Search NASA⌕ Search

SEARCH · Search NASA

Results for “Recovery Testing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Switching speed limits in electrically driven VO 2 structural Mott–Peierls transition

Mott materials are archetypal quantum systems actively explored as next-generation electronic and photonic platforms, with potential applications spanning non-Von Neumann computing, robotics, energy storage, and microwave technologies. Among these, vanadium dioxide (VO 2 ) has emerged as one of the most intensively studied compounds, owing to its sharp, near-room-temperature insulator-to-metal phase transition. VO 2 also serves as a benchmark system for testing cutting-edge theories and experimental techniques. Here, we directly visualize the electrically driven transition dynamics in VO 2 using a microwave-driven, frequency-tunable pulsed transmission electron microscope that combines nanometer spatial and picosecond temporal resolution. Under high-frequency (MHz–GHz) excitation, we capture the ultrafast nucleation, propagation, and dissolution of metallic domains within an operating device over millions of reversible cycles. We observe the ultrafast formation of consistent metallic nuclei beneath the electrodes, followed by the propagation of a structural phase front at 4.54 nm/ns. Our experiments show that phonon-mediated structural recovery ultimately limits reversible switching of VO 2 at GHz frequencies, and that a tunable regime for reversible operation spans from kHz to GHz through device engineering. Beyond VO 2 , our approach provides a powerful framework for probing non-equilibrium structural transformations in correlated and functional materials under realistic electrical stimuli.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Supercritical Treatment Technology for Water Purification (Annual Final Report)

This project continued the development of the Supercritical Water Extraction – Enhanced Targeted Recovery (SWEETR™) technology, a novel desalination process for treating hypersaline brines. The overall objective is to demonstrate the technical and economic feasibility of an innovative, energy efficient, and robust supercritical desalination technology to treat hypersaline solutions and separating saltwater into a pure water stream and valuable recovered solids, resulting in zero liquid discharge (ZLD). The proposed technology, focuses on innovative methods of applying supercritical water to treat highly concentrated brine solutions without incurring a high energy penalty. Integrating the technology with solar energy reduces the energy cost for the system. The results obtained during the proof-of-concept testing demonstrate that the SWEETR™ concept is technically feasible and that supercritical water treatment is a viable option with strong merit for treating high salinity waters. The strategic design of the system provides the opportunity to localize the supercritical zone, which helps reduce the overall energy cost associated with the desalination process. The process can be tuned to remove only the amount of salts required to make the treated water “fit for purpose”, providing further opportunities to minimize energy costs. The ability to destroy organic compounds associated with the water while simultaneously being able to desalinate makes SWEETR™ uniquely fitted for treating aqueous streams such as produced water from oil and gas extraction which contain small amounts of organics. Such mixed contaminant streams pose an extreme challenge for other treatment options. Future work will further develop the SWEETR™ technology to take it from the bench-scale to the pilot-scale, and ready the technology for commercial application.

04 OIL SHALES AND TAR SANDS↗
DOE OSTI2017

Twin-Axis Elliptical Cavity

Energy Recovery Linacs (ERLs) use superconducting RF cavities to accelerate the primary electron beam while the spent electron beam is decelerated in the same cavities to recover the energy. Using separate beam pipes for the accelerated and decelerated beams allows for independent focusing and better merging of the beam from the injector into the ERL. In the frame of a DoE accelerator stewardship program we have designed and built a prototype 1.5 GHz twin-axis single-cell cavity as a proof of principle. Experiences on fabrication techniques and lessons learned will be reported prior to the vertical RF testing.

