Search NASA⌕ Search

SEARCH · Search NASA

Results for “Shell model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

Surface Penetrating Radar Simulations for Jupiter's Icy Moons

The icy moons of Jupiter (Europa, Callisto, and Ganymede) are of similar overall composition but show different surface features as a result of different sub-surface processes. Furthermore, each of these moons could have a liquid ocean of water buried underneath the icy crust, but their depth can only be speculated. For Europa, estimates put the thickness of the ice shell anywhere between 2-30 km, with'a few models predicting up to 100 km. Much of the uncertainties are due to the largely unknown temperature gradients and levels of water impurities across different surface layers. One of the most important geological processes is the possible transportation of heat by ice convection. If the ice is convecting, then an upper limit of about 20 km is set for the depth of the ocean underneath. Convection leads to a sharp increase in temperature followed by a thick region of nearly constant temperature. If ice is not convecting, then an exponentially increasing temperature profile is expected. The crust is thought to be a mixture of ice and rock, and although the exact percentage of rock is not known, it is expected to be low. Additionally, the ice crust could contain salt, similar to sea ice on Earth. The exact amount of salt and how that amount changes with depth is also unknown. In preparation for the Jupiter Icy Moons Orbiter (JIMO) mission, we performed simulations for a surface-penetrating radar investigating signatures for different possible surface and sub-surface structures of these moons in order to estimate the applicability of using radar with a frequency range between 1 and 50 MHz. This includes simulations of power requirements, attenuation losses, layer resolutions for scenarios with and without the presence of a liquid ocean underneath the ice, cases of convecting and non-convecting ice, different impurities within the ice, and different surface roughnesses.

Markus, Thorsten↗
NASA NTRS2011

K-Shell Photoionization of Nickel Ions Using R-Matrix

We present R-matrix calculations of photoabsorption and photoionization cross sections across the K edge of the Li-like to Ca-like ions stages of Ni. Level-resolved, Breit-Pauli calculations were performed for the Li-like to Na-like stages. Term-resolved calculations, which include the mass-velocity and Darwin relativistic corrections, were performed for the Mg-like to Ca-like ion stages. This data set is extended up to Fe-like Ni using the distorted wave approximation as implemented by AUTOSTRUCTURE. The R-matrix calculations include the effects of radiative and Auger dampings by means of an optical potential. The damping processes affect the absorption resonances converging to the K thresholds causing them to display symmetric profiles of constant width that smear the otherwise sharp edge at the K-shell photoionization threshold. These data are important for the modeling of features found in photoionized plasmas.

Witthoeft, M. C.↗
NASA NTRS2013

Next-Generation MKIII Lightweight HUT/Hatch Assembly

The MK III (H-1) carbon-graphite/ epoxy Hard Upper Torso (HUT)/Hatch assembly was designed, fabricated, and tested in the early 1990s. The spacesuit represented an 8.3 psi (≈58 kPa) technology demonstrator model of a zero prebreathe suit. The basic torso shell, brief, and hip areas of the suit were composed of a carbon-graphite/epoxy composite lay-up. In its current configuration, the suit weighs approximately 120 lb (≈54 kg). However, since future planetary suits will be designed to operate at 0.26 bar (≈26 kPa), it was felt that the suit's re-designed weight could be reduced to 79 lb (≈35 kg) with the incorporation of lightweight structural materials. Many robust, lightweight structures based on the technologies of advanced honeycomb materials, revolutionary new composite laminates, metal matrix composites, and recent breakthroughs in fullerene fillers and nanotechnology lend themselves well to applications requiring materials that are both light and strong. The major problem involves the reduction in weight of the HUT/ Hatch assembly for use in lunar and/or planetary applications, while at the same time maintaining a robust structural design. The technical objective is to research, design, and develop manufacturing methods that support fa b rica - tion of a lightweight HUT/Hatch assembly using advanced material and geometric redesign as necessary. Additionally, the lightweight HUT/Hatch assembly will interface directly with current MK III hardware. Using the new operating pressure and current MK III (H-1) interfaces as a starting block, it is planned to maximize HUT/Hatch assembly weight reduction through material selection and geometric redesign. A hard upper torso shell structure with rear-entry closure and corresponding hatch will be fabricated. The lightweight HUT/Hatch assembly will retrofit and interface with existing MK III (H-1) hardware elements, providing NASA with immediate "plug-andplay" capability. NASA crewmembers will have a lightweight, robust, life-support system that will minimize fatigue during extraterrestrial surface sojourns. Its unique feature is the utilization of a new and innovative family of materials used by the aerospace industry, which at the time of this reporting has not been used for the proposed application.

