Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASMA PHYSICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Opacity on NIF: Anchor 2 Iron (Level 2 Milestone 7118 Report)

In FY2020 we fulfilled the exit criteria of milestone 7118. We fielded iron opacity experiments at higher densities and temperatures approaching anchor 2 conditions and made good progress on overcoming the problems that we found. This report describes in detail the progress that has been made. We presented the results in a LANL seminar on August 10 and we gave two talks on our results to the National Opacity Workshop Series, one on July 9 and the other on September 14. Before discussing the anchor 2 measurements, we present an update of the NIF anchor 1 data. We did a new analysis of the anchor 1 data and compared the results to a series of calculations using the LANL ATOMIC code. Figures 1 and 2 compare the data with the best-fit to calculations. This result is significantly improved over the result published in Atoms. The differences are small for the iron quasi-continuum between 8-9.5 Å and for the Mg Heα and Lyα lines. The opacities near the centers of the iron bound-bound features also match fairly well in the 9.5-12.5 Å range. However, the opacity windows between the large iron bound-bound features are deeper in the Atomic predictions than the measurement. Furthermore, large discrepancies exist for the Mg He β, γ, and δ lines and for the short-wavelength quasicontinuum. The experiment and analysis refinements described below have set the stage for unraveling these discrepancies. Specifically, we can repeat the Anchor 1 experiments using improved backlighter, hohlraum, and spectrometers to obtain reduced backgrounds and better spectral resolution. Exploiting the AlMg calibration experiments and repeating the Anchor 1 measurements multiple times will enable formal and rigorous uncertainty determination. This well-defined path gives us confidence that high quality opacity data can be obtained on NIF.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Conference Grant Report

The University of California San Diego (UCSD), hosted the High Energy-Density Science Summer School from July 28 – August 11, 2019 on the UC San Diego campus. The goal of the Summer School series was to introduce new talent to the breadth of the U.S. High Energy Density Science (HEDS) community through lectures, engaging workshops, and discussion sessions with leaders in academia and the national laboratories. The objectives are to inspire young scientists to pursue graduate and professional careers in the fields of high energy density science, teach them fundamental HED science and critical skills, and grant them the opportunity to network with leading academic and national laboratory researchers. Our focus was to attract promising early-career students from across the country.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On Principles, Values, Metrics and Criteria for the Development of Magnetic Fusion Energy

Fusion energy holds the promise of providing abundant, safe, clean and environmentally sustainable power for the foreseeable future. Hence, fusion has enormous potential to benefit society if it can be developed into a commercial energy source in a timely manner. However, the task of developing fusion energy is a challenging endeavor and it is believed that it will take several decades in order to reach the final goal. Hence, it is imperative to develop a strategic plan and to periodically revise and update this plan. In 2017, the Department of Energy (DOE) Office of Fusion Energy Sciences (FES) commissioned the National Academy of Sciences (NAS) to provide a long term strategic plan for magnetic fusion energy (MFE). In turn, the MFE community mobilized to provide input to the NAS panel. This resulted in a series of US Magnetic Fusion Energy Research Strategic Directions (US MFRSD) Workshops.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High-Density Implosions on OMEGA and the National Ignition Facility (NIF) (Final FY23 report for the subcontract B656484 (formerly B640112))

This final FY23 report for the subcontract B656484 (formerly B640112) “High-Density Implosions on Omega and the National Ignition Facility (NIF)” summarizes MIT’s support of LLNL experiments at OMEGA and the NIF with nuclear diagnostics, platforms and analysis, and of training PhD students. Overall, the tasks identified as Statement-Of-Work (SOW) items for FY23 were accomplished.

42 ENGINEERING↗

LLNL FESP Theory Highlights: November 2024

This talk presented a refined understanding of plasma-facing thermionic emitter cathodes by examining the limitations of the conventional space charge-limited model, which overlooks ion trapping dynamics within the virtual cathode. While conventional theory distinguishes between temperature-limited and space charge-limited regimes based on electron current constraints, recent findings reveal that trapped ions can form a quasi-neutral "second plasma," expanding upstream and interacting with the primary plasma. These effects are amplified in non-planar geometries, such as cylindrical or spherical sheaths, where trapped ions create a positive feedback loop with the upstream plasma. To address these phenomena, a new "Aid-and-Compete" model was developed, offering insights into current enhancement and sheath mode transitions relevant for plasma devices, including emissive cathodes in electric propulsion, fusion applications, thin film deposition systems, and plasma diagnostics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Breaking Beams: A Kinetic Treatment of the Filamentation and Forward Scatter of Laser Beams in Plasma (Abbreviated Final Report)