Marhauser, Frank↗
DOE OSTI2018

Optimal strategy for polarization modulation in the LSPE-SWIPE experiment

Context. Cosmic microwave background (CMB) B-mode experiments are required to control systematic effects with an unprecedented level of accuracy. Polarization modulation by a half wave plate (HWP) is a powerful technique able to mitigate a large number of the instrumental systematics. Aims. Our goal is to optimize the polarization modulation strategy of the upcoming LSPE-SWIPE balloon-borne experiment, devoted to the accurate measurement of CMB polarization at large angular scales. Methods. We departed from the nominal LSPE-SWIPE modulation strategy (HWP stepped every 60 s with a telescope scanning at around 12 deg/s) and performed a thorough investigation of a wide range of possible HWP schemes (either in stepped or continuously spinning mode and at different azimuth telescope scan-speeds) in the frequency, map and angular power spectrum domain. In addition, we probed the effect of high-pass and band-pass filters of the data stream and explored the HWP response in the minimal case of one detector for one operation day (critical for the single-detector calibration process). We finally tested the modulation performance against typical HWP-induced systematics. Results. Our analysis shows that some stepped HWP schemes, either slowly rotating or combined with slow telescope modulations, represent poor choices. Moreover, our results point out that the nominal configuration may not be the most convenient choice. While a large class of spinning designs provides comparable results in terms of pixel angle coverage, map-making residuals and BB power spectrum standard deviations with respect to the nominal strategy, we find that some specific configurations (e.g., a rapidly spinning HWP with a slow gondola modulation) allow a more efficient polarization recovery in more general real-case situations. Conclusions. Although our simulations are specific to the LSPE-SWIPE mission, the general outcomes of our analysis can be easily generalized to other CMB polarization experiments.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2019

Rapidly expanding nuclear arsenals in Pakistan and India portend regional and global catastrophe

Pakistan and India may have 400 to 500 nuclear weapons by 2025 with yields from tested 12- to 45-kt values to a few hundred kilotons. If India uses 100 strategic weapons to attack urban centers and Pakistan uses 150, fatalities could reach 50 to 125 million people, and nuclear-ignited fires could release 16 to 36 Tg of black carbon in smoke, depending on yield. The smoke will rise into the upper troposphere, be self-lofted into the stratosphere, and spread globally within weeks. Surface sunlight will decline by 20 to 35%, cooling the global surface by 2° to 5°C and reducing precipitation by 15 to 30%, with larger regional impacts. Recovery takes more than 10 years. Net primary productivity declines 15 to 30% on land and 5 to 15% in oceans threatening mass starvation and additional worldwide collateral fatalities.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2017

NBIC Biofeeds: A Digital Tool for Open Source Biosurveillance across Federal Agencies

The National Biosurveillance Integration Center (NBIC) is developing a scalable, flexible open source data collection, analysis, and dissemination tool to support biosurveillance operations by the U.S. Department of Homeland Security (DHS) and its federal interagency partners. The NBIC integrates, analyzes, and distributes key information about health and disease events to help ensure the nation’s responses are well-informed, save lives, and minimize economic impact. NBIC serves as a bridge between Federal, State, Local, Territorial, and Tribal entities to conduct biosurveillance across human, animal, plant, and environmental domains. The integration of information enables early warning and shared situational awareness of biological events to inform critical decisions directing response and recovery efforts. To meet its mission objectives, NBIC utilizes a variety of datasets, including open source information, to provide comprehensive coverage of biological events occurring across the globe. NBIC Biofeeds is a digital tool designed to improve the efficiency of reviewing and analyzing large volumes of open source reporting by biosurveillance analysts on a daily basis; moreover, the system provides a mechanism to disseminate tailored feeds allowing NBIC to better meet the specific information needs of individual, interagency partners. The tool is currently under development by the Department of Energy (DOE), Pacific Northwest National Laboratory (PNNL)and it is in a testing and evaluation phase supported by NBIC biosurveillance subject matter experts. Integration with the Defense Threat Reduction Agency (DTRA), Biosurveillance Ecosystem(BSVE) is also underway. NBIC Biofeeds Version 1 is expected to be fully operational in Fiscal Year 2017. The PNNL is applying agile methodology to streamline the build of NBIC Biofeeds to specifications required for operational use by NBIC and its federal interagency partners. Biosurveillance, analytics, and system engineering subject matter experts provide guidance on the implementation of features in the tool to ensure functionality aligns with operational workflows and production support. PNNL is leveraging software from a previous government effort to repurpose the technology to meet NBIC needs. NBIC Biofeeds incorporates the open source, document-orientated MongoDB database to capture user- and system-generated metadata on hundreds of thousands of records, in part, to establish baselines to aid prospective and retrospective analysis on emerging biological events. NBIC Biofeeds integrates a biosurveillance taxonomy (uniquely developed by NBIC),which includes input from interagency partners to recognize critical characteristics of a biological event. In NBIC Biofeeds Version1, metadata capture of reported events is done manually by NBIC analysts; however, moving forward in Version 2, the tool will be further automated to flag significant reporting on biological events with a human remaining in the loop to confirm the validity of the system-generated tags. To serve as a one-stop tool for open source biosurveillance, NBIC Biofeeds automatically harvests information from thousands of websites, utilizing third party aggregators, paid subscriptions to data feeds, and scraping of high priority sources. Users can develop desired queries for automatic updating, leverage a unique review and curation mechanism, and further analyze data from topical, geographic, and temporal visualization features in the tool. To meet NBIC’s information sharing needs, the tool allows for design of tailored RSS feeds and electronic message-based delivery of analysis on biological events, intended for recipients in the government with unique missions around human, animal, plant, and environmental health. Through current testing and evaluation – underway by biosurveillance subject matter experts – NBIC Biofeeds is demonstrating value in supporting open source biosurveillance by the Center for more rapid recognition and sharing of key event characteristics. Centralizing access and analysis of this data set into a single system is increasing the efficiency of daily, global biosurveillance, while enhancing the value of information identified through use of the querying, curation, and production support features in the tool.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2019

