Search NASA⌕ Search

SEARCH · Search NASA

Results for “STANDARDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50

Curvaton decay by resonant production of the Standard Model higgs

We investigate in detail a model where the curvaton is coupled to the Standard Model higgs. Parametric resonance might be expected to cause a fast decay of the curvaton, so that it would not have time to build up the curvature perturbation. However, we show that this is not the case, and that the resonant decay of the curvaton may be delayed even down to electroweak symmetry breaking. This delay is due to the coupling of the higgs to the thermal background, which is formed by the Standard Model degrees of freedom created from the inflaton decay. We establish the occurrence of the delay by considering the curvaton evolution and the structure of the higgs resonances. We then provide analytical expressions for the delay time, and for the subsequent resonant production of the higgs, which ultimately leads to the curvaton effective decay width. Contrary to expectations, it is possible to obtain the observed curvature perturbation for values of the curvaton-higgs coupling as large as 10{sup −1}. Our calculations also apply in the general case of curvaton decay into any non Standard Model species coupled to the thermal background.

79 ASTRONOMY AND ASTROPHYSICS↗

Bounce inflation cosmology with Standard Model Higgs boson

It is of great interest to connect cosmology in the early universe to the Standard Model of particle physics. In this paper, we try to construct a bounce inflation model with the standard model Higgs boson, where the one loop correction is taken into account in the effective potential of Higgs field. In this model, a Galileon term has been introduced to eliminate the ghost mode when bounce happens. Moreover, due to the fact that the Fermion loop correction can make part of the Higgs potential negative, one naturally obtains a large equation of state(EoS) parameter in the contracting phase, which can eliminate the anisotropy problem. After the bounce, the model can drive the universe into the standard higgs inflation phase, which can generate nearly scale-invariant power spectrum.

79 ASTRONOMY AND ASTROPHYSICS↗

Searches for Physics beyond the Standard Model

The Thomas Jefferson National Accelerator Laboratory has the demonstrated ability to test the fundamental symmetries of nature to very great precision and thereby probe for new physics beyond the Standard Model (SM). In the following objectives and descriptions will be given of three Jefferson Laboratory (JLab) experiments: Qweak, MOLLER, and PVDIS. The Qweak experiment is to measure the weak charge of the proton (via the vector coupling of the Z0 boson to the proton). The MOLLER experiment is to measure the weak charge of the electron. The PV-DIS experiment will measure combinations of vector couplings and axial-vector couplings to the quarks of the nucleons. These three experiments follow from the advances made in precision parity-violating electron scattering measurements at the CEBAF of JLab. The Standard Model makes accurate predictions of the 'running' of the electroweak mixing angle or sin2(θw) from the Z0 pole down to low energies and therefore of the weak charges of the proton and electron. The Qweak experiment will make the first precision determination of the weak charge of the proton, Qpw = 1 – 4 sin2 (θw), from a measurement of the parity-violating asymmetry in the elastic scattering of longitudinally polarized electrons from the protons in a liquid hydrogen target at very low momentum transfer. The projected result will determine the proton's weak charge with a 4.1% total error and consequently sin2 (θw) with a 0.3% error. The Qweak experiment is at present three months into its commissioning run. The MOLLER experiment is to measure the parity-violating asymmetry in the scattering of 11 GeV longitudinally polarized electrons from the atomic electrons in a liquid hydrogen target. The longitudinal analyzing power Az is predicted to be 35.6 ppb at the kinematics of the experiment and is to be determined with a precision of 0.73 ppb, which would make the MOLLER experiment the most precise parity-violation experiment ever undertaken. The result would yield a measurement of the weak charge of the electron to 2.3% at an average Q2 value of 0.0056 (GeV/c)2 and in turn a determination of the electroweak mixing angle sin2(θw) with an uncertainty of ±0.00026 (stat) ±0.00013 (syst), comparable to the accuracy of the two best determinations at the Z0 pole. The PVDIS experiment is to measure the parity-violating asymmetry in deep inelastic scattering of longitudinally polarized electrons from an unpolarized deuterium target. The longitudinal analyzing power can be expressed in terms of the quark distribution functions of the deuterium target and the couplings C1q (axial electron x vector quark) and C2q (vector electron x axial quark), which in the Standard Model can be expressed in terms of sin2(θw).

