SEARCH · Search NASA
Results for “Matrix Model”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
CHEMICAL COMPOSITION ANALYSIS AND PRODUCT CONSISTENCY TESTS TO SUPPORT ENHANCED HANFORD WASTE GLASS MODELS: RESULTS FOR THE SECOND SET OF HIGH ALUMINA OUTER LAYER MATRIX GLASSES
Explore the source record for details and available documents.
Bayesian Model for Uncertainty in HOPE Mass Spectrometer Time-of-Flight Matrix -Introduction
Explore the source record for details and available documents.
Emergent unitarity in de Sitter from matrix integrals
We study Jackiw-Teitelboim gravity with positive cosmological constant as a model for de Sitter quantum gravity. We focus on the quantum mechanics of the model at past and future infinity. There is a Hilbert space of asymptotic states and an infinite-time evolution operator between the far past and far future. This evolution is not unitary, although we find that it acts unitarily on a subspace up to non-perturbative corrections. These corrections come from processes which involve changes in the spatial topology, including the nucleation of baby universes. There is significant evidence that this 1+1 dimensional model is dual to a 0+0 dimensional matrix integral in the double-scaled limit. So the bulk quantum mechanics, including the Hilbert space and approximately unitary evolution, emerge from a classical integral. We find that this emergence is a robust consequence of the level repulsion of eigenvalues along with the double scaling limit, and so is rather universal in random matrix theory.
Radiative And Electroweak Penguin Processes in Exclusive B Decays
A review of recent BABAR results on exclusive B {yields} ({rho}/{Omega}){gamma}, B {yields} {pi}l{sup +}l{sup -} and B {yields} K(*) l{sup +}l{sup -} decays is presented. It was found that {bar {Beta}}[B {yields} ({rho}/{omega}){gamma}] = (1.01 {+-} 0.21 {+-} 0.08) x 10{sup -6}, {bar {Beta}}[B{sup +} {yields} {pi}l{sup +}l{sup -}] < 7.9 x 10{sup -8} at 90% C.L., {bar {Beta}}[B {yields} Kl{sup +}l{sup -}] = (0.84 {+-} 0.07 {+-} 0.02) x 10{sup -6} and {bar {Beta}}[B {yields} K*l{sup +}l{sup -}] = (0.78{sub -0.17}{sup +0.19} {+-} 0.11) x 10{sup -6}. it was also found that different asymmetry measurements are consistent with Standard Model expectations. Based on these results an independent estimate of the |V{sub td}/V{sub ts}| matrix element of the CKM matrix is derived to be |V{sub td}/V{sub ts}| = 0.171{sub -0.021-0.014}{sup +0.018+0.017}. A first evidence of B{sup +} {yields} {rho}{sup +}{gamma} decays was found and last year's observation of B{sup 0} {yields} {rho}{sup 0}{gamma} was confirmed.
Strong Kitaev Interaction in BaCo 2 (AsO 4 ) 2
The inelastic neutron scattering results and their analysis unequivocally point to a dominant Kitaev interaction in the honeycomb-lattice cobaltate BaCo 2 (AsO 4 ) 2 . Our anisotropic-exchange model closely describes all available neutron scattering data in the material’s field-polarized phase. Furthermore, the density-matrix renormalization group results for our model are in close accord with the unusual double-zigzag magnetic order and the low in-plane saturation field of BaCo 2 (AsO 4 ) 2 .
A hybrid micro-scale model for transport in connected macro-pores in porous media
Explore the source record for details and available documents.
Constrained Versions of DEDICOM for Use in Unsupervised Part-Of-Speech Tagging
This reports describes extensions of DEDICOM (DEcomposition into DIrectional COMponents) data models [3] that incorporate bound and linear constraints. The main purpose of these extensions is to investigate the use of improved data models for unsupervised part-of-speech tagging, as described by Chew et al. [2]. In that work, a single domain, two-way DEDICOM model was computed on a matrix of bigram fre- quencies of tokens in a corpus and used to identify parts-of-speech as an unsupervised approach to that problem. An open problem identi ed in that work was the com- putation of a DEDICOM model that more closely resembled the matrices used in a Hidden Markov Model (HMM), speci cally through post-processing of the DEDICOM factor matrices. The work reported here consists of the description of several models that aim to provide a direct solution to that problem and a way to t those models. The approach taken here is to incorporate the model requirements as bound and lin- ear constrains into the DEDICOM model directly and solve the data tting problem as a constrained optimization problem. This is in contrast to the typical approaches in the literature, where the DEDICOM model is t using unconstrained optimization approaches, and model requirements are satis ed as a post-processing step.