McCarthy, Mike↗
NASA NTRS1994

GHRS observations of cool, low-gravity stars. 1: The far-ultraviolet spectrum of alpha Orionis (M2 Iab)

We present far-UV (1200-1930 A) observations of the prototypical red supergiant star alpha Ori, obtained with the Goddard High Resolution Spectrograph (GHRS) on the Hubble Space Telescope (HST). The observations, obtained in both low- (G140L) and medium- (G160/200M) resolution modes, unamibiguously confirm that the UV 'continuum' tentatively seen with (IUE) is in fact a true continuum and is not due to a blend of numerous faint emission features or scattering inside the IUE spectrograph. This continuum appears to originate in the chromospheric of the star at temperatures ranging from 3000-5000 K, and we argue that it is not related to previously reported putative companions or to bright spots on the stellar disk. Its stellar origin is further confirmed by overlying atomic and molecular absorptions from the chromosphere and circumstellar shell. The dominant structure in this spectral region is due to nine strong, broad absorption bands of the fourth-positive A-X system of CO, superposed on this continuum in the 1300-1600 A region. Modeling of this CO absorption indicates that it originates in the circumstellar shell in material characterized by T = 500 K, N(CO) = 1.0 x 10(exp 18) per sq cm, and V(sub turb) = 5.0 km per sec. The numerous chromospheric emission features are attributed mostly to fluorescent lines of Fe II and Cr II (both pumped by Lyman Alpha) and S I lines, plus a few lines of O I, C I, and Si II. The O I and C I UV 2 multiplets are very deficient in flux, compared to both the flux observed in lines originating from common upper levels but with markedly weaker intrinsic strength (i.e., O I UV 146 and C I UV 32) and to the UV 2 line fluxes seen in other cool, less luminous stars. This deficiency appears to be caused by strong self-absorption of these resonance lines in the circumstellar shell and/or upper chromosphere of alpha Ori. Atomic absorption features, primarily due to C I and Fe II are clearly seen in the G160M spectrum centered near 1655 A. These Fe II features are formed at temperatures that can occur only in the chromosphere of the star and are clearly not photospheric or circumstellar in origin.

Carpenter, Kenneth G.↗
NASA NTRS1981

High latitude H I shells in the Galaxy. I

A search has been made for H I shells in the 21-cm maps made by Heiles and Habing (1974) for absolute values of galactic latitude greater than 10 deg. A filter in the velocity dimension was used to enhance shell features over background gas. Positions, expansion velocities, column densities, and angular extents were measured for the 50 shells that were discovered. Incorporating distance estimates, masses and kinetic energies were estimated for the shells. A striking result was the failure of swept-up matter in a standard model for gas in the disk (density at the midplane approximately 1/cu cm; exponential scale height approximately 130 pc) to reproduce the observed shell column densities. While measured shell densities may be insufficiently corrected for background gas, the magnitude of this effect is too large to be explained by such a discrepancy alone. This may suggest that the shells seen in this survey occur in regions of relatively high density. The distribution of H I shells was compared with the distribution of other large-scale features in the Galaxy: H I shell structures are found to correlate with the positions of radio continuum loops I, II, and III, and to show little relation to the distribution of O and B stars.

Hu, E. M.↗
DOE OSTI2026

Mechanistic mass transfer in hollow fiber membrane solvent extraction for bio-based isobutanol

Membrane solvent extraction (MSE) has emerged as a promising method for selectively recovering bioproducts from complex aqueous streams. Bio-isobutanol, a next-generation feedstock for biofuel, remains challenging to recover because of its low concentration and the presence of inhibitory substances. This study explores the potential of hollow fiber (HF) MSE for bio-isobutanol recovery and systematically examines the coupled effects of fiber packing, shell-side flow dynamics, and aqueous chemistry on performance. A resistance-in-series model is applied to understand mass transfer in the HF MSE modules, quantify local resistances, and validate overall performance. The results show that increasing the fiber packing provides a larger interfacial area but induces poor flow distribution and channeling, hindering effective isobutanol transport. Meanwhile, increasing the shell-side velocity improves isobutanol recovery due to reductions in the boundary layer thickness. The presence of salts, added to mimic fermentation broth, increases the partition coefficient through salting-out effects, further improving isobutanol flux. A modified correlation for the shell-side mass transfer coefficient (k s,ϕ+v ), integrating geometric and hydrodynamic effects, was developed and validated. The proposed model achieves highly predictive accuracy (r 2 = 0.9808) across a wide range of conditions, outperforming previous models. The findings provide mechanistic insight into the interaction of geometric packing, hydrodynamics, and chemistry in governing mass transfer in HF MSE. Overall, this work demonstrates the potential of HF MSE for efficient bio-isobutanol recovery and also provides practical guidelines on critical factors (packing fraction, partition coefficient, and shell-side velocity), aiding in the design and scaling of MSE systems for resource recovery.

