Search NASA⌕ Search

SEARCH · Search NASA

Results for “REFLECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Reflection-time-of-flight spectrometer for two-electron (e,2e) coincidence spectroscopy on surfaces

In this article, a novel time-of-flight spectrometer for two-electron-emission (e,2e/{gamma},2e) correlation spectroscopy from surfaces at low electron energies is presented. The spectrometer consists of electron optics that collect emitted electrons over a solid angle of approximately 1 sr and focus them onto a multichannel plate using a reflection technique. The flight time of an electron with kinetic energy of E{sub kin}{approx_equal}25 eV is around 100 ns. The corresponding time- and energy resolution are typically {approx_equal}1 ns and {approx_equal}0.65 eV, respectively. The first (e,2e) data obtained with the present setup from a LiF film are presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

High order reflectivity of highly oriented pyrolytic graphite crystals for x-ray energies up to 22 keV

We used Kr K{alpha} (12.6 keV), Zr K{alpha} (15.7 keV), and Ag K{alpha} (22.2 keV) x-rays, produced by petawatt-class laser pulses, to measure the integrated crystal reflectivity R{sub int} of flat highly oriented pyrolytic graphite (HOPG) up to the fifth order. The maximum R{sub int} was observed in first order (3.7 mrad at 12.6 keV), decreasing by a factor of 3-5 for every successive order, and dropping by a factor of 2-2.5 at 22.2 keV. The current study indicates that HOPG crystals are suitable for measuring scattering signals from high energy x-ray sources (E{>=}20 keV). These energies are required to penetrate through the high density plasma conditions encountered in inertial confinement fusion capsule implosions on the National Ignition Facility.

07 ISOTOPE AND RADIATION SOURCES↗

Reflectivity and structural evolution of Cr/Sc and nitrogen containing Cr/Sc multilayers during thermal annealing

It is shown that the thermal stability in vacuum of Cr/Sc multilayer thin films used as reflective optical components in soft x-ray instrumentation has substantial dependence on incorporation of N. The thermal stability is increased by incorporating 34 at.% of N in Cr/Sc multilayers. A pure Cr/Sc multilayer x-ray mirror starts a continuous degradation already at {approx}100 deg. C with a complete destruction of the multilayer at 500 deg. C. The resulting structure is a mixture of Cr and Sc nanocrystallites. The degradation can be described by linear diffusion theory and is suggested to be due to the formation of uniformly distributed phase-separated nanocrystallites followed by an Ostwald ripening process with an apparent activation energy of 0.5 eV. At the multilayer-substrate interface, a 7 nm thin Sc-Si layer is formed which effectively hinders indiffusion of Si and outdiffusion of Cr and Sc. A nitrided multilayer, initially consisting of crystalline fcc CrN{sub x} and fcc ScN{sub y} layers (x and y<1), is observed to improve in structural quality up to {approx}250 deg. C where it is stable for more than 12 h. At {approx}330 deg. C, the multilayer separates into regions with two multilayer periods, differing by less than 0.04 nm, which are stable at 420 deg. C over an extended period of time >40 h. It is proposed that the separation into the different multilayer periods is a consequence of redistribution of N within the Cr layers. Sc is observed to be stabilized in the ScN layers, which, in turn, inhibit the formation of a Sc-Si barrier layer at the substrate leading to a strong exchange of Si and Cr across the film substrate. This leads to a Cr-Si/ScN layered structure close to the substrate and chromium silicide crystallites inside the substrate. Close to the top of the multilayer, a CrN/ScN multilayer appears to be retained.

36 MATERIALS SCIENCE↗

High accuracy subwavelength distance measurements: A variable-angle standing-wave total-internal-reflection optical microscope

We describe an extension of the total-internal-reflection microscopy technique that permits direct in-plane distance measurements with high accuracy (<10 nm) over a wide range of separations. This high position accuracy arises from the creation of a standing evanescent wave and the ability to sweep the nodal positions (intensity minima of the standing wave) in a controlled manner via both the incident angle and the relative phase of the incoming laser beams. Some control over the vertical resolution is available through the ability to scan the incoming angle and with it the evanescent penetration depth.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A New Retrieval of Aerosol Optical Depth under Partly Cloudy Conditions with Multi-Spectral Measurements of Reflectance

