present or produced during the reaction, material will be entrained by the gases before and/or during the reaction; a behavior very different from conventional thermites, which use larger particle sizes. The effect of sample mass and tube diameter on propagation velocity is investigated, and we find a linear scaling with mass and a power law scaling with tube radius ( r −1.3 ) between 1.56 and 4.76 mm radii. For several conditions, we observe the reaction complete; defined by the distance where the propagation velocity decreases to a fixed fraction of its steady value. The ratio of quench distance to propagation velocity was found to approach a constant value of 3.29±0.70 ms, which we suggest is the burn time of the Material. For the range of masses studied in this work, the burn time was found to be independent of mass, implying that it is an intrinsic particle burn time. We expect other quantitative information can be deduced from this experiment, so long as the chosen sample mass and tube dimensions allow one to observe the full extent of reaction.

Sullivan, Kyle T.↗