In situ Preparation of HNbMoO{sub 6}/C Nanocomposite for Sensitive Detection of Clenbuterol

In this paper, we synthesized HNbMoO{sub 6}/C composite through the calcination of octylamine-intercalated HNbMoO{sub 6} precursor. The resulting HNbMoO{sub 6}/C composite showed some new phases of MoO{sub 2}, MoO{sub 3}, NbO{sub 2}, Nb{sub 2}O{sub 5}, and carbon, which was fully confirmed via powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), selected area electron diffraction (SAED), and X-ray photoelectron spectroscopy (XPS) technologies. Besides, the HNbMoO{sub 6}/C hybrid was coated on glass carbon electrode to construct an electrochemical sensor for sensitive determination of clenbuterol. The electrochemical behaviors of clenbuterol on the prepared electrode were tested by cyclic voltammetry (CV) and differential pulse voltammetry (DPV) analysis. The results showed that the intercalated carbon can act as active sites to accelerate electron transfer. In addition, more exposed surface areas of the HNbMoO{sub 6}/C composite will facilitate the electrolyte to permeate. The oxidation peak current of clenbuterol was linearly related to its concentration in the range of 1.04 × 10{sup −5} to 7.51 × 10{sup −4} mol L{sup −1}, and the determination limit was calculated to be 3.03 × 10{sup −6} mol L{sup −1} (S/N = 3). This sensor exhibits excellent stability, reproducibility, specificity, and good recoveries when applied to monitor clenbuterol in real samples.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Well Interference Diagnosis through Integrated Analysis of Tracer and Pressure Interference Tests

In ultra-low permeability reservoirs, communication between wells through connected fractures can be observed through tracer and pressure interference tests. Understanding the connectivity between fractured horizontal wells in a multi-well pad is important for infill well drilling and parent-child well interactions. Inter-well tracer and pressure interference tests involve two or more fractured horizontal wells and provide information about hydraulic fracture connectivity between the wells. In this work, we present a workflow based on combining the analysis of tracer and pressure interference data to obtain the degree of interference between fractured horizontal wells in a multi-well pad. We analyze well interference using tracer (chemical tracer and radioactive proppant tracer) and pressure data in an 11-well pad in the Permian Basin. Changes in pressure and tracer concentration in the monitor wells were used to identify and evaluate interference between the source and monitor wells. Extremely low tracer recovery and weak pressure response signify the absence of connected fractures and suggest that interference through matrix alone is insignificant. Combined tracer and pressure interference data suggest connected fracture pathways between the communicating wells. The degree of interference can be estimated in terms of pressure response times and tracer recovery. An effective reservoir model was used to simulate pressure interference between wells during production. Simulation results indicate that well interference observed during production is primarily due to hydraulically connected fractures. Combined tracer and pressure interference analysis provides a unique tool for understanding the time dependent connectivity between communicating wells, which can be useful for optimizing infill well drilling, well spacing and fracture sizing in future treatment designs.