Heavy-quarkonium production in high energy proton-proton collisions at RHIC
We update the study of the total {psi} and {Upsilon} production cross section in proton-proton collisions at RHIC energies using the QCD-based color-singlet model, including next-to-leading order partonic matrix elements. We also include charm-quark initiated processes which appear at leading order in {alpha}{sub s}, so far overlooked in such studies. Contrary to earlier claims, we show that the color-singlet yield is consistent with measurements over a broad range of J/{psi} rapidities. We find that intrinsic plus sealike charm-initiated processes contribute more than 20% of the direct J/{psi} yield. The key signature for such processes is the observation of a charm-quark jet opposite in azimuthal angle {phi} to the detected J/{psi}. Our results have impact on the proper interpretation of heavy-quarkonium production in heavy-ion collisions and its use as a probe for the quark-gluon plasma.
Digital Twin Model for Advanced Manufacture of a Rotating Detonation Engine Injector
A digital twin material model (DTMM) of an additive manufacturing (AM) process was created to advance the state of the art in rotating detonation engine (RDE) injector design. Current RDE injectors are designed with large pressure drops, enabling a stable and repeatable combustion process. However, this comes at the cost of system efficiency. For the technology to transition to commercial fossil-based power generation, it is important to develop injectors with reduced flow losses. Low-loss injectors are difficult to design and manufacture with conventional manufacturing techniques. AM enables new design options, but the AM manufacturing process must be thoroughly understood to result in a robust design. A DTMM provides the necessary insight by defining the cause-effect relationships between process parameters, microstructure features, and properties. Therefore, a DTMM to support the design and manufacturing process was developed and applied to the design of a new additively manufactured low-loss injector. The injector combustion behavior was characterized through hot-fire tests, and mechanical performance was compared to the DTMM predictions. The two project goals were the successful development of the DTMM and the demonstration of an improved RDE injector design. The RDE injector design and DTMM developments occurred on parallel but dependent paths. The injector was designed to reduce pressure drop by increasing the cross-sectional flow area ratio between the injector air passages and the combustor annulus. This resulted in less structural material, raising the concern that thin members would be susceptible to high-cycle fatigue (HCF) under the periodic loading inherent to an RDE. It was most important for the DTMM to predict behavior in these features; therefore, the injector design concept guided the material thicknesses used in fatigue tests. The DTMM development started by manufacturing a series of coupons over the range of possible AM process variations. A design-of-experiment approach was used to select which process variable combinations gave the most efficient coverage relevant to the injector design space. The microstructure in each of these coupons was characterized, and then computational methods were used to create a numerical model of the correlation between process variables and microstructure. Next, a set of HCF samples were tested to calibrate existing models that map microstructure to HCF performance. Together, these two links formed the DTMM that calculates HCF behavior from AM process variables. Two injector prototypes were additively manufactured. The first injector design strategy aggressively pursued low-loss performance by substantially increasing the oxidizer flow area. The combination of manufacturing lead times and the fatigue testing schedule meant that the DTMM was not available when building this first prototype. Therefore, its process parameters were chosen based on a manual review of the available coupon data. This prototype was built successfully and evaluated in 58 combustion tests. Sustained detonation was achieved with remarkably reduced pressure loss, and some tests even displayed pressure loss characteristics similar to conventional gas turbine combustors. This achieved the project goal of improving RDE injector design. The second injector was manufactured according to the optimized parameters predicted by the DTMM. The flow area modifications of this injector were less aggressive than the first injector since demonstrating low pressure loss was not an objective of the second hot-fire test series. Rather, the test objective was to cause high cycle fatigue failure in the part due to periodic loading from the rotating detonation wave. The observed number of cycles to failure was to be compared to the number predicted by the DTMM and thereby assess the utility of the DTMM in component design. However, the required level of vibration was not obtained during combustion. Therefore, high cycle fatigue was not experienced in the hot-fire tests of the second injector. Fatigue data was obtained by further testing the second injector in a conventional HCF test apparatus. The injector demonstrated HCF strength above the DTMM prediction. In fact, it did not fail and testing was only discontinued due to reaching the end of the period of performance. This points to some success in the project’s primary goal of successfully developing and applying the DTMM to a component design. Implementing the DTMM recommendations for optimal processing parameters led to a part with acceptable properties. The DTMM was also shown to be an efficient correlator of data and to provide insight into the relationship between process settings, microstructure, and property performance. However, the failure of the DTMM prediction to match the experimental result of the injector fatigue test also points to the need to include significantly more data in the model development. In this project, coupons made with identical processing parameters exhibited drastically different properties from each other and from the injector part, which clearly influences the accuracy of a model that predicts performance based on parameters. Uncertainties in the build process must be quantified to develop more robust models. A denser and broader matrix of coupon process and geometry variations, several repeated builds of every point, more in-situ build process measurements, and direct observation of tensile and HCF sample microstructure (as opposed to separate microstructure specimens) are recommendations to improve future AM modeling efforts.