Precise and predictable propagation and deposition of laser energy in high energy density (HED) plasma is threatened by the breakup of the beam into filaments. Such filaments can be deflected and sprayed but also locally intensify the light, increasing the likelihood of other problematic interactions with the plasma. Adequately modeling, anticipating, and avoiding such processes in HED experiments requires a thorough understanding of the thresholds and nonlinear saturation mechanisms, particularly for the weakly collisional, high temperature plasmas achieved at the National Ignition Facility (NIF).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Breaking Beams: A Kinetic Treatment of the Filamentation and Forward Scatter of Laser Beams in Plasma

Precise and predictable propagation and deposition of laser energy in high energy density (HED) plasma is threatened by the breakup of the beam into filaments. Such filaments can be deflected and sprayed but also locally intensify the light, increasing the likelihood of other problematic interactions with the plasma. Adequately modeling, anticipating, and avoiding such processes in HED experiments requires a thorough understanding of the thresholds and nonlinear saturation mechanisms, particularly for the weakly collisional, high temperature plasmas achieved at the National Ignition Facility (NIF).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

2024 NSF CAREER Research Summary

My current research goals have adjusted from a sole focus on Rayleigh-Taylor (RT) driven Biermann Battery magnetic field growth to RT-driven magnetic reconnection caused by distortion of an imposed magnetic field or self-generated fields. The majority of work from 2024 focused on single-fluid extended-MHD studies of Biermann battery magnetic field generation during the Rayleigh-Taylor instability and its impacts on turbulent growth. R-T driven magnetic field growth can produce notable effects during the deceleration-phase of ICF experiments, though theoretical analysis indicates the impacts will be inconsequential for astrophysical turbulence dominated by high strength external fields. This research pivot provides greater application to a wider range of conditions, which now include astrophysics along with ICF.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Solving the Pulsed-Power Driven Inertial Fusion Energy Standoff Problem (Abbreviated Final Report)

The standoff problem in pulsed-power driven IFE (Inertial Fusion Energy) refers to the problem of electrically connecting a fusion target with the driver in a way that preserves the driver/target interface in the presence of a large fusion energy release (100’s of megajoules to 1000 megajoules). High yield fusion drivers for stockpile stewardship applications have similar concerns, but without the complication of the high repetition rate needed for energy production. All proposed IFE or high yield systems have the challenge of protecting the reactor vessel and driver from the energy release, but pulsed power drivers have the additional challenge of establishing an electrical connection in a way that does not create excessive debris or require costly/massive structures that must be expendable. Fortunately, there are conceptual solutions in the form of very low mass transmission lines, usually in the form of wires or foils, since very little mass is needed to overcome the magnetic forces driving the transmission lines apart or provide a low resistance pathway given the short pulse duration of the driver. Several important aspects of the standoff problem were analyzed in the course of this LDRD project. Conceptual means of introducing the low mass transmission lines into the reactor chamber were proposed, including analysis of methods to retain the power flow gap between the electrodes in the presence of the chamber environment. The energy losses due to ohmic dissipation and magnetic acceleration of the low mass transmission lines were evaluated for candidate driver pulses and different transmission line masses, and the fluence of x-ray and neutron energy on the persistent power flow structures that must survive the pulse of energy were evaluated. Finally, means of rapidly pumping down the chamber were explored as a way to return the system to low pressure following the multi-atmosphere post-pulse pressure rise. The overall conclusion from the analysis is that, while the reactor environment creates stressful conditions for a low mass transmission line standoff system, there are concepts expending 10 kg or less of electrode mass each pulse with the potential to mitigate the stresses and successfully drive fusion targets. Whether such a system could lead to a practical and economical fusion reactor would require extensive research and development beyond the scope of the feasibility study.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasma Flow Reactor Investigation into Nucleation of Uranium Oxide on Silica Substrates to Better Understand Fallout Formation