The three-dimensional (3D) radiative effects may cause large uncertainties of satellite aerosol retrievals under partly cloudy conditions [1,2]. For example, analysis of multi-year aerosol statistics derived from the MODerate-Resolution Imaging Spectroradiometer (MODIS) data in clear patches of cloud fields suggests that aerosol product may be in a large error (up to 140%) as a result of 3D cloud-induced enhancement of clear sky reflectance [3]. Retrievals of AOD τa from satellite observations consist of two basic steps: (1) sampling, which includes detection of clear pixels and (2) and application of an algorithm, which estimates AOD in these pixels. The quality of the final product depends on both steps [4]. The largest errors occur for pixels located within areas of sunlight and shadows where the 3D radiative effects have the greatest impacts on the AOD retrievals [2]. To reduce the 3D radiative effects, clear pixels have to be selected far away (~1-2 km) from clouds and their shadows [3]. For selected clear pixels, the independent pixel approximation approach (IPA) [5] is used to estimate the AOD. Since the IPA ignores the 3D cloud-induced enhancement, the IPA-based retrievals can substantially overestimate AOD even for these clear pixels. To take into account such enhancement, a simple parameterization has been suggested [6]. Here we introduce an approach [7], that provides an effective way to avoid the 3D cloud effects, and illustrate with a model-output inverse problem its capability to detect clear pixels (outside of shadows) and estimate their AOD.

54 ENVIRONMENTAL SCIENCES↗

Annealing Behavior of Atomic Layer Deposited HfO2 Films Studied by Synchrotron X-ray Reflectivity and Grazing Incidence Small Angle Scattering

New results are presented for the annealing behavior of ultrathin complementary-metal-oxide-semiconductor (CMOS) gate dielectric HfO{sub 2} films grown by atomic layer deposition (ALD). A series of ALD HfO{sub 2} dielectric films has been studied by a combination of x-ray reflectivity (XRR) and grazing-incidence small-angle x-ray scattering (GISAXS) measurements. By using these techniques together, we have shown that the surface, interfaces, and internal structure of thin ALD films can be characterized with unprecedented sensitivity. Changes in film thickness, film roughness, or diffuseness of the film/substrate interface as measured by XRR are correlated with the corresponding changes in the internal film nanostructure, as measured by GISAXS. Although the films are dense, an internal film structure is shown to exist, attributed primarily to {approx} 2 nm 'missing island' porosity features close to the substrate; these are most likely associated with coalescence defects as a result of initial ALD growth, as they are not observed in the upper regions of the film. Some 8-9 nm heterogeneities are also present, which may indicate a widespread modulation in the film density pervading the entire film volume, and which likely also give rise to surface roughness. Comparison of the data between different scattering geometries and among a carefully designed sequence of samples has enabled important insights to be derived for the annealing behavior of the ALD HfO{sub 2} films. The main effects of single, brief, high temperature excursions to above 900C are to anneal out some of the fine voids and reduce the mean roughness and interfacial diffuseness of the film. These changes are indicative of densification. However, depending on the film thickness, the annealing behavior at temperatures between 650 and 800C is quite different for single excursion and cyclic anneals. Particularly for thin, just-coalesced films, XRR indicates marked increases in the film thickness and in the mean roughness/diffuseness dimension for cyclic anneals. GISAXS also shows an increase, rather than a reduction, in the void microstructure under these conditions. These changes in the film microstructure appear sufficient to overcome the expected film densification at elevated temperatures with implications for the gate dielectric performance of the films after extended high temperature exposure and cycling, as may occur during gate dielectric fabrication.

36 MATERIALS SCIENCE↗

Optical characterization of thin nickel films on polymer substrates using reflectance difference spectroscopy

We have used reflectance difference spectroscopy (RDS) and its extension, azimuth-dependent RDS (ADRDS), to study the properties of sputtered and evaporated nickel films on biaxially oriented poly(ethylene terephtalate) (PET) films in a roll to roll web-coating process. From the full set of ADRDS spectra we extract and analyze both the intrinsic RDS spectra and the azimuthal orientation of the effective optical anisotropy of the samples. From the latter, contributions to the RDS spectra arising from the nickel layer and the PET substrate with different orientations of the optical eigenaxes can be inferred. We find an attenuation of the characteristic RDS signal of the PET substrate with increasing nickel film thickness which is in good agreement with the theoretical prediction. For film thicknesses above 20 nm another contribution to the RDS signal attributed to the optical anisotropy of the deposited nickel layers can be observed. Its strength depends on the deposition method, and is considerably larger for evaporated films than for sputtered ones. With increasing nickel film thickness, the azimuthal orientation of the sample anisotropy changes from the initial value of the PET substrate by about 20 deg.toward the machine direction of the foil. We demonstrate that RDS is also a valuable tool for inline monitoring in the roll to roll process, as the attenuation of the RDS signal, under proper consideration of the orientation of the effective anisotropy, is a function of the film thickness and characteristic for the deposited material.