Simulating local measurements on a quantum many-body system with stochastic matrix product states
We demonstrate how to simulate both discrete and continuous stochastic evolutions of a quantum many-body system subject to measurements using matrix product states. A particular, but generally applicable, measurement model is analyzed and a simple representation in terms of matrix product operators is found. The technique is exemplified by numerical simulations of the antiferromagnetic Heisenberg spin-chain model subject to various instances of the measurement model. In particular, we focus on local measurements with small support and nonlocal measurements, which induce long-range correlations.
Large loop effects of extra supersymmetric Higgs doublets to CP violation in B{sup 0} mixing
We consider more than one pair of SU(2){sub L} doublet Higgs supermultiplets in a generic supersymmetric extension of the standard model, and calculate their one-loop contributions to the soft mass insertions {delta}{sub LL} etc. We find that, if large supersymmetry breaking in this sector is realized, the loop effects can give rise to large contributions to the soft mass insertions, meaning that they can generate large flavor-changing neutral currents and CP violations. We apply our result to a recently proposed model based on the discrete Q{sub 6} family group, and calculate the nondiagonal matrix element M{sub 12} of the neutral meson systems. We focus our attention on the extra phases {phi}{sub d,s}{sup {Delta}}in B{sub d,s} mixing and flavor-specific CP asymmetries a{sub sl}{sup d,s} in neutral B decays and obtain values that can be about 1 order of magnitude larger than the standard model predictions. Our final results are comparable with the recent experimental observations at D0 and CDF, but they are still about a factor of 5 smaller than the recently measured dimuon asymmetry from D0.
Low-lying states in {sup 8}B
Excitation functions of elastic and inelastic {sup 7}Be+p scattering were measured in the energy range between 1.6 and 2.8 MeV in the c.m. An R-matrix analysis of the excitation functions provides strong evidence for new positive parity states in {sup 8}B. A new 2{sup +} state at an excitation energy of 2.55 MeV was observed, and a new 0{sup +} state at 1.9 MeV is tentatively suggested. The R-matrix and time-dependent continuum shell model were used in the analysis of the excitation functions. The new results are compared to the calculations of contemporary theoretical models.
Structure of {sup 72,74}Ge nuclei probed with a combined analysis of heavy-ion fusion reactions and Coulomb excitation
We study the fusion reactions of the {sup 72}Ge+{sup 72}Ge and {sup 74}Ge+{sup 74}Ge systems in terms of the full order coupled-channels formalism. We obtain the fusion excitation function as well as the fusion barrier distribution of these reactions using the coupling matrix suggested from the recent Coulomb excitation experiments. We compare those results with the results obtained by the coupling matrix based on the pure vibrational and rotational models. The barrier distribution for the {sup 74}Ge+{sup 74}Ge reaction obtained with the experimental coupling matrix is in good agreement with that obtained with the vibrational model, in contrast to the rotational model. On the other hand, the calculations for {sup 72}Ge+{sup 72}Ge system show that the fusion barrier distribution obtained with the experimental coupling matrix significantly differs from those obtained with vibrational and rotational models. Our study indicates that the shape of {sup 74}Ge is closer to spherical than to deformed, while {sup 72}Ge has a shape admixture in its ground state, which can be described by neither the vibrational nor the rotational models, as suggested by the Coulomb excitation experiments. This finding will resolve the debates concerning the structure of these nuclei.
