Search NASA⌕ Search

SEARCH · Search NASA

Results for “Solar diffuser”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Atmospheric corrosion model and monitor for low cost solar arrays

An atmospheric corrosion model and corrosion monitoring system has been developed for low cost solar arrays (LSA). The corrosion model predicts that corrosion rate is the product of the surface condensation probability of water vapor and the diffusion controlled corrosion current. This corrosion model is verified by simultaneous monitoring of weather conditions and corrosion rates at the solar array test site at Mead, Nebraska.

Kaelble, D. H.↗
NASA NTRS1984

Surface and allied studies in silicon solar cells

Significant improvements were made in the short-circuit current-decay method of measuring the recombination lifetime tau and the back surface recombination velocity S of the quasineutral base of silicon solar cells. The improvements include a circuit implementation that increases the speed of switching from the forward-voltage to the short-circuit conditions. They also include a supplementation of this method by some newly developed techniques employing small-signal admittance as a function of frequency omega. This supplementation is highly effective for determining tau for cases in which the diffusion length L greatly exceeds the base thickness W. Representative results on different solar cells are reported. Some advances made in the understanding of passivation provided by the polysilicon/silicon heterojunction are outlined. Recent measurements demonstrate that S 10,000 cm/s derive from this method of passivation.

Lindholm, F. A.↗
NASA NTRS1991

The sun's luminosity over a complete solar cycle

The Active Cavity Radiometer Irradiance Monitor (ACRIM I) measured the sun's luminosity from early 1980 to late 1989. The first account of the complete ACRIM I data set is presented and evidence is given which confirms that solar luminosity varies with the 11-yr solar cycle. This slow variation closely follows statistical measures of the distribution of magnetic and photospheric features on the solar surface. An exception to this correlation occurred in the form of a remarkable irradiance excess during 1980, at about the time of the sunspot maximum of solar cycle 21. The linkage, over a whole cycle, of luminosity variation to photospheric activity suggests the existence of an unknown physical mechanism other than the thermal diffusion model that explains luminosity deficits due to sunspots. Luminosity models connecting total irradiance to global indicators of solar activity are consistent with the gross features of the variability but fail to account for the 1980 irradiance excess.

Willson, Richard C.↗
NASA NTRS1980

Preliminary study of a solar selective coating system using black cobalt oxide for high temperature solar collectors

Black cobalt oxide coatings (high solar absorptance layer) were deposited on thin layers of silver or gold (low emittance layer) which had been previously deposited on oxidized (diffusion barrier layer) stainless steel substrates. The reflectance properties of these coatings were measured at various thicknesses of cobalt for integrated values of the solar and infrared spectrum. The values of absorptance and emittance were calculated from the measured reflectance values, before and after exposure in air at 650 C for approximately 1000 hours. Absorptance and emittance were interdependent functions of the weight of cobalt oxide. Also, these cobalt oxide/noble metal/oxide diffusion barrier coatings have absorptances greater than 0.90 and emittances of approximately 0.20 even after about 1000 hours at 650 C.

Mcdonald, G.↗
NASA NTRS1979

Automated Array Assembly, Phase 2

The solar cell module process development activities in the areas of surface preparation are presented. The process step development was carried out on texture etching including the evolution of a conceptual process model for the texturing process; plasma etching; and diffusion studies that focused on doped polymer diffusion sources. Cell processing was carried out to test process steps and a simplified diode solar cell process was developed. Cell processing was also run to fabricate square cells to populate sample minimodules. Module fabrication featured the demonstration of a porcelainized steel glass structure that should exceed the 20 year life goal of the low cost silicon array program. High efficiency cell development was carried out in the development of the tandem junction cell and a modification of the TJC called the front surface field cell. Cell efficiencies in excess of 16 percent at AM1 have been attained with only modest fill factors. The transistor-like model was proposed that fits the cell performance and provides a guideline for future improvements in cell performance.

Carbajal, B. G.↗
NASA NTRS2014

Observational Signatures of Magnetic Reconnection

Magnetic reconnection is often referred to as the primary source of energy release during solar flares. Directly observing reconnection occurring in the solar atmosphere, however, is not trivial considering that the scale size of the diffusion region is magnitudes smaller than the observational capabilities of current instrumentation, and coronal magnetic field measurements are not currently sufficient to capture the process. Therefore, predicting and studying observationally feasible signatures of the precursors and consequences of reconnection is necessary for guiding and verifying the simulations that dominate our understanding. I will present a set of such observations, particularly in connection with long-duration solar events, and compare them with recent simulations and theoretical predictions.

Savage, Sabrina↗
NASA NTRS1963

Low energy proton damage to solar cells.

Changes in silicon solar cells subjected to low energy proton bombardment, covering degradation of diffusion length, spectral response and efficiency under sun-like illumination

RADIATION EFFECT↗
NASA NTRS1972

A reliable all-silver front contact for silicon solar cells.

Methods have been found to apply an adherent and humidity resistant silver-only front contact to n on p silicon solar cells. The critical processing step was the removal of the diffused oxide layer. Humidity resistance is superior to present day commercial titanium-silver contacts and the electrical characteristics of the cells are excellent. Titanium, which is degraded by humidity and which is a source of heavy metal poisoning, has been eliminated from the contact.

Lamneck, J. H., Jr.↗
NASA NTRS1973

Radiation belts of Jupiter

The results of a theoretical study of the radiation belts of Jupiter are presented. The model of the electron radiation belt is based on the assumption that electrons from the solar wind are transported into the region near Jupiter by radial diffusion. The diffusion is driven by electric fields caused by an upper atmospheric dynamo in Jupiter's ionosphere. A proton radiation belt at Jupiter is predicted.

