SEARCH · Search NASA
Results for “Nuclear Operating Experience”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Search for neutron-antineutron oscillations at the Sudbury Neutrino Observatory
Tests on B–L symmetry breaking models are important probes to search for new physics. One proposed model with Δ(B–L)=2 involves the oscillations of a neutron to an antineutron. In this paper, a new limit on this process is derived for the data acquired from all three operational phases of the Sudbury Neutrino Observatory experiment. The search concentrated on oscillations occurring within the deuteron, and 23 events were observed against a background expectation of 30.5 events. These translated to a lower limit on the nuclear lifetime of 1.48 × 10 31 yr at 90% C.L. when no restriction was placed on the signal likelihood space (unbounded). Alternatively, a lower limit on the nuclear lifetime was found to be 1.18 × 10 31 yr at 90% C.L. when the signal was forced into a positive likelihood space (bounded). Values for the free oscillation time derived from various models are also provided in this article. Furthermore, this is the first search for neutron-antineutron oscillation with the deuteron as a target.
System Study: Isolation Condenser 1998–2013
This report presents an unreliability evaluation of the isolation condenser (ISO) system at four U.S. boiling water reactors. Demand, run hours, and failure data from fiscal year 1998 through 2013 for selected components were obtained from the Institute of Nuclear Power Operations (INPO) Consolidated Events Database (ICES). The unreliability results are trended for the most recent 10-year period, while yearly estimates for system unreliability are provided for the entire active period. No statistically significant increasing or decreasing trends were identified in the ISO results.
LANL FY21 NCSP Highlights [Slides]
This presentation highlights the activities of Los Alamos National Laboratory (LANL) in fiscal year 2021.These include the celebration of the tenth anniversary of NCERC operations, a large experiment campaign (IER 488 - MUSiC: Measurements of Uranium Subcritical and Critical), preparation for FY22 experiments, the completion of several ongoing experiments, and a control system upgrade project.
Fabrication and test of COMB dipole magnet with STAR® wires
Fermilab is working on superconducting accelerator magnet R&D under the framework of the U.S. MagnetDevelopment Program (USMDP). An integral part of that program is High Temperature Superconducting (HTS)accelerator magnet development to- demonstrate HTS self‐fields of 5 T or greater- be compatible with operation in hybrid LTS/HTS configuration• to probe fields beyond 16 T for future High Energy Physics (HEP) experiments
Skylab experiment performance evaluation manual. Appendix K: Experiment S009 nuclear emulsion (MSFC)
A series of analyses are presented for Experiment S009, nuclear emulsion (MSFC), to be used for evaluating the performance of the Skylab corollary experiments under preflight, inflight, and postflight conditions. Experiment contingency plan workaround procedure and malfunction analyses are included in order to assist in making the experiment operationally successful.
Critical Experiment Accidents - Redux
Much has been written regarding "process accidents" in the realm of criticality safety. Indeed, great effort has been put toward analyzing the accidents for lesson-learned and toward the development of models to predict the behavior of process systems in support of safety cases an emergency response. Less effort has been levied toward the lessons-learned and modeling of critical experiment accidents. Perhaps this stems from the tenets of criticality safety: Fissionable material processes shall be determined to be subcritical under both normal and credible abnormal conditions. Given the imminent startup of the Criticality Experiments Facility (CEF) at the Nevada National Security Site, an examination of critical experiment accidents for lessons-learned is prudent to ensure that the benefit of past experience is applied to CEF operations. In this paper, the history of critical experiment accidents is reviewed and lessons-learned relevant to CEF are discussed.