Aqueous chemistry↗
NASA NTRS2011

X-Ray Reflected Spectra from Accretion Disk Models. II. Diagnostic Tools for X-Ray Observations

We present a comprehensive study of the emission spectra from accreting sources. We use our new reflection code to compute the reflected spectra from an accretion disk illuminated by X-rays. This set of models covers different values of ionization parameter, solar iron abundance and photon index for the illuminating spectrum. These models also include the most complete and recent atomic data for the inner-shell of the iron and oxygen isonuclear sequences. We concentrate our analysis to the 2 - 10 keV energy region, and in particular to the iron K-shell emission lines. We show the dependency of the equivalent width (EW) of the Fe Ka with the ionization parameter. The maximum value of the EW is approx. 800 eV for models with log Epsilon approx. 1.5, and decreases monotonically as Epsilon increases. For lower values of Epsilon the Fe K(alpha) EW decreases to a minimum near log Epsilon approx. 0.8. We produce simulated CCD observations based on our reflection models. For low ionized, reflection dominated cases, the 2 -10 keV energy region shows a very broad, curving continuum that cannot be represented by a simple power-law. We show that in addition to the Fe K-shell emission, there are other prominent features such as the Si and S L(alpha) lines, a blend of Ar VIII-XI lines, and the Ca x K(alpha) line. In some cases the S xv blends with the He-like Si RRC producing a broad feature that cannot be reproduced by a simple Gaussian profile. This could be used as a signature of reflection.

Garcia, J.↗
NASA NTRS1980

Stellar winds, supernovae, and the origin of the H I supershells

It is shown that the H I shells and supershells, recently reported by Heiles, are a natural by-product of the interaction of the stellar winds and supernovae, originating from stars in typical OB associations, with the surrounding interstellar medium. The validity of this model is supported by its ability to reproduce observed characteristics of the shells such as the shell sizes and shapes as a function of their distances from the galactic center. This process may also be responsible for injecting synthesized elements into the galactic halo.

Bruhweiler, F. C.↗
NASA NTRS1996

Structural Concepts Study of Non-circular Fuselage Configurations

A preliminary study of structural concepts for noncircular fuselage configurations is presented. For an unconventional flying-wing type aircraft, in which the fuselage is inside the wing, multiple fuselage bays with non-circular sections need to be considered. In a conventional circular fuselage section, internal pressure is carried efficiently by a thin skin via hoop tension. If the section is non-circular, internal pressure loads also induce large bending stresses. The structure must also withstand additional bending and compression loads from aerodynamic and gravitational forces. Flat and vaulted shell structural configurations for such an unconventional, non-circular pressurized fuselage of a large flying-wing were studied. A deep honeycomb sandwich-shell and a ribbed double-wall shell construction were considered. Combinations of these structural concepts were analyzed using both analytical and simple finite element models of isolated sections for a comparative conceptual study. Weight, stress, and deflection results were compared to identify a suitable configuration for detailed analyses. The flat sandwich-shell concept was found preferable to the vaulted shell concept due to its superior buckling stiffness. Vaulted double-skin ribbed shell configurations were found to be superior due to their weight savings, load diffusion, and fail-safe features. The vaulted double-skin ribbed shell structure concept was also analyzed for an integrated wing-fuselage finite element model. Additional problem areas such as wing-fuselage junction and pressure-bearing spar were identified.

Mukhopadhyay, Vivel↗
NASA NTRS2016

Active Full-Shell Grazing-Incidence Optics

MSFC has a long history of developing full-shell grazing-incidence x-ray optics for both narrow (pointed) and wide field (surveying) applications. The concept presented in this paper shows the potential to use active optics to switch between narrow and wide-field geometries, while maintaining large effective area and high angular resolution. In addition, active optics has the potential to reduce errors due to mounting and manufacturing lightweight optics. The design presented corrects low spatial frequency error and has significantly fewer actuators than other concepts presented thus far in the field of active x-ray optics. Using a finite element model, influence functions are calculated using active components on a full-shell grazing-incidence optic. Next, the ability of the active optic to effect a change of optical prescription and to correct for errors due to manufacturing and mounting is modeled.