08 HYDROGEN↗

The metagenomic data life-cycle: standards and best practices

Metagenomics data analyses from independent studies can only be compared if the analysis workflows are described in a harmonised way. In this overview, we have mapped the landscape of data standards available for the description of essential steps in metagenomics: (1) material sampling, (2) material sequencing (3) data analysis and (4) data archiving & publishing. Taking examples from marine research, we summarise essential variables used to describe material sampling processes and sequencing procedures in a metagenomics experiment. These aspects of metagenomics dataset generation have been to some extent addressed by the scientific community but greater awareness and adoption is still needed. We emphasise the lack of standards relating to reporting how metagenomics datasets are analysed and how the metagenomics data analysis outputs should be archived and published. We propose best practice as a foundation for a community standard to enable reproducibility and better sharing of metagenomics datasets, leading ultimately to greater metagenomics data reuse and repurposing.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

Electroweak precision data and the Lee-Wick standard model

We investigate the electroweak precision constraints on the recently proposed Lee-Wick standard model at tree level. We analyze low-energy, Z-pole (LEP1/SLC) and LEP2 data separately. We derive the exact tree-level low-energy and Z-pole effective Lagrangians from both the auxiliary field and higher derivative formulation of the theory. For the LEP2 data we use the fact that the Lee-Wick standard model belongs to the class of models that assumes a so-called 'universal' form which can be described by seven oblique parameters at leading order in m{sub W}{sup 2}/M{sub 1,2}{sup 2}. At tree level we find that Y=-m{sub W}{sup 2}/M{sub 1}{sup 2} and W=-m{sub W}{sup 2}/M{sub 2}{sup 2}, where the negative sign is due to the presence of the negative norm states. All other oblique parameters (S,X) and (T,U,V) are found to be zero. In the addendum we show how our results differ from previous investigations, where contact terms, which are found to be of leading order, have been neglected. The LEP1/SLC constraints are slightly stronger than LEP2 and much stronger than the low-energy ones. The LEP1/SLC results exclude gauge boson masses of M{sub 1}{approx_equal}M{sub 2}{approx}3 TeV at the 99% confidence level. Somewhat lower masses are possible when one of the masses assumes a large value. Loop corrections to the electroweak observables are suppressed by the standard {approx}1/(4{pi}){sup 2} factor and are therefore not expected to change the constraints on M1 and M{sub 2}. This assertion is most transparent from the higher derivative formulation of the theory.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Two dark matter components in dark matter extension of the minimal supersymmetric standard model and the high energy positron spectrum in PAMELA/HEAT data

We present a dark matter extension of the minimal supersymmetric standard model to give the recent trend of the high energy positron spectrum of the PAMELA/HEAT experiments. If the trend is caused indeed by dark matter, the minimal supersymmetric standard model needs to be extended. Here, we minimally extend the minimal supersymmetric standard model with one more dark matter component N together with a heavy lepton E and introduce the coupling e{sub R}E{sub R}{sup c}N{sub R}. This coupling naturally appears in the flipped SU(5) grand unification models. We also present the needed parameter ranges of these additional particles.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Radiative and semileptonic B decays involving the tensor meson K{sub 2}*(1430) in the standard model and beyond