Vattenfall Decommissioning Planning in Sweden - 17544
A rapid decrease in the power prices in the Nordic market for the last three years has drastically reduced the profitability of the nuclear power plants in Sweden. This has resulted in a very quick re-evaluation of the optimal life-term of the older generation, from the 1970's, nuclear units in Sweden. Hence, it was decided last year to shut-down the Vattenfall Ringhals-1 BWR and the Ringhals-2 PWR by 2020 and 2019, respectively, for financial reasons. Before that decision, the planning had been to operate the units until 50 years life-time, i.e. 2024 and 2025. This decision resulted in a prompt start of the planning for decommissioning of the two units. The planning started with a project, called AVANS, to ensure that the overall planning and to-be-developed organisations had well defined requirements and a common platform. Another project, STURE, was started to ensure the continued operation and in some case movement of common site functions to the two younger units on the Ringhals site, i.e. the PWRs Ringhals-3 and Ringhals-4. This project also has the responsibility to optimise operation of Ringhals-1 and Ringhals-2 to EOL and the subsequent removal of the nuclear fuel from the units after necessary cool-down. A third project started is the actual decommissioning project, TYKO, benefiting from experience gained and staff involved in still ongoing decommissioning of a legacy materials reactor, i.e. the Studsvik R2/R2-0 reactor. The planning and experience to date for the three projects will be presented in the paper, as well as lessons-learned and future plans, including some critical items identified wrt dismantling and site function transfer. Half of the nuclear units in Sweden, six units, and one legacy power reactor, will be starting decommissioning within the next few years. Impacts on the back-end system; the financial situation, with respect to the state-controlled financial funding; and the supplier market are discussed in the paper. Furthermore, the planning process and the planned management of the interfaces between the involved organisations is described. (authors)
Reactor operator-in-the-loop dynamic modelling - 122
The description of human operator dynamic characteristics in mathematical terms compatible with control engineering practice is an essential prerequisite to the analytical treatment of manual reactor control systems. Safe reactor operation requires effective operator control through interaction with plant dynamics, manipulators and displays. Traditional static analysis methods consider only specific situations; they fail to adequately explain the mutual interactions between the operator and the reactor plant characteristics. In this paper we investigate the theory for describing operator-reactor characteristics based on the methods of conventional control engineering techniques. The primary purpose of the experiments reported is the validation of the quasi-linear operator model. (authors)
Coupled CFD-DEM Analysis of Molten Salt-Cooled Pebble-Bed Reactor Experiment
The development of new nuclear reactor designs is an area of ongoing investigation, and a focus of dedicated work for various laboratories around the world. Despite the steadfast and reliable service of Light Water Reactors (LWR), the ideal power reactor, with a combination of high operational temperature, passive safety, proliferation resistance, economic build and waste minimization remains elusive. One promising design that might address these diverse, and at times contradictory requirements, is the Molten Salt Reactor (MSR). In its most radical form, a liquid fueled (LF) MSR has the nuclear fuel dissolved in the molten-salt primary coolant itself, as demonstrated by Oak Ridge National Lab (ORNL) in 1965 to 1969. An alternative fuel arrangement is to retain conventional, solid fuel elements. A proposed method is to implement pebble fuel elements, as have been used in previous gas-cooled reactors, with the gas coolant being replaced with a molten salt. This is referred to as pebble-bed, molten-salt reactor (PB-MSR). The spherical fuel pebbles used within PB-MSRs contain TRISO particles dispersed throughout the pebble's graphite matrix. Many pebbles are constrained to form a porous bed within the core region of a reactor. Coolant molten-salt passes through the pebble bed to remove heat produced due to the nuclear fission taking place within the fuel pebbles' TRISO particles. Various benefits are apparent with the PB-MSR design. When considering the choice of fuel elements, they are a geometry that has been produced and utilized in a similar way in the past, within gas-cooled reactors. The fuel pebbles are also able to be added to, and removed from, the core during operation, enabling on-line refueling. When considering the coolant choice, molten-salts have much higher boiling points (1703 K at 1 atm. for FLiBe) than conventional coolants such as water (630 K at 150 atm.), and are capable of reaching these temperatures at atmospheric pressure. This in turn removes the need for high pressure containment that is present in light water reactors and gas-cooled reactors. The future implementation of new reactors, and the search for improvements in efficiency and safety in current designs, require the advancement of simulation tools, which this work ultimately aims to address.