Full-shell↗
NASA NTRS2000

IMAGE EUV Observations and Modeling of the Plasmaspheric Density Trough Associated with the 24 May 2000 Geomagnetic Storm

The IMAGE EUV imager observed a plasmaspheric density trough in association with a geomagnetically active period on 24 May 2000. At EUV wavelengths, this density trough appeared as an Archimedes spiral extending from Earth's shadow to approximately 1800 MLT. We present an analysis of this density trough using simulated EUV images. Observational EUV images are subjected to edge analysis to establish the plasmapause L-shell and the location of the density trough in terms of L-shell, MLT extent, and radial width. The plasmaspheric density distribution is modeled using both static and dynamic models for the plasmasphere. The background plasmasphere is then numerically simulated using the 4-parameter plasmaspheric density model contained within the Global Core Plasma Model (GCPM) [Gallagher et al., 20001 and the Dynamic Global Core Plasma Model (DGCPM). Simulated EUV images of the model plasmasphere are produced once an artificial density depletion, matching the observed MLT extent and width, has been removed. Once the azimuthal extent and width of the trough have been simulated, the depth of the artificial density depletion is iteratively adjusted to produce simulated EUV images that approximate observation. The results of this analysis and discussion of possible origins for this density trough will be presented.

Adrian, M.L.↗
NASA NTRS2012

Simulating the Response of a Composite Honeycomb Energy Absorber: Dynamic Crushing of Components and Multi-Terrain Impacts - Part 1

This paper describes the experimental and analytical evaluation of an externally deployable composite honeycomb structure that is designed to attenuate impact energy during helicopter crashes. The concept, designated the Deployable Energy Absorber (DEA), utilizes an expandable Kevlar (Registered Trademark) honeycomb to dissipate kinetic energy through crushing. The DEA incorporates a unique flexible hinge design that allows the honeycomb to be packaged and stowed until needed for deployment. Experimental evaluation of the DEA included dynamic crush tests of multi-cell components and vertical drop tests of a composite fuselage section, retrofitted with DEA blocks, onto multi-terrain. Finite element models of the test articles were developed and simulations were performed using the transient dynamic code, LSDYNA (Registered Trademark). In each simulation, the DEA was represented using shell elements assigned two different material properties: Mat 24, an isotropic piecewise linear plasticity model, and Mat 58, a continuum damage mechanics model used to represent laminated composite fabrics. DEA model development and test-analysis comparisons are presented.

Jackson, Karen E.↗
DOE OSTI2024

Real-Time KMC Simulation of Vacancy-Mediated Intermixing in Au@Ag Octahedral Core–Cubic Shell Nanocrystals with Ab Initio-Guided Kinetics

Utilization of core–shell rather than monometallic nanocrystals (NCs) facilitates fine-tuning of NC properties for applications. However, compositional evolution via intermixing can degrade these properties prompting recent experimental studies. We develop an atomistic-level stochastic model for vacancy-mediated intermixing exploiting a formalism which allows incorporation at an ab initio density functional theory level of not just the thermodynamics of vacancy formation, but also relevant diffusion barriers for a vast number of possible local environments (in the core and in the shell, at the interface, and in the intermixed phase). This facilitates a predictive treatment and comprehensive understanding of intermixing on the relevant time scale (e.g., 10 1 –10 3 s). In contrast, previous modeling at the atomistic level utilized only unrealistic generic prescriptions of barriers or employed simplified continuum treatments. For Au@Ag octahedral core–cubic shell NCs, our modeling not only captures the experimentally observed rate or time scale for intermixing of ~100 s at 450 °C for 60 nm NCs, but also elucidates the underlying rate controlling processes and the effective intermixing barrier.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1979

Theory of global thermoremanent magnetization of planetary lithospheres in dipole fields of internal origin

A model is presented for the global thermoremanent magnetization of spherical lithospheres which cool in the presence of central dipole fields. Reversals and intensity variations of the field are incorporated in this model, which is applicable to bodies whose interiors have remained above the Curie point throughout their evolution. The model demonstrates that even considering Runcorn's (1975) magnetostatics theorems for spherical shells, a nonzero magnetic permeability and a finite cooling rate in the lithosphere permit the acquisition of a sizable global remanent dipole moment, which would be detectable by external measurements after the magnetizing field has disappeared. Preliminary application of this model to Mercury, Venus, and Mars suggests that only the combination of a nonreversing ancient source field with a surface value near 1 Oe plus a sizable concentration (about 1% by volume) of ferromagnetic material in their crusts could produce remanent planetary dipole fields as large as those measured by spacecraft. On the other hand, if ancient reversing dynamos existed in these planets, it is unlikely that large planetary-scale fields like those observed at Mercury could be due to remanence in their crusts, irrespective of their composition.