36 MATERIALS SCIENCE↗

Longitudinal and transverse magnetization components in thin films: A resonant magnetic reflectivity investifation using circularly polarized soft x-rays

An in-plane vectorial analysis of the magnetization of thin magnetic films is presented. Longitudinal soft x-ray resonant magnetic reflectivity curves display characteristic nodes where the longitudinal scattering component is suppressed by x-ray interference. The transverse magnetic component can be effectively retrieved at these nodal points, despite the use of circular polarization and longitudinal scattering geometry. Using a single geometric configuration, transverse and longitudinal magnetic hysteresis loops can be clearly separated. Calculations based on a Stoner-Wohlfarth model satisfactorily describe both loops. Therefore, this method presents a viable alternative to standard vectorial analysis techniques, with the additional benefit of element specificity.

36 MATERIALS SCIENCE↗

Plasma reflection from highly Si-doped InGaAs/AlAsSb quantum wells

In this study, we have evaluated the plasma reflection from highly Si-doped In{sub 0.53}Ga{sub 0.47}As/AlAs{sub 0.56}Sb{sub 0.44} multiple quantum wells (MQWs) in order to understand the plasma effect in quantum wells. Plasma resonances were clearly observed in these MQWs for carrier densities larger than 7.5x10{sup 18} /cm{sup 3}. By comparing the experimentally obtained wavenumbers of these plasma resonances with those obtained from a theory and an empirical fit of bulk InGaAs which includes the effect of conduction band non-parabolicity, the plasma resonances of MQWs were found to match well with the empirical fit. This implied that the conduction band non-parabolicity played a role in modifying the plasma resonance, as in bulk InGaAs.

36 MATERIALS SCIENCE↗

Quasilinear Wave 'Reflection' Due to Proton Heating by an Imbalanced Turbulent Cascade

We investigate the quasilinear effects of the resonant wave-particle interaction under conditions of imbalanced turbulent heating in the collisionless coronal hole. We find that velocity-space transport of protons from the heated part of the distribution leads to strong wave growth in the minority (sunward) direction. In the present quasilinear analysis, the 'reflected' waves grow to unphysical levels, indicating the necessity of including nonlinear processes. This mechanism is likely to be important in development of the fast solar wind, and may explain the puzzling minor ion observations of Landi and Cranmer (2009).

79 ASTRONOMY AND ASTROPHYSICS↗

On the observation of multiple volume reflection from different planes inside one bent crystal

An interpretation of the first experiment on the observation of 400 GeV proton multiple volume reflection from different skew planes of one bent crystal (MVROC) is given. The possibilities of experimental observation of MVROC at lower particle energies are demonstrated. New features of the effect of particle capture into the channeling regime by bent skew planes are revealed as well as optimal choice of main crystal axis, crystal thickness, and beam orientation with respect to the crystal is discussed.

43 PARTICLE ACCELERATORS↗

Intracavity Laser Refractometry In Reflection: Development And Implementation In Biomedical Investigations

The Intracavity Laser Refractometry in Reflection (ILRR) method is developed for precise investigation of the processes on an interface of different media in real time. This method is very attractive for the study of biological liquids. It is based on the control of two-mode phase-anisotropic laser spectrum. In the aggregate the values of the sensitivity, time of measuring, potential parameters of investigated media of ILRR method correspond to the best results in optical refractometry. The absolute value of refractive index correlates with the course of different diseases. It can serve the objective parameter for an estimation of a level of illness processes in organism and drug efficiency. In result of the investigation of the photoresponse of the blood to low-level laser irradiation both the slow thermal effect and fast biophysical effect were discovered. The refractive index behaviour in real time allows the photoacceptors and maximum therapeutic doses on organism, cellular, and molecular levels to be determined.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Shape error analysis for reflective nano focusing optics