DEVELOPMENT AND DEMONSTRATION TESTBED FOR THE REMOTE OPERATIONS AND MONITORING OF MICROREACTORS
The nuclear industry is rapidly developing many advanced-reactor concepts for near-term deployment in both traditional and non-traditional nuclear-powered applications. One such category of advanced reactor is the microreactor, a class of reactor with less than 20MWth power output, intended for applications where the economics or logistics of traditional power sources are difficult. This includes applications such as remote communities, mining sites, defense installations, or humanitarian and disaster-relief missions. One key enabling feature for the successful deployment of microreactors is a remote operations capability. Remote operations provide monitoring and control capabilities which can significantly reduce staffing costs by eliminating the need for licensed operators at each reactor facility and improve the economic viability for microreactor deployment. A remote concept of operations is not currently an established capability in the nuclear industry. In addition, no demonstration microreactor is expected to complete construction or go critical until at least 2026. This leaves two major capability gaps: the successful demonstration of a remote concept of operations for microreactors and a test bed suitable for said demonstration. Both gaps must be addressed in order to advance the remote concepts of nuclear operation and, more broadly, microreactors themselves from paper to reality. This paper aims to fill these gaps and describes a test bed that would support development and deployment of a remote concept of nuclear operations, initial experimental results from that test bed, and the application of the test bed and experimental results for a digital-twin-based remote concept of operations underdevelopment at Idaho National Laboratory (INL). The platform chosen as a remote concept of nuclear operations test bed is the Single Primary Heat Extraction and Removal Emulator, known as SPHERE, located at INL. SPHERE is a small-scale non-nuclear test bed that emulates thermal behavior of a microreactor. The small-scale and non-nuclear nature of SHPERE limit safety concerns associated with remote operations while still providing the physical response representative of a microreactor. A network connection was added to SPHERE that enables remote-monitoring capability. This allows for real-time data streaming to networked workstations, data historians, and human-machine interfaces (HMIs). These are all critical components in a remote concept of operations, thus providing a robust development and demonstration platform. An initial experiment was performed using the SPHERE remote operations testbed. This included running a comprehensively instrumented SPHERE through a series of steady-state and transient operating scenarios in both normal and abnormal operating conditions, all while streaming live test data to a remote HMI and data warehouse. This initial experiment served three purposes: (1) characterizing the response of SPHERE, (2) demonstrating the remote connection to SPHERE, and (3) providing a baseline data set for development of a digital-twin-based remote concept of operations that is under development at INL.
International Good Practice in Preparing for Decommissioning - 18404
The transition of a nuclear facility from operation to the implementation of dismantling is a critical phase in every decommissioning project. Several organizational and technical modifications are needed to adapt the facility to meet the new objectives and requirements. A variety of activities need to be planned and performed to support the transition and to prepare the dismantling of the facility. Experience has shown that it is essential to start with preparations for decommissioning at a very early stage, at best already during the design stage of the facility but at least during the operational stage. The preparation of the transition for decommissioning and dismantling (D and D) is a key issue for the success of the global D and D project to minimize delays and undue costs; to optimize personnel and other resources; and to initiate preparatory activities for decommissioning in a planned, timely and cost-effective manner and thus to ensure safe and efficient decommissioning. With the growing number of nuclear facilities reaching the decommissioning stage, the Working Party on Decommissioning and Dismantling (WPDD) within the Nuclear Energy Agency of OECD formed the Task Group on Preparing for Decommissioning. This group of experts include regulators, nuclear operators and independent experts to review the strategic aspects to optimize the preparations for decommissioning from the last years of operation onwards. This paper gives and overview of the work carried out by TGPFD between 2015 and 2017 and covers strategic approaches, issues and risks and observations of good practice rather than providing detailed descriptions of methods or technologies. (authors)
A literature review of pyroprocessing safeguards
Pyroprocessing is a promising technology for reprocessing used nuclear fuel (UNF) from light water reactors (LWR) and sodium fast reactors (SFR). With the advancement of fast reactors with projects from companies such as TerraPower, the prospects of pyroprocessing are more promising than ever before, as fast reactors can consume all actinides, not just uranium and plutonium. Before pyroprocessing can be implemented commercially, pre-existing safeguards used for aqueous reprocessing must be adapted for pyroprocessing. Safeguards, as determined by both the Nuclear Regulatory Commission (NRC) and the International Atomic Energy Agency (IAEA), are discussed in this review as guidelines for approaches used in both domestic and international reprocessing plants. The implementation of safeguards in aqueous reprocessing was then reviewed based on the experience from existing aqueous facilities. The experimental pyroprocessing facilities were identified as pyroprocessing plants in the design stage with one operating exception of the Fuel Conditioning Facility (FCF). The safeguard methods implemented or designed for each and the accompanying challenges of utilizing existing safeguards in pyroprocessing are considered and a summary of applicable approaches is included.