Understanding particulate formation in nuclear debris is critical for predicting fallout transport after a nuclear event. Improved characterization of fallout formation and transport could lead to better guidance for emergency response in a post-detonation scenario. By analyzing how U-oxides nucleate onto different forms of SiO 2 (crystalline and amorphous), we can gain insight into how entrained environmental materials may incorporate into fallout. In this experiment a Plasma Flow Reactor (PFR), was used to replicate the high temperature and extreme flow conditions in a nuclear fireball. Uranyl nitrate was injected into the plasma, and PFR-generated Uranium oxides were allowed to condense onto amorphous (nanoparticles of varying sizes) or crystalline (quartz) SiO 2 substrates. SiO 2 substrates were characterized before and after U-oxide deposition using Scanning Electron Microscopy (SEM) based techniques (i.e. EDS) in order to characterize how U-oxides may nucleate onto these substrates. After a collection time of 4 minutes at an RF coil distance of 25cm, both the amorphous SiO 2 nanoparticles and the crystalline structures demonstrated dendritic nucleation of U-oxide species as identified by SEM/EDS.

54 ENVIRONMENTAL SCIENCES↗

Progress in Understanding Error-field Physics in NSTX Spherical Torus Plasmas

The low aspect ratio, low magnetic field, and wide range of plasma beta of NSTX plasmas provide new insight into the origins and effects of magnetic field errors. An extensive array of magnetic sensors has been used to analyze error fields, to measure error field amplification, and to detect resistive wall modes in real time. The measured normalized error-field threshold for the onset of locked modes shows a linear scaling with plasma density, a weak to inverse dependence on toroidal field, and a positive scaling with magnetic shear. These results extrapolate to a favorable error field threshold for ITER. For these low-beta locked-mode plasmas, perturbed equilibrium calculations find that the plasma response must be included to explain the empirically determined optimal correction of NSTX error fields. In high-beta NSTX plasmas exceeding the n=1 no-wall stability limit where the RWM is stabilized by plasma rotation, active suppression of n=1 amplified error fields and the correction of recently discovered intrinsic n=3 error fields have led to sustained high rotation and record durations free of low-frequency core MHD activity. For sustained rotational stabilization of the n=1 RWM, both the rotation threshold and magnitude of the amplification are important. At fixed normalized dissipation, kinetic damping models predict rotation thresholds for RWM stabilization to scale nearly linearly with particle orbit frequency. Studies for NSTX find that orbit frequencies computed in general geometry can deviate significantly from those computed in the high aspect ratio and circular plasma cross-section limit, and these differences can strongly influence the predicted RWM stability. The measured and predicted RWM stability is found to be very sensitive to the E × B rotation profile near the plasma edge, and the measured critical rotation for the RWM is approximately a factor of two higher than predicted by the MARS-F code using the semi-kinetic damping model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Bodies in flowing plasmas - Spacecraft measurements

Results are reviewed from in-situ measurements relevant to the interaction of bodies in flowing plasmas. A brief discussion is given of the interaction in the general context of space plasma physics, including possible applications to solar-system plasmas. Attention is given to the mode of experimentation in the Shuttle/Spacelab era. It is noted that the majority of in-situ investigations during the past decade were limited to the very near surface of ionospheric satellites. It is expected that experiments to be carried out on board the Spacelab/Orbiter will make possible well-planned controlled experiments in the area of body-plasma interactions in its widest sense.

Samir, U.↗

Large loop thermal models of solar hard X-ray bursts

Results for small loop thermal models of hard X-ray bursts are extended to large loops. In this model a magnetic arch with a coronal length of 45,000 km has the electrons near the top heated to temperatures above 1 billion K. The resulting conduction fronts which form are dominated by collisionless processes and travel down the arch to the transition region and chromosphere where they evaporate off part of the latter. This relatively cool material travels back up the loop and eventually quenches the source for energy injection times of order 10 sec. Most of the X-ray emission comes from the footpoints of the arch over most of the source lifetime and the spectrum is a power law with a typical spectral index of 3.0. Even though the efficiency gain in this model is only 2.8, it is much easier from the point of view of plasma physics to heat all the electrons in a plasma than to accelerate a substantial fraction of them.

Smith, D. F.↗

The last disconnection events in Comet Halley in April 1986

Disconnection event (DE) in cometary plasma physics is the regular loss of the entire plasma tail and the growth of the new one. Analysis of a sequence of DEs that occurred 13-18 April, 1986 shows that they correlate well with a magnetic, sector-boundary crossing and a complex magnetic structure in the solar wind with polarity reversals that occurred about one day later. These events are entirely consistent with sunward, magnetic reconnection as the DE mechanism.

Brandt, John C.↗