Focusing performance of reflective x-ray optics is determined by surface figure accuracy. Any surface imperfection present on such optics introduces a phase error in the outgoing wave fields. Therefore converging beam at the focal spot will differ from the desired performance. Effect of these errors on focusing performance can be calculated by wave optical approach considering a coherent wave field illumination of optical elements. We have developed a wave optics simulator using Fresnel-Kirchhoff diffraction integral to calculate the mirror pupil function. Both analytically calculated and measured surface topography data can be taken as an aberration source to outgoing wave fields. Simulations are performed to study the effect of surface height fluctuations on focusing performances over wide frequency range in high, mid and low frequency band. The results using real shape profile measured with long trace profilometer (LTP) suggest that the shape error of {lambda}/4 PV (peak to valley) is tolerable to achieve diffraction limited performance. It is desirable to remove shape error of very low frequency as 0.1 mm{sup -1} which otherwise will generate beam waist or satellite peaks. All other frequencies above this limit will not affect the focused beam profile but only caused a loss in intensity.

43 PARTICLE ACCELERATORS↗

Development of the Channel Cut Monochromator with Curved Reflecting Surfaces at NSRL

To simplify the complicated mechanism of the traditional double crystal monochromator for synchrotron radiation, a kind of channel cut monochromator with curved reflecting surfaces to fix the exit beam position was successfully developed at NSRL. The performance of this monochromator, which includes the relative efficiency, diffraction bandwidth and deviation of the beam spot, was calculated and measured. The analysis of these results are presented in this paper.

43 PARTICLE ACCELERATORS↗

Reflection high-energy electron diffraction phi scans for in situ monitoring the heteroepitaxial growth of Fe on GaN(0001) by molecular beam epitaxy

The heteroepitaxial growth of Fe films on GaN(0001) by molecular beam epitaxy is monitored in situ by reflection high-energy electron diffraction phi scans. The complex epitaxial orientation-relationship between Fe and GaN can be visualized by these phi scans already at an Fe coverage of two monolayers. By comparing the data to ex situ x-ray phi scans, we show that these measurements even allow a quantitative determination of the in-plane orientation-distribution of the heteroepitaxial film. The orientation-distribution is minimized for a growth temperature of 350 deg. C.

36 MATERIALS SCIENCE↗

X-ray reflectance studies of interface in ion beam sputtered CoFeB/MgO bilayers

This letter reports specular and diffuse x-ray reflectance studies of the interface in the ion beam sputtered CoFeB({approx}5-8 nm)/MgO({approx}2-5 nm) bilayers. The study reveals the specific roles of oxygen ion energy, substrate temperature, and reactive gas ambient on controlling the interface width in the bilayers. Depending on oxidation-method employed for MgO growth the interface width varies between 0.51 and 0.20 nm. Energy of assist ions ({<=}50 eV) plays a key role compared to the growth temperature in determining the sharpness of the interface. The bottom grown CoFeB exhibited significant increase in coercivity (H{sub C}), which also depends on MgO-growth process.

36 MATERIALS SCIENCE↗

Experimental Investigation of the Reflection Mode Micro Laser Propulsion under Highly Frequent and Multi Pulse Laser

Micro laser propulsion used for some space tasks of micro-satellites are preferred to providing small thrust and high specific impulse while keeping power consumption low. Most previous work on micro laser propulsion are about transmission mode (T-mode) using a CW laser. In this article, a pulsed fiber laser is used to study the micro laser propulsion performance under reflection mode. Multi pulse (ranged from 100 to 2000) tests are conducted on a double base propellant with the vacuum less than 10 Pa. The laser frequency is 20 kHz and two kinds of instantaneous power density 4.77x10{sup 6} W/cm{sup 2} and 2.39x10{sup 7} W/cm{sup 2} are used. It is found that the momentum coupling coefficient C{sub m} and the mean thrust F increases with the increasing pulse numbers, which is different to the previous work. By adjusting the irradiation time T, it is easy to get a large mean thrust, up to mN. When the energy density is the same, C{sub m}, I{sub sp}, F and {eta} increase with the increasing power density. Also I{sub sp} and {eta} are very low, laser ablation is insufficiently under the current condition. 3D Morphology of the ablation hole is obtained by confocal microscope for the first time.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