Srnka, L. J.↗
NASA NTRS1995

Evidence for elemental variation in the ejecta of the Tycho supernova remnant

We present an X-ray study of the Tycho supernova remnant utilizing archival data from the high-resolution imagers (HRIs) on Einstein and ROSAT, the low-energy imaging telescopes (LEITs) on EXOSAT, and spectral data from the Broad Band X-ray Telescope (BBXRT). We have made use of the differing HRI bandpasses to construct images of Tycho in two spectral bands, o.7-1.8 keV and 1.8-4.5 keV. We find that the two images differ, with the harder image showing enhanced emission along much of the south, west, and north periphery. There appears to be enhanced soft emission in the interior and in one particular knot of emission in the southeast. Besides continuum (which we model here as thermal bremsstrahlung emission), we believe the hard image shows primarily the distribution of high-ionization Si and S K-shell lines which lie in the 1.8-2.6 keV band, while the softer image has contributions from Si as well as Fe XVII to Fe XXIV L-shell lines in the 0.7-1.4 keV band. Guided by the results of nonequilibrium ionization modeling of the BBXRT spectral data, we interpret the observed contrast in hard and soft X-ray emission in terms of variations in abundance, ionization timescale, and temperature. The most likely explanation for the spectral differences are spatial variations of the relative abundances of Si, S, and Fe.

Vancura, O.↗
NASA NTRS2008

User-defined Material Model for Thermo-mechanical Progressive Failure Analysis

Previously a user-defined material model for orthotropic bimodulus materials was developed for linear and nonlinear stress analysis of composite structures using either shell or solid finite elements within a nonlinear finite element analysis tool. Extensions of this user-defined material model to thermo-mechanical progressive failure analysis are described, and the required input data are documented. The extensions include providing for temperature-dependent material properties, archival of the elastic strains, and a thermal strain calculation for materials exhibiting a stress-free temperature.

Knight, Norman F., Jr.↗
NASA NTRS2002

Plasmaspheric Density Troughs: Global IMAGE EUV Observations and Analysis via Global Core Plasma Modeling

To date, the IMAGE EUV camera has observed several plasmaspheric density trough features inside the plasmapause under a wide range of geomagnetic activity. From the perspective of EUV, a density trough feature appears as a channel of diminished pixel counts which spans a width of L-shell (DELTA L) and magnetic local time (MLT) inside the plasmapause. Plasmaspheric density troughs are found to be morphologically complex possessing considerable spatial and temporal variability. We present an analysis of the evolution of trough DELTA L and MLT extent as functions of associated D (sub ST) and K (sub p) history. Trough features range in size from 0.16 less than or equal to DELTA L less than or equal to 1.2 with azimuthal extent from 1500 less than or equal to MLT less than or equal to 1200. All cases of plasmaspheric density troughs studied to date appear to have evolved as a result of the inner edge of the afternoon/evening plasma drainage plume being wrapped around through the nightside plasmasphere. The structure of plasmaspheric density trough features is further probed by analyzing simulated EUV images produced by forward modeling artificially introduced regions of depleted density into both static and dynamic global core plasmaspheric models. Forward modeling suggests that (1) L-shell refilling of density troughs during storm recovery can be modeled as filling from the ionosphere toward the equator (i.e., bottom-up refilling), and (2) that an erosion process is operating within flux tubes beyond the outer L-shell wall of the observed density troughs.

Adrian, M. L.↗
DOE OSTI2025

StreamGen: Connecting Populations of Streams and Shells to Their Host Galaxies

In this work, we study how the abundance and dynamics of populations of disrupting satellite galaxies change systematically as a function of host galaxy properties. We apply a theoretical model of the phase-mixing process to classify intact satellite galaxies and stellar streamlike and shell-like debris in ∼1500 Milky Way–mass systems generated by a semi-analytic galaxy formation code, SatGen. In particular, we test the effect of host galaxy halo mass, disk mass, ratio of disk scale height to length, and stellar feedback model on disrupting satellite populations. We find that the counts of tidal debris are consistent across all host galaxy models, within a given host mass range, and that all models can have streamlike debris on low-energy orbits, consistent with that observed around the Milky Way. However, we find a preference for streamlike debris on lower-energy orbits in models with a thicker (lower-density) host disk or on higher-energy orbits in models with a more massive host disk. Importantly, we observe significant halo-to-halo variance across all models. These results highlight the importance of simulating and observing large samples of Milky Way–mass galaxies and accounting for variations in host properties when using disrupting satellites in studies of near-field cosmology.

dark matter↗