We study semileptonic and radiative B decays involving the strange tensor meson K{sub 2}*(1430) in the final state. Using the large energy effective theory (LEET) techniques, we formulate the B{yields}K{sub 2}* transition form factors in large recoil region. All the form factors can be parametrized in terms of two independent LEET functions {zeta}{sub perpendicular} and {zeta}{sub ||} . The magnitude of {zeta}{sub perpendicular} is estimated from the data for B(B{yields}K{sub 2}*(1430){gamma}). Assuming a dipole q{sup 2} dependence for the LEET functions and {zeta}{sub ||} /{zeta}{sub perpendicular}=1.0{+-}0.2, for which the former consists with the QCD counting rules, and the latter is favored by the B{yields}{phi}K{sub 2}* data, we investigate the decays B{yields}K{sub 2}*l{sup +}l{sup -} and B{yields}K{sub 2}*{nu}{nu}, where the contributions due to {zeta}{sub ||} are suppressed by m{sub K{sub 2}}{sub *}/m{sub B}. For the B{yields}K{sub 2}*l{sup +}l{sup -} decay, in the large recoil region where the hadronic uncertainties are considerably reduced, the longitudinal distribution dF{sub L}/ds is reduced by 20-30% due to the flipped sign of c{sub 7}{sup eff} compared with the standard model result. Moreover, the forward-backward asymmetry zero is about 3.4 GeV{sup 2} in the standard model, but changing the sign of c{sub 7}{sup eff} yields a positive asymmetry for all values of the invariant mass of the lepton pair. We calculate the branching fraction for B{yields}K{sub 2}*{nu}{nu} in the standard model. Our result exhibits the impressed resemblance between B{yields}K{sub 2}*(1430)l{sup +}l{sup -}, {nu}{nu}, and B{yields}K*(892)l{sup +}l{sup -}, {nu}{nu}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for standard model Higgs boson production in association with a W boson using a neural network discriminant at CDF

We present a search for standard model Higgs boson production in association with a W boson in proton-antiproton collisions (pp{yields}W{sup {+-}}H{yields}l{nu}bb) at a center of mass energy of 1.96 TeV. The search employs data collected with the CDF II detector that correspond to an integrated luminosity of approximately 1.9 fb{sup -1}. We select events consistent with a signature of a single charged lepton (e{sup {+-}}/{mu}{sup {+-}}), missing transverse energy, and two jets. Jets corresponding to bottom quarks are identified with a secondary vertex tagging method, a jet probability tagging method, and a neural network filter. We use kinematic information in an artificial neural network to improve discrimination between signal and background compared to previous analyses. The observed number of events and the neural network output distributions are consistent with the standard model background expectations, and we set 95% confidence level upper limits on the production cross section times branching fraction ranging from 1.2 to 1.1 pb or 7.5 to 102 times the standard model expectation for Higgs boson masses from 110 to 150 GeV/c{sup 2}, respectively.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Prospects for observing the standard model Higgs boson decaying into bb final states produced in weak boson fusion with an associated photon at the LHC

One of the primary goals of the Large Hadron Collider is to understand the electroweak symmetry breaking mechanism. In the standard model, electroweak symmetry breaking is described by the Higgs mechanism which includes a scalar Higgs boson. Electroweak measurements constrain the standard model Higgs boson mass to be in the 114.4 to 157 GeV/c{sup 2} range. For m{sub h}<135 GeV/c{sup 2}, the Higgs predominantly decays into two b-quarks. As such, we investigate the prospect of observing the standard model Higgs decaying to bb produced in weak-boson-fusion with an associated central photon. An isolated, high p{sub T}, central photon trigger is expected to be available at the ATLAS and CMS experiments. In this study, we investigated the effects originating from showering, hadronization, the underlying event model, and jet performance including b-jet calibration on the sensitivity of this channel. We found that the choice of Monte Carlo simulation and its tune has a large effect on the efficacy of the central jet veto and consequently the signal significance. A signal significance of 1.6{sub -0.3}{sup +0.5} can be achieved for m{sub h}=115 GeV/c{sup 2} with 100 fb{sup -1} of integrated luminosity which correspond to 1 yr at design luminosity at 14 TeV pp collisions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Pseudoscalar boson and standard model-like Higgs boson productions at the LHC in the simplest little Higgs model