Kumar, Ashish↗
DOE OSTI2017

Benefits of Integration of Aerojet Rocketdyne and RTI Advanced Gasification Technologies for Hydrogen-Rich Syngas Production

The key objective for this project was to evaluate the potential to achieve substantial reductions in the production cost of H 2 -rich syngas via coal gasification with near-zero emissions due to the cumulative and synergistic benefits realized when multiple advanced technologies are integrated into the overall conversion process. In this project, Aerojet Rocketdyne’s (AR’s) advanced gasification technology (currently being offered as R-GAS™) and RTI International’s (RTI’s) advanced warm syngas cleanup technologies were evaluated via a number of comparative techno-economic case studies. AR’s advanced gasification technology consists of a dry solids pump and a compact gasifier system. Based on the unique design of this gasifier, it has been shown to reduce the capital cost of the gasification block by between 40 and 50%. At the start of this project, actual experimental work had been demonstrated through pilot plant systems for both the gasifier and dry solids pump. RTI’s advanced warm syngas cleanup technologies consist primarily of RTI’s Warm Gas Desulfurization Process (WDP) technology, which effectively allows decoupling of the sulfur and CO 2 removal allowing for more flexibility in the selection of the CO 2 removal technology, plus associated advanced technologies for direct sulfur recovery and water gas shift (WGS). WDP has been demonstrated at pre-commercial scale using an activated amine carbon dioxide recovery process which would not have been possible if a majority of the sulfur had not been removed from the syngas by WDP. This pre-commercial demonstration of RTI’s advanced warm syngas cleanup system was conducted in parallel to the activities on this project. The technical data and cost information from this pre-commercial demonstration were extensively used in this project during the techno-economic analysis. With this project, both of RTI’s advanced WGS technologies were investigated. Because RT’s advanced fixed-bed WGS (AFWGS) process was successfully implemented in the WDP pre-commercial demonstration test mentioned above, this technology was used as part of RTI’s advanced warm syngas technology package for the techno-economic analyses for this project. RTI’s advanced transport-reactor-based WGS (ATWGS) process was still conceptual at the start of this project, but one of the tasks for this project was to evaluate the technical feasibility of this technology. In each of the three application-based comparison studies conducted as part of this project, the reference case was based on an existing Department of Energy National Energy Technology Laboratory (DOE/NETL) system study. Each of these references cases used existing commercial technology and the system resulted in > 90% carbon capture. In the comparison studies for the use of the hydrogen-rich syngas generated in either an Integrated Gasification Combined Cycle (IGCC) or a Coal-to-Methanol (CTM) plant, the comparison cases consisted of the reference case, a case with the integration of each individual advanced technology (either AR or RTI), and finally a case with the integration of all the advanced technologies (AR and RTI combined). In the Coal-to-Liquids (CTL) comparison study, the comparison study consisted of only three cases, which included a reference case, a case with just RTI’s advanced syngas cleaning technology, and a case with AR’s and RTI’s advanced technologies. The results from these comparison studies showed that the integration of the advanced technologies did result in substantial benefits, and by far the greatest benefits were achieved for cases integrating all the advanced technologies. For the IGCC study, the fully integrated case resulted in a 1.4% net efficiency improvement, an 18% reduction in capital cost per kW of capacity, a 12% reduction in the operating cost per kWh, and a 75–79% reduction in sulfur emissions. For the CTM case, the fully integrated plant resulted in a 22% reduction in capital cost, a 13% reduction in operating costs, a > 99% net reduction in sulfur emissions, and a reduction of 13–15% in CO 2 emissions. Because the capital cost represents over 60% of the methanol Required Selling Price (RSP), the significant reduction in the capital cost for the advanced technology case resulted in an 18% reduction in methanol RSP. For the CTL case, the fully integrated plant resulted in a 16% reduction in capital cost, which represented a 13% reduction in diesel RSP. Finally, the technical feasibility analysis of RTI’s ATWGS process demonstrated that a fluid-bed catalyst with sufficient attrition resistance and WGS activity could be made and that the process achieved about a 24% reduction in capital cost compared to a conventional fixed-bed commercial process.