GNF fuel and channel performance: 2016 update
GNF2 is an advanced 10*10 BWR fuel design that was initially introduced in reload quantities in 2008. It has now replaced GE14 as the fuel design with the largest number of bundles in the operating fleet. Utilities are reaping the benefits of improved nuclear and thermal performance as well as high reliability. Transition to GNF2 fuel in the fleet is nearly complete with only three plants continuing to receive GE14 fuel in 2016. GNF2 reload bundles are now being discharged, and inspections have been completed on GNF2 bundles operated to over 61 GWd/MT and over 7.5 years. For both GE14 and GNF2, 2015 was a challenging year in terms of fuel reliability, with an increase in debris-related failures. The failures are concentrated in pumped-forward drain plants (that have long showed increased susceptibility to debris issues), plants with histories of recurrent debris failures, and in some cases in plants that had component failures or unusual or extensive maintenance or modifications. There have been no failures from causes other than debris. In GNF2, there are no failures due to manufacturing, PCI-type, dryout, or any form related to crud or corrosion. Operating experience in 2015 (and over the past decade) is discussed in terms of Failed Fuel Management, or operation with fuel failures in the core, and channel - control blade interference. (authors)
Integral Nuclear Data and Benchmarking Needs for Fusion Energy Systems
Fusion energy systems are currently being designed and optimized using radiation transport codes. To deal with the unique environment inside a fusion-based system, many of these designs incorporate novel materials able to withstand the high radiation fields, ensure adequate cooling and thermal protection, and produce tritium. Validation plays a vital role in building trust in the predictive power of these models and computational methods. Validation of a code consists of modeling documented real-world experiments and comparing the code-predicted response to the measured response. Adequate validation requires measured responses from real-world experiments, also known as integral data, that mimic the system being designed, including materials, impinging radiation, and temperature, among other variables. The most trusted integral data are experimental responses that have been through a rigorous benchmarking process that develops a recommended computational model and evaluates all experimental uncertainties. Finally, there are a few research groups around the world that have been producing integral data for fusion applications, but a substantial investment is needed to address the unique validation needs of the fusion community.
Salt International Collaborations FY24 Update
This report summarizes the international collaborations conducted by Sandia funded by the US Department of Energy Office (DOE) of Nuclear Energy (DOE-NE) Spent Fuel and Waste Science & Technology (SFWST) as part of the Sandia National Laboratories Salt R&D and Salt International work packages. This report satisfies the level-three milestone M3SF-24SN010303063. Several stand-alone sections make up this summary report, each completed by the participants. The sections discuss granular salt reconsolidation (KOMPASS/MEASURES), engineered barriers (RANGERS), numerical model comparison (DECOVALEX), an NEA Salt Club working group on the development of scenarios as part of the performance assessment development process, and progress on seal percolation experiments with German colleagues at Gesellschaft für Anlagen- und Reaktorsicherheit (GRS). Finally, we summarize events related to the US/German Workshop on Repository Research, Design and Operations.