In the framework of the simplest little Higgs model, we perform a comprehensive study for the pair productions of the pseudoscalar boson {eta} and standard model-like Higgs boson h at LHC, namely gg(bb){yields}{eta}{eta}, gg(qq){yields}{eta}h, and gg(bb){yields}hh. These production processes provide a way to probe the couplings between Higgs bosons. We find that the cross section of gg{yields}{eta}{eta} always dominates over that of bb{yields}{eta}{eta}. When the Higgs boson h which mediates these two processes is on-shell, their cross sections can reach several thousand fb and several hundred fb, respectively. When the intermediate state h is off-shell, those two cross sections are reduced by 2 orders of magnitude, respectively. The cross sections of gg{yields}{eta}h and qq{yields}{eta}h are about in the same order of magnitude, which can reach O(10{sup 2} fb) for a light {eta} boson. Besides, compared with the standard model prediction, the cross section of a pair of standard model-like Higgs bosons production at LHC can be enhanced sizably. Finally, we briefly discuss the observable signatures of {eta}{eta}, {eta}h, and hh at the LHC.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Exact one-loop evolution invariants in the standard model

Guided by considerations of flavor symmetry, we construct a set of exact standard model renormalization group evolution invariants which link quark masses and mixing parameters. We examine their phenomenological implications and infer a simple combination of Yukawa coupling matrices which plays a unique role in the standard model, suggesting a possible new insight into the observed spectrum of quark masses. Our evolution invariants are readily generalized to the leptons in the case of Dirac neutrinos, but do not appear to be relevant for either quarks or leptons in the minimal supersymmetric standard model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for a Standard Model Higgs Boson in the H to ZZ to l(+)l(-)v(v)over-bar Decay Channel with the ATLAS Detector

A search for a heavy standard model Higgs boson decaying via H {yields} ZZ {yields} {ell}{sup +}{ell}{sup -} {nu}{bar {nu}}, where {ell} = e, {mu}, is presented. It is based on proton-proton collision data at {radical}s = 7 TeV, collected by the ATLAS experiment at the LHC in the first half of 2011 and corresponding to an integrated luminosity of 1.04 fb{sup -1}. The data are compared to the expected standard model backgrounds. The data and the background expectations are found to be in agreement and upper limits are placed on the Higgs boson production cross section over the entire mass window considered; in particular, the production of a standard model Higgs boson is excluded in the region 340 < m{sub H} < 450 GeV at the 95% confidence level.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Comparative Study of Standards for Grid-Connected Wind Power Plant in China and the U.S.

The rapid deployment of wind power has made grid integration and operational issues focal points in industry discussions and research. Compliance with grid connection standards for wind power plants (WPP) is crucial to ensuring the safe and stable operation of the electric power grid. The standards for grid-connected WPPs in China and the United States are compared in this paper to facilitate further improvements to the standards and enhance the development of wind power equipment. Detailed analyses in power quality, low-voltage ride-through capability, active power control, reactive power control, voltage control, and wind power forecasting are provided to enhance the understanding of grid codes in the two largest markets of wind power.

17 WIND ENERGY↗

Assessing operating characteristics of CAD algorithms in the absence of a gold standard