08 HYDROGEN↗
DOE OSTI2018

Updating the Dry Transfer System - 18110

The Dry Transfer System (DTS) was examined for its ability to be redesigned in order to meet needs associated with repackaging used/spent nuclear fuel (UNF/SNF) from existing storage cask systems into alternative systems, while also incorporating design advances based on some lessons learned from Orano's dry UNF handling facility (T0) located at the La Hague recycling plant. In this redesign, the DTS is envisioned to provide some flexibility through the ability to perform repackaging activities from multiple differently designed cask systems, including those with canisters that will require cutting and welding activities, and potentially with waste packages designed for disposal. The redesigned DTS is also intended to provide some operational flexibility by providing lag storage and include a means for examining UNF/SNF during repackaging, using some features implemented at the T0 facility at La Hague. This paper provides a summary of: the original DTS design, which was evaluated by the NRC and portions of which were cold-tested at Idaho National Lab; the lag storage system designed for the DTS, which is able to flexibly handle different fuel assembly designs while providing structural support for design basis events (e.g., seismic); the incorporation of lessons learned from the La Hague T0 facility into the DTS design to facilitate dry handling of UNF/SNF; and identification of other challenges towards designing a complete system. A revised DTS is envisioned to provide an important tool for the future management of UNF/SNF in preparation for transportation, re-storage, re-transportation, and/or disposal and also provides a means for repackaging UNF/SNF in case recovery from a cask/canister system is necessary (e.g., due to extended storage or a transportation event). (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Engineering hierarchical nanochannels in graphene oxide membranes by etching and polydopamine intercalation for highly efficient dye recovery

Graphene oxide (GO) membranes have been extensively investigated for dye removal from wastewater, and they are often reduced or cross-linked to improve their stability, which, however, decreases water permeance. This study demonstrates an effective approach to enhance both durability and water permeance and retain dye rejection by synergistically integrating chemical etching using H 2 O 2 and intercalation with polydopamine (PDA) to create hierarchical nanochannels. The nanopores on the holey GO (HGO) shorten the diffusion path, while the PDA intercalation increases the channel sizes and stabilizes the GO nanosheets. Optimized membranes exhibit water permeance of 70–120 LMH/bar (much higher than state-of-the-art commercial polyamide membranes) and a Congo Red rejection of 98.5%, better than GO membranes reported in the literature. Moreover, a membrane with water permeance of 70 LMH/bar exhibits stable performance in a 3-day continuous crossflow filtration test. The versatile approach reported here may be applied to other two-dimensional materials to create hierarchical nanochannels for desired separations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Impact of different catalysis supported by oyster shells on the pyrolysis of tyre wastes in a single and a double fixed bed reactor

Highlights: • An innovative way in the disposal of tyre wastes with energy recovery by pyrolysis is proposed. • Performance of catalysts is improved by spreading them over layers of oyster shells. • One or two levels of supported catalytic beds may favor the quantity and/or the calorific value of the pyrolysis by-products. - Abstract: The treatment and disposal of tyres from vehicles has long been of considerable environmental importance. Studies have been undertaken to reduce their environmental impact. In this study, an alternative gas was produced from automobile tyre wastes by the means of a controlled pyrolysis. To do so, a novel catalytic system was designed with the aim of increasing the rate of conversion and improving the quality of the pyrolysis products. This work aimed also to reduce the severity of the overall reactions, by using powder catalysts (MgO, Al{sub 2}O{sub 3}, CaCO{sub 3}, and zeolite ZSM-5) uniformly distributed on two layers of oyster shells (OS) particles. The catalyst/tyres mass ratio was kept for all the tests at 1/30. The pyrolysis reactor was maintained at 500 °C and the influence of each catalyst and of the number of shell beds (0, 1 or 2), on the yield and composition of the derived products, was examined. The gas yields could contribute by 1.2% of total consumption in Tunisia. Furthermore, some combinations could upgrade the derived gas and made it possible to use it as such or with the minimum of post-treatment. It was found that, with the use of supported catalyst, the gas produced is 45% greater compared to classical thermal pyrolysis. The Heating value of the produced gas was also improved by the use of supported catalysts; it was found 16% greater with the use of Al{sub 2}O{sub 3}/OS compared to non-catalytic pyrolysis. When compared to the gas obtained from only one catalytic supported bed, the sulfur content was reduced by 80% with the use of CaCO{sub 3}/OS on two catalytic beds.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2017

Simulations of CO 2 injection into fractures and faults for improving their geophysical characterization at EGS sites