Method and system to estimate variables in an integrated gasification combined cycle (IGCC) plant
System and method to estimate variables in an integrated gasification combined cycle (IGCC) plant are provided. The system includes a sensor suite to measure respective plant input and output variables. An extended Kalman filter (EKF) receives sensed plant input variables and includes a dynamic model to generate a plurality of plant state estimates and a covariance matrix for the state estimates. A preemptive-constraining processor is configured to preemptively constrain the state estimates and covariance matrix to be free of constraint violations. A measurement-correction processor may be configured to correct constrained state estimates and a constrained covariance matrix based on processing of sensed plant output variables. The measurement-correction processor is coupled to update the dynamic model with corrected state estimates and a corrected covariance matrix. The updated dynamic model may be configured to estimate values for at least one plant variable not originally sensed by the sensor suite.
Assessment of the 3430 Building Filtered Exhaust Stack Sampling Probe Location
Pacific Northwest National Laboratory performed a demonstration to determine the acceptable location in which to place an air sampling probe for emissions monitoring for radionuclides in the exhaust air discharge from the new 3430 Building Filtered Exhaust Stack. The method was to adopt the results of a previously performed test series for a system of similar configuration, followed by a partial test on the actual system to verify the applicability of previously performed tests. The qualification criteria included 1) a uniform air velocity, 2) an average flow angle that does not deviate from the axis of the duct by more than 20°, 3) a uniform concentration of tracer gases, and 4) a uniform concentration of tracer particles. Section 1 provides background information for the demonstration, and Section 2 describes the test strategy, including the criteria for the applicability of model results and the test matrix. Section 3 describes the flow -angle test and the velocity uniformity test, Section 4 provides the test results, and Section 5 provides the conclusions. Appendix A includes the test data sheets, and Appendix B gives applicable qualification results from the previously tested model stack. The data from the previously tested and similarly designed stack was demonstrated to be applicable to the current design for the 3430 Building Filtered Exhaust Stack. The 3430 stack was tested in both January and May of 2010 to document the results of several changes that were made to the exhaust system after the January tests. The 3430 stack meets the qualification criteria given in the American National Standards Institute/Health Physics Society N13.1 standard. Changes to the system configuration or operations outside of the bounds of this report (e.g., exhaust velocity increases, relocation of sample probe) will require retesting/reevaluation to determine compliancewith the requirements.
Assessment of the Building 3430 Filtered Exhaust Stack Sampling Probe Location
Pacific Northwest National Laboratory performed a demonstration to determine the acceptable location in which to place an air sampling probe for emissions monitoring for radionuclides in the exhaust air discharge from the new 3430 Building Filtered Pathway Stack . The method was to adopt the results of a previously performed test series for a system of similar configuration, followed by a partial test on the actual system to verify the applicability of previously performed tests. The qualification criteria included 1) a uniform air velocity, 2) an average flow angle that does not deviate from the axis of the duct by more than 20°, 3) a uniform concentration of tracer gases, and 4) a uniform concentration of tracer particles. Section 1 provides background information for the demonstration, and Section 2 describes the test strategy, including the criteria for the applicability of model results and the test matrix. Section 3 describes the flow angle test and the velocity uniformity test, Section 4 provides the test results, and Section 5 provides the conclusions. Appendix A includes the test data sheets, and Appendix B gives applicable qualification results from the previously tested model stack. The data from the previously tested and similarly designed stack was demonstrated to be applicable to the current design for the 3430 Building Filtered Pathway stack. Therefore, this new system also meets the qualification criteria given in the ANSI/HPS N13.1 standard. Changes to the system configuration or operations outside of the bounds of this report (e.g., exhaust velocity increases, relocation of sample probe) will require retesting/reevaluation to determine compliance to the requirements.
Nanocomposite structure of two-line ferrihydrite powder from total scattering
Ferrihydrite is one of the most important iron-containing minerals on Earth. Yet determination of its atomic-scale structure has been frustrated by its intrinsically poor crystallinity. The key difficulty is that physically-different models can appear consistent with the same experimental data. Using X-ray total scattering and a nancomposite reverse Monte Carlo approach, we evaluate the two principal contending models—one a multi-phase system without tetrahedral iron(III), and the other a single phase with tetrahedral iron(III). Our methodology is unique in considering explicitly the complex nanocomposite structure the material adopts: namely, crystalline domains embedded in a poorly-ordered matrix. The multi-phase model requires unphysical structural rearrangements to fit the data, whereas the single-phase model accounts for the data straightforwardly. Hence the latter provides the more accurate description of the short- and intermediate-range order of ferrihydrite. We discuss how this approach might allow experiment-driven (in)validation of complex models for important nanostructured phases beyond ferrihydrite.