Purpose: The authors examine potential bias when using a reference reader panel as ''gold standard'' for estimating operating characteristics of CAD algorithms for detecting lesions. As an alternative, the authors propose latent class analysis (LCA), which does not require an external gold standard to evaluate diagnostic accuracy. Methods: A binomial model for multiple reader detections using different diagnostic protocols was constructed, assuming conditional independence of readings given true lesion status. Operating characteristics of all protocols were estimated by maximum likelihood LCA. Reader panel and LCA based estimates were compared using data simulated from the binomial model for a range of operating characteristics. LCA was applied to 36 thin section thoracic computed tomography data sets from the Lung Image Database Consortium (LIDC): Free search markings of four radiologists were compared to markings from four different CAD assisted radiologists. For real data, bootstrap-based resampling methods, which accommodate dependence in reader detections, are proposed to test of hypotheses of differences between detection protocols. Results: In simulation studies, reader panel based sensitivity estimates had an average relative bias (ARB) of -23% to -27%, significantly higher (p-value <0.0001) than LCA (ARB -2% to -6%). Specificity was well estimated by both reader panel (ARB -0.6% to -0.5%) and LCA (ARB 1.4%-0.5%). Among 1145 lesion candidates LIDC considered, LCA estimated sensitivity of reference readers (55%) was significantly lower (p-value 0.006) than CAD assisted readers' (68%). Average false positives per patient for reference readers (0.95) was not significantly lower (p-value 0.28) than CAD assisted readers' (1.27). Conclusions: Whereas a gold standard based on a consensus of readers may substantially bias sensitivity estimates, LCA may be a significantly more accurate and consistent means for evaluating diagnostic accuracy.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Validation for 2D/3D registration I: A new gold standard data set

Purpose: In this article, the authors propose a new gold standard data set for the validation of two-dimensional/three-dimensional (2D/3D) and 3D/3D image registration algorithms. Methods: A gold standard data set was produced using a fresh cadaver pig head with attached fiducial markers. The authors used several imaging modalities common in diagnostic imaging or radiotherapy, which include 64-slice computed tomography (CT), magnetic resonance imaging using Tl, T2, and proton density sequences, and cone beam CT imaging data. Radiographic data were acquired using kilovoltage and megavoltage imaging techniques. The image information reflects both anatomy and reliable fiducial marker information and improves over existing data sets by the level of anatomical detail, image data quality, and soft-tissue content. The markers on the 3D and 2D image data were segmented using ANALYZE 10.0 (AnalyzeDirect, Inc., Kansas City, KN) and an in-house software. Results: The projection distance errors and the expected target registration errors over all the image data sets were found to be less than 2.71 and 1.88 mm, respectively. Conclusions: The gold standard data set, obtained with state-of-the-art imaging technology, has the potential to improve the validation of 2D/3D and 3D/3D registration algorithms for image guided therapy.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

SU-E-T-93: Creation of Standardized APBI SAVI Cavities Using CT Registration

Purpose: Develop a consistent and rapid method of generating the initial cavity structure for Accelerated Partial Breast Irradiation (APBI) using the SAVI applicator. Methods: Four SAVI (Cianna Medical) applicators (6-1 Mini, 6-1, 8-1, and 10-1) were scanned on a CT simulator. The applicators were scanned in air with the CT slices (0.625mm axial thickness) perpendicular to the long axis of the applicator. Following scanning the CT images were transferred to Eclipse (Varian Medical Systems) and contours of the cavity were drawn. The cavity proximal and distal locations were defined according to MD specification. The scans and contours were then re-imported into the CT virtual simulation workstation.At the time of patient planning the appropriate applicator scan is anonymized and imported into Eclipse. In Brachytherapy Planning two Marker points are placed, one at the distal band location (cavity start) and the second at a defined distance along the applicator (cavity end). The actual patient scan is then registered to the applicator scan. A three point match is used to quickly get the two scans in approximate alignment. Manually matching is then used to fine tune the alignment of the cavity contour and Marker points. Results: The standard applicator scans have shown to agree well with the applicators in the patient scans. The time taken to register the scans has shown to be less than generating the cavities using the standard methods of contouring on the axial slices or using the dose shaper with sources in the central channel. Conclusion: The registration of a standard applicator scan and contour has improved the consistency in the generation of the initial cavity (SAVI) structure. Planning structures used for dose calculation are created with that structure as a starting point so accuracy and consistency are important for dose evaluation and plan comparison.