Here, we propose the use of CO 2 in push-pull well tests to improve geophysical identification and characterization of fractures and faults at enhanced geothermal system (EGS) sites. Using TOUGH2/ECO2N, we carried out numerical experiments of push-pull injection-production cycling of CO 2 into idealized vertical fractures and faults to produce pressure-saturation-temperature conditions that can be analyzed for their geophysical response. Our results show that there is a strong difference between injection and production mainly because of CO 2 buoyancy. While the CO 2 -plume grows laterally and upward during injection, not all CO 2 is recovered during the subsequent production phase. Even under the best conditions for recovery, at least 10% of the volume of the pores still remains filled with CO 2 . To improve EGS characterization, comparisons can be made of active seismic methods carried out before and after (time lapse mode) CO 2 injection into the fracture or fault. Here we find that across the CO 2 saturation range, C11 (the normal stiffness in the horizontal direction perpendicular to the fracture plane) varies between maximum and minimum values by about 15%. It reaches a maximum at around 6% gas saturation, decreasing exponentially to a minimum at higher saturations. Finally, our results suggest that CO 2 injection can be effectively used to infiltrate fault and fracture zones reaching about optimal saturation values in order to enhance seismic imaging at EGS sites.

58 GEOSCIENCES↗
DOE OSTI2023

Advancing the mechanical integrity and fragmentation behavior of reactive projectiles

A multivariant statistical approach was used to identify treatment conditions that improve the survivability of structural reactive material (SRM) projectiles upon launch and enhance energy release upon impact. The study included both mechanical testing of projectiles as well as their reactive characterization. The projectiles were launched in a high-velocity impact-ignition testing system and impacted an anvil for vented chamber calorimetry. This study examined a link between ultimate compressive stress and combustion performance. Two treatments were applied to consolidated aluminum projectiles including annealing and addition of silica (SiO 2 ) inclusions. Results showed annealing at moderate temperatures resulted in intact SRM projectiles upon launch. Adding small concentrations (1–2 wt. %) of SiO 2 to the SRM promoted fragmentation and combustion performance upon impact. Compared to the untreated projectiles, annealing with SiO 2 inclusion processing treatments improved the energy conversion efficiency from 37–84% (for untreated projectiles) up to 54–98%. In conclusion, increasing interparticle dislocation recovery by annealing while balancing inclusions promoting fragmentation upon impact was the key to optimizing combustion performance for SRM ballistic impact applications.

42 ENGINEERING↗
DOE OSTI2022

Flexible FlueCO2

Carbon dioxide (CO2) emission reductions remain a significant challenge on the path to clean energy. There are increasing legislative, social, and environmental factors motivating CO2 emissions reduction from power plants with carbon capture and storage (CCS). CCS in natural gas combined cycle (NGCC) power plants is critical to achieve a net-zero carbon electricity grid. Enhanced 45Q tax credits provide new incentives, but currently available technologies are unable to profitably operate in grids with deep variable renewable penetration which require flexible NGCC operation. Luna Labs has developed the FlueCO2 membrane to enable a profitable NGCC-CCS process. The FlueCO2 membrane couples steam transport across the membrane to CO2 transport in the opposite direction, enabling high capture efficiencies and low energy costs even at low CO2 concentrations. The dual-phase membrane can operate in the range of typical flue gas temperatures and pressures and does not require temperature or pressure cycling. Luna Labs’ FlueCO2 technology enables flexible and profitable operation of NGCC plants with lower capital investment and impact on electricity prices. In this Phase 1 project, Luna Labs utilized experimental testing, modeling, process simulation, and standardized costing methodologies to evaluate the techno-economic value of a 650 MW greenfield NGCC plant with FlueCO2 (NGCC-FlueCO2). Key design requirements for operation were established and plant performance under load-leveling conditions was validated through computational fluid dynamics and process modeling. Luna Labs developed a dynamic modeling tool which modeled plant operational modes across a variety of tax structures and electricity pricing scenarios to project the overall Net Present Value (NPV) of the NGCC-FlueCO2. FlueCO2 minimizes the impact of CCS integration on plant operation by integrating directly into the NGCC heat recovery steam generator (HRSG). By tapping into the plant’s low-pressure (LP) steam, operators can divert LP steam to the greenfield NGCC and/or CCS process in response to dynamic markets. Since FlueCO2 will not significantly affect HRSG (or NGCC) operation, CCS only turns off during peak power demand (>$250/MWh). Under baseload conditions, FlueCO2 lowers the capital (37%), energy (36%) and carbon capture (<$40/tonne) costs and can increase the overall plant lifetime NPV by approximately ~$1B in comparison with NGCC solvent-based capture reference cases (NETL Case 31B). Luna Labs has shared its costing tools with several interested partners and customers, which follows a generalizable approach to costing analysis.