Operating displays - new concept: high performance displays - 118
New control rooms in Nuclear Power Plants using digital Distributed Control System (DCS) operated with software displays, are providing thousands of signals to the operating crew. When an event happens, the Flood of information provided to operators could obscure the initiator event increasing the operator response time, work load and complicating the selection of the actions to be performed. There are some initiatives that are trying to minimize the 'avalanche effect' as the alarm engineering filtering and prioritization or diagnostic displays. Likewise, new control rooms are lost the availability to know the plant status just with a quick glance to the panel indicators. Regarding Small Modular Reactors, where in some cases four operators should monitor and control twelve reactors, these problems are even more significant. The challenge is to find a solution, based on current digital systems, that supply information to operators in order to prevent events and take early actions to minimize or avoid any unexpected incident. In order to minimize human errors, Tecnatom has developed a specific set of displays, called 'High Performance Displays' (HPD) based on objectives, work environment limitation, and non-anticipated events. These displays are being design following the HFE standards: applying the NUREG-0711 elements to identify the information that they have to content and the NUREG-0700 to design the interface. The function of these displays is monitoring the plant situation in a way that the operators are able to recognize any potential event at a simple glance but controlling thousands of signals through pattern recognition, symmetries, regular polygons and colors. The objective of the HPD is to provide an integrated function minimizing the tunnel effect and reduce the workload during the diagnosis phase. Moreover, HPD enhance operators to take the right actions to anticipate the response to any event, even avoiding it, if possible This paper analyzes how HPD's have been design as well as presents the results of a preliminary validation of their capabilities. The preliminary validation is a reduce validation in a full scope simulator running two representative scenarios of abnormal and emergency operation. The analysis is focused on the first stage of the event, i.e. the detection phase, HPD's have been installed in a generic full scope simulator of a nuclear power plant, digital controlled. Both scenarios have been performed by two different operator crews. The first operator shift has worked with the conventional human machine interface, that is, displays similar to the ones currently installed in existing nuclear power plant with digital control. The second crew, reproduce the same scenarios but with HPD available. The studio collects preliminary data in order to compare results, draw lesson learned from the experience to improve HPD design, and find solutions in terms of reducing human errors, human workload, and increase the availability of the plant. (authors)
The Study of TRR Radial Thermal Shielding Dismantling Process - 20063
The decommissioning of nuclear facilities has become an important worldwide topic because many nuclear power facilities will permanently cease operation in the foreseeable future. Taiwan Research Reactor (TRR) has stepped into the decommissioning phase in 2004, and the dismantling processes will start in 2022. TRR is a heavy water reactor designed by Canatom Company with output thermal power 40 MW. On January 3, 1973, it reaches criticality. TRR had been operated for 15 years and was permanently shut down in early 1988. The decommissioning plan of TRR was approved in 2004. According to the Nuclear Reactor Facilities Regulation Act in Taiwan, a nuclear facility must be dismantled in 25 years after stepping into the decommissioning phase. Therefore, TRR decommissioning must be completed before 2029. One of the most important tasks of TRR decommissioning is to dismantle reactor body. In the task of TRR decommissioning, mechanical cutting with remote handling is used to dismantle radial thermal shielding, which are the internal components of the TRR. This study outlines the internal components of the TRR and explains the difficulties encountered during the dismantling processes. Considering the structure and radiation dose rate of TRR and its internal components, the dismantling method and packaging method are properly arranged to complete the TRR dismantling task. This study describes the process of dismantling the radial thermal shielding during the dismantling processes and considers the impact of the radiation dose on the staff during the operation. The calculation of the radiation dose rate for the personnel during the segmentation process is based on the evaluation result by using VRdose. If the calculation of personnel working dose rate is too high, we will increase the shielding or use remote handling to reduce the operator's exposure dose in the dismantling processes to comply with the As Low As Reasonably Achievable (ALARA) principle. In this study, the latest developments in the TRR decommissioning program are described. It also provides usable experience and information regarding the future decommissioning of other nuclear facilities or nuclear power plants in Taiwan. (authors)