60 APPLIED LIFE SCIENCES↗

SU-E-P-22: AAPM Task Group 263 Tackling Standardization of Nomenclature for Radiation Therapy

Purpose: There is growing recognition of need for increased clarity and consistency in the nomenclatures used for body and organ structures, DVH metrics, toxicity, dose and volume units, etc. Standardization has multiple benefits; e.g. facilitating data collection for clinical trials, enabling the pooling of data between institutions, making transfers (i.e. hand-offs) between centers safer, and enabling vendors to define “default” settings. Towards this goal, the American Association of Physicists in Medicine (AAPM) formed a task group (TG263) in July of 2014, operating under the Work Group on Clinical Trials to develop consensus statements. Guiding principles derived from the investigation and example nomenclatures will be presented for public feedback. Methods: We formed a multi-institutional and multi-vendor collaborative group of 39 physicists, physicians and others involved in clinical use and electronic transfer of information. Members include individuals from IROC, NRG, IHE-RO, DICOM WG-7, ASTRO and EORTC groups with overlapping interests to maximize the quality of the consensus and increase the likelihood of adoption. Surveys of group and NRG members were used to define current nomenclatures and requirements. Technical requirements of vendor systems and the proposed DICOM standards were examined. Results: There is a marked degree of inter and intra institutional variation in current approaches, resulting from inter-vendor differences in capabilities, clinic specific conceptualizations and inconsistencies. Using a consensus approach, the group defined optimal formats for the naming of targets and normal structures. A formal objective assessment of 13 existing clinically-used software packages show that all had capabilities to accommodate these recommended nomenclatures. Conclusions: A multi-stakeholder effort is making significant steps forward in developing a standard nomenclature that will work across platforms. Our current working list includes > 550 structures. Outreach efforts are ongoing to ensure broader participation in evaluating and testing the principles as they are developed by TG263.

60 APPLIED LIFE SCIENCES↗

MO-D-BRD-04: NIST Air-Kerma Standard for Electronic Brachytherapy Calibrations

Electronic brachytherapy (eBT) has seen an insurgence of manufacturers entering the US market for use in radiation therapy. In addition to the established interstitial, intraluminary, and intracavitary applications of eBT, many centers are now using eBT to treat skin lesions. It is important for medical physicists working with electronic brachytherapy sources to understand the basic physics principles of the sources themselves as well as the variety of applications for which they are being used. The calibration of the sources is different from vendor to vendor and the traceability of calibrations has evolved as new sources came to market. In 2014, a new air-kerma based standard was introduced by the National Institute of Standards and Technology (NIST) to measure the output of an eBT source. Eventually commercial treatment planning systems should accommodate this new standard and provide NIST traceability to the end user. The calibration and commissioning of an eBT system is unique to its application and typically entails a list of procedural recommendations by the manufacturer. Commissioning measurements are performed using a variety of methods, some of which are modifications of existing AAPM Task Group protocols. A medical physicist should be familiar with the different AAPM Task Group recommendations for applicability to eBT and how to properly adapt them to their needs. In addition to the physical characteristics of an eBT source, the photon energy is substantially lower than from HDR Ir-192 sources. Consequently, tissue-specific dosimetry and radiobiological considerations are necessary when comparing these brachytherapy modalities and when making clinical decisions as a radiation therapy team. In this session, the physical characteristics and calibration methodologies of eBt sources will be presented as well as radiobiology considerations and other important clinical considerations. Learning Objectives: To understand the basic principles of electronic brachytherapy and the various applications for which it is being used. To understand the physics of the calibration and commissioning for electronic brachytherapy sources To understand the unique radiobiology and clinical implementation of electronic brachytherapy systems for skin and IORT techniques Xoft, Inc. contributed funding toward development of the NIST electronic brachytherapy facility (Michael Mitch).The University of Wisconsin (Wesley Culberson) has received research support funding from Xoft, Inc. Zoubir Ouhib has received partial funding from Elekta Esteya.

60 APPLIED LIFE SCIENCES↗