Kelly, Jesse↗
DOE OSTI2024

Modeling and Scaling up of Membrane Modules Leveraging Dimensional Analysis

In the current analysis, we study the separation performance using membrane modules through dimensional analysis (DA). We formulate the main process equations to identify relevant dimensionless numbers inherent in the physics. In particular, we identify that the critical step in the separation process is mass transfer through the selective layer. Remarkably, the dimensionless feed flow (DFfeed) emerges as a crucial factor in describing this process. Not only does DFfeed directly appear in the governing equations, but it also holds a physical significance associated with the time scales for the mass transfer across the feed side and through the selective layer. Regarding the output performance variables, we consider the recovery, stage cut, productivity and purity. In this context, we profit from experimental data and CFD simulations to evaluate the separation performance of the modules when varying the input flowrate, the scale of the module, and the CO2 permeance. These datasets enable us to establish correlations between performance metrics and the dimensionless feed flow. Using simple power functions of DFfeed, we obtain R2 coefficients exceeding 0.99, indicating the accuracy of the correlations built in the present work. In the future, we wish to use DA to understand key transport mechanisms, predict and control module performance, and challenge the universality of these findings by testing various gas separations across different membrane modules beyond our case study.

Pedrozo, Hector A.↗
DOE OSTI2018

Differential depth distribution of microbial function and putative symbionts through sediment-hosted aquifers in the deep terrestrial subsurface

An enormous diversity of previously unknown bacteria and archaea has been discovered recently, yet their functional capacities and distributions in the terrestrial subsurface remain uncertain. Here, we continually sampled a CO 2 -driven geyser (Colorado Plateau, Utah, USA) over its 5-day eruption cycle to test the hypothesis that stratified, sandstone-hosted aquifers sampled over three phases of the eruption cycle have microbial communities that differ both in membership and function. Genome-resolved metagenomics, single-cell genomics and geochemical analyses confirmed this hypothesis and linked microorganisms to groundwater compositions from different depths. Autotrophic Candidatus “Altiarchaeum sp.” and phylogenetically deep-branching nanoarchaea dominate the deepest groundwater. A nanoarchaeon with limited metabolic capacity is inferred to be a potential symbiont of the Ca. “Altiarchaeum”. Candidate Phyla Radiation bacteria are also present in the deepest groundwater and they are relatively abundant in water from intermediate depths. During the recovery phase of the geyser, microaerophilic Fe- and S-oxidizers have high in situ genome replication rates. Autotrophic Sulfurimonas sustained by aerobic sulfide oxidation and with the capacity for N 2 fixation dominate the shallow aquifer. Overall, 104 different phylum-level lineages are present in water from these subsurface environments, with uncultivated archaea and bacteria partitioned to the deeper subsurface.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Deployment of the HFIRCON transport and depletion tool for plutonium-238 production studies

Irradiation of {sup 237}Np-bearing targets in Oak Ridge National Laboratory's (ORNL) High Flux Isotope Reactor (HFIR) results in the efficient production of {sup 238}Pu, which, in the form of heat source PuO{sub 2}, is used as a reliable power source for deep-space and planetary NASA missions. A technology demonstration subproject was initiated at ORNL in 2011 to develop and implement the technology required to establish a {sup 238}Pu supply chain. A systematic progression of NpO{sub 2}/Al cermet (20 vol.% NpO{sub 2}) activities to date has successfully demonstrated target fabrication, irradiation, and chemical recovery processes. Recent program tasks have included the development of the HFIRCON transport and depletion tool for efficient reactor physics analyses and the evaluation of increased NpO{sub 2} loadings (i.e., beyond 20 vol.%) and NpN-based targets. This paper documents the deployment of the HFIRCON code to assess various Np concentrations in NpO{sub 2}- and NpN-based targets in HFIR's inner small vertical experiment facilities. Results indicate that {sup 238}Pu production and quality can be enhanced with increased Np loadings; however, target conversion rates are reduced. The results recorded in this paper, thermal and material balance evaluations, and testing requirement planning will be used to determine whether increased NpO{sub 2} loadings or NpN-based targets will be further considered. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