Stansberry, K. G.↗
NASA NTRS1974

Interplanetary diffusion coefficients for cosmic rays

Information on the cosmic-ray diffusion coefficient, kappa, derived from near-earth observations of the solar modulation of galactic electron fluxes and from the near-earth power spectra of the interplanetary magnetic field, has been used to study the heliocentric radial dependence of kappa, and to derive limits on the spatial extent of the solar modulation region. Representing kappa, as a separable function of radius r and rigidity, and assumming kappa(r) proportional to r to the n-th power, we can place a limit on the power law exponent, n not greater than 1.2. The distance of the modulation boundary is a function of n, and, e.g., for n = 0, falls into the range of 6-25 AU.

Cummings, A. C.↗
NASA NTRS1974

Corotating particle fluxes observed with the Pioneer 7 and IMP 4 spacecraft

Observations are reported of the time development of 17-MeV proton fluxes in four corotating particle streams during the five days required for corotation from Pioneer 7, about 70 E of earth in 1968, to IMP-4 at earth. The azimuthal width of the particle streams was observed to remain constant over the five days. Assuming either continuous or impulsive injection of particles at the sun, this observation is shown to imply that the azimuthal diffusion coefficient was significantly less than the value derived from recent solar flare observations (McKibben, 1972).

Mckibben, R. B.↗
NASA NTRS1977

Wave-particle interaction phenomena associated with shocks in the solar wind

Microscopic wave-particle interaction phenomena must generally affect the evolution of a traveling interplanetary discontinuity such as a collisionless shock, and solar wind plasma instabilities should also be associated with interplanetary acceleration, diffusion, and dissipation. Recent local measurements from diagnostics on widely separated spacecraft illustrate some examples of these interaction phenomena, and two bounding cases are considered in detail here. It is shown that the interplanetary shock of September 14, 1974 (detected on IMP-7, 8, Hawkeye-1, and Pioneer 11) was associated with intense local electrostatic noise and ion acceleration, while the shock of January 6, 1975 (detected on IMP-7 and Helios-1) had no detectable electrostatic turbulence.

Scarf, F. L.↗
NASA NTRS1980

Opto-electronic properties of cells made from various silicon forms

Opto-electronic properties of the various silicon forms were obtained from the solar cell performance. Performance parameters included the photovoltaic characteristics, minority carrier diffusion length, spectral response and small light spot scanning. Self consistent results were obtained from the various measurement techniques, which can provide useful information on sheet quality, as a potential for low cost terrestrial applications, and areas where the sheet formation methods can be improved.

Yoo, H.↗
NASA NTRS1981

Gamma Ray Astrophysics: New insight into the universe

Gamma ray observations of the solar system, the galaxy and extragalactic radiation are reported. Topics include: planets, comets, and asteroids; solar observations; interstellar medium and galactic structure; compact objects; cosmology; and diffuse radiation. The instrumentation used in gamma ray astronomy in covered along with techniques for the analysis of observational spectra.

Fichtel, C. E.↗
NASA NTRS1982

Importance of heterogeneous processes to tropospheric chemistry - Studies with a one-dimensional model

A one-dimensional, time-dependent model of tropospheric air composition is developed which incorporates several heterogeneous physical and chemical processes. The model includes the interaction of gases, aerosols, and hydrometeors through the physical mechanisms of nucleation, condensation, evaporation, coagulation, coalescence, and deliquescence. Precipitation, sedimentation, and dry deposition act to remove material from the atmosphere, while chemical transformations occur both in the vapor and the condensed phases. The model also incorporates the sources and vertical diffusion of gases and particles, as well as changes in the solar intensity caused by light-scattering from aerosols and clouds. Preliminary simulations made using this model indicate that rainout and washout processes strongly influence the distributions of tropospheric gases and aerosols under certain conditions.

Turco, R. P.↗
NASA NTRS1985

Telescoping Shield for Point-Focusing Solar Concentrators

Telescoping shield normally stowed around solar receiver protects heat engine and supporting structure from overheating when concentrator aimed few degrees away from line to Sun. When extended, shield intercepts off center concentrated solar radiation. Heat spread out over thermally conductive shield and reradiated diffusely not to cause structural damage.

Argoud, M.↗
NASA NTRS1984

Flat-plate solar array project process development area, process research of non-CZ silicon material

The program is designed to investigate the fabrication of solar cells on N-type base material by a simultaneous diffusion of N-type and P-type dopants to form an P(+)NN(+) structure. The results of simultaneous diffusion experiments are being compared to cells fabricated using sequential diffusion of dopants into N-base material in the same resistivity range. The process used for the fabrication of the simultaneously diffused P(+)NN(+) cells follows the standard Westinghouse baseline sequence for P-base material except that the two diffusion processes (boron and phosphorus) are replaced by a single diffusion step. All experiments are carried out on N-type dendritic web grown in the Westinghouse pre-pilot facility. The resistivities vary from 0.5 (UC OMEGA)cm to 5 (UC OMEGA)cm. The dopant sources used for both the simultaneous and sequential diffusion experiments are commercial metallorganic solutions with phosphorus or boron components. After these liquids are applied to the web surface, they are baked to form a hard glass which acts as a diffusion source at elevated temperatures. In experiments performed thus far, cells produced in sequential diffusion tests have properties essentially equal to the baseline N(+)PP(+) cells. However, the simultaneous diffusions have produced cells with much lower IV characteristics mainly due to cross-doping of the sources at the diffusion temperature. This cross-doping is due to the high vapor pressure phosphorus (applied as a metallorganic to the back surface) diffusion through the SiO2 mask and then acting as a diffusant source for the front surface.

Campbell, R. B.↗